Enhanced Catalytic Activity of Binuclear Oxidovanadium(IV) Bisbenzimidazole Linked Porphyrin Dimer for the Generation of Biologically Active 3,4-Dihydropyrimidinones and Their Corresponding Thiones.

Binuclear vanadyl(IV) porphyrin (V2BP), where two vanadium(IV) porphyrin macrocycles are linked through benzimidazole units at the ß-positions, has been prepared and characterized with various techniques, such as UV-vis, Fourier transform-infrared, electron paramagnetic resonance, cyclic voltammetry, density functional transform calculations, and mass spectrometry. V2BP exhibits a red shift (Δλmax = 10 nm) in the Soret band as compared with unsubstituted parent vanadyl(IV) meso-tetraphenylporphyrin (VP). The synthesized binuclear vanadyl(IV) porphyrin (V2BP) has further been studied as a catalyst to explore a single-pot multicomponent Biginelli reaction producing biologically active 3,4-dihydropyrimidin-2-(1H)-one (DHPM)-based biomolecules and the corresponding thiones under solvent-free conditions and its catalytic activity has been compared with vanadyl(IV) meso-tetraphenylporphyrin (VP). Several reaction conditions, such as the amount of catalyst, time, solvent, and temperature, have been optimized to obtain the maximum yield of DHPMs or thiones. The synthesized ß-functionalized V2BP porphyrin dimer manifests much higher conversion (84-95% yield) of DHPMs or the corresponding thiones under the optimized reaction conditions with high TON (4454-5037) and TOF (1113-1259 h-1) values for the one-pot multicomponent Biginelli reaction as compared to the literature. The catalyst exhibited excellent recyclability up to 10 cycles.

Positional, morphologic, and volumetric differences in TMJ in unilateral posterior crossbites and controls: A retrospective CBCT study.

OBJECTIVES: The objective of this study was to evaluate if there are any morphologic, positional, and volumetric differences in the temporomandibular joint (TMJ) of patients with unilateral posterior crossbite (UPC) compared to controls. Another objective was to analyse the discrepancy in the TMJ between the crossbite versus non-crossbite side in UPC versus right and left sides in controls. Additionally, this study aimed to evaluate the differences in the bone density at the masseteric insertion site at the angle of mandible in the UPC group and control group. MATERIAL AND METHODS: One hundred and thirty-two CBCTs were analysed with 66 patients in UPC group and 66 patients in control group (non-crossbite). Temporomandibular joint spaces - Anterior joint space (AJS), Superior joint space (SJS), Posterior joint space (PJS), Medial joint space (MJS), Middle joint space (MiJS), and Lateral joint space (LJS) were measured. Additionally, bone density at angle of mandible and volume of mandibular condyle were evaluated. The measurements were compared between the groups as well as between the crossbite and non-crossbite sides within the UPC group and between right and left sides within the control group. Furthermore, the associations between UPC and changes in TMJ regarding joint space availability, bone density, condylar head volume, and the effects of sex and age were evaluated using regression analysis. RESULTS: It was observed that UPC group showed a greater condylar volume, than the control group. Additionally, a larger mean discrepancy was observed between the crossbite side and non-crossbite side within the UPC group concerning condylar volume than controls. Concerning age, condylar volume was observed to be larger in adults than children. Adults showed significantly greater bone density and condylar volume than adolescents. Concerning sex, it was observed that males showed a larger SJS (right), MiJS, LJS, and bone density at the mandibular angle than females. CONCLUSION: There is a difference in the TMJ parameters particularly condylar volume in patients with UPC compared to controls.

Interdisciplinary Role of Orthodontist in Screening and Managing Obstructive Sleep Apnea in Children and Adults.

