Transparent multifunctional cellulose-based conductive hydrogel for wearable strain sensors and arrays.

Conductive hydrogels as promising candidate materials for flexible strain sensors have gained considerable attentions. However, it is still a great challenge to construct hydrogel with multifunctional performance via natural polymer. Herein, a novel multifunctional conductive hydrogel based on methylcellulose and cellulose nanocrystal was prepared via a facile and low-cost strategy. Methylcellulose (MC) was introduced to not only guarantee the stability of tannic acid coated cellulose nanocrystal (TA@CNCs) in LiCl solution, but also improve anti-freezing ability. The obtained hydrogel exhibited high transparency (98 % at 800 nm), good stretchability (663.1 %), low temperature tolerance (-23.9 °C), superior conductivity (2.89 S/m) and excellent UV shielding behavior. Flexible strain sensor assembled by the prepared hydrogels can be used to detect human body motions include subtle and large motions, and exhibited good sensitivity and stability over a wide temperature range. Multiple flexible hydrogels can also be assembled into a 3D sensor array to detect the distribution and magnitude of spatial pressure. Therefore, the hydrogels prepared via natural polymers will have broad application prospects in wearable devices, electronic skin and multifunctional sensor components.

Surface modification of chitin nanofibers with dopamine as efficient nanosorbents for enhanced removal of dye pollution and metal ions.

The development of environmentally friendly and low-cost adsorbents with high adsorption capacity remains a challenge. Herein, chitin nanofiber-polydopamine composite materials (CNDA) have been obtained by surface modification of chitin nanofiber using dopamine. According to the results of transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier Transform Infrared Spectrometer (FTIR), and X-ray photoelectron spectrometer (XPS), polydopamine have been successfully coated on the surface of chitin nanofiber (ChNF). The ability to remove methylene blue (MB) has been analyzed via standard adsorption experiments, indicating that the maximum adsorption capacity (qmax) can reach 196.6 mg/g at MB initial concentration of 50 mg/L. Most importantly, the adsorption kinetics, isotherm, and thermodynamics were used to investigate the MB adsorption mechanism on composites. This indicated that the polydopamine on the surface of chitin nanofiber (ChNF) plays an important role in the MB dye adsorption. Moreover, the removal ability of CNDA to metal ions has also been investigated, indicating high capacities for Fe3+, Mn2+, Cu2+, and Ni2+. Based on their biodegradability and good adsorption capacity, the CNDA composite material can be considered a promising adsorbent for wastewater treatment.

Highly stretchable, tough and conductive chitin nanofiber composite hydrogel as a wearable sensor.

To meet the requirements of eco-friendly and sustainability in the 21st century, hydrogels based on biopolymer with conductivity and stretchable property have attained increasing attention for strain sensor. However, the as-prepared of hydrogel sensor with excellent mechanical property and high strain sensitivity is still a challenge. In this study, chitin nanofiber (ChNF) reinforced composite hydrogels of PACF are fabricated via a facile one-pot method. The obtained PACF composite hydrogel exhibits good transparency (80.6 % at 800 nm)and excellent mechanical properties (tensile strength, 261.2 kPa; tensile strain as high as 550.3 %). Moreover, the composite hydrogels also demonstrate excellent anti-compression performance. The composite hydrogels own good conductivity (1.20 S/m) and strain sensitivity. Most importantly, the hydrogel can be assembled as a strain/pressure sensor for detecting large-scale and small-scale human motion. Therefore, flexible conductive hydrogel strain sensors will have broad application prospects in artificial intelligence, electronic skin, and personal health.

Chitosan-based transparent and conductive hydrogel with highly stretchable, adhesive and self-healing as skin-like sensor.

