[Creation of 3D Stereo and MPR Color Anatomical Charts in the Hepatic Segments].

We used the Voronoi diagram of a computed tomography (CT) application (i.e., CT liver volume measurement) to depict the liver area, and we obtained depictions of the hepatic segments as a three-dimensional (3D) image based on clinical data; this information can be used for the patient's education and for surgical planning. The hepatic segments use the inter-relationships among the eight subsegments illustrated by Couinaud, those indicated by the portal veins and those provided by hepatic veins. The liver has dual portal and arterial innervation, with the thick portal vein intertwined with thin arteries similar to the intertwining of ivy plants. Couinaud divided the liver into eight segments (S1 to S8) based on portal vein casts. The Voronoi diagram estimates the dominant region of the portal vein, divides the liver into segments, and produces 3D images and multiplanar reconstruction (MPR) images in color. To support understanding of Couinaud's eight hepatic segments (which are explained only in the illustration of the frontal view of the liver), using 3D images created by the Voronoi diagram, we created 3D stereo color anatomical charts of the liver that Couinaud's eight hepatic segments can be confirmed from multiple directions. In addition, we created the MPR color anatomical charts of the liver (S1 to S8) that can be confirmed by color from three directions: axial images, coronal images, and sagittal images in the same way. We converted the data of this anatomical chart into an electronic file that provides a tool that can be easily used in radiological examinations, and we were able to make improvements based on requests from users.

Low-temperature selective oxidation of methane to methanol over a platinum oxide.

The low-temperature activation of methane is highly important as a reaction that can dissociate the strongest C-H bond and convert it into useful compounds. This study demonstrated that supported platinum oxide was found to activate methane near room temperature and selectively afford methanol in the presence of oxygen.

[Influence of the Imaging Method on Regional Cerebral Blood Flow Value in Arterial Spin Labeling (ASL): Comparison of Pulsed-ASL with Two-dimensional Acquisition and Pseudo-continuous-ASL with 3D Spiral Acquisition].

PURPOSE: The purposes of this study were to compare regional cerebral blood flow (rCBF) images acquired by the pulsed arterial spin labeling with two-dimensional acquisition (PASL-2D) and the pseudo-continuous-ASL with three-dimensional spiral acquisition (pCASL-3D spiral), and to clarify the characteristics of rCBF values in both ASL methods. METHODS: PASL-2D and pCASL-3D spiral were performed in five healthy volunteers with no history of brain disease using 3T scanners from two venders in the same center. 3D T1-weighted images and rCBF images were acquired by both ASL methods for a total of 3 sessions: twice at the initial visit (1st and 2nd), and 1 hour and 1 week later. The rCBF images calculated by each MR machine were anatomically standardized using SPM12. The regions of interest (ROIs) were set on the territory of the anterior cerebral artery (ACA), the middle cerebral artery (MCA), and the posterior cerebral artery (PCA). Mean and relative rCBF values were calculated at each arterial territory in each session. Reproducibility for rCBF value in each method was analyzed using Bland-Altman plots, the coefficient of repeatability (CR), and the repeatability index (RI). RESULTS: In all sessions, mean values of rCBF were the highest at PCA for PASL-2D and at MCA for pCASL-3D spiral. RIs of pCASL-3D spiral were lower than those of PASL-2D in all arterial territories. CONCLUSION: In the PASL-2D and the pCASL-3D spiral, we confirmed the characteristics of the mean and reproducibility of rCBF values in each arterial territory.

[Creation of a Stereo-paired Bone Anatomical Chart Using Human Bone Specimens for X-ray Anatomical Education Part III: Addition of Anaglyph Three-dimensional Images for Those Who Hardly See Stereo-paired Photographs with the Naked Eye].

We published a report entitled "Creation of a stereo-paired bone anatomical chart using human bone specimen for radiation education" in this journal in order to accurately understand the surface structure and three-dimensional structure of bones, and assist in bone image interpretation. However, some people cannot see stereoscopically with the naked eye. Therefore, we created anaglyph three-dimensional (3D) images from stereo-paired images of the stereo X-ray anatomical chart of the bone specimen. The anaglyph of the bone surface and X-ray images facilitates stereoscopic viewing with red-blue 3D glasses. The stereo X-ray anatomical chart of the bone specimen with anaglyph 3D images was converted into an electronic data file in the same manner as the stereo X-ray anatomical chart of the bone specimen, which can be easily used in any radiological examination rooms or at home through an electronic medium. We made it possible to perform correlative stereoscopic observations of the bone surface and X-ray images using red-blue 3D glasses.

[Creation of Bone X-ray Radiography Manual Using Human Bone Specimens for Bone X-ray Radiography Education].

