RESUMO
Fibers crystallize and become brittle at high temperatures for a long time, so the surface coating must maintain long-lasting emission performance, which requires superior antioxidant properties of the high-emissivity fillers. To improve the radiation performance of the coating and the tensile strength of the fiber fabric, a double-layer coating with high emissivity was prepared on the surface of flexible aluminum silicate fiber fabric (ASFF) using MoSi2 and SiC as emissive agents. The incorporation of borosilicate glass into the outer coating during high-temperature oxidation of ZrB2 results in superior encapsulation of emitter particles, effectively filling the pores of the coating and significantly reducing the oxidation rate of MoSi2 and SiC. Furthermore, the addition of an intermediate ZrO2 layer enhances the fiber bundle's toughness. The obtained double-coated ASFF exhibits an exceptionally high tensile strength of 57.6 MPa and a high bond strength of 156.2 kPa. After being subjected to a 3 h heating process, the emissivity exhibits a minimal decrease of only 0.032, while still maintaining a high value above 0.9. The thermal insulation composites, consisting of a flexible ASFF matrix and a ZrB2-modified double-layer coating, exhibit significant potential for broad applications in the field of thermal protection.
RESUMO
Mullite fiber felt is a promising material that may fulfill the demands of advanced flexible external thermal insulation blankets. However, research on the fabrication and performance of mullite fiber felt with high-temperature resistance and thermal stability is still lacking. In this work, mullite fibers were selected as raw materials for the fabrication of mullite fibrous porous materials with a three-dimensional net structure. Said materials' high-temperature resistance and thermal stability were investigated by assessing the effects of various heat treatment temperatures (1100 °C, 1300 °C, and 1500 °C) on the phase composition, microstructure, and performance of their products. When the heat treatment temperature was below 1300 °C, both the phase compositions and microstructures of products exhibited stability. The compressive rebound rate of the product before and after 1100 °C reached 92.9% and 84.5%, respectively. The backside temperature of the as-prepared products was 361.6 °C when tested at 1500 °C for 4000 s. The as-prepared mullite fibrous porous materials demonstrated excellent high-temperature resistance, thermal stability, thermal insulation performance, and compressive rebound capacity, thereby indicating the great potential of the as-prepared mullite fibrous porous materials in the form of mullite fiber felt within advanced flexible external thermal insulation blankets.
RESUMO
Ceramic fiber thread is one of the key components in flexible external thermal insulation blankets, and it has been applied in various fields as a flexible ceramic fibrous material with excellent deformability and high-temperature resistance. However, ceramic fiber threads are often subjected to reciprocating friction motion at specific bending angles, making them highly susceptible to abrade and fracture. Enhancing the abrasion resistance performance of ceramic fiber threads under bending conditions is the future trend and remains a significant challenge. Hence, we design and construct a novel polyurethane-modified coating on the ceramic fiber threads to improve their abrasion resistance performance. The effects of the types and concentrations of modifiers on the microstructure, abrasion resistance property, and tensile property of ceramic fiber threads are systematically investigated. The ceramic fiber threads, after modification with hexamethylene diisocyanate waterborne polyurethane (HDI-WPU) with a concentration of 3%, exhibit excellent abrasion resistance properties. The number of friction cycles at fracture of the modified ceramic fiber thread is more than three times, and the tensile strength is more than one and a half times, that of the original ceramic fiber thread, demonstrating the great potential of the HDI-WPU modifier for enhancing the abrasion resistance performance of ceramic fiber threads.
