RESUMO
Emerging quantum technologies that critically require the integration of quantum emitters on photonic platforms are hindered by the control over their position, quantity, and scalability. Herein, we describe a facile strategy to deposit aqueous silica-coated quantum dots (QDs) in a template of polymethyl methacrylate (PMMA) nanoholes that leverages saturated ethanol vapor drop-casting and subsequent lift-off of the template. Ethanol vapor incorporation into water droplets during the drying process reduces the meniscus contact angle, which increases capillary forces and enhances particle confinement within the pinning contact region. Furthermore, induced Marangoni flow controls the particle transport dynamics inside the droplets, making large-scale deposition possible. Controlling the hole diameter of the template demonstrates changes in the number of QDs per hole, which is consistent with the Poissonian distribution with the best results of â¼40% single-particle yield from an â¼80% total site occupancy. This method employs a simple setup, eliminating the need for intricate optimization, yet offers the potential for deterministic patterning within complex photonic platforms.
RESUMO
Caustics occur in diverse physical systems, spanning the nano-scale in electron microscopy to astronomical-scale in gravitational lensing. As envelopes of rays, optical caustics result in sharp edges or extended networks. Caustics in structured light, characterized by complex-amplitude distributions, have innovated numerous applications including particle manipulation, high-resolution imaging techniques, and optical communication. However, these applications have encountered limitations due to a major challenge in engineering caustic fields with customizable propagation trajectories and in-plane intensity profiles. Here, we introduce the "compensation phase" via 3D-printed metasurfaces to shape caustic fields with curved trajectories in free space. The in-plane caustic patterns can be preserved or morphed from one structure to another during propagation. Large-scale fabrication of these metasurfaces is enabled by the fast-prototyping and cost-effective two-photon polymerization lithography. Our optical elements with the ultra-thin profile and sub-millimeter extension offer a compact solution to generating caustic structured light for beam shaping, high-resolution microscopy, and light-matter-interaction studies.
RESUMO
The advent of 2D ferroelectrics, characterized by their spontaneous polarization states in layer-by-layer domains without the limitation of a finite size effect, brings enormous promise for applications in integrated optoelectronic devices. Comparing with semiconductor/insulator devices, ferroelectric devices show natural advantages such as non-volatility, low energy consumption and high response speed. Several 2D ferroelectric materials have been reported, however, the device implementation particularly for optoelectronic application remains largely hypothetical. Here, the linear electro-optic effect in 2D ferroelectrics is discovered and electrically tunable 2D ferroelectric metalens is demonstrated. The linear electric-field modulation of light is verified in 2D ferroelectric CuInP2S6. The in-plane phase retardation can be continuously tuned by a transverse DC electric field, yielding an effective electro-optic coefficient rc of 20.28 pm V-1. The CuInP2S6 crystal exhibits birefringence with the fast axis oriented along its (010) plane. The 2D ferroelectric Fresnel metalens shows efficacious focusing ability with an electrical modulation efficiency of the focusing exceeding 34%. The theoretical analysis uncovers the origin of the birefringence and unveil its ultralow light absorption across a wide wavelength range in this non-excitonic system. The van der Waals ferroelectrics enable room-temperature electrical modulation of light and offer the freedom of heterogeneous integration with silicon and another material system for highly compact and tunable photonics and metaoptics.
RESUMO
Metasurfaces have recently risen to prominence in optical research, providing unique functionalities that can be used for imaging, beam forming, holography, polarimetry, and many more, while keeping device dimensions small. Despite the fact that a vast range of basic metasurface designs has already been thoroughly studied in the literature, the number of metasurface-related papers is still growing at a rapid pace, as metasurface research is now spreading to adjacent fields, including computational imaging, augmented and virtual reality, automotive, display, biosensing, nonlinear, quantum and topological optics, optical computing, and more. At the same time, the ability of metasurfaces to perform optical functions in much more compact optical systems has triggered strong and constantly growing interest from various industries that greatly benefit from the availability of miniaturized, highly functional, and efficient optical components that can be integrated in optoelectronic systems at low cost. This creates a truly unique opportunity for the field of metasurfaces to make both a scientific and an industrial impact. The goal of this Roadmap is to mark this "golden age" of metasurface research and define future directions to encourage scientists and engineers to drive research and development in the field of metasurfaces toward both scientific excellence and broad industrial adoption.
