Exosomes encapsulated in hydrogels for effective central nervous system drug delivery.

The targeted delivery of pharmacologically active molecules, metabolites, and growth factors to the brain parenchyma has become one of the major challenges following the onset of neurodegeneration and pathological conditions. The therapeutic effect of active biomolecules is significantly impaired after systemic administration in the central nervous system (CNS) because of the blood-brain barrier (BBB). Therefore, the development of novel therapeutic approaches capable of overcoming these limitations is under discussion. Exosomes (Exo) are nano-sized vesicles of endosomal origin that have a high distribution rate in biofluids. Recent advances have introduced Exo as naturally suitable bio-shuttles for the delivery of neurotrophic factors to the brain parenchyma. In recent years, many researchers have attempted to regulate the delivery of Exo to target sites while reducing their removal from circulation. The encapsulation of Exo in natural and synthetic hydrogels offers a valuable strategy to address the limitations of Exo, maintaining their integrity and controlling their release at a desired site. Herein, we highlight the current and novel approaches related to the application of hydrogels for the encapsulation of Exo in the field of CNS tissue engineering.

Combining Step-Growth and Chain-Growth Polymerizations in One Pot: Light-Induced Fabrication of Conductive Nanoporous PEDOT-PCL Scaffold.

A novel method based on light-induced fabrication of a poly (3,4-ethylenedioxythiophene)-polycaprolactone (PEDOT-PCL) scaffold using phenacyl bromide (PAB) as a single-component photoinitiator is presented. HBr released from the step-growth polymerization of EDOT is utilized as an in situ catalyst for the chain-growth polymerization of ε-caprolactone. Detailed investigations disclose the formation of a self-assembled nanoporous electroconductive scaffold (1.2 mS cm-1 ). Fluorescence emission spectra of the fabricated scaffold exhibit a mixed solvatochromic behavior, indicating specific interactions between the self-assembled scaffold and solvents with varying polarities, as evidenced by transmission electron microscopy (TEM). Moreover, the same light-induced technique can also be applied for bulk photopolymerization showcasing the versatility and wide-ranging scope of the originated method. In brief, this study introduces a novel approach for light-induced polymerization reactions that is merging step-growth and chain-growth mechanisms. This innovative approach is promising to facilitate in situ polymerization of monomers possessing diverse functionalities.

Exploiting Visible-Light Induced Radical to Cation Transformation Pathway for Reactivity Enhanced Electrophilic Aromatic Substitution Polymerization of Heteroaromatics.

A straightforward approach is employed to synthesize methylene-bridged poly(hetero aromatic)s based on furan, pyrrole, thiophene, and thiophene derivatives. The process involves an electrophilic aromatic substitution reaction facilitated by a visible light-initiated system consisting of manganese decacarbonyl and an iodonium salt. The approach mainly relies on the formation of halomethylium cation, the attack of this cation to heteroaromatic, regeneration of methylium cation on the heteroaromatic, and reactivity differences between halomethylium and heteroaromatic methylium cations for successful polymerizations. This innovative synthetic strategy lead to the formation of polymers with relatively high molecular weights as the stoichiometric imbalance between the comonomers increased. Accordingly, these newly obtained polymers exhibit remarkable fluorescence properties, even at excitation wavelengths as low as 330 nm. Moreover, by harnessing the halogens at chain ends of homopolymers, block copolymers are successfully synthesized, offering opportunities for tailored applications in diverse fields.

Visible Light Induced Degradation of Poly(methyl methacrylate-co-methyl α-chloro acrylate) Copolymer at Ambient Temperature.

