Differential Regulation of Male-Hormones-Related Enhancers Revealed by Chromatin Accessibility and Transcriptional Profiles in Pig Liver.

Surgical castration can effectively avoid boar taint and improve pork quality by removing the synthesis of androstenone in the testis, thereby reducing its deposition in adipose tissue. The expression of genes involved in testis-derived hormone metabolism was altered following surgical castration, but the upstream regulatory factors and underlying mechanism remain unclear. In this study, we systematically profiled chromatin accessibility and transcriptional dynamics in liver tissue of castrated and intact full-sibling Yorkshire pigs. First, we identified 897 differentially expressed genes and 6864 differential accessible regions (DARs) using RNA- and ATAC-seq. By integrating the RNA- and ATAC-seq results, 227 genes were identified, and a significant positive correlation was revealed between differential gene expression and the ATAC-seq signal. We constructed a transcription factor regulatory network after motif analysis of DARs and identified a candidate transcription factor (TF) SP1 that targeted the HSD3B1 gene, which was responsible for the metabolism of androstenone. Subsequently, we annotated DARs by incorporating H3K27ac ChIP-seq data, marking 2234 typical enhancers and 245 super enhancers involved in the regulation of all testis-derived hormones. Among these, four typical enhancers associated with HSD3B1 were identified. Furthermore, an in-depth investigation was conducted on the androstenone-related enhancers, and an androstenone-related mutation was identified in a newfound candidatetypical enhancer (andEN) with dual-luciferase assays. These findings provide further insights into how enhancers function as links between phenotypic and non-coding area variations. The discovery of upstream TF and enhancers of HSD3B1 contributes to understanding the regulatory networks of androstenone metabolism and provides an important foundation for improving pork quality.

Optimization of nursing interventions for postoperative mental status recovery in patients with cerebral hemorrhage.

BACKGROUND: Hypertensive cerebral hemorrhage (HCH), the most common chronic diseases, has become a topic of global public health discussions. AIM: To investigate the role of rehabilitative nursing interventions in optimizing the postoperative mental status recovery phase and to provide clinical value for future rehabilitation of patients with HCH. METHODS: This randomized controlled study included 120 patients with cerebral HCH who were contained to our neurosurgery department between May 2021-May 2023 as the participants. The participants have randomly sampled and grouped into the observation and control groups. The observation group received the rehabilitation nursing model, whereas the control group have given conventional nursing. The conscious state of the patients was assessed at 7, 14, 21, and 30 d postoperatively. After one month of care, sleep quality, anxiety, and depression were compared between the two groups. Patient and family satisfaction were assessed using a nursing care model. RESULTS: The results showed that the state of consciousness scores of the patients in both groups significantly increased (P < 0.05) after surgical treatment. From the 14th day onwards, differences in the state of consciousness scores between the two groups of patients began to appear (P < 0.05). After one month of care, the sleep quality, anxiety state, and depression state of patients were significantly better in the observation group than in the control group (P < 0.05). Satisfaction with nursing care was higher in the observation group than in the control group (P < 0.05). CONCLUSION: The rehabilitation nursing model has a more complete system compared to conventional nursing, which can effectively improve the postoperative quality of life of patients with cerebral hemorrhage and improve the efficiency of mental state recovery; however, further analysis and research are needed to provide more scientific evidence.

Construction of CoNi2S4/Co9S8@Co4S3 nanocubes derived from Ni-Co prussian blue analogues@cobalt carbonate hydroxide core-shell heterostructure for asymmetric supercapacitor.