RESUMO
It is important to determine the relationship between the concentration of chlorophyll a (Chla) and the inherent optical properties (IOPs) of ocean water to develop optical models and algorithms that characterize the biogeochemical properties and estimate biological pumping and carbon flux in this environment. However, previous studies reported relatively large variations in the particulate backscattering coefficient (bbp(λ)) and Chla from more eutrophic high-latitude waters to clear oligotrophic waters, especially in oligotrophic oceanic areas where these two variables have little covariation. In this study, we examined the variability of bbp(λ) and Chla in the euphotic layer in oligotrophic areas of the tropical Western Pacific Ocean and determined the sources of these variations by reassessment of in-situ measurements and the biogeochemical-argo (BGC-Argo) database. Our findings identified covariation of bbp(λ) and Chla in the water column below the deep Chla maximum (DCM) layer, and indicated that there was no significant correlation relationship between bbp(λ) and Chla in the upper layer of the DCM. Particles smaller than 3.2 µm that were in the water column above the DCM layer had a large effect on the bbp(λ) in the vertical profile, but particles larger than 3.2 µm and smaller than 10 µm had the largest effect on the bbp(λ) in the water column below the DCM layer. The contribution of non-algal particles (NAPs) to backscattering is up to 50%, which occurs in the water depth of 50 m and not consistent with the distribution of Chla. Phytoplankton and NAPs were modeled as coated spheres and homogeneous spherical particles to simulate the bbp(λ) of the vertical profile by Aden-Kerker method and Mie theory, and the results also indicated that the backscattering caused by particles less than 20 µm were closer to the measured data when they were below and above the DCM layer, respectively. This relationship also reflects the bbp(λ) of particles in the upper water was significantly affected particle size, but bbp(λ) in the lower water was significantly affected by Chla concentration. This effect may have relationship with phytoplankton photoacclimation and the relationship of a phytoplankton biomass maximum with particle size distribution in the water column according to the previous relevant studies. These characteristics also had spatial and seasonal variations due to changes of Chla concentration at the surface and at different depths. There was mostly a linear relationship between Chla and bbp(700) during winter. During other seasons, the relationship between these two variables was better characterized by a power function (or a logarithmic function) in the lower layer of the DCM. The spatial and vertical relationships between the bbp(λ) and Chla and the corresponding variations in the types of particles described in this study provide parameters that can be used for accurate estimation of regional geochemical processes.
Assuntos
Clorofila , Água , Clorofila A , Oceano Pacífico , Oceanos e Mares , Biomassa , Fitoplâncton/químicaRESUMO
Introduction: Responsive drug delivery systems hold great promise for tumor treatment as they focus on therapeutic agents directly, thus minimizing systemic toxicities and drug leakage. In this study, we covalently bound a matrix metalloproteinases-2 (MMP-2) enzyme-sensitive peptide to a tissue-penetrating peptide to rationally design a MMP-2 responsive multifunctional peptide hydrogel platform (aP/IR@FMKB) for cancer photothermal-chemo-immunotherapy. The constructed aP/IR@FMKB with bufalin (BF) loaded in trimethyl chitosan nanoparticles (TB NPs), photothermal agent IR820, and immune checkpoint inhibitor aPD-L1 by self-assembly could be dissociated in the presence of MMP-2 enzyme, triggering content release. Methods: TB NPs, IR820, and aPD-L1 were encapsulated by intermolecular self-assembly and enzyme-sensitive nanogels (aP/IR@FMKB) were constructed. The in vitro cytotoxicity of the blank gels and their ability to induce immunogenic cell death (ICD) in aP/IR@FMKB were evaluated using 4T1 cells. The promotion of deep tumor penetration and enzyme responsiveness was analyzed using a 3D cell model. The retention and antitumor activity at the tumor sites were examined using the primary tumor model. To assess the antitumor effect of aP/IR@FMKB induced by the immune response and its mechanism of action, recurrent tumor and distal tumor models were constructed. Results: This hydrogel system demonstrated exceptional photothermal performance and displayed prolonged local retention. Furthermore, the induction of ICD through IR820 and TB NPs sensitized the PD-L1 blockade, resulting in a remarkable 3.5-fold and 5.2-fold increase in the frequency of intratumor-infiltrating CD8+ T-cells in the primary tumor and distal tumor, respectively. Additionally, this system demonstrated remarkable efficacy in suppressing primary, distal, and recurrent tumors, underscoring its potential as a highly potent therapeutic strategy. Conclusion: This innovative design of the responsive hydrogel can effectively modulate the tumor immune microenvironment while also demonstrating sensitivity to the PD-1/PD-L1 blockade. This significant finding highlights the promising potential of this hydrogel in the field of multimodal tumor therapy.