Obstructive sleep apnea (OSA) can affect children and adults, and, if left untreated, could have a major impact on the general and overall well-being of the patient. Dental health care providers and orthodontists have an interdisciplinary role in screening patients at risk for OSA and make a referral to establish a definitive diagnosis by a sleep physician. The gold standard of diagnostic testing is polysomnography. The adeno-tonsillar hypertrophy is the primary cause of sleep apnea in children; therefore, adeno-tonsillectomy must be the first line of treatment. Post adeno-tonsillectomy, if there is residual OSA due to underlying skeletal discrepancy, the patient may be referred to an orthodontist for appropriate management. Currently the evidence in the literature for prophylactic growth modification in children to prevent OSA is weak. In adults, the gold standard for managing OSA is Positive Airway Pressure (PAP) therapy; however, adherence to this treatment is rather low. The oral appliance (OA) therapy is an alternate for PAP intolerant patients and for mild to moderate OSA patients. The OA therapy has to be administered by a qualified dentist or orthodontist after careful examination of dental and periodontal health as well as any pre-existing joint conditions. The OA therapy could cause OA-associated malocclusion and patients have to be made aware of prior to initiating treatment. In patients with severe OSA, surgical maxilla-mandibular advancement (MMA) is highly effective.

Anthropometric investigation of cephalic parameters for stature estimation: Through regression analysis.

Background: Stature or body height is one of the most important and useful anthropometric parameters which determines the physical identity of an individual. Cranium encompasses hard tissue components with approximately immortal behavior, reason being cranial measurements were selected for the present study for estimation of stature. Objective: This investigation aimed to assess the stature of unknown using cephalometric parameters by creating equations through regression analysis. Materials and Methods: We selected 361 dental students for the present research; among them, 210 were females and 151 were males in the age range of 21-32 years. Stature and cephalic parameters, i.e., fronto-occipital circumference, head length, and head breadth were measured for each contributor following standard methods and techniques. Cephalic Index was calculated by using the formula: Cephalic Index (CI) = (Head width/Head length) ×100. Karl Pearson's correlation coefficient of stature with cephalic parameters was calculated, and regression analysis was done to generate the formulae for stature estimation. Results: Results indicated that all cephalic measurements have strong correlation with stature, and among them, circumference of head was found to be the most reliable predictor. Conclusion: Stature of unknown or deceased can be identified using cephalic parameters as an auxiliary practice.

Biomechanics of conventional and miniscrew-assisted rapid palatal expansion.

Posterior Crossbite is a common condition resulting because of transverse maxillary deficiency. The growth of the craniofacial complex finishes first in the transverse dimension, followed by sagittal and vertical dimensions. Conventional rapid palatal expansion (RPE) appliances are commonly used to correct transverse maxillary deficiency. Although RPE is efficient in correcting posterior crossbite, it results in dental side effects such as buccal tipping of maxillary molars, root resorption, bone dehiscence, and relapse. Mini-implant-assisted RPE has been introduced to increase the skeletal effects of expansion especially in patients with increased maturation and greater interdigitation of midpalatal suture. This article will review the biomechanics of RPE and mini-implant-assisted RPE. Additionally, the different designs of MARPE and the long-term clinical effects of expansion appliances will also be discussed in detail.

Does the Outcome of Graft Materials at Dental Implant Sites Differ Between Patients With Normal and Compromised Bone Health?

The objective of this paper was to assess the outcome of bone graft material at alveolar bone augmentation sites combined with dental implants in postmenopausal women with compromised bone health by evaluating cone beam computerized tomography (CBCT) scans at multiple time points.CBCT scans were analyzed on 55 postmenopausal women with compromised bone health status to determine the fate of alveolar bone augmentation. CBCT scans were taken immediately after surgery and 9 and 24 months postoperatively. The patient's medication regimens and durations were recorded, and the pixel intensity value (PIV) was measured and standardized using scoring criteria and visual assessment. Statistical analyses included 2-sample t tests for continuous variables and Fisher's exact tests for categorical variables.Among the normal patients, 73% received a grade 2 visual score, and 27% received a grade 1 visual score. After 24 months, 45% of patients received a grade 2 score, and 27% received a grade 3 score. In the osteoporotic group receiving medication, 77% of participants received a grade 1 visual score at the 9-month postoperative evaluation, while 23% received a grade 2 score. At the 24-month assessment, 55% of patients received a grade 1 score, 41% received a grade 2 score, and only 5% received a grade 3 score. Notably, although the graft material did not remodel into native bone, it was a scaffold for implants in controlled osteoporotic patients. The study's results show that the pixel intensity values of particulate graft materials are similar across the three different time points, suggesting that the graft material's pixel intensity value remains constant in postmenopausal women with osteoporosis. The study's limitations include a small sample size and a restricted 24-month follow-up period. This limited time frame may need to capture long-term changes or variations in graft materials adequately. Future research should include a larger sample size and have a longer follow-up duration to provide a more comprehensive understanding of the change in graft materials between patients with normal and compromised bone health.

