RESUMO
PURPOSE: This study aimed to propose a revision of the evaluation objectives of the Korean Dentist Clinical Skill Test by analyzing the opinions of those involved in the examination after a review of those objectives. METHODS: The clinical skill test objectives were reviewed based on the national-level dental practitioner competencies, dental school educational competencies, and the third dental practitioner job analysis. Current and former examinees were surveyed about their perceptions of the evaluation objectives. The validity of 22 evaluation objectives and overlapping perceptions based on area of specialty were surveyed on a 5-point Likert scale by professors who participated in the clinical skill test and dental school faculty members. Additionally, focus group interviews were conducted with experts on the examination. RESULTS: It was necessary to consider including competency assessments for "emergency rescue skills" and "planning and performing prosthetic treatment." There were no significant differences between current and former examinees in their perceptions of the clinical skill test's objectives. The professors who participated in the examination and dental school faculty members recognized that most of the objectives were valid. However, some responses stated that "oromaxillofacial cranial nerve examination," "temporomandibular disorder palpation test," and "space management for primary and mixed dentition" were unfeasible evaluation objectives and overlapped with dental specialty areas. CONCLUSION: When revising the Korean Dentist Clinical Skill Test's objectives, it is advisable to consider incorporating competency assessments related to "emergency rescue skills" and "planning and performing prosthetic treatment."
Assuntos
Competência Clínica , Avaliação Educacional , Grupos Focais , Humanos , Competência Clínica/normas , República da Coreia , Avaliação Educacional/métodos , Inquéritos e Questionários , Odontólogos , Educação em Odontologia/métodos , MasculinoRESUMO
OBJECTIVE: To investigate the growth patterns of the maxillomandibular complex in preadolescent patients with Pierre-Robin sequence (PRS). METHODS: The samples consisted of 20 preadolescent PRS patients who had cleft palate and did not undergo growth-modification therapy or surgical intervention [6 boys and 14 girls; mean age of lateral cephalograms taken, 8.8 y (T1) and 13.7 y (T2)]. According to k-means cluster analysis, four clusters were defined over 3 major groups at T1: (1) Both very retrusive maxilla and mandible group: Cluster-4 [n=4, very large gonial angle, very low facial height ratio (FHR)] and Cluster-1 (n=5, small gonial angle, normal FHR); (2) Retrusive maxilla and very retrusive mandible group (Cluster-3, n=7, normal gonial angle, very low FHR); and (3) Both normal maxilla and mandible group (Cluster-2, n=4, very large gonial angle, low FHR). Seven angular and ratio variables [sella-nasion-A point (SNA), sella-nasion-B point (SNB), A point-nasion-B point (ANB), saddle angle, gonial angle, mandibular-body-length/anterior-cranial-base-length (MBL/ACBL), and FHR] at T1 and T2 and growth change from T1 to T2 were investigated. RESULTS: At T1, SNA, SNB, saddle angle, gonial angle (all P<0.05), and FHR (P<0.01) showed significant difference among 4 clusters. At T2, SNA, SNB and gonial angle (all P<0.05) still showed significant difference among 4 clusters. During T1 to T2, there was no significant change in variables at each cluster except an increase in MBL/ACBL in Cluster-1 and FHR in Cluster-3 (all P<0.05). CONCLUSIONS: Preadolescent PRS patients exhibited diverse skeletal phenotypes at T1, which did not change significantly from their original skeletal patterns by growth during T1 to T2.
RESUMO
Few studies have reported a complete quantitative database of cranial growth, from infancy to adulthood, as a reference through three-dimensional analysis. Our study aimed to characterize cranial growth patterns using craniometric parameters by establishing sex- and age-specific norms. In total, 1009 Korean patients (male-to-female ratio, 2:1; age range, 0-18 years) who underwent thin-slice computed tomography (CT) scans for head trauma were divided into 20 age groups, with a 6-month interval for those under 2 years and a 1-year interval for those over 2 years. After four reference planes [Frankfurt horizontal (FH), midsagittal, and two coronal planes passing the sella (S) and basion (B)] had been established, intracranial volume (ICV), anteroposterior diameter (APD), biparietal diameter (BPD), cranial heights (CHs), cephalic index (CI, BPD/APD), and height index (HI, CH-B/APD) were measured using Mimics software. Best-fit logarithmic curves were derived using a linear regression model. The best-fit curves for ICV (cm3) were y = 785.6 + 157*ln(age) for males (R2 = 0.5752) and y = 702 + 150.5*ln(age) for females (R2 = 0.6517). After adjustment for age, males had higher values of ICV, APD, BPD, and CHs than females (all p < 0.0001). ICV, APD, BPD, and CHs demonstrated a rapid increase during the first few months of life, reaching 90-95% of the adult size by 5-6 years of age, while CI and HI showed a continuous decline by 4%, regardless of sex. This study presented cranial growth references for more than 1000 of the Korean population aged up to 18 years. This might help to provide guidelines for diagnosis and treatment (including timing, amount, and direction) for cranial reconstruction in pediatric patients with craniosynostosis.