Construction of Prussian blue analogues (PBAs) with heterostructure is beneficial to preparing PBAs derivatives with superior electrochemical performance. In this work, the core-shell nanostructured nanocubes composed of nickel hexacyanocobalt PBA (NiCo-PBA)@cobalt carbonate hydroxide (CCH) are synthesized through an in-situ epitaxial growth strategy, and the formation mechanisms of coating are carefully validated and specifically discussed. Then, the precursors are successfully transformed into hierarchical CoNi2S4/Co9S8@Co4S3 via the gas-phase vulcanization method. Benefiting from the intriguing heterostructure and multicomponent sulfides, the CoNi2S4/Co9S8@Co4S3-80 electrode exhibits a high specific capacity of 799 ± 16C/g (specific capacitance of 1595 ± 31F/g) at 1 A/g, ultra-high capacity retention of 80 % at a high current density of 20 A/g. The assembled asymmetric supercapacitor (ASC) device delivers a high energy density of 43.3 Wh kg-1 at a power density of 899 W kg-1 and exhibits superior cycling stability with the capacity retention of 88 % after 5,000 cycles. Subsequently, the fabricated all-solid-state ASC device shows an excellent energy density of 36.4 Wh kg-1 with a power density of 824 W kg-1. This work proposing rational design of combining multicomponent sulfides and core-shell heterostructure based on PBA nanocubes opens up a novel route for developing asymmetric supercapacitor electrode materials with superior performance.

Combined Transcriptomics and Metabolomics Identify Regulatory Mechanisms of Porcine Vertebral Chondrocyte Development In Vitro.

Porcine body length is closely related to meat production, growth, and reproductive performance, thus playing a key role in the profitability of the pork industry. Cartilage development is critical to longitudinal elongation of individual vertebrae. This study isolated primary porcine vertebral chondrocytes (PVCs) to clarify the complex mechanisms of elongation. We used transcriptome and target energy metabolome technologies to confirm crucial genes and metabolites in primary PVCs at different differentiation stages (0, 4, 8, and 12 days). Pairwise comparisons of the four stages identified 4566 differentially expressed genes (DEGs). Time-series gene cluster and functional analyses of these DEGs revealed four clusters related to metabolic processes, cartilage development, vascular development, and cell cycle regulation. We constructed a transcriptional regulatory network determining chondrocyte maturation. The network indicated that significantly enriched transcription factor (TF) families, including zf-C2H2, homeobox, TF_bZIP, and RHD, are important in cell cycle and differentiation processes. Further, dynamic network biomarker (DNB) analysis revealed that day 4 was the tipping point for chondrocyte development, consistent with morphological and metabolic changes. We found 24 DNB DEGs, including the TFs NFATC2 and SP7. Targeted energy metabolome analysis showed that most metabolites were elevated throughout chondrocyte development; notably, 16 differentially regulated metabolites (DRMs) were increased at three time points after cell differentiation. In conclusion, integrated metabolome and transcriptome analyses highlighted the importance of amino acid biosynthesis in chondrocyte development, with coordinated regulation of DEGs and DRMs promoting PVC differentiation via glucose oxidation. These findings reveal the regulatory mechanisms underlying PVC development and provide an important theoretical reference for improving pork production.

Adsorption and reduction of Cr(VI) by N, S co-doped porous carbon from sewage sludge and low-rank coal: Combining experiments and theoretical calculations.

Herein, a novel N, S co-doped porous carbon (S5C5-AC) for Cr(VI) removal was prepared by co-hydrothermal carbonization (HTC) of sewage sludge (SS) and low-rank coal (LC) combining with KOH modification. The results showed that S5C5-AC had excellent adsorption performance on Cr(VI), and lower pH value, higher initial concentration and longer contact time were beneficial for Cr(VI) adsorption. The adsorption kinetics and isotherms revealed that Cr(VI) adsorption by S5C5-AC was homogeneous and dominated by chemisorption. The adsorption isotherm showed that the maximum equilibrium adsorption capacity of S5C5-AC for Cr(VI) was 382.04 mg/g at 25 °C. Furthermore, the results showed that the main mechanisms for Cr(VI) removal were the pore filling, electrostatic interaction and reduction. Moreover, the electron transfer mechanism during the adsorption and reduction process was further explored at the molecular and electronic levels by density functional theory (DFT) and front orbital theory (FOT) simulations. The analysis of DFT and FOT indicated that the synergistic effect between S and N functional groups was exhibited during the Cr(VI) removal process. Considering the existence of synergistic effects between N and S functional groups during adsorption, the S and N content and form were modified collaboratively. Increasing the relative content of pyrrolic N may be the most effective pathway for improving removal performance. Besides that, S5C5-AC exhibited excellent adsorption capacity over a high coexisting ion concentration range and various actual water bodies and regeneration performance, which indicated that S5C5-AC had promising potential for the remediation of wastewater in industrial applications.