Poly(methyl methacrylate) (PMMA) is a well-known and widely used commodity plastic. High production amount of PMMA causes excessive waste creation that highlights the necessity of recycling. Conventional recycling methods require elevated temperatures to induce degradation or depolymerization. In this work, visible light induced photodegradation system by using dimanganese decacarbonyl (Mn2 (CO)10 ) with high halogen affinity is reported. Halide functional photodegradable polymers are prepared by copolymerization of methyl methacrylate and methyl α-chloroacrylate by conventional reversible addition-fragmentation chain-transfer polymerization. Synthesized copolymers are efficiently degraded to low molecular weight oligomers under visible light irradiation in the presence of Mn2 (CO)10 . Characteristics of precursors, degraded polymers, and kinetics of depolymerization are investigated by gel permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourrier transform infrared (FTIR), and proton nuclear magnetic resonance (1 H-NMR) spectroscopies. The reported approach is expected to trigger further development of more environmentally friendly recycling techniques in the near future as we  are moving toward a greener and more sustainable world.

Coumarinacyl Anilinium Salt: A Versatile Visible and NIR Photoinitiator for Cationic and Step-Growth Polymerizations.

A coumarinacyl anilinium (CAA) salt, facilely synthesized via a one-pot reaction, is shown to be a versatile visible and NIR photoinitiator for cationic and step-growth polymerizations. CAA salt exhibits superior photoinitiation performance as compared to commercial iodonium salt in cationic polymerization. Upon visible-light irradiation, this salt undergoes hemolytic and heterolytic cleavage and subsequent electron transfer and hydrogen abstraction reactions, forming reactive species capable of initiating cationic polymerization of epoxides and vinyl monomers. After a short irradiation period, polymerization also proceeds in the dark due to the non-nucleophilic nature of the counteranion. NIR-induced polymerizations were successfully conducted based on upconversion photochemistry. CAA salt can also initiate step-growth polymerization of N-ethyl carbazole (NEC) by oxidation of the monomer by the photochemically formed anilium radical cations. Subsequent proton release and radical coupling reactions essentially yield polycarbazole. CAA salt, featuring straightforward synthesis and long-wavelength sensitivity as well as versatile photoinitiating performance, has great potential in various applications.

Photoinitiated Cationic Ring-Opening Polymerization of Octamethylcyclotetrasiloxane.

Photochemical techniques have recently been revitalized as they can readily be adapted to different polymerization modes to yield a wide range of complex macromolecular structures. However, the implementation of the photoinduced cationic methods in the polymerization of cyclic siloxane monomers has scarcely been investigated. Octamethylcyclotetrasiloxane (D4) is an important monomer for the synthesis of polydimethylsiloxane (PDMS) and its copolymers. In this study, the cationic ring-opening polymerization (ROP) of D4, initiated by diphenyl iodonium hexafluorophosphate (DPI), has been studied. Both direct and indirect initiating systems acting at broad wavelength using benzophenone and pyrene were investigated. In both systems, photochemically generated protonic acids and silylium cations are responsible for the polymerization. The kinetics of the polymerization are followed by viscosimetry and GPC analyses. The reported approach may overcome the problems associated with conventional methods and therefore represents industrial importance for the fabrication of polysiloxanes.

Visible Light Induced High Resolution and Swift 3D Printing System by Halogen Atom Transfer.

3D printing technology offers solutions for numerous needs in industry and the daily life of individuals. In recent years, most research efforts have focused on this technology as the market share has grown and requirements have become specified in their related fields. In this work, a novel visible light induced 3D printing system with high resolution and short printing time using dimanganese decacarbonyl (Mn2 (CO)10 ) in combination with organic halides is reported. The radicals formed through halogen abstraction by photochemically generated manganese pentacarbonyl from organic halides with high quantum efficiency initiate the polymerization of acrylic resins. The kinetics of the process using various halide-containing molecules in the photoinitiaiting system are investigated with real-time fourrier transform infrared spectroscopy and photo-differential scanning calorimetry analyses, and the characteristics of 3D printouts are presented and compared with that of the commercial photoinitiator, 2,4,6-trimethylbenzoyl)phosphine oxide without Mn2 (CO)10 . The results obtained confirm that the combination of Mn2 (CO)10 and structurally diverse organic halides is a class of promising 3D system for various applications.