Assuntos
Craniossinostoses , Crânio , Adolescente , Criança , Pré-Escolar , Feminino , Humanos , Lactente , Recém-Nascido , Masculino , Cefalometria/métodos , Craniossinostoses/cirurgia , Crânio/diagnóstico por imagem , Crânio/cirurgia , Tomografia Computadorizada por Raios X/métodos , População do Leste AsiáticoRESUMO
The purpose of this study was to characterize the spheno-occipital synchondrosis fusion (SOSF) from preadolescents to young adults. A total of 630 Korean subjects (308 men, 322 women; age range, 6-18 y) were divided into 26 groups according to sex and age. After 3-dimensional computed tomography (CT) images were reoriented using the Frankfort horizontal (FH) plane, mid-sagittal plane, and frontal plane via ON3D software (3DONS), the cervical vertebrae maturation index (CVMI) and SOSF stages were identified using 6-stage and 5-stage scoring systems, respectively. The distributions of stage in each group were statistically investigated. Women showed early appearance and a short range of onset (CVMI stage 2, SOSF stage 2), middle (CVMI stage 4, SOSF stage 3 and stage 4), and completion (CVMI stage 6, SOSF stage 5), indicating rapid skeletal maturation compared with men. In both males and females, there were strong positive correlations between age and CVMI stage (rs=0.902, rs=0.890), between age and SOSF stage (rs=0.887, rs=0.885), and between CVMI and SOSF stages (rs=0.955, rs=0.964) (all P<0.001). The mean ages at SOSF stage 3 and stage 4 (12.7~13.9 y in males and 11.0~12.5 y in females) could be used as indicators of the pubertal growth peak. Regression equations for SOSF stage (y), age (a), and CVMI stage (b) were as follows: y=1.355-(0.133×a)+(0.29007×b)+(0.041×a×b) for males (r2=0.9496); y=1.305-(0.158×a)+(0.455×b)+(0.036×a×b) for females (r2=0.9606). Ordinal logistic regression analyses with the proportional odds model showed that females had more advanced SOSF stages than males (odds ratio: 1.972; 95% CI: 1.063-3.658, P<0.05). Our findings may provide basic references for CVMI and SOSF from preadolescents to young adults.
RESUMO
The purpose of this study was to classify the skeletal phenotypes of adult patients with skeletal class III (C-III) malocclusion and unilateral or bilateral cleft lip and palate using principal component analysis and cluster analysis. The samples consisted of 81 adult C-III patients with cleft lip and palate (CLP) who underwent orthognathic surgery (OGS) or distraction osteogenesis (59 males and 22 females; 50 unilateral cleft lip and palate and 31 bilateral cleft lip and palate; mean age when lateral cephalograms were taken, 22.2±4.6 y). Thirteen angular and one ratio cephalometric variables were measured. Using 4 representative variables obtained from principal component analysis (SNA, SNB, Gonial angle, and Bjork sum), K-means cluster analysis was performed to classify the phenotypes. Then, statistical analysis was conducted to characterize the differences in the variables among the clusters. Five clusters were obtained from 3 groups: severely retrusive maxilla and moderately retrusive mandible group: cluster-1 (23.5%, severely hyperdivergent pattern), cluster-4 (27.2%, moderately hyperdivergent pattern), and cluster-5 (11.1%, normodivergent pattern); moderately retrusive maxilla and normal mandible group: cluster-2 (30.9%, normodivergent pattern); normal maxilla and moderately protrusive mandible group: cluster-3 (7.4%, normodivergent pattern). Although skeletal phenotypes were diverse, distribution of sex and cleft type did not differ among 5 clusters ( P >0.05). Sixty-two percent of cleft patients showed a severely retrusive maxilla and moderately retrusive mandible (cluster-1, cluster-4, and cluster-5), which indicated that these are the main cause of skeletal C-III malocclusion in CLP patients who were treated with OGS. Therefore, it is necessary to consider presurgical orthodontic treatment and surgical planning based on the skeletal phenotypes of CLP patients.