Senior radiological technologists have made various improvements and have supported the clinical and educational fields by explaining bone X-ray radiography to students and junior radiological technologists to understand the procedure using illustrations, X-ray images, and photographs in a way that corresponds to the design software available for that era. Because human bone specimens are only available in the anatomy laboratory of medical schools, they could not be used for the explanation of bone X-ray radiography until now. Therefore, we have developed a bone X-ray radiography manual using bone specimens for the bone X-ray radiography education, which helps students to understand the procedure of bone X-ray radiography. Previous bone X-ray radiography manuals had not been illustrated by bone specimens and bone specimen X-ray images, but this bone X-ray radiography manual using bone specimens has made it possible to understand the surface morphology of bone specimens and X-ray images of them. In addition, the data of bone X-ray radiography using this bone specimen were made into an electronic file, which can be easily used at the place of radiological examination or at home through electronic media.

[Creation of Stereo-paired Color Vascular Anatomical Charts Using 3-dimentional Images].

Three-dimensional (3D) images of blood vessels in the human body, which are acquired by X-ray computed tomography (CT) and cone-beam CT of Angiography devices, are widely used in medical diagnosis and treatment. Using the 3DCT images of blood vessels, we created stereo-paired color vascular anatomical charts for better understanding of vascular anatomy in clinical settings, patient explanations, and student education. Since it is difficult to distinguish branches of blood vessels that show three-dimensionally complicated running such as cerebral blood vessels, we made it easier to identify them anatomically by color-coding each branch of the blood vessel. Also, by using stereo-paired images, we can see the three-dimensional blood vessel running. In the past anatomical books and vascular anatomy atlas, there was no anatomical chart of the whole body blood vessels that could be color-coded and stereoscopically viewed. We have made it possible to identify blood vessels by the stereoscopic vision of the blood vessels using this stereo-paired color anatomical chart. In addition, this vascular anatomical chart can be additionally revised according to the needs of the clinical and educational settings to be used, and the data can be converted into an electronic file so that it can be easily used in the field of radiological examination or at home through electronic media.

[Creation of a Stereo-paired Bone Anatomical Chart Using Human Bone Specimens for X-ray Anatomical Education Part II: Addition of Stereo-paired X-ray Bone Images to the Anatomical Chart].

In a previous issue of this journal, we published a report entitled "Creation of Stereo-paired Bone Anatomical Charts Using Human Bone Specimens for Radiation Education" To understand how the bone specimen is visualized as an X-ray image, we newly created a bone specimen stereo-paired X-ray anatomical chart by adding the X-ray images of the same bone specimen. When a bone is X-rayed, the surface structure and internal structure of the bone are visualized as a composite image of the difference in X-ray absorption, and each bone becomes a unique X-ray image. Therefore, we took stereo-paired X-ray images of the bone specimens by the same method as the stereo-paired anatomical chart of the bone specimens. Then, we arranged the stereo-paired X-ray images and surface images of the same bone specimen in the one sheet to be readily compared. Similar to the previous bone specimen anatomical charts, these data of X-ray image anatomical chart were also made into an electronic file, so that we can do the three-dimensional observation of bone X-ray images even at the place of radiological examination or at home through electronic media. Until now, none of the specialized anatomy books and pictorial books are available for stereoscopic viewing of bone specimens and bone X-ray images. However, this stereo-paired X-ray image anatomical chart enabled us to learn accurate three-dimensionalization of bones by comparing the bone surface morphology and bone X-ray images.

Efficacy of a Nonrigid Image-registration Method in Comparison to Readout-segmented Echo-planar Imaging for Correcting Distortion in Diffusion-weighted Imaging.

We evaluated the effectiveness of distortion correction using a nonrigid image registration method in diffusion-weighted imaging, comparing it with readout-segmented echo planar imaging (RS-EPI). Unlike the RS-EPI, the effectiveness of the distortion correction of the nonrigid registration method depended on the slice level, being most accurate at the level of the basal ganglia, lateral ventricle, and centrum semiovale.

[Creation of Stereo-paired Bone Anatomical Charts Using Human Bone Specimens for Radiation Education].

In radiological examinations of patients, we often take stacked images and three-dimensional (3D) images of human bone radiological images such as X-ray images and CT images. In general, learning of bone structure using specialized anatomy books is currently performed at medical radiological technologist education facilities. In the anatomy education of the medical school, in order to understand the structure of human and the individual bone shapes in detail, a real human bone specimen is used to gain knowledge of skeleton, bone shape, bone name and bone function. But it is actually difficult for a radiological technologist to obtain such learning opportunities. Therefore, we had to depend on two-dimensional information from an anatomical atlas so far. Therefore, as a method to solve this, we devised this stereo-paired bone anatomical chart by stereoscopic photography of a real human bone specimen that is available only in the anatomy laboratory. In classical anatomy textbooks, there are no figures that enable us to view 3D structures of human bones. Our stereo-paired bone anatomical charts make it possible to observe accurate bone structures three-dimensionally. In addition, we saved the data as a PDF file and uploaded to an internet server so that we can freely download and readily observe 3D images of human bones at all times and all places with a tablet or a PC monitor.

[Creation of Stereo Color Anatomical Charts Showing Nerve Fibers in the Cerebral Lobe and Gyrus of the Brain for Use in the MR Examination].

