Effect of Facet on Local Electron Density of Oxygen Vacancy in Catalysts for Nitrogen Electro-Reduction.

Oxygen-vacancy (Ov) engineering is an effective strategy to manipulate the electronic configuration of catalysts for electrochemical nitrogen reduction reaction (eNRR). The influence of the stable facet on the electronic configuration of Ov is widely studied, however, the effect of the reactive facet on the local electron density of Ov is unveiled. In this work, an eNRR electrode R(111)-TiO2/HGO is provided with a high proportion exposed reactive facet (111) of rutile-TiO2 (denoted as R(111)-TiO2) nanocrystals with Ov anchored in hierarchically porous graphite oxide (HGO) nanofilms. The R(111)-TiO2/HGO exhibits excellent eNRR performance with an NH3 yield rate of 20.68 µg h-1 cm-2, which is ≈20 times the control electrode with the most stable facet (110) exposed (R(110)-TiO2/HGO). The experimental data and theoretical simulations reveal that the crystal facet (111) has a positive effect on regulating the local electron density around the oxygen vacancy and the two adjacent Ti-sites, promoting the π-back-donation, minimizing the eNRR barrier, and transforming the rate determination step to *NNH→*NNHH. This work illuminates the effect of crystal facet on the performance of eNRR, and offers a novel strategy to design efficient eNRR catalysts.

An immunochromatographic test for serological diagnosis of scrub typhus.

A fluorescent immunochromatographic test (FM-ICT) was developed for rapid detection of anti-Orientia tsutsugamushi antibodies in serum samples. The FM-ICT was constructed based on the dual-antigen sandwich method. Truncated 56 kDa outer membrane protein of O. tsutsugamushi strain SJ, was expressed in E. coli and mixed with those of Ptan and Gillam strains. A thin line of the protein mixture was precisely sprayed across a nitrocellulose membrane making this the "Test" line. Polyclonal antibodies (pAbs) to O.tsutsugamushi were sprayed in another line across the membrane making this the "Control" line. Fluorescent microspheres conjugated 56 kDa proteins reacting with sample serum will be captured on the "Test" line if the sample contains antibodies to O.tsutsugamushi. Several experimental parameters were optimized. After optimizing the reaction procedure, the results are visible, within 6 min, with the naked eye under ultraviolet light. The limit of detection (LOD) was determined to be 7.63 ng/mL with prepared polyclonal antibodies. No cross-reaction was observed with sera samples from other febrile diseases. In clinical evaluations, the strips showed 94.92% sensitivity (106/112) and 93.75% specificity (56/60). The FM-ICT we developed will provide a new tool for on-site diagnosis of scrub typhus.

FeP-Fe3O4 nanospheres for electrocatalytic N2 reduction to NH3 under ambient conditions.

The electrocatalytic nitrogen reduction reaction (eNRR) under ambient conditions is deemed a promising alternative for NH3 synthesis. In this paper, an FeP-Fe3O4 nanocomposite electrocatalyst was prepared by phosphating annealing using Fe2O3 as a precursor, and the resulting FeP-Fe3O4 exhibited excellent N2-to-NH3-producing activity over a wide potential window. The highest faradaic efficiency of FeP-Fe3O4 is 11.02% at -0.1 V vs. reversible hydrogen electrode (RHE), and the maximum NH3 yield reaches 12.73 µg h-1 mgcat-1, comparable to or exceeding the reported values in this field. Furthermore, the FeP-Fe3O4 nanocomposite electrocatalyst presents high electrochemical stability, selectivity, and durability.

Structuring Cu Membrane Electrode for Maximizing Ethylene Yield from CO2 Electroreduction.