SNIP1 and PRC2 coordinate cell fates of neural progenitors during brain development.

Stem cell survival versus death is a developmentally programmed process essential for morphogenesis, sizing, and quality control of genome integrity and cell fates. Cell death is pervasive during development, but its programming is little known. Here, we report that Smad nuclear interacting protein 1 (SNIP1) promotes neural progenitor cell survival and neurogenesis and is, therefore, integral to brain development. The SNIP1-depleted brain exhibits dysplasia with robust induction of caspase 9-dependent apoptosis. Mechanistically, SNIP1 regulates target genes that promote cell survival and neurogenesis, and its activities are influenced by TGFß and NFκB signaling pathways. Further, SNIP1 facilitates the genomic occupancy of Polycomb complex PRC2 and instructs H3K27me3 turnover at target genes. Depletion of PRC2 is sufficient to reduce apoptosis and brain dysplasia and to partially restore genetic programs in the SNIP1-depleted brain in vivo. These findings suggest a loci-specific regulation of PRC2 and H3K27 marks to toggle cell survival and death in the developing brain.

Simple and Rapid Way to a Multifunctionally Conductive Hydrogel for Wearable Strain Sensors.

Conductive hydrogels have gained increasing attention in the field of wearable smart devices. However, it remains a big challenge to develop a multifunctionally conductive hydrogel in a rapid and facile way. Herein, a conductive tannic acid-iron/poly (acrylic acid) hydrogel was synthesized within 30 s at ambient temperature by the tannic acid-iron (TA@Fe3+)-mediated dynamic catalytic system. The TA@Fe3+ dynamic redox autocatalytic pair could efficiently activate the ammonium persulfate to initiate the free-radical polymerization, allowing the gelation to occur easily and rapidly. The resulting hydrogel exhibited enhanced stretchability (3560%), conductivity (33.58 S/m), and strain sensitivity (gauge factor = 2.11). When damaged, it could be self-healed through the dynamic and reversible coordination bonds between the Fe3+ and COO- groups in the hydrogel network. Interestingly, the resulting hydrogel could act as a strain sensor to monitor various human motions including the huge movement of deformations (knuckle, wrist) and subtle motions (smiling, breathing) in real time due to its enhanced self-adhesion, good conductivity, and improved strain sensitivity. Also, the obtained hydrogel exhibited efficient electromagnetic interference (EMI) shielding performance with an EMI shielding effectiveness value of 24.5 dB in the X-band (8.2-12.4 GHz). Additionally, it displayed antibacterial properties, with the help of the activity of TA.

Maternal exposure to antibiotics and risk of atopic dermatitis in childhood: a systematic review and meta-analysis.

Background: Although the association between maternal exposure to antibiotics and the risk of atopic dermatitis (AD) in childhood has been studied extensively, there still is a lack of clarity on the topic. The aim of this study was to summarize the published data and to examine if maternal exposure to antibiotics increases the risk of AD in childhood. Methods: Systematic search was performed in PubMed, Scopus, Web of Science, and Embase for all types of studies on the review subject independent of any language restrictions and published up to 28th December 2022. Data was analyzed using random-effects model and presented as pooled odds ratio (OR) with 95% confidence intervals (CI). Results: A total of 18 studies (5,354,282 mother-child pairs) were included. Maternal exposure to antibiotics was associated with an increased risk of AD in childhood (OR: 1.14, 95% CI: 1.06, 1.22, I2 = 85%, p = 0.0003). The significance of the results was not affected by the location of the study (Asia or Europe). While subgroup analysis based on exposure assessment or diagnosis of AD demonstrated a tendency of increased risk of AD, the association was not statistically significant in multiple subgroups. Segregating data based on the timing of exposure did not affect the significance of the results for studies on all trimesters. However, there was no association between antibiotic exposure in the third trimester or just before delivery and the risk of childhood AD. Conclusion: The results of this meta-analysis suggest that maternal exposure to antibiotics may lead to a modestly increased risk of AD in offspring. The evidence is limited by high interstudy heterogeneity and bias in exposure and outcome assessment. Future studies are needed to explore if the timing of exposure, the dose, the number of prescriptions, and the type of antibiotic affect this association. Systematic Review Registration: https://www.crd.york.ac.uk/prospero/, identifier CRD42023387233.

