Conversion of THz refractive index variation to detectable voltage change realized by a graphene-based Brewster angle device.

The Brewster effect has been previously reported as an essential mechanism for terahertz (THz) wave sensing application. However, generally in a sensing application, a complex rotation apparatus is required for detecting the slight change in Brewster angle. Here, we propose a graphene-based Brewster angle device operating at a specific terahertz frequency capable of sensing the refractive index at a fixed incident angle. In other words, our sensing device could avoid the impact of Brewster angle shift and eliminate the need for high-precision rotating equipment, which is usually required in traditional sensing applications. The conversion from the refractive index to a Volt-level detectable voltage roots from the tunability of graphene's Fermi level in the external electrical field. A linear correlation between the output voltage and the background refractive index is observed and theocratically analyzed. Furthermore, we present the improvement of our device in terms of sensing range and sensitivity by adjusting the permittivity of the dielectric substrate. As a demonstration of our proposed device, a detection range of 1.1-2.4 and a sensitivity of 20.06 V/RIU for refractive index is achieved on a high-resistance silicon substrate operating at 0.3 THz.

Conductance of o-carborane-based wires with different substitution patterns.

Here, we report the synthesis, structure, and single-molecule conductance of three o-carborane-based molecular wires (ortho-, meta- and para-CN) with multiple conduction channels. The effect of connectivity in target wires compared with the corresponding phenyl-centered wires was studied using the scanning tunneling microscope break junction (STM-BJ) technique and theoretical calculations. Interestingly, the three-dimensional structure in o-carborane-based wires can effectively promote the through-space transmission paths or the formation of stable molecular junctions compared to the corresponding phenyl-centered wires. Moreover, the significant conductance difference of o-carborane-based wires was due to the combination of multiple conduction channels and quantum interference. Understanding the effects of different bridging groups and anchor group substitution patterns provides guidelines for designing o-carborane-based multichannel molecular wires.

Cardiac contractility modulation and subcutaneous defibrillator (S-ICD): First experience with simultaneous implantation.

BACKGROUNDS: Two technologies, cardiac contractility modulation (CCM) and subcutaneous implantable cardioverter-defibrillator (S-ICD), can be successfully combined and applied to patients with advanced heart failure (HF) with reduced left ventricular ejection fraction (LVEF). CASE REPORT: We reported a case of a 51-year-old man with reduced ejection fraction (LVEF = 33%) and a narrow QRS complex who first underwent simultaneous implantation of CCM and S-ICD. CONCLUSION: Our case report aimed to reveal that the simultaneous implantation of CCM and S-ICD could be successfully used in patients with advanced HF, which could significantly improve the clinical symptoms of such patients during one surgery.

Chemometrics applied quantitative analysis of iron oxide mixtures by terahertz spectroscopy.

A quantitative analysis method for corrosion products based on terahertz spectroscopy is proposed in this paper. Mixture samples consisting of three major corrosion products (magnetite, hematite, and goethite) were prepared in 51 different concentrations. The refractive index spectra measured by terahertz time-domain spectroscopy were projected to the 2D score diagram by performing principal component analysis. The Euclidean distances between the mixtures and pure analyte on the diagram were used to build a concentration prediction model. The results indicate that the established model can precisely predict the concentration of magnetite, which is essential for a stability evaluation of the corrosion system.

CT-based radiomics to predict development of macrovascular invasion in hepatocellular carcinoma: A multicenter study.

BACKGROUND: Macrovascular invasion (MaVI) occurs in nearly half of hepatocellular carcinoma (HCC) patients at diagnosis or during follow-up, which causes severe disease deterioration, and limits the possibility of surgical approaches. This study aimed to investigate whether computed tomography (CT)-based radiomics analysis could help predict development of MaVI in HCC. METHODS: A cohort of 226 patients diagnosed with HCC was enrolled from 5 hospitals with complete MaVI and prognosis follow-ups. CT-based radiomics signature was built via multi-strategy machine learning methods. Afterwards, MaVI-related clinical factors and radiomics signature were integrated to construct the final prediction model (CRIM, clinical-radiomics integrated model) via random forest modeling. Cox-regression analysis was used to select independent risk factors to predict the time of MaVI development. Kaplan-Meier analysis was conducted to stratify patients according to the time of MaVI development, progression-free survival (PFS), and overall survival (OS) based on the selected risk factors. RESULTS: The radiomics signature showed significant improvement for MaVI prediction compared with conventional clinical/radiological predictors (P < 0.001). CRIM could predict MaVI with satisfactory areas under the curve (AUC) of 0.986 and 0.979 in the training (n = 154) and external validation (n = 72) datasets, respectively. CRIM presented with excellent generalization with AUC of 0.956, 1.000, and 1.000 in each external cohort that accepted disparate CT scanning protocol/manufactory. Peel9_fos_InterquartileRange [hazard ratio (HR) = 1.98; P < 0.001] was selected as the independent risk factor. The cox-regression model successfully stratified patients into the high-risk and low-risk groups regarding the time of MaVI development (P < 0.001), PFS (P < 0.001) and OS (P = 0.002). CONCLUSIONS: The CT-based quantitative radiomics analysis could enable high accuracy prediction of subsequent MaVI development in HCC with prognostic implications.