RESUMO
Flat optics consisting of nanostructures of high-refractive index materials produce lenses with thin form factors that tend to operate only at specific wavelengths. Recent attempts to achieve achromatic lenses uncover a trade-off between the numerical aperture (NA) and bandwidth, which limits performance. Here, we propose a new approach to design high-NA, broadband, and polarization-insensitive multilayer achromatic metalenses (MAMs). We combine topology optimization and full-wave simulations to inversely design MAMs and fabricate the structures in low-refractive index materials by two-photon polymerization lithography. MAMs measuring 20 µm in diameter operating in the visible range of 400 to 800 nm with 0.5 and 0.7 NA were achieved with efficiencies of up to 42%. We demonstrate broadband imaging performance of the fabricated MAM under white light and RGB narrowband illuminations. These results highlight the potential of the 3D-printed multilayer structures for realizing broadband and multifunctional meta-devices with inverse design.
RESUMO
Two-photon polymerization lithography is promising for producing three-dimensional structures with user-defined micro- and nanoscale features. Additionally, shrinkage by thermolysis can readily shorten the lattice constant of three-dimensional photonic crystals and enhance their resolution and mechanical properties; however, this technique suffers from non-uniform shrinkage owing to substrate pinning during heating. Here, we develop a simple method using poly(vinyl alcohol)-assisted uniform shrinking of three-dimensional printed structures. Microscopic three-dimensional printed objects are picked and placed onto a receiving substrate, followed by heating to induce shrinkage. We show the successful uniform heat-shrinking of three-dimensional prints with various shapes and sizes, without sacrificial support structures, and observe that the surface properties of the receiving substrate are important factors for uniform shrinking. Moreover, we print a three-dimensional mascot model that is then uniformly shrunk, producing vivid colors from colorless woodpile photonic crystals. The proposed method has significant potential for application in mechanics, optics, and photonics.
RESUMO
Structural colors in homogeneous elastomeric materials predominantly exhibit uniform color changes under applied strains. However, juxtaposing mechanochromic pixels that exhibit distinct responses to applied strain remains challenging, especially on the microscale where the demand for miscellaneous spectral information increases. Here, we present a method to engineer microscale switchable color pixels by creating localized inhomogeneous strain fields at the level of individual microlines. Trenches produced by transfer casting from 2.5D structures into elastomers exhibit a uniform structural color in the unstretched state due to interference and scattering effects, while they show different colors under an applied uniaxial strain. This programmable topographic change resulting in color variation arises from strain mismatch between layers and trench width. We utilized this effect to achieve the encryption of text strings with Morse code. The effective and facile design principle is promising for diverse optical devices based on dynamic structures and topographic changes.
RESUMO
Optical transparency is rare in terrestrial organisms, and often originates through loss of pigmentation and reduction in scattering. The coloured wings of some butterflies and moths have repeatedly evolved transparency, offering examples of how they function optically and biologically. Because pigments are primarily localized in the scales that cover a colourless wing membrane, transparency has often evolved through the complete loss of scales or radical modification of their shape. Whereas bristle-like scales have been well documented in glasswing butterflies, other scale modifications resulting in transparency remain understudied. The butterfly Phanus vitreus achieves transparency while retaining its scales and exhibiting blue/cyan transparent zones. Here, we investigate the mechanism of wing transparency in P. vitreus by light microscopy, focused ion beam milling, microspectrophotometry and optical modelling. We show that transparency is achieved via loss of pigments and vertical orientation in normal paddle-like scales. These alterations are combined with an anti-reflective nipple array on portions of the wing membrane being more exposed to light. The blueish coloration of the P. vitreus transparent regions is due to the properties of the wing membrane, and local scale nanostructures. We show that scale retention in the transparent patches might be explained by these perpendicular scales having hydrophobic properties.
Assuntos
Borboletas , Animais , Asas de Animais , Pigmentação , Microscopia Eletrônica de Varredura , Visão OcularRESUMO
Differential interference contrast (DIC) microscopy allows high-contrast, low-phototoxicity, and label-free imaging of transparent biological objects, and has been applied in the field of cellular morphology, cell segmentation, particle tracking, optical measurement and others. Commercial DIC microscopy based on Nomarski or Wollaston prism resorts to the interference of two polarized waves with a lateral differential offset (shear) and axial phase shift (bias). However, the shear generated by these prisms is limited to the rectilinear direction, unfortunately resulting in anisotropic contrast imaging. Here we propose an ultracompact metasurface-assisted isotropic DIC (i-DIC) microscopy based on a grand original pattern of radial shear interferometry, that converts the rectilinear shear into rotationally symmetric along radial direction, enabling single-shot isotropic imaging capabilities. The i-DIC presents a complementary fusion of typical meta-optics, traditional microscopes and integrated optical system, and showcases the promising and synergetic advancements in edge detection, particle motion tracking, and label-free cellular imaging.