Assuntos
Fenda Labial , Fissura Palatina , Má Oclusão Classe III de Angle , Masculino , Feminino , Humanos , Adulto , Fenda Labial/cirurgia , Fenda Labial/complicações , Fissura Palatina/cirurgia , Fissura Palatina/complicações , Análise de Componente Principal , Má Oclusão Classe III de Angle/cirurgia , Má Oclusão Classe III de Angle/etiologia , Mandíbula/cirurgia , Maxila/cirurgia , CefalometriaRESUMO
The purpose of this study was to investigate the distribution and phenotype of Goldenhar syndrome (GS) and its association with other anomalies. The samples consisted of 18 GS patients (6 males and 12 females; mean age at investigation, 7.4 ± 4.8 y) who were treated or followed up at the Department of Orthodontics, Seoul National University Dental Hospital between 1999 and 2021. The prevalence of side involvement and degree of mandibular deformity (MD), midface anomalies, and association with other anomalies were evaluated using statistical analysis. The prevalence of unilateral and bilateral MD did not differ (55.6% versus 44.4%). In unilateral MD cases, there was a tendency for higher prevalence of more severe Pruzansky-Kaban types than mild ones (type I, 10%; type IIa, 10%; type IIb, 50%; type III, 30%). Despite hypoplasia of the condyle/ramus complex, compensatory mandibular body growth occurred in 33.3% of GS patients (more severe side in bilateral MD cases, 37.5%, and ipsilateral side in unilateral MD cases, 30%). Class II molar relation was more prevalent than class I and class III molar relations (72.2% versus 11.1% versus 16.7%, P <0.01). Al total of 38.9% of patients had congenitally missing tooth. #7 facial cleft was found in 44.4% of patients. In midface anomalies, ear problem was the most common anomaly, followed by hypoplasia/absence of zygomatic arch and eye problem (88.9% versus 64.3% versus 61.1%, P <0.01). Association with the midface, spine, cardiovascular, and limb anomalies did not differ between unilateral and bilateral MD cases. These results might provide a basic guideline for diagnosis and treatment planning for GS patients.
RESUMO
The purpose of this study was to classify and characterize facial asymmetry (FA) phenotypes in adult patients with unilateral cleft lip and palate (UCLP) and skeletal class III malocclusion. The samples comprised 52 adult UCLP patients (36 men and 16 women; mean age, 22.43 y) who had undergone orthognathic surgery for correction of class III malocclusion. After measurement of 22 cephalometric parameters in posteroanterior cephalograms taken 1 month before orthognathic surgery, principal component analysis was performed to obtain 5 representative parameters [deviation (mm) of ANS (ANS-dev), maxillary central incisor contact point (Mx1-dev), and menton (Me-dev); cant (degree) of the maxillary anterior occlusal plane (MxAntOP-cant) and mandibular border (MnBorder-cant)]. K-means cluster analysis was conducted using these representative parameters. The differences in cephalometric parameters among the clusters were statistically analyzed. The FA phenotypes were classified into 4 types: No-cant-and-No-deviation type (cluster-4, n=16, 30.8%); MxMn-cant-MxMn-dev to the cleft-side type (cluster-3, n=4, 7.7%); Mx-cant-Mn-shift to the cleft-side type (cluster-2, n=15, 28.8%); and Mn-cant-Mn-dev to the noncleft-side type (cluster-1, n=17, 32.7%). Asymmetry in the maxilla and/or mandible were observed in 70% of patients. One third of patients (cluster-2 and cluster-3; sum, 36.5%) exhibited significant cant of MxAntOP induced by cleft and cant or shift of the mandible to the cleft side. Another one third of patients (cluster-1, 32.7%) demonstrated significant deviation and cant of the mandible to the noncleft-side despite cleft in the maxilla. This FA phenotype classification might be a basic guideline for diagnosis and treatment planning for UCLP patients.
