The Effects of Iron Rust on the Ageing of Woods and Their Derived Pulp Paper.

The accelerated ageing of wood in terms of heating or iron rusting has a potential effect on the physio-mechanical, chemical and biological properties of wood. The effects of accelerated ageing on the mechanical, physical and fungal activity properties of some wood materials (Schinus terebinthifolius, Erythrina humeana, Tectona grandis, Pinus rigida and Juglans nigra) were studied after several cycles of heating and iron rusting. The fungal activity was assayed against the growth of Aspergillus terreus, Aspergillus niger, Fusarium culmorum and Stemphylium solani. In addition, the mechanical and optical properties of paper sheets produced from those wood pulps by means of Kraft cooking were evaluated. The mechanical and chemical properties of the studied wood species were affected significantly (p < 0.05) by the accelerated ageing, compared to control woods. With Fourier transform infrared (FTIR) spectroscopy, we detected an increase in the intensity of the spectra of the functional groups of cellulose in the heated samples, which indicates an increase in cellulose content and decrease in lignin content, compared to other chemical compounds. For pulp properties, woods treated by heating showed a decrease in the pulp yield. The highest significant values of tensile strength were observed in pulp paper produced from untreated, heated and iron-rusted P. rigida wood and they were 69.66, 65.66 and 68.33 N·m/g, respectively; we calculated the tear resistance from pulp paper of untreated P. rigida (8.68 mN·m2/g) and T. grandis (7.83 mN·m2/g) and rusted P. rigida (7.56 mN·m2/g) wood; we obtained the values of the burst strength of the pulp paper of untreated woods of P. rigida (8.19 kPa·m2/g) and T. grandis (7.49 kPa·m2/g), as well as the fold number of the pulp paper of untreated, heated and rusted woods from P. rigida, with values of 195.66, 186.33 and 185.66, respectively. After 14 days from the incubation, no fungal inhibition zones were observed. Accelerated ageing (heated or iron-rusted) produced significant effects on the mechanical and chemical properties of the studied wood species and affected the properties of the produced pulp paper.

Antifungal Activities of Wood and Non-Wood Kraft Handsheets Treated with Melia azedarach Extract Using SEM and HPLC Analyses.

The main objective of this work was to evaluate pulp produced by kraft cooking for wood materials (WMT) (Bougainvillea spectabilis, Ficus altissima, and F. elastica) and non-wood materials (NWMT) (Sorghum bicolor and Zea mays stalks) and to study the fungal activity of handsheets treated with Melia azedarach heartwood extract (MAHE) solutions. Through the aforementioned analyses, the ideal cooking conditions were determined for each raw material based on the lignin percentage present. After cooking, pulp showed a decrease in the Kappa number produced from WMT, ranging from 16 to 17. This was in contrast with NWMT, which had Kappa numbers ranging from 31 to 35. A difference in the optical properties of the pulp produced from WMT was also observed (18 to 29%) compared with pulp produced from NWMT (32.66 to 35.35%). As for the evaluation of the mechanical properties, the tensile index of the pulp ranged from 30.5 to 40 N·m/g for WMT and from 44.33 to 47.43 N·m/g for NWMT; the tear index ranged from 1.66 to 2.55 mN·m2/g for WMT and from 4.75 to 5.87 mN·m2/g for NWMT; and the burst index ranged from 2.35 to 2.85 kPa·m2/g for WMT and from 3.92 to 4.76 kPa·m2/g for NWMT. Finally, the double fold number was 3 compared with that of pulp produced from pulp, which showed good values ranging from 36 to 55. In the SEM examination, sheets produced from treated handsheets with extract from MAHE showed no growth of Aspergillus fumigatus over paper discs manufactured from B. speclabilis pulp wood. Pulp paper produced from Z. mays and S. bicolor stalks was treated with 1% MAHE, while pulp paper from F. elastica was treated with 0.50% and 1% MAHE. With the addition of 0.5 or 1% MAHE, Fusarium culmorum showed no increase in growth over the paper manufactured from B. speclabilis, F. altissima, F. elastica and Zea mays pulps with visual inhibition zones found. There was almost no growth of S. solani in paper discs manufactured from pulps treated with 1% MAHE. This is probably due to the phytochemical compounds present in the extract. The HPLC analysis of MAHE identified p-hydroxybenzoic acid, caffeine, rutin, chlorogenic acid, benzoic acid, quinol, and quercetin as the main compounds, and these were present in concentrations of 3966.88, 1032.67, 834.13, 767.81, 660.64, 594.86, and 460.36 mg/Kg extract, respectively. Additionally, due to the importance of making paper from agricultural waste (stalks of S. bicolor and Z. mays), the development of sorghum and corn with high biomass is suggested.