RESUMO
The orbital angular momentum is a fundamental degree of freedom of light wavefronts, currently exploited in applications where information capacity is a key requirement, such as optical communication, super-resolution imaging and high-dimensional quantum computing. However, generating orbital angular momentum beams requires spatio-temporally coherent light sources (lasers or supercontinuum sources), because incoherent light would smear out the doughnut features of orbital angular momentum beams, forming polychromatic or obscured orbital angular momentum beams instead. Here we show generation of coloured orbital angular momentum beams using incoherent white light. Spatio-temporal coherence is achieved by miniaturizing spiral phase plates and integrating them with structural colour filters, three-dimensionally printed at the nanoscale. Our scheme can in principle generate multiple helical eigenstates and combine colour information into orbital angular momentum beams independently. These three-dimensional optical elements encoded with colour and orbital angular momentum information substantially increase the number of combinations for optical anti-counterfeiting and photonic lock-key devices in a pairwise fashion.
RESUMO
Digital camera sensors use color filters on photodiodes to achieve color selectivity. As the color filters and photosensitive silicon layers are separate elements, these sensors suffer from optical cross-talk, which sets limits to the minimum pixel size. Here, we report hybrid silicon-aluminum nanostructures in the extreme limit of zero distance between color filters and sensors. This design could essentially achieve submicrometer pixel dimensions and minimize the optical cross-talk arising from tilt illuminations. The designed hybrid silicon-aluminum nanostructure has dual functionalities. Crucially, it supports a hybrid Mie-plasmon resonance of magnetic dipole to achieve color-selective light absorption, generating electron hole pairs. Simultaneously, the silicon-aluminum interface forms a Schottky barrier for charge separation and photodetection. This design potentially replaces the traditional dye-based filters for camera sensors at ultrahigh pixel densities with advanced functionalities in sensing polarization and directionality, and UV selectivity via interband plasmons of silicon.
RESUMO
Reconfigurable metamaterials require constituent nanostructures to demonstrate switching of shapes with external stimuli. Yet, a longstanding challenge is in overcoming stiction caused by van der Waals forces in the deformed configuration, which impedes shape recovery. Here, we introduce stiff shape memory polymers. This designer material has a storage modulus of â¼5.2 GPa at room temperature and â¼90 MPa in the rubbery state at 150 °C, 1 order of magnitude higher than those in previous reports. Nanopillars with diameters of â¼400 nm and an aspect ratio as high as â¼10 were printed by two-photon lithography. Experimentally, we observe shape recovery as collapsed and touching structures overcome stiction to stand back up. We develop a theoretical model to explain the recoverability of these sub-micrometer structures. Reconfigurable structural color prints with a resolution of 21150 dots per inch and holograms are demonstrated, indicating potential applications of the stiff shape memory polymers in high-resolution reconfigurable nanophotonics.
Assuntos
Nanoestruturas , Materiais Inteligentes , Polímeros/química , Impressão , Nanoestruturas/química , FótonsRESUMO
Under white light illumination, gratings produce an angular distribution of wavelengths dependent on the diffraction order and geometric parameters. However, previous studies of gratings are limited to at least one geometric parameter (height, periodicity, orientation, angle of incidence) kept constant. Here, we vary all geometric parameters in the gratings using a versatile nanofabrication technique, two-photon polymerization lithography, to encode hidden color information through two design approaches. The first approach hides color information by decoupling the effects of grating height and periodicity under normal and oblique incidence. The second approach hides multiple sets of color information by arranging gratings in sectors around semicircular pixels. Different images are revealed with negligible crosstalk under oblique incidence and varying sample rotation angles. Our analysis shows that an angular separation of ≥10° between adjacent sectors is required to suppress crosstalk. This work has potential applications in information storage and security watermarks.
RESUMO
Exciton is a bosonic quasiparticle consisting of a pair of electron and hole, with promising potentials for optoelectronic device applications, such as exciton transistors, photodetectors and light emitting devices. However, the charge-neutral nature of excitons renders them challenging to manipulate using electronics. Here we present the generation of trions, a form of charged excitons, together with enhanced exciton resonance in monolayer WSe2. The excitation of the trion quasiparticles is achieved by the hot carrier transport from the integrated gold plasmonic nanocavity, formed by embedding monolayer WSe2 between gold nanoparticles and a gold film. The nanocavity-induced negatively charged trions provide a promising route for the manipulation of excitons, essential for the construction of all-exciton information processing circuits.