In anatomical charts in conventional books, the pathways of nerve fibers are drawn in illustrations. Conversely, with diffusion tensor tractography (DTT), we can visually understand the trajectory of nerve fibers through color. We created a stereo color anatomical chart of the nerve fibers that can be used for magnetic resonance (MR) examination to diagnose the pathway of nerve fibers and that can be used to explain the results of MR examination to visually understand how nerve fiber information is transmitted from the frontal lobe, parietal lobe, occipital lobe, temporal lobe, cerebellar lobe, and cerebral cortex.

[The Influence for Image Quality of Diffusion Weighted Image by Gradient Coil Systems].

The purpose of this study was to evaluate the influence for image quality of diffusion weighted image (DWI) by gradient coil systems (two single gradient systems and a dual gradient system). We obtained DWIs of a phantom and three volunteer brains, changing gradient coil systems and echo time (TE) from configurable shortest TE to 130 ms. Image quality of DWI was evaluated by signal to noise ratio (SNR), image distortion, susceptibility artifact, and visual evaluation. SNR of dual gradient system and configurable shortest TE was the highest in phantom study, but there was no difference for SNR of volunteer brain images by each gradient coil system in visual evaluation. Image distortion of single gradient system with low gradient amplitude was the worst in phantom study, and the score of visual evaluation in susceptibility artifact was significantly lower than other gradient coil systems. Dual gradient system was low influence to image distortion and susceptibility artifact. In conclusion, using dual gradient system and configurable shortest TE is recommended for less distortion, low susceptibility artifact, and high SNR image.

Genome-wide association study in Japanese females identifies fifteen novel skin-related trait associations.

Skin trait variation impacts quality-of-life, especially for females from the viewpoint of beauty. To investigate genetic variation related to these traits, we conducted a GWAS of various skin phenotypes in 11,311 Japanese women and identified associations for age-spots, freckles, double eyelids, straight/curly hair, eyebrow thickness, hairiness, and sweating. In silico annotation with RoadMap Epigenomics epigenetic state maps and colocalization analysis of GWAS and GTEx Project eQTL signals provided information about tissue specificity, candidate causal variants, and functional target genes. Novel signals for skin-spot traits neighboured AKAP1/MSI2 (rs17833789; P = 2.2 × 10-9), BNC2 (rs10810635; P = 2.1 × 10-22), HSPA12A (rs12259842; P = 7.1 × 10-11), PPARGC1B (rs251468; P = 1.3 × 10-21), and RAB11FIP2 (rs10444039; P = 5.6 × 10-21). HSPA12A SNPs were the only protein-coding gene eQTLs identified across skin-spot loci. Double edged eyelid analysis identified that a signal around EMX2 (rs12570134; P = 8.2 × 10-15) was also associated with expression of EMX2 and the antisense-RNA gene EMX2OS in brain putamen basal ganglia tissue. A known hair morphology signal in EDAR was associated with both eyebrow thickness (rs3827760; P = 1.7 × 10-9) and straight/curly hair (rs260643; P = 1.6 × 10-103). Excessive hairiness signals' top SNPs were also eQTLs for TBX15 (rs984225; P = 1.6 × 10-8), BCL2 (rs7226979; P = 7.3 × 10-11), and GCC2 and LIMS1 (rs6542772; P = 2.2 × 10-9). For excessive sweating, top variants in two signals in chr2:28.82-29.05 Mb (rs56089836; P = 1.7 × 10-11) were eQTLs for either PPP1CB or PLB1, while a top chr16:48.26-48.45 Mb locus SNP was a known ABCC11 missense variant (rs6500380; P = 6.8 × 10-10). In total, we identified twelve loci containing sixteen association signals, of which fifteen were novel. These findings will help dermatologic researchers better understand the genetic underpinnings of skin-related phenotypic variation in human populations.

Genome-wide association study of self-reported food reactions in Japanese identifies shrimp and peach specific loci in the HLA-DR/DQ gene region.

Food allergy is an increasingly important health problem in the world. Several genome-wide association studies (GWAS) focused on European ancestry samples have identified food allergy-specific loci in the HLA class II region. We conducted GWAS of self-reported reactivity with common foods using the data from 11011 Japanese women and identified shrimp and peach allergy-specific loci in the HLA-DR/DQ gene region tagged by rs74995702 (P = 6.30 × 10-17, OR = 1.91) and rs28359884 (P = 2.3 × 10-12, OR = 1.80), respectively. After HLA imputation using a Japanese population-specific reference, the most strongly associated haplotype was HLA-DRB1*04:05-HLA-DQB1*04:01 for shrimp allergy (P = 3.92 × 10-19, OR = 1.99) and HLA-DRB1*09:01-HLA-DQB1*03:03 for peach allergy (P = 1.15 × 10-7, OR = 1.68). Additionally, both allergies' associated variants were eQTLs for several HLA genes, with HLA-DQA2 the single eQTL gene shared between the two traits. Our study suggests that allergy to certain foods may be related to genetic differences that tag both HLA alleles having particular epitope binding specificities as well as variants modulating expression of particular HLA genes. Investigating this further could increase our understanding of food allergy aetiology and potentially lead to better therapeutic strategies for allergen immunotherapies.