Impact of Three Natural Oily Extracts as Pulp Additives on the Mechanical, Optical, and Antifungal Properties of Paper Sheets Made from Eucalyptus camaldulensis and Meryta sinclairii Wood Branches.

In the pulp and paper industry, several studies have been done to improve and enhance the properties of the mechanical, optical, and antimicrobial activities of pulp produced with different additives. In the present study, pulp of wood branches (WBs) from Eucalyptus camaldulensis Dehnh. and Meryta sinclairii (Hook.f.) Seem. was treated with n-hexane oily extracts (HeOE) from Melia azedarach L. fruits, Magnolia grandiflora L. leaves, and Sinapis alba L. seeds as additives at concentrations of 1%, 3%, and 5% based on oven-dry pulp weight. Measured mechanical properties were higher in paper sheets made from E. camaldulensis than M. sinclairii WB pulp. The highest tensile index values were observed with E. camaldulensis WB pulp treated with 5% HeOEs of S. alba (33.90 N·m/g) and M. grandiflora (33.76 N·m/g) compared to control (32.10 N·m/g); the highest tear index with 5% HeOE of S. alba (4.11 mN·m2/g) compared to control (3.32 mN·m2/g); and the highest burst index with 5% HeOE of S. alba (4.11 kPa·m2/g) compared to control (3.08 kPa·m2/g). The highest double-fold number value (9) was observed with E. camaldulensis WB pulp treated with 5% HeOEs of S. alba, M. azedarach, and M. grandiflora but with no significant difference compared to control treatment (8.33) or other HeOE treatments with E. camaldulensis WB pulp. Scanning electron microscope (SEM) examination showed clear inhibition of the growth of Aspergillus terreus with WB pulp paper discs of E. camaldulensis and M. sinclairii treated with HeOEs of M. azedarach, S. alba, and M. grandiflora at 3% and 5% compared to control treatment, while HeOEs at 5% concentration showed no growth of A. niger and A. terreus. The present findings establish that the HeOEs from M. azedarach, S. alba, and M. grandiflora at 3% and 5% are novel natural products that can be used as alternatives to improve the properties and antifungal activity of WB pulp produced from E. camaldulensis and M. sinclairii.

Evaluation of the Mechanical, Physical, and Anti-Fungal Properties of Flax Laboratory Papersheets with the Nanoparticles Treatment.

In the present study, novel mixed additives of Chitosan or Paraloid B-72 combined with nanoparticles (NPs) of Ag, ZnO, or cellulose (NCL) were examined for their effects on the mechanical, optical, and fungal inhibition properties of the papersheets produced. The highest tensile, tear, and burst indices of the papersheets were observed for flax pulp treated with additives of Paraloid B-72 + ZnO NP (1%), Chitosan + ZnO NP (3%), and Chitosan + NCL (3%) at levels of 59.93 N·m/g, 18.45 mN·m2/g, and 6.47 kPa·m2/g, respectively. Chitosan + ZnO NP (1%) added to flax pulp showed the highest fungal mycelial inhibition (FMI) (1.85%) against Aspergillus flavus. Chitosan + Ag NP (1%) exhibited the highest FMI percentage (11.48%) when added to pulp against A. terreus. Pulp treated with Paraloid B-72 + Ag NP (1%) exhibited the highest activity against Stemphylium solani with an FMI value of 3.7%. The results indicate that the technological properties of the papersheets were enhanced with the addition of novel mixtures to the pulp.

3d-4f coupling and multiferroicity in frustrated Cairo Pentagonal oxide DyMn2O5.

In solid state science, multifunctional materials and especially multiferroics have attracted a great deal of attention, as they open the possibility for next generation spintronic and data storage devices. Interestingly, while many of them host coexisting 3d and 4f elements, the role of the coupling between these two magnetic entities has remained elusive. By means of single crystal neutron diffraction and inelastic neutron scattering experiments we shed light on this issue in the particular case of the multiferroic oxide DyMn2O5. This compound undergoes a first order magnetic transition from a high temperature incommensurate phase to a low temperature commensurate one. Our investigation reveals that although these two phases have very different magnetic structures, the spin excitations are quite similar indicating a fragile low temperature ground state with respect to the high temperature one. Such a rare scenario is argued to be a manifestation of the competition between the exchange interaction and 4f magnetic anisotropy present in the system. It is concluded that the magnetic structure, hence the ferroelectricity, can be finely tuned depending on the anisotropy of the rare earth.