Regenerated grating produced in a multimaterial glass-based photosensitive fiber with an ultrahigh thermal regeneration ratio.

This work demonstrates thermal regeneration of gratings inscribed in a new type of multi-material glass-based photosensitive fiber. And isothermal annealing procedure has been carried out on a type-I seed grating (SG) imprinted in erbium-doped zirconia-yttria-alumina-germanium (Er-ZYAG) silica glass-based fiber, which is initiated from room temperature of 25°C up to 900°C. The findings show that the created regenerated grating (RG) has an ultrahigh thermal regeneration ratio with a value of 0.72.

Mach-Zehnder interferometric magnetic field sensor based on a photonic crystal fiber and magnetic fluid.

A Mach-Zehnder interferometric magnetic field sensor based on a photonic crystal fiber (PCF) and magnetic fluid (MF) was designed and experimentally demonstrated. The sensing probe consists of a single-mode-(SM)-multimode-PCF-SM fiber structure through arc fusion splicing. It was then laser engrave notched with the femtosecond laser so that the PCF cladding was selectively infilled MF. A well-defined interference pattern was obtained on account of the tunable refractive index of the MF infilled PCF cladding. The transmission spectra of the proposed sensor under different magnetic field intensities have been measured and theoretically analyzed. The results show that the sensitivity of the proposed sensor can reach -0.13 dB/mT and 0.07334 nm/mT in the magnetic field intensity from 1 mT to 20 mT and 2 mT to 20 mT, respectively.

Observation of grating regeneration by direct CO(2) laser annealing.

In this work, we have demonstrated for the first time grating regeneration in hydrogenated fibers by direct CO(2) laser annealing. During the annealing process, the center wavelength redshifts as the intensity of the focused CO(2) laser on the grating is elevated. The reflectivity of the grating begins to decay as the temperature induced in the grating approaches the erasure temperature. The grating is completely erased and regenerated afterwards. The observed spectral results have provided the proof of occurrence of dehydroxylation and stress relaxation in the fiber core during the annealing process. Regenerated gratings with low loss, good temperature sensitivities and sustainability have been successfully developed by this technique.

Thermal stress modification in regenerated fiber Bragg grating via manipulation of glass transition temperature based on CO2-laser annealing.

In this work, we have demonstrated thermal stress relaxation in regenerated fiber Bragg gratings (RFBGs) by using direct CO2-laser annealing technique. After the isothermal annealing and slow cooling process, the Bragg wavelength of the RFBG has been red-shifted. This modification is reversible by re-annealing and rapid cooling. It is repeatable with different cooling process in the subsequent annealing treatments. This phenomenon can be attributed to the thermal stress modification in the fiber core by means of manipulation of glass transition temperature with different cooling rates. This finding in this investigation is important for accurate temperature measurement of RFBG in dynamic environment.

Thermal regenerated grating operation at temperatures up to 1400°C using new class of multimaterial glass-based photosensitive fiber.

The work demonstrates for the first time a thermal regenerated grating (RG) operating at an ultra-high temperature up to 1400°C. A new class of photosensitive optical fiber based on erbium-doped yttrium stabilized zirconia-calcium-alumina-phospho silica (Er-YZCAPS) glass is fabricated using modified chemical vapor deposition (MCVD) process, followed by solution doping technique and conventional fiber drawing. A type-I seed grating inscribed in this fiber is thermal regenerated based on the conventional thermal annealing technique. The investigation result indicates that the produced RG has an ultrahigh temperature sustainability up to 1400°C. The measured temperature sensitivities are 14.1 and 15.1 pm/°C for the temperature ranges of 25°C-1000°C and 1000°C-1400°C, respectively.

Spectral analysis of bent fiber Bragg gratings: theory and experiment.

This Letter presents a simple mathematical model developed from coupled-mode theory to describe the relationship between Bragg transmission loss (BTL), grating length, coupling coefficients, and bending loss in a bent fiber Bragg grating. In our investigation, the finding indicates that the decrement of BTL can be attributed to the increasing bending loss and degradation of both dc and ac coupling coefficients as the bending radius decreases. Besides, the center wavelength shifts as a result of coupling coefficients degradation. The validity of the proposed model is supported by experimental result.

Reflection spectra of etched FBGs under the influence of axial contraction and stress-induced index change.

We present a new theoretical model for the broadband reflection spectra of etched FBGs which includes the effects of axial contraction and stress-induced index change. The reflection spectra of the etched FBGs with several different taper profiles are simulated based on the proposed model. In our observation, decaying exponential profile produces a broadband reflection spectrum with good uniformity over the range of 1540-1560 nm. An etched FBG with similar taper profile is fabricated and the experimental result shows good agreement with the theoretical model.

Axial contraction in etched optical fiber due to internal stress reduction.

When an optical fiber is dipped in an etching solution, the internal stress profile in the fiber varies with the fiber diameter. We observed a physical contraction as much as 0.2% in the fiber axial dimension when the fiber was reduced from its original diameter to ~6 µm through analysis using high resolution microscope images of the grating period of an etched FBG at different fiber diameters. This axial contraction is related to the varying axial stress profile in the fiber when the fiber diameter is reduced. On top of that, the refractive index of fiber core increases with reducing fiber diameter due to stress-optic effect. The calculated index increment is as much as 1.8 × 10(-3) at the center of fiber core after the diameter is reduced down to ~6 µm. In comparison with the conventional model that assumes constant grating period and neglects the variation in stress-induced index change in fiber core, our proposed model indicates a discrepancy as much as 3nm in Bragg wavelength at a fiber diameter of ~6 µm.