Assuntos
Fenda Labial , Fissura Palatina , Má Oclusão Classe III de Angle , Feminino , Humanos , Fenda Labial/cirurgia , Assimetria Facial/cirurgia , Fissura Palatina/cirurgia , Análise de Componente Principal , Estudos Retrospectivos , Má Oclusão Classe III de Angle/diagnóstico por imagem , Má Oclusão Classe III de Angle/cirurgia , Maxila/cirurgia , CefalometriaRESUMO
INTRODUCTION: This study aimed to evaluate the differences in the precision, trueness, and accuracy of 3-dimensional (3D) printed clear orthodontic retainers fabricated using printer systems with different printing technologies. METHODS: Retainers (n = 15) were 3D printed using 4 different printers: stereolithography (SLA), digital light processing (DLP), continuous DLP, and polyjet photopolymer (PPP) printers. Printed retainers were transformed into a digital image through a cone-beam computed tomography scan and compared with the original image using 3D superimposition analysis software. At previously chosen landmarks (R6, L6, R3, L3, R1, and L1), intaglio surfaces of the retainers were compared to that of the reference model. The intercanine and the intermolar width measurements were also assessed. A discrepancy of up to 0.25 mm between the printed retainer and the reference retainer intaglio surfaces indicated accuracy and clinical acceptability. Precision and trueness were also determined. Root mean square and percent of points within the tolerance level were calculated for precision and trueness for each retainer. Statistical significance was set at P <0.05. RESULTS: Interrater correlation coefficient indicated good agreement. Statistically significant differences were found between printer types among the 6 landmarks and the arch width measurements. When evaluating tolerance level and root mean square, statistically significant differences in median precision and trueness among each printer type were found. CONCLUSION: Retainers fabricated by SLA, DLP, continuous DLP, and PPP technologies were shown to be clinically acceptable and accurate compared to the standard reference file. Based on both high precision and trueness, SLA and PPP printers yielded the most accurate retainers.
Assuntos
Modelos Dentários , Impressão Tridimensional , Humanos , Contenções Ortodônticas , Software , EstereolitografiaRESUMO
OBJECTIVES: To characterize the phenotypes of skeletal Class III malocclusion in adult patients who underwent orthognathic surgery (OGS). MATERIALS AND METHODS: The sample consisted of 326 patients with Class III malocclusion treated with OGS (170 men and 156 women; mean age, 22.2 years). Using lateral cephalograms taken at initial visits, 13 angular variables and one ratio cephalometric variable were measured. Using three representative variables obtained from principal components analysis (SNA, SNB, and Björk sum), K-means cluster analysis was performed to classify the phenotypes. Statistical analysis was conducted to characterize the differences in the cephalometric variables among the clusters. RESULTS: Class III phenotypes were classified into nine clusters from the following four major groups: (1) retrusive maxilla group, clusters 7 and 9 (7.1% and 5.5%; severely retrusive maxilla, normal mandible, severe and moderate hyperdivergent, respectively) and cluster 6 (9.2%; retrusive maxilla, normal mandible, normodivergent); (2) relatively protrusive mandible group, cluster 2 (20.9%; normal maxilla, normal mandible, hyperdivergent); (3) protrusive mandible group, clusters 3 and 1 (11.7% and 15.3%; normal maxilla, protrusive mandible, normodivergent and hyperdivergent, respectively) and clusters 8 and 4 (15.3% and 3.7%; normal maxilla, severe protrusive mandible, normodivergent and hypodivergent, respectively); and (4) protrusive maxilla and protrusive mandible group, cluster 5 (11.4%; protrusive maxilla, severely protrusive mandible, normodivergent). Considerations for presurgical orthodontic treatment and OGS planning were proposed based on the Class III phenotypes. CONCLUSIONS: Because the anteroposterior position of the maxilla and rotation of the mandible by a patient's vertical pattern determine Class III phenotypes, these variables should be considered in diagnosis and treatment planning for patients who have skeletal Class III malocclusion.
RESUMO
INTRODUCTION: The study aimed to (1) compare the accuracy and precision of 3-dimensional (3D) printed retainers at various angulations and (2) evaluate the effect of angulation on printing time and the amount of resin consumed. METHODS: Using a stereolithography 3D printer, 60 clear retainers were printed at 5 angulations (n = 12, each): 15°, 30°, 45°, 60°, and 90°. Samples for each group were randomly printed in a batch of 6 retainers at all print angulations as print 1 and print 2 cycles. Digital images of the original and printed samples were superimposed. Discrepancies on 8 landmarks were measured by 2 independent examiners, and 0.25 mm was set as the clinically acceptable threshold to determine the accuracy of the retainers. RESULTS: Deviations ranged from 0.074 mm to 0.225 mm from the reference retainer at the cusp tips and incisal edges at all angulations, falling within the threshold of clinical acceptance. However, smooth surface measurements with deviations up to 0.480 mm were deemed clinically not acceptable. Three-dimensional printing at 15° was estimated to be the most time-efficient, whereas 3D printing at 45° was shown to be the most cost-effective setting. CONCLUSIONS: Three-dimensional printed retainers, using a stereolithography printer, were found to be accurate within 0.25 mm at all print angulations at the cusp tips and incisal edges compared with the digital reference file. Smooth facial surfaces did not meet clinical acceptability. Print angulations were shown to affect the cost and amount of resin used.