Ferrocene-Alkynyl Conjugated Molecular Wires: Synthesis, Characterization, and Conductance Properties.

A novel series of 1,2,3-substituted ferrocene-based wires a1-a2 and b4-b5 have been synthesized by using an iterative Pd-mediated Sonogashira cross-coupling methodology. The molecular structures of a2 and b3 were determined by single-crystal X-ray analysis. Electrochemical data showed that there was a strong electronic communication among the ferrocenyl moieties in b1-b5. The UV absorption spectra indicated that replacing the 1,1'-substituted ferrocene unit with a 1,2,3-substituted ferrocene moiety causes delocalization of electrons in the extended π orbitals. The self-assembled monolayers of wire a1 and a2 on Au surfaces have been comprehensively characterized by electrochemistry and scanning tunneling microscopy break junction. The data demonstrated that 1,2,3-substituted ferrocene-based wires reduced the intermolecular π-π stacking, and furthermore solved the rotation problem in the 1,1'-substituted ferrocene-based wires.

Ferrocenylethynyl-terminated azobenzenes: synthesis, electrochemical, and photoisomerization studies.

Ferrocenylethynyl-terminated derivatives 8-12 have been synthesized and characterized by electrochemistry and UV/Vis spectroscopy. The electrochemical and photophysical studies indicate that the electronic communication in ferrocenylethynyl-substituted derivatives is strongly influenced by the substituted position of the ferrocenylethynyl moiety. In situ electrochemical oxidation or chemical oxidation caused a characteristically weak ligand-to-metal charge-transfer (LMCT) band to appear at 700-1000 nm. Subsequent electrochemical reduction or chemical reduction recovered the most of the original curve and the color of the solution as well. Among the derivatives, compound 8 exhibits the highest cis/trans molar ratio (64:36) in the photostationary state (PSS) upon light irradiation at 365 nm. Compound 8 exhibits excellent fatigue resistance and reversibility under several repeated reversible isomerization cycles.

Ruthenium(II) bis(terpyridine) electron transfer complexes with alkynyl-ferrocenyl bridges: synthesis, structures, and electrochemical and spectroscopic studies.

Two novel alkynyl-bridged symmetric bis-tridentate ligands 1,2-bis(1'-[4'-(2,2':6',2''-terpyridinyl)]ferrocenyl)ethyne (3a; tpy-Fc-C[triple bond]C-Fc-tpy; Fc = ferrocenyl; tpy = terpyridyl) and 1,4-bis(1'-[4'-(2,2':6',2''-terpyridinyl)]ferrocenyl)-1,3-butadiyne (3b; tpy-Fc-C[triple bond]C-C[triple bond]C-Fc-tpy) and their Ru(2+) complexes 6a and 6b have been synthesized and characterized by cyclic voltammetry, UV-vis and luminescence spectroscopy, and in the case of 3b by single-crystal X-ray diffraction. Cyclic voltammograms of both compounds, 3a and 3b, display two severely overlapping ferrocene-based oxidative peaks with only one reductive peak. The redox behavior of 6a and 6b is dominated by the Ru(2+)/Ru(3+) redox couple (E(1/2) from 1.33 to 1.34 V), the Fe(2+)/Fe(3+) redox couples (E(1/2) from 0.46 to 0.80 V), and the tpy/tpy(-)/tpy(2-) redox couples (E(1/2) from -1.19 to -1.48 V). The UV-vis spectra of 6a and 6b show absorption bands assigned to the (1)[(d(π)(Fe))(6)] → (1)[(d(π)(Fe))(5)(π*(tpy)(Ru))(1)] MMLCT transition at ~555 nm. Complexes and are luminescent in H(2)O-CH(3)CN (4 : 1, v/v) solution at room temperature, and 6b exhibits the strongest luminescence intensity (λ(max)(em): 710 nm, Φ(em): 2.28 × 10(-4), τ: 358 ns) relative to analogous ferrocene-based bis(terpyridine) Ru(II) complexes reported so far.

[Research of Hg2+ sol-gel membrane made of organically modified silicates].

A photochemical sensor for the determination of Hg2+ consisting of organically modified silicates (ormosils) was developed. Hg(2+)-sensitive fluorescent sol-gel films were prepared by co-condensation of tetramethoxysilane (TMOS) and dimethyldimethoxysilane (DMOS), and the fluorescent indicator 5,10,15, 20-tetra (p-sulfonatophenyl) porphyrin sodium was embedded in sol-gel in the form of ion pairs with cetyltrimethyl ammonium bromide. The optimization condition of preparation and response performance of sol-gel membrane were investigated. The experimental results showed a linear range of Hg2+ concentrations from 1.0 x 10(-5) to 1.0 x 10(-4) mol x L(-1) in a Tris-HCl buffer at pH 8.0 with fast response and good repetition. The indicators in the sol-gel membrane did not leak out and the sensor showed good selectivity over other metal ions.