An unusual zig-zag 2D copper(I) coordination polymer as an outstanding catalyst for azide-alkyne "click" chemistry at room temperature.

A straightforward method for the synthesis of a two-dimensional (2D) new copper(I) coordination polymer, namely Cu(bzpdc), containing the ligand benzophenone 4,4'-dicarboxylate, and its effective use as catalyst for the azide-alkyne click chemistry at room temperature is reported. Zig-zag formation caused by cuprophilic interactions resulted in an unprecedented crystal structure with a very high copper content (45.5% by weight). The catalyst was stable up until 300 °C and tolerant to various solvents, including water. Cu(bzpdc) showed excellent catalytic activity for click reactions of several organic azides and alkynes having different functional groups at room temperature and is comparable to its homogenous analogues. The recyclability of Cu(bzpdc) was also tested and proven to be effective.

Dimanganese decacarbonyl catalyzed visible light induced ambient temperature depolymerization of poly(methyl methacrylate).

Recent years have witnessed an enormous development in photoinduced systems, opening up possibilities for advancements in industry and academia in terms of green chemistry providing environmentally friendly conditions and spatiotemporal control over the reaction medium. A vast number of research have been conducted on photoinduced systems focusing on the development of new polymerization methods, although scarcely investigated, depolymerization of the synthesized polymers by photochemical means is also possible. Herein, we provide a comprehensive study of visible light induced dimanganese decacarbonyl (Mn2(CO)10) assisted depolymerization system for poly(methyl methacrylate) with chlorine chain end prepared by Atom Transfer Radical Polymerization. Contrary to the conventional procedures demanding high temperatures, the approach offers ambient temperature for the photodepolymerization process. This novel light-controlled concept is easily adaptable to macroscales and expected to promote further research in the fields matching with the environmental concerns.

Phenacyl Bromide as a Single-Component Photoinitiator: Photoinduced Step-Growth Polymerization of N-Methylpyrrole and N-Methylindole.

The synthesis of step-growth polymers by photoinduced methods is a challenging issue in synthetic chemistry. Here, we report a single component near UV responsive photopolymerization system for step-growth polymerization of N-methylpyrrole (MPyr) and N-methylindole (MIn) by using phenacyl bromide (PAB). The obtained high molecular weight conjugated polymers were characterized by spectral and chromatographic methods. Detailed laser flash photolysis and spectroscopic studies revealed that polymerization proceeds by successive photoinduced cleavage of PAB followed by electron transfer, proton release and coupling processes. After photolysis, chain growth continues also in daylight or dark by acidic oxidation. The structural features of the polymers were investigated. PAB single component photoinitiator enables an efficient, rapid, room temperature step-growth polymerization process of MPyr and MIn that can be applied to other conjugated monomers.

Synthesis of Block Copolymers by Mechanistic Transformation from Reversible Complexation Mediated Living Radical Polymerization to the Photoinduced Radical Oxidation/Addition/Deactivation Process.

A versatile strategy for the fabrication of block copolymers by the combination of two discrete living polymerization techniques─reversible complexation mediated living radical polymerization (RCMP) and photoinduced radical oxidation addition deactivation (PROAD) processes─is reported. First, RCMP is conducted to yield poly(methyl methacrylate) with iodide end groups (PMMA-I). In the following step, PMMA-I is used as macroinitiator for living PROAD cationic polymerization of isobutyl vinyl ether. Successful formation of the block copolymers is confirmed by 1H NMR, FT-IR, GPC, and DSC investigations.

Fluorescent bioassay for SARS-CoV-2 detection using polypyrene-g-poly(ε-caprolactone) prepared by simultaneous photoinduced step-growth and ring-opening polymerizations.