Mandibular molar protraction: A comparison between fixed functional appliances and temporary anchorage devices.

INTRODUCTION: This study aimed to compare the efficiency of temporary anchorage devices (TADs) and fixed functional appliances (FFAs) for mandibular molar protraction. METHODS: Orthodontic records of 1050 consecutively treated patients with molar protraction were screened. Thirty-six records (22 females and 14 males; mean age, 17.4 years) were divided into two groups: TAD (21 subjects with 25 edentulous spaces) and FFA (15 subjects with 24 edentulous spaces). The primary outcome measure was the efficiency of protraction [magnitude and time required for protraction (rate) and anchor loss (AL)]. The secondary outcomes involved measuring the type of tooth movement (TOTM), external apical root resorption (EARR), alveolar bone height change (ABHC), alveolar bone width change (ABWC) and appliance failure. RESULTS: The rate of tooth movement was significantly higher for FFAs (0.83 ± 0.35 mm/month) versus TADs (0.49 ± 0.2 mm/month) (P = .005). Total treatment duration was less for FFAs (34.78 ± 8.1 months) versus TADs (47.72 ± 13.94 months) (P = .002). TOTM was similar for both (P = .909). EARR was 1.42 ± 1.38 mm for TAD and 1.25 ± 0.88 mm for FFA (P = .81). ABHC increased in the FFA group (1.01 ± 3.62 mm) and decreased for the TAD group (0.68 ± 1.66 mm). ABWC increased for both TAD (1.81 ± 1.73 mm) and FFA (1.75 ± 1.35 mm). The failure rate was 50% for FFAs and 33% for TADs. CONCLUSIONS: Both systems provided translation of lower molars with comparable anchorage control. However, FFAs were more efficient than TADs for lower molar protraction.

Evaluation of a 3D-Printed Cleft Palate Obturator Using a Low-Dose Cone Beam Computed Tomography Acquisition Protocol: A Proof-of-Concept Study.

Cone beam computed tomography (CBCT) technology is increasingly utilized in the head and neck region and is valuable in treatment planning for cleft palate patients, potentially enabling the creation of 3D-printed obturators to assist with feeding and speech. This technical report investigates the feasibility of using data from a 360-degree CBCT scan to accurately produce a cleft palate obturator and assesses whether a lower-dose 180-degree CBCT scan can achieve a comparable result. A simulated cleft palate was crafted on a dehydrated human skull, which was then scanned using both 360-degree and 180-degree CBCT scanning protocols. Two obturators were digitally designed based on the segmented images from each scan and subsequently 3D printed. Evaluation of the segmented images and 3D-printed obturators from both protocols demonstrated clear visualization of anatomical landmarks and identical scores across all parameters, suggesting that the 180-degree CBCT scan can produce an obturator of comparable quality to that of the 360-degree scan, with the added benefit of reduced radiation exposure.

The Utility of Cone Beam Computed Tomography Scans in Diagnosing and Treating Anterior Lesions of the Maxilla and Mandible.