RESUMO
Laser probing remains invaluable to the semiconductor industry for isolating and diagnosing defects in silicon transistors in integrated circuits during electrical stress tests. However, continuous device miniaturization below the 20 nm technology node has crammed multiple transistors within the focal spot of the laser beam, resulting in signal crosstalk, poor beam positioning accuracy and degraded fault isolation capabilities. The challenge is analogous to focusing attention to a single speaker in a crowd despite the multiple simultaneous conversations in the background. Through algorithms introduced in this patented work, consisting of cross-correlations, clustering, and our previously developed combinational logic analysis, we achieved beam positioning accuracy to better than 10 nm, extracted electrooptic waveforms from a node of a group of transistors (~18 times beyond the optical resolution limit), and applied this to isolate and identify an actual fault on a defective device. While problems associated with probing with shorter wavelength lasers continue to be addressed, our approach enhances and enables the continued probing of ICs using sub-bandgap photon energies without hardware modification to existing technology at semiconductor technology nodes below 10 nm.
RESUMO
Phase transitions can occur in certain materials such as transition metal oxides (TMOs) and chalcogenides when there is a change in external conditions such as temperature and pressure. Along with phase transitions in these phase change materials (PCMs) come dramatic contrasts in various physical properties, which can be engineered to manipulate electrons, photons, polaritons, and phonons at the nanoscale, offering new opportunities for reconfigurable, active nanodevices. In this review, we particularly discuss phase-transition-enabled active nanotechnologies in nonvolatile electrical memory, tunable metamaterials, and metasurfaces for manipulation of both free-space photons and in-plane polaritons, and multifunctional emissivity control in the infrared (IR) spectrum. The fundamentals of PCMs are first introduced to explain the origins and principles of phase transitions. Thereafter, we discuss multiphysical nanodevices for electronic, photonic, and thermal management, attesting to the broad applications and exciting promises of PCMs. Emerging trends and valuable applications in all-optical neuromorphic devices, thermal data storage, and encryption are outlined in the end.
RESUMO
It remains a challenge to directly print arbitrary three-dimensional shapes that exhibit structural colors at the micrometer scale. Woodpile photonic crystals (WPCs) fabricated via two-photon lithography (TPL) are elementary building blocks to produce 3D geometries that generate structural colors due to their ability to exhibit either omnidirectional or anisotropic photonic stop bands. However, existing approaches produce structural colors on WPCs when illuminating from the top, requiring print resolutions beyond the limit of commercial TPL, which necessitates postprocessing techniques. Here, we devised a strategy to support high-order photonic cavity modes upon side illumination on WPCs that surprisingly generate prominent reflectance peaks in the visible spectrum. Based on that, we demonstrate one-step printing of 3D photonic structural colors without requiring postprocessing or subwavelength features. Vivid colors with reflectance peaks exhibiting a full width at half-maximum of â¼25 nm, a maximum reflectance of 50%, a gamut of â¼85% of sRGB, and large viewing angles were achieved. In addition, we also demonstrated voxel-level manipulation and control of colors in arbitrary-shaped 3D objects constituted with WPCs as unit cells, which has potential for applications in dynamic color displays, colorimetric sensing, anti-counterfeiting, and light-matter interaction platforms.
RESUMO
While structural colors are ubiquitous in nature, saturated reds are mysteriously absent. This long-standing problem of achieving Schrödinger's red demands sharp transitions from "stopband" to a high-reflectance "passband" with total suppression of higher-order resonances at blue/green wavelengths. Current approaches based on nanoantennas are insufficient to satisfy all conditions simultaneously. Here, we designed Si nanoantennas to support two partially overlapping quasi-bound-states-in-the-continuum modes with a gradient descent algorithm to achieve sharp spectral edges at red wavelengths. Meanwhile, high-order modes at blue/green wavelengths are suppressed via engineering the substrate-induced diffraction channels and the absorption of amorphous Si. This design produces possibly the most saturated and brightest reds with ~80% reflectance, exceeding the red vertex in sRGB and even the cadmium red pigment. Its nature of being sensitive to polarization and illumination angle could be potentially used for information encryption, and this proposed paradigm could be generalized to other Schrödinger's color pixels.
RESUMO
Bound-states-in-the-continuum (BIC) is an emerging concept in nanophotonics with potential impact in applications, such as hyperspectral imaging, mirror-less lasing, and nonlinear harmonic generation. As true BIC modes are non-radiative, they cannot be excited by using propagating light to investigate their optical characteristics. In this paper, for the 1st time, we map out the strong near-field localization of the true BIC resonance on arrays of silicon nanoantennas, via electron energy loss spectroscopy with a sub-1-nm electron beam. By systematically breaking the designed antenna symmetry, emissive quasi-BIC resonances become visible. This gives a unique experimental tool to determine the coherent interaction length, which we show to require at least six neighboring antenna elements. More importantly, we demonstrate that quasi-BIC resonances are able to enhance localized light emission via the Purcell effect by at least 60 times, as compared to unpatterned silicon. This work is expected to enable practical applications of designed, ultra-compact BIC antennas such as for the controlled, localized excitation of quantum emitters.