Phosphorylation of 53BP1 by ATM enforce neurodevelopmental programs in cortical organoids.

53BP1 is a well-established DNA damage repair factor recently shown to regulate gene expression and critically influence tumor suppression and neural development. For gene regulation, how 53BP1 is regulated remains unclear. Here, we showed that 53BP1-serine 25 phosphorylation by ATM is required for neural progenitor cell proliferation and neuronal differentiation in cortical organoids. 53BP1-serine 25 phosphorylation dynamics controls 53BP1 target genes for neuronal differentiation and function, cellular response to stress, and apoptosis. Beyond 53BP1, ATM is required for phosphorylation of factors in neuronal differentiation, cytoskeleton, p53 regulation, and ATM, BNDF, and WNT signaling pathways for cortical organoid differentiation. Overall, our data suggest that 53BP1 and ATM control key genetic programs required for human cortical development.

Thermal stability of Ni3ZnC0.7: As tunable additive for biomass-derived carbon sheet composites with efficient microwave absorption.

With the rapidly development of radar detection technology and the increasingly complex application environment in military field and electromagnetic pollution surrounded by electron devices, increasingly demand is needed for electromagnetic wave absorbent materials with high absorption efficiency and thermal stability. Herein, a novel Ni3ZnC0.7/Ni loaded puffed-rice derived carbon (RNZC) composites are successfully prepared by vacuum filtration of metal-organic frameworks gel precursor together with layered porous-structure carbon and followed by calcination. The Ni3ZnC0.7 particles uniformly decorate on the surface and pores of puffed-rice derived carbon. The puffed-rice derived carbon@Ni3ZnC0.7/Ni-400 mg (RNZC-4) sample displayed the best electromagnetic wave absorption (EMA) performances among the samples with different Ni3ZnC0.7 loading. The minimum reflection loss (RLmin) of the RNZC-4 composite reaches -39.9 dB at 8.6 GHz, while widest effective absorption bandwidth (EAB) of RNZC-4 for RL < -10 dB can reach 9.9 GHz (8.1-18 GHz, 1.49 mm). High porosity and large specific surface area promote the multiple reflection-absorption effect of the incident electromagnetic waves. The Ni3ZnC0.7 nanoparticles provide a large number of interfaces and dipole factors. Analysis reveals that the RNZC-4 remained general stability under 400 °C with formation of a small amount of NiO and ZnO phases. Surprisingly, at such high temperature, the absorbing properties of the material are improved rather than decreased. Obviously, the material still maintains good electromagnetic wave performance at high temperature, and implies that the absorber shows good performance stability. Therefore, our preparations exhibit potential applications under extreme conditions and a new insight for the design and application of bimetallic carbides.

Coral-like Fe-doped MoO2/C heterostructures with rich oxygen vacancies for efficient electrocatalytic N2 reduction.