Assuntos
Hidrogéis , Neoplasias , Humanos , Antígeno B7-H1 , Metaloproteinase 2 da Matriz , Linfócitos T CD8-Positivos , Endopeptidases , Neoplasias/tratamento farmacológico , Inibidores de Checkpoint Imunológico , Microambiente TumoralRESUMO
High-entropy ceramics exhibit various excellent properties owing to their high configurational entropy, which is caused by multi-principal elements sharing one lattice site. The configurational entropy will further increase significantly if multi-principal elements randomly share two different lattice sites. For this purpose, pseudobrookite phase containing two cationic lattice sites (A and B sites) is selected, and corresponding high-entropy pseudobrookite (M2+ 0.4M3+ 1.2)Ti1.4O5 is synthesized. Herein, the distribution of the 2-valent and 3-valent cations in the A and B sites are analysed in depth. The distance between the A and B sites in the crystal structure models which are constructed by the Rietveld analysis is calculated and defined as distance d. Meanwhile, the atomic column positions in the STEM images are quantified by a model-based mathematical algorithm, and the corresponding distance d are calculated. By comparing the distance d, it is determine that the 2-valent and 3-valent cations are jointly and disorderly distributed in the A and B sites in high-entropy (M2+ 0.4M3+ 1.2)Ti1.4O5. The density functional theory (DFT) simulations also demonstrate that this type of crystal structure is more thermodynamically stable. The higher degree of cationic disorder leads to a higher configurational entropy in high-entropy (M2+ 0.4M3+ 1.2)Ti1.4O5, and endows high-entropy (M2+ 0.4M3+ 1.2)Ti1.4O5 with very low thermal conductivity (1.187-1.249 W m-1 K-1).
RESUMO
Porous fiber-based ceramics have been widely applied in various fields because of their excellent thermal insulation property and high thermal stability property. However, designing porous fibrous ceramics with enhanced comprehensive performances, such as low density, low thermal conductivity, and high mechanical properties at both room temperature and high temperature, is still a challenge and the future development trend. Hence, based on the lightweight cuttlefish bone that possesses a "wall-septa" structure with excellent mechanical performance, we design and fabricate a novel porous fibrous ceramic with the unique fiber-based dual structure of lamellas by the directional freeze-casting method and systematically investigate the effects of lamellar components on the microstructure and mechanical performances of the product. For the desired cuttlefish-bone-structure-like lamellar porous fiber-based ceramics (CLPFCs), the porous framework formed by the overlapping of transversely arranged fibers helps to reduce the density and thermal conductivity of the product, and the longitudinally arranged lamellar structure replaces traditional binders and plays an important role in improving the mechanical properties in the direction parallel to the X-Z plane. Compared with traditional porous fibrous materials reported in the literature, the CLPFCs with an Al2O3/SiO2 molar ratio of 1:2 in the lamellar component exhibits prominent comprehensive performances, such as low density, excellent thermal insulation property, and outstanding mechanical performances at both room temperature and high temperature (3.46 MPa at 1300 °C), indicating that the CLPFCs are a promising candidate for applications in high-temperature thermal insulation systems.
RESUMO
Fibrous porous materials are one of the most commonly used high-temperature insulation materials because of their high porosity and low thermal conductivity. Due to their wide applications in the aerospace and energy industries, the investigation of high-elastic thermally insulating porous materials has attracted increasing attention. In order to improve the elasticity of fibrous porous materials, quartz fibers with high aspect ratio were used as matrix, sodium hexametaphosphate (SHMP) was selected as dispersant. We innovatively reported that a unique three-dimensional skeleton structure was constructed by adjusting the dispersion of fibers in the slurry, and the lightweight, thermal insulating and elastic SiO2 fibrous porous material was then prepared by the compression molding method. The characterization results of zeta potential and absorbance showed that the addition of SHMP was an effective method to enhance the dispersibility of quartz fibers in the slurry. SiO2 fibrous porous materials with 0.4 wt% SHMP content exhibited an ideal three-dimensional skeleton structure, which endowed the porous material with high porosity (89.39%), low density (0.04751 g/cm3), and low thermal conductivity (0.0356 W·m-1·K-1). The three-dimensional skeleton structure formed by overlapping fibers with high aspect ratios endowed the porous material with excellent elasticity. SiO2 fibrous porous materials with 0.4 wt% SHMP content could undergo large strains of 30% and achieved a resilience ratio of 81.69% under the 30th compression cycle. Moreover, after heat treatment at 800 °C, SiO2 fibrous porous materials also maintained good elasticity with a resilience ratio of more than 80%.