The construction of a rapid and easy immunofluorescence bioassay for SARS-CoV-2 detection is described. We report for the first time a novel one-pot synthetic approach for simultaneous photoinduced step-growth polymerization of pyrene (Py) and ring-opening polymerization of ε-caprolactone (PCL) to produce a graft fluorescent copolymer PPy-g-PCL that was conjugated to SARS-CoV-2-specific antibodies using EDC/NHS chemistry. The synthesis steps and conjugation products were fully characterized using standard spectral analysis. Next, the PPy-g-PCL was used for the construction of a dot-blot assay which was calibrated for applications to human nasopharyngeal samples. The analytical features of the proposed sensor showed a detection range of 6.03-8.7 LOG viral copy mL-1 (Ct Scores: 8-25), the limit of detection (LOD), and quantification (LOQ) of 1.84 and 6.16 LOG viral copy mL-1, respectively. The repeatability and reproducibility of the platform had a coefficient of variation (CV) ranging between 1.2 and 5.9%. The fluorescence-based dot-blot assay was tested with human samples. Significant differences were observed between the fluorescence intensity of the negative and positive samples, with an overall correct response of 93.33%. The assay demonstrated a high correlation with RT-PCR data. This strategy opens new insights into simplified synthesis procedures of the reporter molecules and their high potential sensing and diagnosis applications.

Photoinduced Controlled/Living Polymerizations.

The application of photochemistry in polymer synthesis is of interest due to the unique possibilities offered compared to thermochemistry, including topological and temporal control, rapid polymerization, sustainable low-energy processes, and environmentally benign features leading to established and emerging applications in adhesives, coatings, adaptive manufacturing, etc. In particular, the utilization of photochemistry in controlled/living polymerizations often offers the capability for precise control over the macromolecular structure and chain length in addition to the associated advantages of photochemistry. Herein, the latest developments in photocontrolled living radical and cationic polymerizations and their combinations for application in polymer syntheses are discussed. This Review summarizes and highlights recent studies in the emerging area of photoinduced controlled/living polymerizations. A discussion of mechanistic details highlights differences as well as parallels between different systems for different polymerization methods and monomer applicability.

Visible Light Induced Conventional Step-Growth and Chain-Growth Condensation Polymerizations by Electrophilic Aromatic Substitution.

A novel visible light induced step-growth polymerization by electrophilic aromatic substitution between photochemically generated carbocations and dimethoxybenzene nucleophile is described. Conventional step-growth polymerization and chain-growth condensation polymerization (CCP) mechanisms are presented. It is found that by changing the molar ratios of the monomers slightly, the CCP mechanism becomes operative and relatively higher molecular weight polymers are obtained because of the higher reactivity of the end groups of the intermediates and oligomers than that of the monomers. The possibility of grafting onto polymers containing epoxide at their side chains by photoinduced chain end activation of poly(dimethoxyphenylene methylene) is demonstrated. This study is expected to promote potential applications of the combination of photoinduced electron transfer reactions and CCP in macromolecular synthesis and material science.

Exfoliated black phosphorous-mediated CuAAC chemistry for organic and macromolecular synthesis under white LED and near-IR irradiation.

The development of long-wavelength photoinduced copper-catalyzed azide-alkyne click (CuAAC) reaction routes is attractive for organic and polymer chemistry. In this study, we present a novel synthetic methodology for the photoinduced CuAAC reaction utilizing exfoliated two-dimensional (2D) few-layer black phosphorus nanosheets (BPNs) as photocatalysts under white LED and near-IR (NIR) light irradiation. Upon irradiation, BPNs generated excited electrons and holes on its conduction (CB) and valence band (VB), respectively. The excited electrons thus formed were then transferred to the CuII ions to produce active CuI catalysts. The ability of BPNs to initiate the CuAAC reaction was investigated by studying the reaction between various low molar mass alkyne and azide derivatives under both white LED and NIR light irradiation. Due to its deeper penetration of NIR light, the possibility of synthesizing different macromolecular structures such as functional polymers, cross-linked networks and block copolymer has also been demonstrated. The structural and molecular properties of the intermediates and final products were evaluated by spectral and chromatographic analyses.