Molybdenum (Mo) is one of the most important constituent elements in natural nitrogenase and theoretical calculation results show that Mo-based materials can be used as potential NRR electrocatalysts. The design of advanced catalysts with a special structure is very essential for promoting the development of electrocatalytic N2 into NH3. In this paper, Fe-doped MoO2/C heterostructured nanoparticles with rich oxygen vacancies (Vo) are designed and they exhibit highly efficient catalytic activity for artificial N2 fixation in neutral electrolytes under ambient conditions. The influence of the atomic ratio of the Fe source to the Mo source and the NaBH4 ethanol solution treatment on the structure and electrocatalytic performance are systematically investigated. The Vo-Fe-MoO2/C (1 : 50) catalyst with rich oxygen vacancies shows a satisfactory electrocatalytic N2 reduction reaction (e-NRR) activity in 0.1 M Na2SO4 with a high ammonia yield rate of 15.87 ± 0.3 µg h-1 mg-1 at -0.5 V versus the reversible hydrogen electrode (vs. the RHE) and a FE of 13.4% at -0.3 V (vs. the RHE). According to the results of DFT calculations, the active center of the electro-catalytic nitrogen reduction reaction is the molybdenum atom between the iron atom and the O vacancy. Oxygen vacancies can not only reduce the energy barrier of the RDS but also facilitate the desorption of ammonia and the first step hydrogenation of nitrogen. The doping of Fe will change the electronic state of the Mo atom in MoO2.

Novel Haplotype in the HHEX Gene Promoter Associated with Body Length in Pigs.

The screening of important candidate genes and the identification of genetic markers are important for molecular selection in the pig industry. The hematopoietically expressed homeobox (HHEX) gene plays an important role in embryonic development and organogenesis; however, the genetic variation and expression pattern of the porcine HHEX gene remains to be clarified. In this study, semiquantitative RT-PCR and immunohistochemistry results showed the specific expression of the HHEX gene in porcine cartilage tissues. A novel haplotype consisting of two SNPs rs80901185 (T > C) and rs80934526 (A > G) was detected in the promoter region of the HHEX gene. The expression of the HHEX gene was significantly higher in Yorkshire pigs (TA haplotype) than in Wuzhishan pigs (CG haplotype), and a population analysis showed that this haplotype was significantly associated with body length. An analysis subsequently revealed that the -586 to -1 bp region of the HHEX gene promoter showed the highest activity. Furthermore, we found that the activity of the TA haplotype was significantly higher than that of the CG haplotype by changing the potential binding of transcription factors YY1 and HDAC2. In summary, we conclude that the porcine HHEX gene may contribute to the breeding of pigs for body length traits.

Biomass-Derived Carbon Materials for the Electrode of Metal-Air Batteries.

Facing the challenges of energy crisis and global warming, the development of renewable energy has received more and more attention. To offset the discontinuity of renewable energy, such as wind and solar energy, it is urgent to search for an excellent performance energy storage system to match them. Metal-air batteries (typical representative: Li-air battery and Zn-air battery) have broad prospects in the field of energy storage due to their high specific capacity and environmental friendliness. The drawbacks preventing the massive application of metal-air batteries are the poor reaction kinetics and high overpotential during the charging-discharging process, which can be alleviated by the application of an electrochemical catalyst and porous cathode. Biomass, also, as a renewable resource, plays a critical role in the preparation of carbon-based catalysts and porous cathode with excellent performance for metal-air batteries due to the inherent rich heteroatom and pore structure of biomass. In this paper, we have reviewed the latest progress in the creative preparation of porous cathode for the Li-air battery and Zn-air battery from biomass and summarized the effects of various biomass sources precursors on the composition, morphology and structure-activity relationship of cathode. This review will help us understand the relevant applications of biomass carbon in the field of metal-air batteries.

Wettability and biological responses of titanium surface's biomimetic hexagonal microstructure.

In this research, an experiment was conducted on how the surface wettability and biocompatibility of staplers' titanium nails impact the healing of gastrointestinal tissue. Firstly, the bionic hexagonal structure was prepared on the surface of Ti metal by laser processing technology, and the laser textured titanium samples were observed by scanning electron microscope. Then, the liquid-solid contact angle-measuring instrument was used to characterize the wettability of titanium samples. Finally, cells were cultured on the surface of different titanium samples, CCK8 assay and qRT-PCR were carried out to investigate cell adhesion and collagen secretion on the surface of different samples. The results showed that the bionic hexagonal surface increased the surface roughness, reduced the liquid-solid contact angle, and promoted the adhesion and collagen secretion of fibroblasts. The increased wettability provided a better growth environment for cell growth. Microtexture is an important factor affecting the behavior of cells and its size parameters regulate cell gene expression, which is worthy of further study.