Assuntos
Contenções Ortodônticas , Estereolitografia , Humanos , Impressão TridimensionalRESUMO
ABSTRACT: The purpose of this study was to investigate the effects of early spheno-occipital synchondrosis (SOS) fusion in preadolescent patients with syndromic craniosynostosis (SC) on the craniofacial skeletal patterns. Twenty preadolescent SC patients were divided into the fused SOS (FS, nâ=â10; 8 Crouzon and 2 Apert) and not-fused SOS groups (NFS, nâ=â10; 9 Crouzon and 1 Apert). Lateral cephalograms (mean age: 9.60âyears, cervical vertebral maturation index: stage I and II) were used to investigate the skeletal sagittal (ANB) and vertical patterns (SN-GoMe), upward inclination of the anterior cranial base (ACB; SN-FH), degree of midface hypoplasia (MH, SNA), retrusive position of orbitale (SNO), and forward position of the condyle in relation to sella (saddle angle). Using the ordinal values calculated by ethnic norm (criteria: moderate, over ±1 standard deviation, severe, over ±2 standard deviation), statistical analysis was performed. The FS group showed a higher percentage of severe MH than the NFS group (70% versus 10%, Pâ<â0.05). Although the 2 groups did not differ in the distribution of ANB, SN-GoMe, saddle angle, and SN-FH (all Pâ>â0.05), the FS group showed relatively higher percentages of severe Class III (100% versus 70%), severe hyper-divergent pattern (40% versus 10%), severely forward condyle position (30% versus 0%), and moderate and severe upward anterior cranial base inclination (90% versus 50%) than the NFS group. However, the 2 groups exhibited the same distribution of moderately and severely retrusive orbitale position ([50%, 20%], Pâ>â0.05). Early SOS fusion in preadolescent SC patients might not be related to retrusive orbitale position, but to severe MH.
Assuntos
Craniossinostoses , Cefalometria , Vértebras Cervicais , Criança , Craniossinostoses/diagnóstico por imagem , Cabeça , Humanos , Base do Crânio/diagnóstico por imagemRESUMO
ABSTRACT: The purpose of this study was to investigate the type and frequency of use of treatment modalities (Tx-Mods) in patients with syndromic craniosynostosis (SC) using longitudinal follow-up data. A total of 28 patients with SC (24 Crouzon, 2 Apert, and 2 Antley-Bixler syndromes), who were treated at the Department of Orthodontics, Seoul National University Dental Hospital, Seoul, South Korea between 1998 and 2020, was included. According to the degree of midface hypoplasia (MH) at the initial visit (T1), the patients were divided into the mild-MH (78°≤SNA < 80°, n = 8), moderate-MH (76≤SNA < 78°, n = 7), and severe-MH (SNA < 76°, n = 13) groups. T1-age and Tx-Mods, including cal-varial surgery (CALS), orthopedic treatment (OPT), fixed orthodontic treatment, and midface advancement surgery in childhood (MAS-child) and adulthood (MAS-adult), were investigated. Complexity of MAS-adult was graded as follows: 0, no surgery; 1, orthognathic surgery; 2, distraction osteogenesis (DOG); 3, combination of distraction osteogenesis and orthognathic surgery. Then, statistical analysis was performed. Percentage distribution of Tx-Mods was 71.4% in CALS, 21.4% in MAS-child, 42.9% in OPT, 100% in fixed orthodontic treatment, and 89.3% in MAS-adult. 92.9% of patients underwent MAS more than once. The number of MAS increased according to the severity of MH ( P < 0.05). The complexity of MAS-adult increased as T1-age and severity of MH increased (all P < 0.05); whereas it decreased when CALS and OPT were performed (all P < 0.05). However, MAS in childhood did not guarantee the avoidance of additional MAS in adulthood ( P > 0.05). These findings may be used as basic guidelines for successful treatment planning and prognosis prediction in patients with SC.