Hydrogel sensors attained increasing attention due to their excellent mechanical and sensing properties. However, it is still a big challenge to fabricate hydrogel sensors with multifunctional properties of transparent, high stretchability, self-adhesive and self-healing ability. In this study, chitosan as a natural polymer has been employed to construct a polyacrylamide-chitosan-Al3+ (PAM-CS-Al3+) double network (DN) hydrogel with high transparency (>90 % at 800 nm), good electrical conductivity (up to 5.01 S/m) and excellent mechanical properties (strain and toughness as high as 1040 % and 730 kJ/m3). Moreover, the dynamic ionic and hydrogen bond interaction between PAM and CS endowed the PAM-CS-Al3+ hydrogel good self-healing ability. In addition, the hydrogel possesses good self-adhesive ability on different substrates, including glass, wood, metal, plastic, paper, polytetrafluoroethylene (PTFE) and rubber. Most importantly, the prepared hydrogel could be assembled into transparent, flexible, self-adhesive, self-healing and high sensitive strain/pressure sensor for monitoring human body movement. This work may pave the way for fabricating the multifunctional chitosan-based hydrogels which has potential application in the fields of wearable sensor and soft electronic devices.

KOtBu-Promoted, Three-Component Domino Reaction of Arenes(indoles/phenols), C60, and (Per/poly)fluoroarenes: Achieving Direct C-C Cross-Coupling of Fullerene with (Per/poly)fluoroarenes.

A KOtBu-promoted, three-component cross-coupling of arenes(indoles/phenols), C60, and (per/poly)fluoroarenes has been established for the one-pot efficient synthesis of various 1,4-arene-bridged bis(polyfluoroaryl)-functionalized [60]fullerenes. This developed reaction system demonstrates good functional group compatibilities with broad substrate scope, which exhibits high regio- and chemoselectivities. Further control experiment succeeded in providing a one-pot protocol for the synthesis of various 1,2-N-(per/poly)fluoroarene-substituted 1,2-(3-indole)(hydro)fullerenes.

Three-dimensional surface-enhanced Raman scattering substrates constructed by integrating template-assisted electrodeposition and post-growth of silver nanoparticles.

Three-dimensional (3D) plasmonic nano-arrays can provide high surface-enhanced Raman scattering (SERS) sensitivity, good spectral uniformity and excellent reproducibility. However, it is still a challenge to develop a simple and efficient method for fabrication of 3D plasmonic nano-arrays with high SERS performance. Here we report a facile approach to construct ordered arrays of silver (Ag) nanoparticles-assembled spherical micro-cavities using polystyrene (PS) sphere template-assisted electrodeposition and post-growth. The electrodeposited small Ag nanoparticles grow into bigger stable nanoparticles during the post-growth process, which could significantly improve the SERS sensitivity. The Ag nanoparticles-assembled 3D micro-cavity array provides much more hotspots in the excitation laser beam-covered volume than the two-dimensional counterpart. The relative standard deviation (RSD) of 612 cm-1 peak of rhodamine 6G (R6G) was calculated to be 8%, and the RSD of the characteristic peak taken from substrates of different batches was less than 10%. The detectable lower concentration as low as 1 fM was achieved for an aqueous solution of R6G. Such SERS substrate also showed high sensitivity to thiram (fungicide) and paraquat (herbicide) in water with limits of detection of 0.067 nM and 2.5 nM respectively. Furthermore, it also demonstrated that SERS detection of pesticide residues on fruits can be realized, showing a potential application in rapid monitoring food safety.

A three-dimensional nanostructure of NiFe(OH) X nanoparticles/nickel foam as an efficient electrocatalyst for urea oxidation.

Developing high-performance electrocatalysts for urea oxidation reaction (UOR) can not only solve the problem of environmental pollution, but also solve the problem of the energy crisis by producing hydrogen for electrodes. The preparation of porous three-dimensional nanostructures as efficient electrocatalysts has become important work. Here, we developed a novel three-dimensional (3D) nanostructure of NiFe(OH) X nanoparticles/nickel foam with a high active area by a simple electroplating method and a subsequent treatment with ferric ion solution. This structure shows much greater UOR activity than the control sample (Ni/Ni foam) with the potential of 1.395 V (vs. RHE) (with an overpotential of 1.025 V) for driving the current density of 100 mA cm-2 in 1.0 M KOH electrolyte with 0.33 M urea. This work not only provides rapid and large-scale preparation of a three-dimensional nanostructure, but also gives a new way to design and obtain high-performance electrocatalysts.

