Stabilizing zinc anodes via engineering the active sites and pore structure of functional composite layers.

Functional composite layers composed of an amino-functionalized zirconium 1,4-dicarboxybenzene metal-organic framework were constructed on zinc anodes to mitigate the interface disturbances in aqueous batteries. These layers enable robust Zn2+ adsorption and homogenized Zn2+ transport and deposition kinetics, facilitating achieving high stability in a symmetric cell (3500 h) and a full cell (35 000 cycles, 96.7%).

Engineering dual-crystal configurations in perovskite oxides boosts electrocatalysis of lithium-oxygen batteries.

Sculpting crystal configurations can vastly affect the charge and orbital states of electrocatalysts, fundamentally determining the catalytic activity of lithium-oxygen (Li-O2) batteries. However, the crucial role of crystal configurations in determining the electronic states has usually been neglected and needs to be further examined. Herein, we introduce orthorhombic and trigonal system into 0.5La0.6Sr0.4MnO3-0.5LaMn0.6Co0.4O3 (LSMCO) by selectively incorporating Sr and Co cations into the LaMnO3 framework during the sol-gel process, which is used to explore the relationship among crystal structure, electronic states and catalytic performance. Based on both experimental and theoretical calculations, the dual-crystal configurations induce strong lattice distortion, which promotes MnO6 octahedra vibration and shortened MnO bonds. Furthermore, the suppressed Jahn-Teller distortion weakens the orbital arrangement and accelerates the charge delocalization, leading to the conversion of Mn3+ to Mn4+ and optimized electronic states. Ultimately, this resulted in optimized Mn 3d and O 2p orbital hybridization and activated lattice oxygen function, leading to a significant improvement in electrocatalytic activity. The LSMCO catalyzed Li-O2 battery achieves enhanced discharge capacity of 14498.7 mAh/g and cycling stability of 258 cycles. This work highlights the significance of inner structure and presents a feasible strategy for engineering crystal configurations to boost electrocatalysis of Li-O2 batteries.

Artificial bi-functional layers promoting Zn2+ desolvation and homogeneous deposition for reversible zinc metal anodes.

Rechargeable aqueous zinc-ion hybrid supercapacitors (ZHSs) are drawing extensive attention because of their cost-effectiveness and diminished safety hazards. Nevertheless, large-scale application of ZHSs has been hindered by the severe side reactions and rampant dendrites growth on the surface of Zn metal anodes. Herein, we propose a three-dimensional organic-inorganic composite frame material as an artificial bi-functional layer coated on the zinc foil, featuring nitrogenous functional groups with zincophilicity (abbreviated as NCFM@Zn). The nitrogen (N) site's strong adsorption capacity and synergistic effect of the sub-nanopore size promote rapid desolvation of zinc ions and reduce side reactions, while also prolonging galvanized nucleation's Sand's time and allowing for even nucleation. Moreover, the uniform distribution of N on the layer results in homogeneous zinc ions flux and supports consistent zinc plating while inhibiting dendrites generation. As a result of this unique artificial bi-functional layer, symmetric Zn cells can survive 2500 h at 2.5 mA cm-2. High-areal-capacity zinc||activated carbon hybrid supercapacitors also demonstrate 20,000 cycles at high Coulombic efficiency, thus highlighting the utter convenience and potential of this strategy for modifying rechargeable metal hybrid supercapacitor surfaces.

Manipulating hydrogen and coordination bond chemistry for reversible zinc metal anodes.

Aqueous zinc ion hybrid capacitors (ZHCs) are promising as electrochemical energy storage devices due to their safety and cost-effectiveness. However, the practical application of aqueous ZHCs is impeded by zinc dendrite growth and side reactions induced by H2O during long-term cycling. Herein, an organic small molecule, dimethyl sulfoxide (DMSO), is elaborately introduced into 2 M ZnSO4 electrolyte to simultaneously overcome these challenges. As convincingly evidenced by experimental and theoretical results, the DMSO reconstructs the Zn[(H2O)6]2+ structure and original hydrogen bond networks at the molecular level. By forming coordination bonds with Zn2+ and hydrogen bonds with H2O due to the stronger electron donating ability of oxygen in molecule, DMSO establishes a Zn2+ solvation shell structure that inhibits H2O decomposition and dendrite growth. As a proof of concept, the implementation of this hybrid electrolyte in a Zn||Cu asymmetrical cell results in a high Coulombic efficiency (CE) of over 99.8% for 568 cycles at a current density of 2 mA cm-2. Furthermore, the full cells using this hybrid electrolyte coupled with activated carbon (AC) cathode can operate for over 30,000 cycles. These results suggest that reconstructing the solvation structure and hydrogen bond networks guide the design of electrolytes for the development of high-performance aqueous ZHCs.

Identifying the Role of Lewis-base Sites for the Chemistry in Lithium-Oxygen Batteries.