Assuntos
Disostose Craniofacial , Craniossinostoses , Osteogênese por Distração , Humanos , Disostose Craniofacial/cirurgia , Craniossinostoses/etiologia , Craniossinostoses/cirurgia , Seguimentos , Osteogênese por Distração/efeitos adversos , Osteotomia de Le FortRESUMO
Measuring bone density (BD) is a common method of determining bone quality; however, the relationship between condylar BD and the occurrence of temporomandibular joint (TMJ) disorders has not been investigated. To address this knowledge gap, we aimed to investigate condylar BD in terms of TMJ disk displacement (TMJ DD) using computed tomography (CT) and magnetic resonance imaging (MRI). We classified TMJ MRI results according to the position of the disk: normal disk position (Normal), anterior disk displacement with reduction (ADDR), and anterior disk displacement without reduction (ADDNR). After retrospectively evaluating 86 female condyles, we determined the total, cortical, and trabecular BD in the upper-joint portion of the condyle and the whole condyle using CT data. To standardize condylar BD, we calculated the BD ratios by dividing the condylar BD by the cervical axis BD. The Kruskal-Wallis test analyzed the differences in BD measurements in the TMJ DD patient groups and showed significant between-group differences in condylar BD. The total and trabecular BD was significantly higher in ADDNR condyles than in Normal or ADDR condyles (Normalâ¯=â¯ADDR < ADDNR). However, there was no significant difference in the cortical BD among the three TMJ DD groups. The BD ratios showed a similar tendency with condylar BD. These results suggest that increased condylar BD - specifically total and trabecular BD - may be significantly associated with ADDNR condyles. Our findings will help clinicians determine the course of treatment for patients with disk-related TMJ disorders.
Assuntos
Luxações Articulares , Transtornos da Articulação Temporomandibular , Densidade Óssea , Feminino , Humanos , Luxações Articulares/patologia , Imageamento por Ressonância Magnética , Masculino , Côndilo Mandibular/diagnóstico por imagem , Côndilo Mandibular/patologia , Estudos Retrospectivos , Articulação Temporomandibular/patologia , Disco da Articulação Temporomandibular/diagnóstico por imagem , Disco da Articulação Temporomandibular/patologia , Transtornos da Articulação Temporomandibular/diagnóstico por imagem , Transtornos da Articulação Temporomandibular/patologiaRESUMO
ABSTRACT: The purpose of this study was to investigate the phenotypes and treatment modalities (Tx-Mod) in patients with Treacher-Collins syndrome (TCS) using a TCS severity index (TSI). The sample consisted of 14 Korean TCS patients treated at the Department of Orthodontics, Seoul National University Dental Hospital during 1998 to 2019. The TSI was calculated by adding the scores from the number of deformity-involved midface structures (eye, ear, zygoma) and the degree of mandibular hypoplasia (Pruzansky-Kaban type, gonial angle, Sella-Nasion-B point angle). The deformity-involved midface structure, degree of mandibular hypoplasia, oral manifestations, dental phenotypes, and Tx-Mod types were investigated using descriptive statistics. The TSI classified the subjects into 2 mild, 6 moderate, and 6 severe cases. The severity of ear and zygoma deformities, degree of condylar hypoplasia (Pruzansky-Kaban type), clockwise-rotated morphology (gonial angle) and retrusive position (Sella-Nasion-B point angle) of the mandible, and frequency of oral/craniofacial cleft, openbite, congenitally missing tooth and impacted tooth showed a tendency of increase from mild to severe TCS cases. After growth observation (78.6%), diverse combinations of Tx-Mods were applied except for functional appliance therapy. Surgical procedures for eye, ear, and zygoma reconstruction were performed on all patients (100%), whereas fixed orthodontic treatment, mandibular distraction osteogenesis, and orthognathic surgery were performed on 50% of patients. Surgical procedure for hearing improvement was the most frequent Tx-Mod (78.6%). The main desires of TCS patients were to obtain the facial esthetics in the midface and to improve hearing function. The TSI might provide a primary data for individualized diagnosis and treatment planning.