Biocompatible HA@Fe3 O4 @N-CDs hybrids for detecting and absorbing lead ion.

The trinary hydroxyapatite@Fe3 O4 @N-doped carbon dots (HA@Fe3 O4 @N-CDs) hybrids were prepared by one-pot hydrothermal approach and utilized to detect and remove lead ion from aqueous solution. The structures and morphologies of as-obtained nanorod-like HA@Fe3 O4 @N-CDs hybrids were characterized by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy measurements. These HA@Fe3 O4 @N-CDs hybrids possess good magnetism by magnetic hysteresis test and multi-colored fluorescence by the CLSM measurement. Furthermore, the as-obtained hybrids display excellent biocompatibility by MTT assay. Importantly, the trinary magnetic HA@Fe3 O4 @N-CDs hybrids as a green detector and adsorbent of Pb2+ were investigated. The influence of the different pH, the concentration of heavy metal, and the maximum adsorption capacity on removal efficiency was measured in detail. The maximum Pb2+ adsorption capacity on HA@Fe3 O4 @N-CDs hybrids is 450 mg/g. The kinetic mechanism was a pseudo-second order model, and the isotherm data was fitted well by the Langmuir isotherm and Freundlich model. Hence, the nanorod-like HA@Fe3 O4 @N-CDs hybrids could be a multifunctional material with significant potential applications in heavy metal detection and adsorption, bone tissue regeneration, magnetic therapy, and biomedicine. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

Recent Advances in Synthesis, Optical Properties, and Biomedical Applications of Carbon Dots.

Carbon dots (CDs) are relatively new and one of the most propitious nanomaterials ever known to humanity, primarily consisting of a carbonized carbon core with heteroatoms in organic functional groups attached. CDs show various fascinating properties, such as tunable excitation/emission, chemical inertness, photostability, low toxicity, good biocompatibility, ease of handling, and eco-friendliness. Due to the anomalous optical and chemical properties of the CDs, they have a wide range of applications in the fields of bioimaging, biosensing, photocatalysis, optoelectronics, etc. In this Review, we intend to cover the many strides in CDs chemistry, which is an emerging paradigm, in conjunction with the most recent discoveries of CDs with near-infrared fluorescence, phosphorescence, electroluminescence, chirality, and antibacterial activity. Our main emphasis will be on the contemporary evolution in synthetic strategies, optical properties, and biomedical applications of CDs in nanomedicine and nanotheranostics.

Fluorescent CDs@PCL hybrids via tartaric acid, CDs-cocatalyzed polymerization.

In this paper, the environment-friendly, water-soluble carbon dots (CDs) with stable photoluminescence (PL) have been prepared via the one-step pyrolysis of lotus leaf. Then the as-prepared CDs containing abundant hydroxylic and carboxylic groups were employed as cocatalyst with tartaric acid (TA) in ring-opening polymerization (ROP) of ε-caprolactone (ε-CL). The low-toxic organic acid TA, as main catalyst, was used to catalyze the ROP of ε-CL efficiently. The fluorescent CDs@PCL hybrids were obviously hydrophobic and they exhibited an excellent biocompatibility, and biodegradability due to the existence of PCL. Therefore the hydrophobic, biodegradable and multi-color fluorescent CDs@PCL hybrids may have potential applications in biomedicine, photocatalyst, bioimaging, and environmental analysis. Furthermore the application of CDs in catalyzing and initiating polymerization reaction will exemplify the versatility of CDs in the most unexpected fields.

Multifunctional nanotube-like Fe3O4/PANI/CDs/Ag hybrids: An efficient SERS substrate and nanocatalyst.

