RESUMO
This investigation elucidates the electrochemical reaction process occurring within lithium-sulfur battery cells in detail, which has been unclear even after a half century of study primarily due to the very high reactivity of the polysulfide species. The polysulfide intermediates were deactivated by organic conversion - benzylization, and LC/MS and NMR analyses were first applied. The results demonstrate that the second voltage plateau in the discharge profile, which is the most important step in practical use because of its constant voltage, is dominated by the reduction of the Li2S3 intermediate. The first voltage plateau and the transition state between the plateaus, in which the voltage varies with the capacity, are associated with multiple reactions including the decomposition of S8 into Li2Sx (x = 1 to 7) and the transformation of Li2Sy (y = 4 to 8) into Li2Sz (z = 1 to 3). It is also revealed that longer polysulfide species, Li2Si (i = 6 to 8), are responsible for the redox shuttle phenomenon, which causes serious capacity degradation.
RESUMO
We report the application of tapping-mode scanning probe electrospray ionization (t-SPESI) to mass spectrometry imaging of industrial materials. The t-SPESI parameters including tapping solvent composition, solvent flow rate, number of tapping at each spot, and step-size were optimized using a quadrupole mass spectrometer to improve mass spectrometry (MS) imaging of thin-layer chromatography (TLC) and additives in polymer films. Spatial resolution of approximately 100 µm was achieved by t-SPESI imaging mass spectrometry using a fused-silica capillary (50 µm i.d., 150 µm o.d.) with the flow rate set at 0.2 µL/min. This allowed us to obtain discriminable MS imaging profiles of three dyes separated by TLC and the additive stripe pattern of a PMMA model film depleted by UV irradiation.