BACKGROUND: The standard screening protocol for radiographic examination in dentistry as per the American Dental Association recommendations is a panoramic radiograph (PAN) and four horizontal bitewings. PAN inherently suffers from several shortcomings like the superimposition of anatomic structures, especially of the cervical spine that obscures a significant portion of the anterior maxilla and mandible. This region has a significant amount of pathology that is not adequately imaged. Three-dimensional (3D) imaging provides circumferential information on the area of interest and adds value to the diagnosis and treatment planning of pathology, especially in the anterior maxilla and mandible. However, there is not an adequate number of well-designed studies that articulate the true value addition of 3D imaging for the evaluation of this region. OBJECTIVES: The objective of this study is to evaluate the value addition of 3D imaging in diagnosing pathologies in the anterior maxilla and mandible when compared to two-dimensional PAN. MATERIALS AND METHODS: A total of 25 cases that had a diagnosis of anterior pathology and had both a PAN and a cone beam computed tomography (CBCT) scan were collected for this study. An institutional review board approval to retrospectively evaluate these data was obtained. The PAN and CBCT scans were randomly evaluated by a second-year dental student, an oral and maxillofacial radiology resident in training, and a board-certified oral radiologist. The scans were evaluated using a three-point modified Likert scale, where 1 represents "not visible or clear," 2 represents "visible but not clear," and 3 represents "visible and clear." The lesions were evaluated for characteristics like lesion location, size & shape, internal contents, borders of the lesion, cortical integrity, locularity, and effect on adjacent structures like root resorption. After the evaluation was completed, a comparison of the lesion diagnosis was done with histopathology to confirm the diagnosis. The evaluators were also asked to comment on the specific feature that 3D imaging provided that added value to the case. Kappa analysis was done to evaluate inter-operator reliability. RESULTS: PAN demonstrated significantly lower efficacy in identifying and diagnosing lesions. Only 56% of cases were analyzed using PAN, with 44% deemed undetectable or poorly visualized. These challenging cases necessitated CBCT scans for accurate diagnosis, which successfully diagnosed all 25 cases. The p-value of 0.0002 for PAN implies a highly significant difference from histopathology, suggesting the distinctions are not due to chance. Conversely, the p-value of 0.3273 for CBCT implies that observed differences may be random, lacking sufficient evidence to reject the null hypothesis. CBCT scans consistently outperformed PAN in visualizing various lesion characteristics, underscoring their superior diagnostic capabilities. CONCLUSIONS: In this study, with a small sample size, 3D imaging provided a significant value addition to the diagnosis and treatment planning by providing additional information regarding the location, extent, internal content, and effect on adjacent structures. The practical implications for clinical settings, along with comparisons to current literature, underscore the study's distinctiveness.

Content analysis of AI-generated (ChatGPT) responses concerning orthodontic clear aligners.

OBJECTIVES: To assess the accuracy of ChatGPT answers concerning orthodontic clear aligners. MATERIALS AND METHODS: A cross-sectional content analysis of ChatGPT generated responses to queries related to clear aligner treatment (CAT) was undertaken. A total of 111 questions were generated by three orthodontists based on a set of predefined domains and subdomains. The artificial intelligence (AI)-generated (ChatGPT) answers were extracted and their accuracy was determined independently by five orthodontists. The accuracy of answers was assessed using a prepiloted four-point scale scoring rubric. Descriptive statistics were performed. RESULTS: The total mean accuracy score for the entire set was 2.6 ± 1.1. It was noted that 58% of the AI-generated answers were scored as objectively true, 18% were selected facts, 9% were minimal facts, and 15% were false. False claims included the ability of CAT to reduce the need for orthognathic surgery (4.0 ± 0.0), improve airway function (3.8 ± 0.5), achieve root parallelism (3.6 ± 0.5), alleviate sleep apnea (3.8 ± 0.5), and produce more stable results compared to fixed appliances (3.8 ± 0.5). CONCLUSIONS: The overall level of accuracy of ChatGPT responses to questions concerning CAT was suboptimal and lacked citations to relevant literature. Ability of the software to offer current and precise information was limited. Therefore, clinicians and patients must be mindful of false claims and relevant facts omitted in the answers generated by ChatGPT.

Long-term evaluation of soft-tissue changes after miniscrew-assisted and conventional rapid palatal expansion using voxel-based superimposition of cone-beam computed tomography scans.