Assuntos
Disostose Mandibulofacial , Osteogênese por Distração , Humanos , Mandíbula , Disostose Mandibulofacial/cirurgia , Fenótipo , Estudos RetrospectivosRESUMO
OBJECTIVE: To investigate the phenotypes and predominant skeletodental pattern in pre-adolescent patients with Pierre-Robin sequence (PRS). METHODS: The samples consisted of 26 Korean pre-adolescent PRS patients (11 boys and 15 girls; mean age at the investigation, 9.20 years) treated at the Department of Orthodontics, Seoul National University Dental Hospital between 1998 and 2019. Dental phenotypes, oral manifestation, cephalometric variables, and associated anomalies were investigated and statistically analyzed. RESULTS: Congenitally missing teeth (CMT) were found in 34.6% of the patients (n = 9/26, 20 teeth, 2.22 teeth per patient) with 55.5% (n = 5/9) exhibiting bilaterally symmetric missing pattern. The mandibular incisors were the most common CMT (n = 11/20). Predominant skeletodental patterns included Class II relationship (57.7%), posteriorly positioned maxilla (76.9%) and mandible (92.3%), hyper-divergent pattern (92.3%), high gonial angle (65.4%), small mandibular body length to anterior cranial base ratio (65.4%), linguoversion of the maxillary incisors (76.9%), and linguoversion of the mandibular incisors (80.8%). Incomplete cleft palate (CP) of hard palate with complete CP of soft palate (61.5%) was the most frequently observed, followed by complete CP of hard and soft palate (19.2%) and CP of soft palate (19.2%) (p < 0.05). However, CP severity did not show a significant correlation with any cephalometric variables except incisor mandibular plane angle (p < 0.05). Five craniofacial and 15 extra-craniofacial anomalies were observed (53.8% patients); this implicated the need of routine screening. CONCLUSIONS: The results might provide primary data for individualized diagnosis and treatment planning for pre-adolescent PRS patients despite a single institution-based data.
RESUMO
ABSTRACT: The purpose of this study was to investigate three-dimensional facial soft tissue changes after bimaxillary orthognathic surgery (BOGS) in patients with cleft lip and palate. The samples consisted of 34 Korean young adult patients with skeletal class III malocclusion who underwent BOGS for maxillary advancement/posterior impaction and mandibular setback. They were divided into cleft-class III (C-CIII) group (nâ=â18) and noncleft-class III (NC-CIII) group (nâ=â16). Three-dimensional computed tomography images were taken 1 month before (T1) and 3 months after (T2) surgery. After 34âhard/soft tissue landmarks were automatically identified using software, the amount and direction of change in landmarks and the amount of change in 16 soft tissue variables during T1-T2 were calculated. Then, statistical analysis was performed. Compared to NC-CIII group, C-CIII group showed more posteriorly-positioned hard/soft tissue landmarks, larger alar width, alar base width and philtrum width, and more obtuse nasal tip angle at both T1 and T2 stages. C-CIII group exhibited higher soft-to-hard tissue movement ratios at the bottom of the nose (ΔSn/ΔANS, 1.08 versus 0.81) and the upper part of the upper lip (ΔPoint A'/ΔPoint A, 1.08 versus 0.91), but a lower ratio at the lower part of the upper lip (ΔLs'/ΔIs, 0.72 versus 1.01) than NC-CIII group. The number of hard-soft tissue landmarks with high correlation (>0.90) was smaller in C-CIII group than in NC-CIII group (2 versus 6). Scar tissues and abnormal muscles in the nose and upper lip might elicit different responses in the nasolabial soft tissues to BOGS between C-CIII and NC-CIII patients.
Assuntos
Fenda Labial , Fissura Palatina , Má Oclusão Classe III de Angle , Cirurgia Ortognática , Procedimentos Cirúrgicos Ortognáticos , Inteligência Artificial , Cefalometria , Fenda Labial/cirurgia , Fissura Palatina/diagnóstico por imagem , Fissura Palatina/cirurgia , Humanos , Má Oclusão Classe III de Angle/diagnóstico por imagem , Má Oclusão Classe III de Angle/cirurgia , Maxila , Osteotomia de Le FortRESUMO
The aim of this study was to evaluate the effects of the tongue and lip pressure on dentofacial morphology. The subjects comprised 194 patients with malocclusion. Anterior and posterior tongue elevation and lip pressures were evaluated using the Iowa Oral Performance Instrument (IOPI) device. The lateral cephalograms of each subject were traced and digitized to perform the analysis. Statistical analysis was used to investigate the relationship between perioral muscle force and the cephalometric variables. Anterior and posterior tongue pressure was both higher in males than in females. No sex difference in lip pressure was observed. The group with a low posterior tongue pressure showed a short ramus height, short posterior facial height, and clockwise-rotated mandible. On the other hand, lip pressure had a significant influence on maxillary incisor angulation. Skeletal pattern was not found to be significantly related with lip pressure. The anterior tongue pressure appeared as a mixed pattern of the two results. Tongue pressure was related to skeletal measurements, such as short posterior facial height, and lip pressure was related to the angulation of the anterior teeth. This study suggests that there may be differences in dentofacial morphology according to the differences in perioral muscle force.
