Analyses of BER-referred noise-to-signal ratio in online measurements of high-baud-rate coherent receivers.

Digital coherent transmission features a very large transmission bandwidth and has played a main role in core optical transmission networks. With the progress of semiconductor technologies, practical coherent transceivers with rates over 100 Gbaud are becoming feasible. With such advances, the transceiver components must have lower power consumption and lower costs, and it becomes important to know how each component contributes to the overall transmission performance. Here, to decompose the effects of noise factors in high-baud-rate DP-16QAM transmissions, we used the theoretical relationship between the bit error rate (BER) and noise-to-signal ratio (NSR) and performed linear analyses. The NSR could be decomposed into individual noise contributions according to dependences on the inverse signal and local photocurrents. The obtained parameters were shown to be useful for predicting required optical signal-to-noise ratio (ROSNR) characteristics.

Ultra-compact coherent receiver with serial interface for pluggable transceiver.

An ultra-compact integrated coherent receiver with a volume of 1.3 cc using a quad-channel transimpedance amplifier (TIA)-IC chip with a serial peripheral interface (SPI) is demonstrated for the first time. The TIA with the SPI and photodiode (PD) bias circuits, a miniature dual polarization optical hybrid, an octal-PD and small optical coupling system enabled the realization of the compact receiver. Measured transmission performance with 32 Gbaud dual-polarization quadrature phase shift keying signal is equivalent to that of the conventional multi-source agreement-based integrated coherent receiver with dual channel TIA-ICs. By comparing the bit-error rate (BER) performance with that under continuous SPI access, we also confirmed that there is no BER degradation caused by SPI interface access. Such an ultra-compact receiver is promising for realizing a new generation of pluggable transceivers.

Fast optical channel recovery in field demonstration of 100-Gbit/s Ethernet over OTN using real-time DSP.

A field trial of 100-Gbit/s Ethernet over an optical transport network (OTN) is conducted using a real-time digital coherent signal processor. Error free operation with the Q-margin of 3.2 dB is confirmed at a 100 Gbit/s Ethernet analyzer by concatenating a low-density parity-check code with a OTN framer forward error correction, after 80-ch WDM transmission through 6 spans x 70 km of dispersion shifted fiber without inline-dispersion compensation. Also, the recovery time of 12 msec is observed in an optical route switching experiment, which is achieved through fast chromatic dispersion estimation functionality.