RESUMO
Asymmetric mechanical transducers have important applications in energy harvesting, signal transmission, and micro-mechanics. To achieve asymmetric transformation of mechanical motion or energy, active robotic metamaterials, as well as materials with asymmetric microstructures or internal orientation, are usually employed. However, these strategies usually require continuous energy supplement and laborious fabrication, and limited transformation modes are achieved. Herein, utilizing wettability patterned surfaces for precise control of the droplet contact line and inner flow, we demonstrate a droplet-based mechanical transducer system, and achieve multimodal responses to specific vibrations. By virtue of the synergistic effect of surface tension and solid-liquid adhesion on the liquid dynamics, the droplet on the patterned substrate can exhibit symmetric/asymmetric vibration transformation when the substrate vibrates horizontally. Based on this, we construct arrayed patterns with distinct arrangements on the substrate, and employ the swarm effect of the arrayed droplets to achieve three-dimensional and multimodal actuation of the target plate under a fixed input vibration. Further, we demonstrate the utilization of the mechanical transducers for vibration management, object transport, and laser modulation. These findings provide a simple yet efficient strategy to realize a multimodal mechanical transducer, which shows significant potential for aseismic design, optical molding, as well as micro-electromechanical systems (MEMS).
RESUMO
For a drop on a very hot solid surface, a vapor film will form beneath the drop, which has been discovered by Leidenfrost in 1756. The vapor escaping from the Leidenfrost film causes uncontrollable flows, and actuates the drop to move around. Recently, although numerous strategies have been used to regulate the Leidenfrost vapor, the understanding of surface chemistry for modulating the phase-change vapor dynamics remains incomplete. Here, we report how to rectify vapor by "cutting" the Leidenfrost film using chemically heterogeneous surfaces. We demonstrate that the segmented film cut by a Z-shaped pattern can spin a drop, since the superhydrophilic region directly contacts the drop and vaporizes the water, while a vapor film is formed on the superhydrophobic surrounding to jet vapor and reduce heat transfer. Furthermore, we reveal the general principle between the pattern symmetry design and the drop dynamics. This finding provides new insights into the Leidenfrost dynamics modulation, and opens a promising avenue for vapor-driven miniature devices.
RESUMO
Heterostructures have attracted enormous interest due to the properties arising from the coupling and synergizing between multiscale structures and the promising applications in electronics, mechanics, and optics. However, it is challenging for current technologies to precisely integrate cross-scale micro/nanomaterials in three dimensions (3D). Herein, we realize the precise spatial allocation of nanoblocks on micromatrices and programmable 3D optical heterostructure patterning via printing-assisted self-assembly. This bottom-up approach fully exploits the advantages of printing in on-demand patterning, low cost, and mass production, as well as the merits of solution-based colloidal assembly for simple structuring and high-precision regulating, which facilitates the patterned integration of multiscale materials. Importantly, the luminescent nanoparticle assembly can be accurately coupled to the dye-doped polymer matrix by regulating the interface wettability, enabling facile multicolor tuning in a single heterostructure. Thus, the heterostructure can be specially encoded for anticounterfeiting and encryption applications due to the morphology-dependent and interface-coupling-induced luminescence. Moreover, with the capability to achieve single-nanoparticle resolution, these findings have great potential for designing photonic superstructures and advanced optical devices.
RESUMO
Nonlinear elastic materials are significant for engineering and micromechanics. Droplets with the merits of easy-accessibility, diversity, and energy-absorption capability exhibit a variety of non-Hookean elastic behaviors. Herein, benefiting from the confinement of heterogeneous-wettable parallel plates, the non-Hookean mechanics of the droplet-based spring are systematically investigated. Experimental results and theoretical analysis reveal that the force generated by the spring varies nonlinearly with its deformation, and a force model is accordingly built to depict the mechanics of springs with different sized/numbered droplets and confined by different wettability patterns. Importantly, for the droplet-based spring, the droplet-plate contact area expands nonlinearly with the pressing force, which is employed to optimize the output performance of the droplet-based triboelectric nanogenerator to 226% compared with the control test. This finding deepens the understanding of the non-Hookean behavior of droplet-based springs, and sheds light on applications in energy harvesting, micromechanics, and miniature optic/electric devices.
Assuntos
Molhabilidade , Fenômenos FísicosRESUMO
SignificanceAdjusting the floating states when objects float on water shows great potential for assembly, mineral flotation, nanostructured construction, and floating robot design, but the real-time regulation of floating states is challenging. Inspired by the different floating states of a falling fruit, we propose a facile strategy to transform the object between different floating states based on a three-segment three-phase contact line evolution. In addition, the potential of floating state transformation in solar-powered water evaporation, interface catalysis, and drug delivery is demonstrated. These findings provide insights into floating regulation and show great potential for floating-related applications.