In this paper, the stable and environment-friendly Fe3O4 nanotubes with polyaniline (Fe3O4 NTs/PANI hybrids) have been prepared via mesoporous anodic alumina oxide (AAO) template, sol-gel method and in-situ polymerization. Then multifunctional Fe3O4 NTs/PANI/Ag hybrids have been obtained by decorating Ag nanoparticles by glucose reduction on surface of Fe3O4 NTs/PANI hybrids. The morphologies and structures of these hybrids were subsequently investigated by SEM, XRD, TEM and XPS measurements. The Fe3O4 NTs/PANI/Ag hybrids presented high catalytic activity due to the template-assisted presence, preventing Ag particulate agglomeration. Importantly, the Fe3O4 NTs/PANI/Ag hybrids achieve sensitive surface-enhanced Raman scattering (SERS) signals. Furthermore, the introduction of carbon dots (CDs) endows these hybrids good dispersion and stable photoluminescence (PL). Therefore, the obtained hybrids may have potential applications in waste water treatment, biomedicine, photocatalyst, and environmental analysis.

Mitochondria-targeting nanoplatform with fluorescent carbon dots for long time imaging and magnetic field-enhanced cellular uptake.

In this study, a biocompatible nanoplatform has been constructed on the basis of magnetic mesoporous silica nanoparticles (Fe3O4@mSiO2) via surface modification of triphenylphospine (TPP) and then conjugation with fluorescent carbon dots (CDs). The as-prepared Fe3O4@mSiO2-TPP/CDs nanoplatform shows a very low cytotoxicity and apoptosis rate in various cell lines such as A549, CHO, HeLa, SH-SY5Y, HFF, and HMEC-1. More importantly, this nanoplatform integrates long time cell imaging, mitochondria-targeting, and magnetic field-enhanced cellular uptake functionalities into an all-in-one system. Time-dependent mitochondrial colocalization in all of the cell lines has been proved by using confocal laser scanning microscopy and flow cytometry, while the multicolored fluorescence of the Fe3O4@mSiO2-TPP/CDs could remain bright and stable after coincubation for 24 h. In addition, the cellular uptake efficiency could be enhanced in a short time as a static magnetic field of 0.30 T was applied to the coincubation system of A549 and HFF cell lines. This bionanoplatform may have potential applications in targeted drug delivery for mitochondria diseases as well as early cancer diagnosis and treatment.

Synthesis and properties of antifouling poly(CL-co-zDMAEMA) zwitterionic copolymer by one-step hybrid copolymerization.

A novel biocompatible and biodegradable copolymer was synthesized by one-step hybrid copolymerization of ε-caprolactone (CL) and 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA) employing (1-tert-butyl-4,4,4-tris(dimethylamino)-2,2-bis[tris(dimethylamino)phophoranylidenamino]-2Λ5,Λ5-catenadi(phosphazene) (t-BuP4) as a catalyst. The as-synthesized copolymer was betainizated resulting in a zwitterionic copolymer poly(CL-co-zDMAEMA) and the structure of the zwitterionic copolymer was confirmed by the FT-IR, NMR, and XPS measurements. The results of dynamic light scattering (DLS) show that this zwitterionic copolymer can self-assemble into stable micelles. The results of quartz crystal microbalance with dissipation (QCM-D) analysis and MTT measurement suggest that this zwitterionic copolymer possess better protein resistance and lower cell cytotoxicity in vitro in comparison with the cationic copolymer. The pyrene solubilization measurement of copolymers poly(CL-co-zDMAEMA) indicates an excellent pyrene solubilization capacity. These zwitterionic polymer micelles can release drugs in response to specific signals, such as temperature, pH, and enzymes and have a potential application in drug delivery and gene therapy due to their good antifouling, low cytotoxicity and high pyrene solubilization.

Horseradish peroxidase-immobilized magnetic mesoporous silica nanoparticles as a potential candidate to eliminate intracellular reactive oxygen species.