INTRODUCTION: This study aimed to evaluate the soft-tissue changes in the long-term after miniscrew-assisted rapid palatal expansion (MARPE) and conventional rapid palatal expansion (RPE) appliances compared with a matched control group using voxel-based superimposition of cone-beam computed tomography (CBCT) scans. METHODS: A total of 180 CBCTs for 60 patients at 3-time points were evaluated: pretreatment (T1), postexpansion (T2), and posttreatment (T3) for 3 groups: (1) MARPE, (2) RPE, and (3) controls (time-period T1 to T3: MARPE, 2 years 8 months; RPE, 2 years 9 months; control, 2 years 7 months). The voxel-based superimposition technique was used to superimpose the CBCT scans, after which the soft-tissue surfaces were extracted from the superimposed T1-CBCT, T2-CBCT, and T3-CBCT scans. Nine landmarks were identified on the CBCT scans: nasion, A-point, pogonion, right and left alar base, right and left zygoma, and right and left gonion. The coordinates of the 9 parameters were obtained in the x-axis, y-axis, and z-axis for the CBCT scans and subjected to statistical analyses. The changes in the soft-tissue surfaces were also evaluated by color-coded maps for short-term (T2) and long-term (T3) changes. The mean changes from T1 to T2 and T1 to T3 were tested against no change within the groups by paired t test, and the mean changes among the 3 groups were compared with analysis of variance F test with Tukey's Honest significant difference used for adjusting P values for multiple testing. RESULTS: In the short term, both MARPE and RPE led to a significant downward movement of pogonion, left gonion, and lateral movement of the right and left alar base compared with controls at T2 (P <0.05). In addition, MARPE led to a significant downward movement of right gonion than controls at T2 (P <0.05). Moreover, RPE led to a significant downward and forward movement of A-point and downward movement of the right and left alar base than controls at T2 (P <0.05). However, in the long-term, there were no significant differences in the soft-tissue changes among the MARPE, RPE, and control groups. CONCLUSIONS: MARPE and RPE do not lead to significant soft-tissue changes in the long term when compared with controls.

Skeletal and Dentoalveolar Changes With Mandibular Expansion in Growing Children.

Introduction The primary objective of this study was to quantitatively analyze the skeletal and dentoalveolar parameters following the mandibular expansion with a banded appliance. It was also part of the study to evaluate the amount of dental expansion and assess the change in the intermolar and individual first molar angulation. The basal bone parameters were compared to assess the skeletal effect of removable mandibular expansion appliance therapy. Methods In this retrospective cone beam computed tomography (CBCT) study, a total of 80 subjects with mandibular expansion therapy were screened. After imposing inclusion/exclusion criteria, 70 patients (40 females and 30 males) with a mean age of 8.8±1.24 years and 4.79±3.59 months were included. The mean expansion period was 3.04±1.61 months. Skeletal parameters such as buccal cortical thickness, buccal bone width, and cortical density were measured at 2mm from the alveolar crest, mid-root, and apex region in the coronal slice at the level of the mesiobuccal root of the first molar. Expansion parameters such as intermolar width, intermolar angulation, and individual molar angulation were also measured in the same slice. Finally, basal bone parameters such as inter-mental foramina distance and anterior arch perimeter were recorded. Results No significant difference (p>0.05) was found for most skeletal parameters following the expansion, except for the mid-root buccal bone width (p<0.05). On average, 4.54±2.53 mm of dental expansion (p<0.05) was achieved at the first molar region. Individual molar angulation showed a statistically significant difference (right = 7.46±7.91°, left = 7.53±7.18°, p=<0.05). The basal bone parameters showed no significant difference (p>0.05). Conclusions The mandibular expansion device leads to an increase in intermolar distance. The amount of expansion achieved with such devices is due to the buccal tipping of the molars. Skeletal effects such as cortical thickness, buccal bone width, or changes in the basal bone dimensions should not be expected with mandibular expansion therapy.

Evaluation of Skeletal and Dentoalveolar Changes in Patients With Class II Div 1 Malocclusion Treated With Twin Block Appliance.