Impacts of springtime biomass burning in Southeast Asia on atmospheric carbonaceous components over the Beibu Gulf in China: Insights from aircraft observations.

Limited by the scarcity of in situ vertical observation data, the influences of biomass burning in Southeast Asia on major atmospheric carbonaceous compositions in downwind regions have not been thoroughly studied. In this study, aircraft observations were performed to obtain high time-resolved in situ vertical distributions of black carbon (BC) as well as carbon monoxide (CO) and carbon dioxide (CO2). Four types of profiles were revealed: Mode I (from 2000 to 3000 m, the BC, CO and CO2 concentrations were enhanced), Mode II (with increasing altitude, the BC, CO and CO2 concentrations almost decreased), Mode III (inhomogeneous vertical BC, CO and CO2 profiles with BC peaks were observed from 2500 to 3000 m) and Mode IV (the BC, CO and CO2 concentrations increased above 1500 m). Furthermore, simulations were conducted to calculate radiative forcing (RF) caused by BC and study the heating rate (HR) of BC in combination with the vertical BC profiles. A larger BC distribution in the atmosphere resulted in a sharp RF change from negative to positive values, imposing a nonnegligible influence on the atmospheric temperature profile, with maximum HR values ranging from 0.4 to 5.8 K/day. The values of the absorption Ångström exponent (AAE) were 1.46 ± 0.11 and 1.48 ± 0.17 at altitudes from 1000 to 2000 and 2000-3000 m, respectively. The average BC light absorption coefficient at the 370 nm wavelength (α BC (370)) accounted for 50.3 %-76.8 % of the α (370), while the brown carbon (BrC) light absorption coefficient at the 370 nm wavelength (α BrC (370)) contributed 23.2 %-49.7 % to the α (370) at altitudes of 1000-2000 m. At altitudes of 2000-3000 m, α BC (370) and α BrC (370) contributed 43.8 %-88.2 % and 11.8 %-56.2 % to the α (370), respectively. These findings show that calculations that consider the surface BC concentration but ignore the vertical BC distribution could result in massive uncertainties in estimating the RF and HR caused by BC. This study helped achieve a deeper understanding of the influences of biomass burning over the region of Southeast Asia on the profiles of atmospheric carbonaceous compositions and atmospheric BC absorption and its warming effect.

Co-hydrothermal carbonization of sewage sludge and coal slime for clean solid fuel production: a comprehensive assessment of hydrochar fuel characteristics and combustion behavior.

The fuel characteristics and combustion behavior of the hydrochar obtained from the co-hydrothermal carbonization (co-HTC) of sewage sludge (SS) and coal slime (CS) were investigated. The results showed that a synergistic effect existed during the co-HTC process of SS and CS, which could make the mass yield, high heating value, carbon retention rate, energy recovery efficiency, fuel ratio, and energy balance of the hydrochar increase by 1.87-6.52%, 4.04-17.54%, 7.52-16.80%, 4.20-19.59%, 7.58-25.45%, and 35.26-40.08%, respectively. Furthermore, thermogravimetric and derivative thermogravimetry analysis indicated that the weight loss of co-hydrochar was significantly increased with increasing of CS ratio, and it was 38.39%, 48.14%, and 58.08% when the CS ratio was 25%, 50%, and 75% respectively. Adding CS during HTC could significantly improve the combustion performance of the hydrochar. Moreover, SS and CS were efficiently converted into solid fuels with better combustion performance and reactivity.

[Predictive Value of Acute Phase Proteins on the Prognosis of Patients with Acute Myeloid Leukemia].