RESUMO
Islands are one of the most sensitive interfaces between global changes and land and sea dynamic effects, with high sensitivity and low stability. Therefore, under the dynamic coupling effect of human activities and frequent natural disasters, the vulnerability of the ecological environment of islands shows the characteristics of complexity and diversity. For the protection of island ecosystems, a system for the assessment of island ecosystems and studies on the mechanism of island ecological vulnerability are highly crucial. In this study, the North and South Changshan Islands of China were selected as the study area. Considering various impact factors of island ecological vulnerability, the geographical information systems (GIS) spatial analysis, field surveys, data sampling were used to evaluate island ecological vulnerability. The Bayesian network model was used to explore the impact mechanism of ecological vulnerability. The results showed that the ecological vulnerability of the North Changshan Island is higher than that of the South Changshan Island. Among all the indicators, the proportion of net primary productivity (NPP) and the steep slope has the strongest correlation with ecological vulnerability. This study can be used as references in the relevant departments to formulate management policies and promote the sustainable development of islands and their surrounding waters.
Assuntos
Ecossistema , Atividades Humanas , Teorema de Bayes , China , Humanos , IlhasRESUMO
Fermented dairy products have been recognized as the best carriers for the administration of probiotics. Because one of the potential probiotic strains, Lactobacillus plantarum, has poor proteolytic ability and weak acidifying capacity in milk fermentation, the aim of this study was to preliminarily investigate the stimulation effect of plant-based meals on L. plantarum CCFM8661 growth in milk, and subsequently develop a yogurt or yogurt drinks containing probiotic strain L. plantarum CCFM8661. Milk supplemented with different concentrations (5 to 10%, wt/wt) of oat extract and malt extract, inoculated with 2.5 × 107 cfu/mL of L. plantarum CCFM8661, and then incubated at 35°C. The pH value, titration acidity, and viable cell counts during 48-h fermentation at 35°C and 25-d storage at 4°C, were determined at different intervals. The results showed that the promotion effects of oat extract and malt extract on L. plantarum CCFM8661 growth rate in milk were much stronger than almond, walnut, sweet corn, peanut, and soybean meals. In addition, the stimulation effect of oat extract was associated with its concentration, and was much stronger than that of malt extract. Furthermore, viable counts and titration acidity of yogurt were gradually increased in the oat extract group, whereas viable counts were gradually decreased and titration acidity were slightly increased in the malt extract group during the 25-d storage at 4°C.
Assuntos
Lactobacillus plantarum/crescimento & desenvolvimento , Leite/microbiologia , Extratos Vegetais/farmacologia , Animais , Avena , Produtos Fermentados do Leite/microbiologia , Fermentação , Hordeum , Concentração de Íons de Hidrogênio , Lactobacillus plantarum/efeitos dos fármacos , Lactobacillus plantarum/metabolismo , Probióticos , IogurteRESUMO
Water resources are indispensable resources for human survival. Researchers have used different methods to evaluate regional water security situations to ensure sustainable development. However, existing water security assessment models focus on the current status of water security in a static state and do not introduce flow characteristics of water resources into regional water security assessments. On the other hand, the quality of water resources should be reflected in not only current water security situations but also change trends of water security. Therefore, this paper attempts to integrate ecosystem service flows into a water security simulation using a simplified service path attribution networks (SPANs) model. Simultaneously, by simulating future scenarios and comparing future and current water security statuses, this paper systematically evaluates regional water security status and provides water security management and control suggestions that meet the requirements of regional development. The results show that water security in Henan Province and Shandong Province is lacking, and water resource management and control measures need to be strengthened to improve the water security in these areas. The water security assessment framework established in this paper not only reasonably assesses the status of water security but also provides a development model that meets the needs of the study area through a multiple scenario analysis. This study provides a scientific basis for government departments to formulate water management policies.
RESUMO
Economic development and the increased human demand for natural resources have seriously damaged many ecosystems. Nature reserves are areas with good natural conditions, abundant natural resources and healthy ecosystems that have been established for protection and management. This paper introduces cultural ecosystem services into the selection criteria for priority conservation areas. Both natural and human factors are considered, making it possible to protect both ecological and cultural services in reserves. In this paper, (1) the cultural ecosystem services of the Guanzhong-Tianshui Economic Region were estimated and quantified using questionnaires and the SolVES application; (2) the supplying services (water yield) and regulating services (net primary productivity (NPP), soil conservation) were calculated, and several ecosystem services were valued by models combining human and cultural data; and (3) multiple scenarios were considered, and a priority conservation area with NPP, soil conservation, water yield, aesthetic value and recreation protection efficiencies of 1.315, 2.458, 1.018, 1.414, and 1.079, respectively was selected by comparing the protection efficiencies of the different areas in each scenario to achieve the highest value for the various ecosystem services in the study area. The results provide decision support for the environmental protection of the Guanzhong-Tianshui Economic Region.