Objective The study was focused on evaluating the change in mandibular morphology following the Twin Block appliance therapy and recording its effect on the maxilla and maxillary dentoalveolar complex. Also, the results of the Twin Block appliance between males and females were compared.  Material and methods In this two-armed retrospective cephalometric study, 30 patients (mean age 12 years) treated with Twin Block appliance for the period of 8-12 months were chosen, and their records were obtained to analyze. These results were compared with 15 control subjects of the same age group chosen from the American Association of Orthodontics Foundation (AAOF) growth legacy collection: Michigan Growth Study Class II subjects. Cephalometric tracing was done, and data was processed for descriptive statistical analysis. Results Paired sample t-test and ANOVA test were performed to evaluate the differences in the pre-treatment (T1) and post-functional (T2) values. ∠ANB showed a mean difference of -4.71°±1.55° for males and 6.22°±6.78° for females, which is significant. The mandibular length (Co-Gn), for male subjects, the mean difference was 5.14±1.74 mm, and for female subjects, it was 6±2mm, which is highly significant; 49.88% of skeletal changes and 50.12% of dentoalveolar changes were reported to bring about Class II correction with Twin Block. Conclusion A successful increase in mandibular length was achieved using a Twin Block as a functional appliance. Also, the significant maxillary restraining effect was recorded. More skeletal changes were observed in males than females.

Call for algorithmic fairness to mitigate amplification of racial biases in artificial intelligence models used in orthodontics and craniofacial health.

Machine Learning (ML), a subfield of Artificial Intelligence (AI), is being increasingly used in Orthodontics and craniofacial health for predicting clinical outcomes. Current ML/AI models are prone to accentuate racial disparities. The objective of this narrative review is to provide an overview of how AI/ML models perpetuate racial biases and how we can mitigate this situation. A narrative review of articles published in the medical literature on racial biases and the use of AI/ML models was undertaken. Current AI/ML models are built on homogenous clinical datasets that have a gross underrepresentation of historically disadvantages demographic groups, especially the ethno-racial minorities. The consequence of such AI/ML models is that they perform poorly when deployed on ethno-racial minorities thus further amplifying racial biases. Healthcare providers, policymakers, AI developers and all stakeholders should pay close attention to various steps in the pipeline of building AI/ML models and every effort must be made to establish algorithmic fairness to redress inequities.

Comparative Evaluation of a Lower-Dose CBCT Acquisition Protocol for Preoperative Implant Site Assessment in Dry Human Skulls: A Proof-of-Concept Study.

Restoration of edentulous sites with dental implants is increasingly becoming a popular choice. Cross-sectional 3-dimensional imaging using cone-beam computed tomography (CBCT) provides a better depiction of the implant site to help the clinician plan the procedure better. In spite of the advantages, radiation dose will always remain a concern. The evolution of lower-dose protocols is ongoing, but whether those acquisition protocols yield comparable diagnostic information is still not well established. The objective of this study was to evaluate the diagnostic efficacy of a low-dose, 180° rotational CBCT acquisition protocol for evaluating a potential implant site in comparison with a conventional 360° rotational acquisition. Ten dentate and partially edentulous dry human skulls providing 82 randomized implant sites-40 in the maxilla and 42 in the mandible-were chosen for this study. Each skull was imaged using a 360° and a 180° rotational acquisition on a J. Morita Accuitomo CBCT scanner. Evaluation of cortical and trabecular bone, height, width, and proximity to critical structures, such as the inferior alveolar nerve canal and the maxillary sinus, were measured. An oral surgeon and an oral radiologist rated the diagnostic efficacy of the scans by evaluating the above characteristics. Statistical evaluation of the data with linear regression showed significant agreement between both protocol measurements. Kappa analyses yielded a good interobserver agreement. In this proof-of-concept study, CBCT imaging using the lower-dose, modified arc, and 180° acquisition protocol shows comparable results to the conventional 360° protocol for preoperative implant assessment.

Point-of-Care Devices for Viral Detection: COVID-19 Pandemic and Beyond.