Electrocatalytic ethylene (C2H4) evolution from CO2 reduction is an intriguing route to mitigate both the energy and environmental crises; however, to acquire industrially relevant high productivity and selectivity at low energy cost remains to be challenging. Membrane assembly electrode has shown great prospect and tailoring its architecture for maximizing C2H4 yield at minimum voltage with long-term stability becomes critical. Here a freestanding Cu membrane cathode is designed and constructed by electrochemically depositing mesoporous Cu film on Cu foam to simultaneously manage CO2, electron, water, and product transport, which shows an extraordinary C2H4 Faradaic efficiency of 85.6% with a full cell power conversion efficiency of 33% at a current density of 368 mA cm-2, heading the techno-economic viability for electrocatalytic C2H4 production.

Muscle synergies in joystick manipulation.

Extracting muscle synergies from surface electromyographic signals (sEMGs) during exercises has been widely applied to evaluate motor control strategies. This study explores the relationship between upper-limb muscle synergies and the performance of joystick manipulation tasks. Seventy-seven subjects, divided into three classes according to their maneuvering experience, were recruited to perform the left and right reciprocation of the joystick. Based on the motion encoder data, their manipulation performance was evaluated by the mean error, standard deviation, and extreme range of position of the joystick. Meanwhile, sEMG and acceleration signals from the upper limbs corresponding to the entire trial were collected. Muscle synergies were extracted from each subject's sEMG data by non-negative matrix factorization (NMF), based on which the synergy coordination index (SCI), which indicates the size of the synergy space and the variability of the center of activity (CoA), evaluated the temporal activation variability. The synergy pattern space and CoA of all participants were calculated within each class to analyze the correlation between the variability of muscle synergies and the manipulation performance metrics. The correlation level of each class was further compared. The experimental results evidenced a positive correlation between manipulation performance and maneuvering experience. Similar muscle synergy patterns were reflected between the three classes and the structure of the muscle synergies showed stability. In the class of rich maneuvering experience, the correlation between manipulation performance metrics and muscle synergy is more significant than in the classes of trainees and newbies, suggesting that long-term training and practicing can improve manipulation performance, stability of synergy compositions, and temporal activation variability but not alter the structure of muscle synergies determined by a specific task. Our approaches and findings could be applied to 1) reduce manipulation errors, 2) assist maneuvering training and evaluation to enhance transportation safety, and 3) design technical support for sports.

The Design and Evaluation of a High-Speed Jet Dispenser Driven by Single Piezoelectric Stack.

Droplet injection methods are widely used in the applications of microelectronic manufacturing, biological engineering, and 3-D printing. This work presents a new jet dispenser driven by a single piezoelectric stack that enables the capability of drop-on-demand patterning under a high working frequency (500 Hz). Due to the special designs of the jet dispenser, a broad range of liquids, whose viscosities span more than four orders of magnitude (21-665 320 cps), can be jetted. Moreover, a coupled Coulomb damping physical model is proposed, which includes an electromechanical and a dynamic model. Both the Coulomb and the fluid-solid damping are considered in the dynamic model. In order to validate the results obtained by using MATLAB/Simulink, the experiments were carried out. The injection performance of this jet dispenser has been tested by employing a self-made jetting platform. The minimum volume of a jetting droplet is about 14.4 nL with liquid wax. The error of volume uniformity among droplets does not exceed 8%, and the error of angle trajectory is about 0.17°. Furthermore, the versatility of the jet dispenser is demonstrated by printing liquid lubricant, food, glue, silver past, and a ceramic slurry in predefined patterns.

A reconstructed porous copper surface promotes selectivity and efficiency toward C2 products by electrocatalytic CO2 reduction.

Electrocatalytic synthesis of multicarbon (C2+) products from CO2 reduction suffers from poor selectivity and low energy efficiency. Herein, a facile oxidation-reduction cycling method is adopted to reconstruct the Cu electrode surface with the help of halide anions. The surface composed of entangled Cu nanowires with hierarchical pores is synthesized in the presence of I-, exhibiting a C2 faradaic efficiency (FE) of 80% at -1.09 V vs. RHE. A partial current density of 21 mA cm-2 is achieved with a C2 half-cell power conversion efficiency (PCE) of 39% on this electrode. Such high selective C2 production is found to mainly originate from CO intermediate enrichment inside hierarchical pores rather than the surface lattice effect of the Cu electrode.