Assuntos
Conservação dos Recursos Naturais/métodos , Ecossistema , Valores Sociais , ChinaRESUMO
Uniform and dense carbon nanotubes (CNTs) were grown on the surface of the graphite film (GF) by a plasma-enhanced chemical vapor deposition process. The synthesized CNTs can act as a bridge between GF and Al matrix to enhance the interface performance and improve thermal properties of the GF/Al laminated composite simultaneously. A layer-by-layer CNTs-GF/Al composite with both increased mechanical property and thermal management capability was fabricated through an optimized pressure infiltration process, which was time- and energy-saving. The results show that the interface of the laminated composite is well bonded and no interface product such as Al4C3 is generated. Additional investigations reveal that the growth of CNTs is an effective way to improve the thermal conductivity and reduce the coefficient of thermal expansion of the GF reinforced Al composites. Overall, the best-performing CNTs-GF/Al composites with a CNTs-GF volume fraction of 51.42% show an increase of 47.99% in thermal conductivity and 26.44% in interlaminar shear strength, making them promising thermal management laminated materials.
RESUMO
Carbon fiber (CF)-reinforced ceramic composites show the attractive potential for next generation thermal protection materials because of their outstanding reliability and excellent high-temperature resistance but are facing great challenges in the combination of the engineering practicality and versatility. Herein, it is demonstrated that silicon carbide nanowires can be grown on the surface of CF to create a multifunctional thermal barrier application composite. The embedding of the silicon carbide nanowires in the interface of CF and ceramic matrix significantly increased the structural health monitoring sensitivity and interface strength of the composites. Compared to the conventional CF/ZrC composites, the structural health monitoring sensitivity of the composites with SiC nanowires is greatly elevated with a 14-fold improvement. Additional investigations revealed that the multifunctional SiCnws-CF/ZrC nanocomposites enjoyed a low thermal conductivity of 0.49 W/(m·K), a light weight (0.76-1.85 g/cm3), and a relative high compressive strength of 23.64 MPa, which is favorite in applying as a thermal barrier material. Furthermore, the interface design strategy could be extended as a universal method in fabricating various fiber-reinforced composites for a wide range of other applications.
RESUMO
Evidence of water reflectance saturation in extremely turbid media is highlighted based on both field measurements and satellite data corrected for atmospheric effects. This saturation is obvious in visible spectral bands, i.e., in the blue, green and even red spectral regions when the concentration of suspended particulate matter (SPM) reaches then exceeds 100 to 1000 g.m-3. The validity of several bio-optical semi-analytical models is assessed in the case of highly turbid waters, based on comparisons with outputs of the Hydrolight radiative transfer model. The most suitable models allow to reproduce the observed saturation and, by inversion, to retrieve information on the SPM mass-specific inherent optical properties.
RESUMO
Carbon nanofibers (CNFs) were grown around the carbon fiber architecture through a plasma enhanced chemical vapor deposition method to enhance the interface performance between CF architecture substrate and ZrC preceramic matrix. The synthesized 3D CF hierarchical architectures (CNFs-CF) are coated with zirconium carbide (ZrC) ceramic to enhance their antioxidant property and high temperature resistance. The composition and the crystalline phase structure of the composite were detected with the X-ray photoelectron spectroscopy and X-ray diffraction. The results of scanning electron microscopy show that, the as-prepared CNFs and consistent ZrC ceramic coating are uniformly covered on the surface of carbon fiber architecture substrate. The ZrC ceramic products with excellent crystallinity were got from the pyrolysis of preceramic polymer at 1600 °C in inert atmosphere. Comparing with the untreated CF, the loading of ZrC ceramics around the CNFs-CF architecture surface are significantly increased. The thermal stability and mechanical property of CNFs-CF/ZrC nanocomposites have been promoted obviously compared with the CF/ZrC ceramic nanocomposite. The prepared CNFs-CF/ZrC ceramic nanocomposite is one of the potential candidate materials for the thermal protection application.