A Novel Photoinduced Ligation Approach for Cross-Linking Polymerization, Polymer Chain-End Functionalization, and Surface Modification Using Benzoyl Azides.

Various ligation processes have recently become a powerful tool in synthetic polymer chemistry. Herein, the use of a new photochemical ligation process as a versatile approach for the cross-linking polymerization, functionalization of polymer chain ends, and surface modification of various materials such as silica and graphene oxide, is demonstrated. The process is based on the formation of urethane linkages by the reaction of photochemically in situ generated isocyanates from benzoyl azides with hydroxyl moieties in the presence of organobase, bicyclo[2.2.2]-1,4-diazaoctane (DABCO) under ambient conditions. The intermediates and obtained materials are characterized by NMR, FTIR, TGA, and TEM analyses. It is believed that this simple and efficient ligation process will expand future applications to fabricate complex macromolecular structures, biomaterials, and gels.

Phenacyl Phenothiazinium Salt as a New Broad-Wavelength-Absorbing Photoinitiator for Cationic and Free Radical Polymerizations.

A novel broad-wavelength-absorbing photoinitiator based on phenacyl phenothiazinium hexafluroantimonate (P-PTh) possessing both phenacyl and phenothiazine chromophoric groups was reported. P-PTh absorbs light at UV, Visible and Near-IR region. Photophysical, photochemical, and computational investigations revealed that P-PTh in solution decomposes at all wavelengths by homolytic and heterolytic cleavages and generates cationic and radical species, which could efficiently initiate cationic and free radical polymerizations. It is anticipated that the photoinitiator with such wavelength flexibility may open up new pathways in curing applications of formulations of pigment systems.

Visible light induced step-growth polymerization by electrophilic aromatic substitution reactions.

A novel visible light induced step-growth polymerization to form poly(phenylene methylene) by electrophilic aromatic substitution reactions is described. The effect of different nucleophilic aromatic molecules on polymerization has been investigated. The possibility of combining step-growth polymerization with conventional free radical and free radical promoted cationic polymerizations through photoinduced chain-end activation has been demonstrated. Highly fluorescent fibers of the resulting block copolymers were obtained using the electrospinning technique. The versatile photoinduced step-growth polymerization process reported herein paves the way for a new generation of polycondensates and their combination with chain polymers that cannot be obtained by conventional methods.

Visible Light Induced Step-Growth Polymerization by Substitution Reactions.

A new visible light induced step-growth polymerization of dibromoxylene, and diols using dimanganese decacarbonyl and diphenyliodonium salt is described. The polymerization is suggested to proceed by substitution reaction between dixylenium cations formed upon visible light irradiation in the presence of dimanganese decacarbonyl and diphenyl iodonium salt. For the described substitution reaction with diols as nucleophilic component, the scope of the process is studied. Furthermore, the presence of halide groups at chain ends of the resulting polymers provided the possibility of initiating subsequent free radical and free radical promoted cationic resulting in the formation of polyether-based block copolymers.

Expanding the Scope of 2D Black Phosphorus Catalysis to the Near-Infrared Light Initiated Free Radical Photopolymerization.

In the drive toward the development of efficient and stable inorganic semiconductor materials with broadband solar absorption ability to induce various photochemical processes is a highly attractive research field. In this study, two-dimensional (2D) few-layer black phosphorus (BP) exfoliated in a solvent is utilized as photocatalyst to initiate the polymerization of various monomers under visible and near-IR (NIR) light irradiation. Upon the light exposure, few-layer BP generates excited electrons and holes, which undergo electron transfer reactions with the onium salts to form free radicals capable of initiating free radical polymerization. Among the onium salts tested, aryldiazonium salt was found to be the most efficient in the photopolymerization process owing to its favorable reduction potential with the conduction edge potential of BP. The presented strategy also provides the possibility for the in situ preparation of BP-polymer composite materials.