Horseradish peroxidase-immobilized magnetic mesoporous silica nanoparticles (MMSNs-HRP) have been synthesized by a NHS/EDC coupling between the amino groups of horseradish peroxidase (HRP) and the carboxyl groups on the MMSNs surface. It is found that the immobilized HRP on MMSNs still retain high activity and the MMSNs-HRP can eliminate the reactive oxygen species (ROS) in Chinese hamster ovary (CHO) cells induced by the addition of H2O2 aqueous solution. Further, the fluorescent MMSN-HRP-CD nanoparticles have been prepared by attaching biocompatible, fluorescent carbon dots (CDs) to MMSNs-HRP. We have also investigated the effect of an applied magnetic field on cellular uptake of MMSNs-HRP-CDs and found that the internalization of MMSNs-HRP-CDs by CHO cells could be enhanced within 2 hours under the magnetic field. This work provides us with a novel and efficient method to eliminate ROS in living cells by using HRP-immobilized nanoparticles.

Formation of ultra-long nanoribbons by self-assembly of carbon dots and anionic oligomers for multi-colored fluorescence and electrical conduction.

We report a facile and scalable synthesis of ultra-long (>100 µm) nanoribbons based on self-assembly of positively charged carbon dots (C-dots) and anionic oligomers of styrene and 4-styrenesulfonate (PS-PSS) in a mixture of ethanol and water (4/1, v/v). The obtained hybrid (PS-PSS)/C-dot nanoribbons show a multi-colored fluorescence and an electrical conductivity of 3.368 S m(-1).

Green synthesis of nitrogen-doped carbon dots from konjac flour with "off-on" fluorescence by Fe3+ and l-lysine for bioimaging.

Highly nitrogen-doped carbon dots (N-CDs) are prepared by the pyrolysis of konjac flour under mild conditions followed with a simple extraction by ethanol and water. The N-CDs exhibit excellent pH-switched photoluminescence (PL), and their PL intensity can be facilitated by either mixing with NaOH and basic amino acids or by surface passivation with non-amine-terminated polyethylene glycols of different molecular weights. Further, the fluorescence of N-CDs can be quenched with Fe3+ and recovered with l-lysine, accompanied with a red-shift of emission wavelength. In addition, the low toxicity and strongly fluorescent N-CDs are applied for cell imaging, and the quenched fluorescence by Fe3+ can be recovered inside the living cells.

Spectra investigation on surface characteristics of graphene oxide nanosheets treated with tartaric, malic and oxalic acids.

The surface characteristics of graphene oxide nanosheets (GO) treated respectively with tartaric acid, malic acid and oxalic acid, have been investigated by mainly using optical spectroscopic methods including Fourier transform infrared spectroscopy (FT-IR), Ultraviolet-visible (UV-Vis) absorption and Raman spectroscopy. Additionally, the electrochemical property of the products has also been studied. The data revealed that oxygen-containing groups such as OH, COOH and CO on the GO surface have been almost removed and thus reduced graphene oxide nanosheets (RGN) were obtained. Interestingly, the number of sp(2) domains of RGN increases as treated by tartaric acid

Nickel nanowires induce cell cycle arrest and apoptosis by generation of reactive oxygen species in HeLa cells.

Nickel nanowires (Ni NWs) have great potential to be used as a living cell manipulation tool and developed into an anticancer agent. However, their candidacy as biomedical appliances need detailed human cell studies, such as study of the interaction between Ni NWs and tumor cells. The present study investigated the cytotoxicity of Ni NWs in HeLa cells. A dose-dependent inhibition of cell growth was observed by using the MTT assay. We demonstrated that Ni NWs induced oxidative stress by generation of reactive oxygen species (ROS). Apoptosis induction was evidenced by flow cytometry, annexin V binding assay and DAPI staining. DNA flow cytometric analysis indicated that Ni NWs significantly increased the percentages of cells in S phase compared with control cells. This process was accompanied by the loss of mitochondrial membrane potential. These results revealed that Ni NWs induced apoptosis in HeLa cells via ROS generation and cell cycle arrest.