RESUMO
Large-scale core-sheath heterostructural SiC nanowires were facilely grown on the surface of carbon fibers using a one-step chemical vapor infiltration process. The as-synthesized SiC nanowires consist of single crystalline SiC cores with a diameter of â¼30 nm and polycrystalline SiC sheaths with an average thickness of â¼60 nm. The formation mechanisms of core-sheath heterostructural SiC nanowires (SiCnws) were discussed in detail. The SiCnws-CF shows strong electromagnetic (EM) wave absorption performance with a maximum reflection loss value of -45.98 dB at 4.4 GHz. Moreover, being coated with conductive polymer polypyrrole (PPy) by a simple chemical polymerization method, the SiCnws-CF/PPy nanocomposites exhibited superior EM absorption abilities with maximum RL value of -50.19 dB at 14.2 GHz and the effective bandwidth of 6.2 GHz. The SiCnws-CF/PPy nanocomposites in this study are very promising as absorber materials with strong electromagnetic wave absorption performance.
RESUMO
An intracellular cascade amplification strategy for ultrasensitive "off-on" imaging of telomerase activity in living cells was designed. The method was based on fabrication of a dual function module-encapsulated liposome nanoprobe, which consisted of a telomerase-targeting responder-transmitter DNA complex (HPT) module and a catalyzed hairpin assembly (CHA) signal amplification module. Upon transfected into living cells, the released HPT could be specifically recognized and extended by telomerase, leading to the release of the transmitter DNA. The transmitter could act as the initiator and catalyzer of CHA amplification, resulting in the lightening up of the reporter complex. The telomerase activity could be monitored in situ by the fluorescence signal without the need for obtaining cell extracts. Because of the recycling use of the transmitter, multiplied enhancement of signal outputs from one extension event was achieved. The proposed strategy could be employed for in situ monitoring of the change of intracellular telomerase activity in response to drugs to detect drug efficacy. Thus the method has great potential in the study of the molecular mechanisms of telomerase-related life processes.
Assuntos
Sondas de DNA/metabolismo , Hibridização in Situ Fluorescente/métodos , Imagem Molecular/métodos , Técnicas de Amplificação de Ácido Nucleico/métodos , Telomerase/análise , Telomerase/metabolismo , Sondas de DNA/genética , Técnicas de Amplificação de Ácido Nucleico/instrumentação , Telomerase/genéticaRESUMO
Suspended particulate matter plays a significant role in the studies of sediment fluxes, phytoplankton dynamics, and water optical properties. This study focuses on the relationships between particle size distribution (PSD), water's inherent optical properties (IOPs), and water constituents. We investigated the complex waters of Poyang Lake, the largest freshwater lake in China, in wet and dry seasons during 2008-2011. Because of the distinct temporal-spatial variation of Poyang Lake, these parameters and relationships also demonstrate seasonal and regional variability. The variation range of the concentration of suspended particulate matter is 0.32-69.08 mg/l, with a mean value of 22.21 mg/l. The median particle size in the dry season is much larger than that of the wet season. The Junge distribution fits the PSD of Poyang Lake very well in the scope of 6.21-331 µm. Furthermore, the slopes of the PSD range from 3.54 to 4.69, with a mean value of 4.11, with the steepest slopes (>4.5) occurring in the waters around Songmen Mountain Island and the northern waterway. A negative correlation was found between median particle size (Dv50) and the mass-specific absorption coefficient at 443 nm [apm(443)] for both wet and dry seasons. Identical to analogous waters, the spectral slopes of the PSD correlate well with the spectral slopes of the attenuation coefficient, but with different fitted formulas. In the dry season, the particle size can better explain the variability of the scattering coefficient, while the mass-specific scattering coefficient is better explained by the apparent density. However, no similar results were found for the wet season. In addition, the spectral slopes of the backscattering coefficient correlated well with the PSD slope, and the bulk refractive index calculated from the backscattering ratio and PSD slope can indicate the particle composition of Poyang Lake. Overall, the knowledge on the PSD and IOPs gained in this study broadens our understanding of water optics in highly turbid water columns.
RESUMO
Silver nanorods/polyimide (Ag-NRs/PI) nanocomposites with high conductivity (An order of magnitude higher than pure PI), frequency-independent dielectric permittivity (3.8-4.2) and low dielectric loss (<0.05) were prepared by an in-situ polymerization process. Ag-nanorods with a mean width of approximately 300 nm and an average length over 8 microm were synthesized in the presence of polyvinylpyrrolidone (PVP) and NaCl by polyol process. SEM images showed that metallic Ag-nanorods were well dispersed in PI matrix. The structure of Ag-NRs was not destroyed or changed in nanocomposite films and the order of PI molecular chains was maintained as well. The orientation of the Ag-NRs in the PI matrix improved the mechanical properties of nanocomposite films. TGA results showed that the thermal property of nanocomposite films was almost as good as pure PI.