The pandemic of COVID-19 and its widespread transmission have made us realize the importance of early, quick diagnostic tests for facilitating effective cure and management. The primary obstacles encountered were accurately distinguishing COVID-19 from other illnesses including the flu, common cold, etc. While the polymerase chain reaction technique is a robust technique for the determination of SARS-CoV-2 in patients of COVID-19, there arises a high demand for affordable, quick, user-friendly, and precise point-of-care (POC) diagnostic in therapeutic settings. The necessity for available tests with rapid outcomes spurred the advancement of POC tests that are characterized by speed, automation, and high precision and accuracy. Paper-based POC devices have gained increasing interest in recent years because of rapid, low-cost detection without requiring external instruments. At present, microfluidic paper-based analysis devices have garnered public attention and accelerated the development of such POCT for efficient multistep assays. In the current review, our focus will be on the fabrication of detection modules for SARS-CoV-2. Here, we have included a discussion on various strategies for the detection of viral moieties. The compilation of these strategies would offer comprehensive insight into the detection of the causative agent preparedness for future pandemics. We also provide a descriptive outline for paper-based diagnostic platforms, involving the determination mechanisms, as well as a commercial kit for COVID-19 as well as their outlook.

Comparison of Lung Cancer Surgery Outcomes in Queensland for Indigenous and Nonindigenous Australians.

Introduction: Indigenous Australians (Aboriginal and Torres Strait Islander) have lower overall survival from lung cancer compared with nonindigenous Australians. Indigenous Australians receive higher rates of chemotherapy and/or radiotherapy. The equity of peri-operative care and thoracic surgical outcomes in Australian indigenous populations have not been contemporarily evaluated. Methods: We performed a retrospective registry analysis of the Queensland Cardiac Outcomes Registry Thoracic Database evaluating all adult lung cancer resections across Queensland from January 1, 2016 to April 20, 2022. Evaluating the time from diagnosis to surgery, operative data, and postoperative morbidity and mortality comparing Aboriginal and/or Torres Strait Islander people with nonindigenous Australians. Results: There were 31 patients (2.56%) of 1208 who identified as indigenous. The mean age at surgery was 68.2 years versus 66 years in the indigenous and nonindigenous, respectively (p = 0.23). There was female predominance among indigenous patients (n = 28, 90.32%, p < 0.01) and the average body mass index was lower (22.52 versus 27.09, p < 0.01). There was no variation in the surgical parameters or histopathologic distribution of cancer type between groups. Multivariable logistic regression analysis suggested that indigenous patients were at elevated risk of blood transfusion (relative risk 3.9, p = 0.014, OR = 9.01, 95% confidence interval [CI]: 2.25-36.33, p < 0.01) and had greater transfusion requirements (risk ratio 4.08, p = 0.0116 and OR = 12.67, 95% CI: 2.25-71.49, p < 0.01); however, the influence of low absolute number of transfusions must be acknowledged here. Indigenous status was not associated with increased intensive care unit admission (OR = 1.79, 95% CI: 0.17-18.80, p = 0.62), return to operating theater (OR = 2.1, 95% CI: 0.24-18.15, p = 0.50), new atrial fibrillation (OR = 0.52, 95% CI: 0.07-4.01, p = 0.55), prolonged air leak (OR = 0.29, 95% CI: 0.04- 2.16, p = 0.228), or pneumonia postoperatively (OR = 4.77, 95% CI: 0.55-41.71, p = 0.16). With only three deaths, no meaningful trends were observed. Time from diagnosis to surgery was comparable in the indigenous and nonindigenous groups (88.6 d, 95% CI: 54.26-123.24 versus 86.2 d, 81.40-91.02, p = 0.87). Postoperative length of stay was not numerically or statistically different between groups. (indigenous 7.54 d versus nonindigenous 7.13 d, p = 0.90). Conclusions: Indigenous patients are more likely to receive a blood transfusion than nonindigenous patients during lung resection. Reassuringly, the perioperative care provided to indigenous Australians undergoing lung resection in Queensland seems to be comparable to that of the nonindigenous population.