Lewis-base sites have been widely applied to regulate the properties of Lewis-acid sites in electrocatalysts for achieving a drastic technological leap of lithium-oxygen batteries (LOBs). Whereas, the direct role and underlying mechanism of Lewis-base in the chemistry for LOBs are still rarely elucidated. Herein, we comprehensively shed light on the pivotal mechanism of Lewis-base sites in promoting the electrocatalytic reaction processes of LOBs by constructing the metal-organic framework containing Lewis-base sites (named as UIO-66-NH2 ). The density functional theory (DFT) calculations demonstrate the Lewis-base sites can act as electron donors that boost the activation of O2 /Li2 O2 during the discharged-charged process, resulting in the accelerated reaction kinetics of LOBs. More importantly, the in situ Fourier transform infrared spectra and DFT calculations firstly demonstrate the Lewis-base sites can convert Li2 O2 growth mechanism from surface-adsorption growth to solvation-mediated growth due to the capture of Li+ by Lewis-base sites upon discharged process, which weakens the adsorption energy of UIO-66-NH2 towards LiO2 . As a proof of concept, LOB based on UIO-66-NH2 can achieve a high discharge specific capacity (12 661 mAh g-1 ), low discharged-charged overpotential (0.87 V) and long cycling life (169 cycles). This work reveals the direct role of Lewis-base sites, which can guide the design of electrocatalysts featuring Lewis-acid/base dual centers for LOBs.

Chromium-doped inverse spinel electrocatalysts with optimal orbital occupancy for facilitating reaction kinetics of lithium-oxygen batteries.

Tailored electrocatalysts that can modulate their electronic structure are highly desirable to facilitate the reaction kinetics of oxygen evolution reaction (OER) and oxidation reduction reaction (ORR) in lithium-oxygen batteries (LOB). Although octahedron predominant inverse spinels (e.g., CoFe2O4) have been proposed as promising candidates for catalytic reactions, their performance has remained unsatisfactory. Herein, the chromium (Cr) doped CoFe2O4 nanoflowers (Cr-CoFe2O4) are elaborately constructed on nickel foam as a bifunctional electrocatalyst that drastically improves the performance of LOB. The results show that the partially oxidized Cr6+ stabilizes the cobalt (Co) sites at high-valence and regulates the electronic structure of Co sites, facilitating the oxygen redox kinetics of LOB due to their strong electron-withdrawing capability. Moreover, DFT calculations and ultraviolet photoelectron spectrometer (UPS) results consistently demonstrate that Cr doping optimizes the eg electron filling state of the active octahedral Co sites, significantly improves the covalency of Co-O bonds, and enhances the degree of Co 3d-O 2p hybrids. As a result, Cr-CoFe2O4 catalyzed LOB can achieve low overpotential (0.48 V), high discharge capacity (22030 mA h g-1) and long-term cycling durability (over 500 cycles at 300 mA g-1). This work promotes the oxygen redox reaction and accelerates the electron transfer between Co ions and oxygen-containing intermediates, highlighting the potential of Cr-CoFe2O4 nanoflowers as bifunctional electrocatalysts for LOB.

Band engineering in heterostructure catalysts to achieve High-Performance Lithium-Oxygen batteries.

The electronic structure of cathode catalysts dominates the electrochemistry reaction kinetics in lithium-oxygen batteries. However, conventional catalysts perform inferior intrinsic activity due to the low d-band level of the active sites makes it difficult to bond with the reaction intermediates, which results in poor electrochemical performance of lithium-oxygen batteries. Herein, NiFe2O4/MoS2 heterostructures are elaborately constructed to reach an electronic state balance for the active sites, which realizes the upper shift of the d-band level and enhanced adsorption of intermediates. Density functional theory calculation suggests that the d-band center of Fe active sites on the heterostructure moves toward the Fermi level, demonstrating the heterointerface engineering endows Fe active sites with high d-band level by the transfer and balance of electron. As a proof of concept, lithium-oxygen battery catalyzed by NiFe2O4/MoS2 exhibits a large specific capacity of 21526 mA h g-1 and an extended cycle performance for 268 cycles. Moreover, NiFe2O4/MoS2 with strong adsorption to intermediates promotes the uniform growth of discharge products, which is favor of the reversible decomposition during cycling. This work presents the energy band regulation of the active sites in heterostructure catalysts has great feasibility for enhancing catalytic activities.

Air-Stable Protective Layers for Lithium Anode Achieving Safe Lithium Metal Batteries.

With markedly expansive demand in energy storage devices, rechargeable batteries will concentrate on achieving the high energy density and adequate security, especially under harsh operating conditions. Considering the high capacity (3860 mA h g-1 ) and low electrochemical potential (-3.04 V vs the standard hydrogen electrode), lithium metal is identified as one of the most promising anode materials, which has sparked a research boom. However, the intrinsically high reactivity triggers a repeating fracture/reconstruction process of the solid electrolyte interphase, side reactions with electrolyte and lithium dendrites, detrimental to the electrochemical performance of lithium metal batteries (LMBs). Even worse, when exposed to air, lithium metal will suffer severe atmospheric corrosion, especially the reaction with moisture, leading to grievous safety hazards. To settle these troubles, constructing air-stable protective layers (ASPLs) is an effective solution. In this review, besides the necessity of ASPLs is highlighted, the modified design criteria, focusing on enhancing chemical/mechanical stability and controlling ion flux, are proposed. Correspondingly, current research progress is comprehensively summarized and discussed. Finally, the perspectives of developing applicable lithium metal anodes (LMAs) are put forward. This review guides the direction for the practical use of LMAs, further pushing the evolution of safe and stable LMBs.

[A calibration phantom system for QCT bone mineral density determination].

This paper describes a calibration phantom system for QCT bone mineral density determination, which consists of 4-standard-solid-sample calibration phantom, a quality assurance (QA) phantom and the bone mineral density analysis software. The system adds to the new applications of CT systems, and provides a new method with a good accuracy and reliability for the examination, diagnosis, prevention, treatment of osteoporosis diseases and the observation of curative effect of drugs.