RESUMO
OBJECTIVE: The aim of this study was to evaluate the correlation between the vertical position of maxillary first molar and vertical skeletal measurements in lateral cephalograms by using new linear measurements on the vertical axis of coordinates with calibration. METHODS: The vertical position of maxillary first molar (U6-SN), and the conventionally used variables (ConV) and the newly derived linear variables (NwLin) for vertical skeletal patterns were measured in the lateral cephalograms of 103 Korean adults with normal occlusions. Pearson correlation analyses and multiple linear regression analyses were performed with and without calibration using the anterior and posterior cranial base (ACB and PCB, respectively) lengths to identify variables related to U6-SN. RESULTS: The PCB-calibrated statistics showed the best power of explanation. ConV indicating skeletal hyperdivergency was significantly correlated with U6-SN. Six NwLin regarding the position of palatal plane were positively correlated with U6-SN. Each multiple linear regression analysis generated a two-variable model: sella and nasion to palatal plane. Among the three models, the PCBcalibrated model yielded highest adjusted R2 value, 0.880. CONCLUSIONS: U6-SN could be determined by the vertical position of the maxilla, which could then be used to plan the amount of molar intrusion and estimate its clinical stability. Cephalometric calibration on the vertical axis of coordinates by using PCB for vertical linear measurements could strengthen the analysis itself.
RESUMO
OBJECTIVE: To investigate the distribution, side involvement, phenotype, and associated anomalies of Korean patients with craniofacial clefts (CFC). METHODS: The samples consisted of 38 CFC patients, who were treated at Seoul National University Dental Hospital during 1998-2018. The Tessier cleft type, sex, side involvement, phenotype, and associated anomalies were investigated using nonparametric statistical analysis. RESULTS: The three most common types were #7 cleft, followed by #0 cleft and #14 cleft. There was no difference between the frequency of male and female. Patients with #0 cleft exhibited nasal deformity, bony defect, and missing teeth in the premaxilla, midline cleft lip, and eye problems. A patient with #3 cleft (unilateral type) exhibited bilateral cleft lip and alveolus. All patients with #4 cleft were the bilateral type, including a combination of #3 and #4 clefts, and had multiple missing teeth. A patient with #5 cleft (unilateral type) had a posterior openbite. In patients with #7 cleft, the unilateral type was more prevalent than the bilateral type (87.0% vs. 13.0%, p < 0.001). Sixteen patients showed hemifacial microsomia (HFM), Goldenhar syndrome, and unilateral cleft lip and palate (UCLP). There was a significant match in the side involvement of #7 cleft and HFM (87.5%, p < 0.01). Patients with #14 cleft had plagiocephaly, UCLP, or hyperterorbitism. A patient with #30 cleft exhibited tongue tie and missing tooth. CONCLUSIONS: Due to the diverse associated craniofacial anomalies in patients with CFC, a multidisciplinary approach involving a well-experienced cooperative team is mandatory for these patients.
RESUMO
OBJECTIVE: To investigate the dental phenotypes and treatment modalities (Tx- Mod) in Korean patients with Parry-Romberg syndrome (PRS) using longitudinal data. METHODS: The samples consisted of 10 PRS patients, who were treated and/or followed-up at Seoul National University Dental Hospital between 1998 and 2019. Using a novel PRS severity index based on the numbers of the atrophy-involved area and asymmetry-involved item, we classified them into mild (n = 3), moderate (n = 2), and severe (n = 5). Dental phenotypes, including congenitally missing tooth (Con-Missing-Tooth), microdontia, tooth with short root (Short-Root), tooth with dilacerated root, and delayed eruption/impacted tooth, were investigated along with Tx-Mod. RESULTS: The side of occurrence of all dental phenotypes showed 100% concordance with the side of PRS involvement. The most two common dental phenotypes were Con-Missing- Tooth and Short-Root (n = 29 and n = 17 in six patients). The sums of the average number of Con-Missing-Tooth and Short-Root increased from mild PRS to moderate PRS and severe PRS cases (1.0, 6.0, and 6.2). In terms of Tx- Mod, growth observation due to mild atrophy, fixed orthodontic treatment, and grafting were used for mild PRS cases. Tx-Mod for moderate PRS cases involved growth observation for surgery due to an early age at the initial visit. For severe PRS cases, diverse Tx-Mod combinations including unilateral functional appliance, fixed orthodontic treatment, growth observation, grafting, and orthognathic surgery were used. CONCLUSIONS: The novel PRS severity index may be useful to provide primary data for individualized diagnosis and treatment planning for PRS patients.