OBJECTIVE: To analyze the predictive value of acute phase proteins (APPs) on the prognosis of patients with acute myeloid leukemia (AML). METHODS: 293 AML patients who met the study requirements from January 2015 to April 2021 were collected, their clinical characteristics and pre-treatment APPs levels ï¼»including albumin (ALB), fibrinogen (FIB), C-reactive protein (CRP), Ferritin (FER)ï¼½ were followed up and investigated. Pearson correlation coefficient was used to analyze the correlation between APPs. Logistic regression was used to analyze the risk factors for mortality in AML patients. ROC curve was used to analyze the predictive value of APP for mortality in AML patients, and Kaplan-Meier survival analysis was used to compare the effect of APPs on complete remission (CR) rate, overall survival (OS), disease-free survival (DFS), and progression-free survival rate (PFS) of AML patients. RESULTS: Pearson correlation analysis showed that there were negative correlations between ALB and CRP (r=-0.134, P=0002), as well as ALB and FER (r=-0.148, P=0.001). There were correlations between FER and CRP (r=0361, P＜0.001), as well as FER and FIB (r=0.293, P＜0.001). Logistic regression analysis showed that advanced age (>50 years) (OR=1.87, 95% CI=1.25-2.15, P＜0.001), relapse after treatment (OR=2.11, 95% CI=111-3.18, P=0.003), FLT3-ITD mutation (OR=2.59, 95% CI=1.10-4.12, P＜0.001), CRP≥524 mg/L (OR=1.21, 95% CI=1.02-2.14, P=0.024), CFA (CFA=CRP*FIB/ ALB)≥3 (OR=2.41, 95% CI=1.65-6.47, P＜0.001), and FER≥1145.58 mg/ml (OR=1.67, 95% CI=1.15-3.75, P＜0.001) were the risk factors for the survival of AML patients. ROC curve analysis showed that FER (AUC=0.752, 95% CI=0.681-0823, P＜0.001, the best cut-off value=1220.56 mg/ml) and CFA (AUC=0.804, 95% CI=0.741-0.868, P＜0.001, the best cut-off value=3.00) had higher predictive value for the survival of AML patients. The remission rate, PFS, DFS, and OS in the low CFA group (CFA≤3) were significantly higher than those in the high CFA group (CFA＞3), and the overall mortality rate was lower than that in the high CFA group; the remission rate, PFS, DFS, and OS in the low FER group (FER≤1220.56 mg/ml) were significantly higher than those in the high FER group (FER＞1220.56 mg/ml), while the overall mortality rate was lower than that in the high FER group, and the difference is statistically significant. CONCLUSION: The CFA value and FER level before treatment in AML patients can independently predict the prognosis of patients, and high levels of CFA and FER are associated with poor prognosis of AML patients.

[Aerobic Granulation Stability and Microbial Diversity of Filamentous Bulking Sludge].

Filamentous bacteria, as one of the common bacteria types in wastewater biological treatment, are considered to be the main factor to induce sludge bulking. However, because of its special filamentous shape, it plays a crucial role in the formation of sludge particles. Taking filamentous bulking sludge as the research object, the effect of filamentous bacteria on the sludge granulation process and maintaining the stability of sludge granules was studied, and the microbial diversity of the sludge system was analyzed. Filamentous bulking sludge (SVI=241.56 mL·g-1) and flocculated sludge (SVI=64.22 mL·g-1) were respectively inoculated to carry out granulation culture. The results showed that the time of particle appearance of bulking sludge and flocculated sludge was 20 days and 40 days, respectively; the mature particle sizes were 650 µm and 700 µm, respectively; and the granulation time of bulking sludge was only half that of flocculated sludge. After adding the anoxic zone, the granules were broken to differing degrees, but the SV30/SV5 value of mature granules recovered to 1 after short-term fluctuation, and the stability of the mature granules was stronger. The analysis of microbial community structure showed that the relative abundance of norank_o__Saccharimonadales, unclassified_o__Saccharimonadales, and unclassified_f__Saccharimonadaceae increased from 0.05%, 0.01%, and 0.01% to 4.09%, 3.15%, and 1.12%. The existence and accumulations of these hydrophobic bacteria were important for rapid granulation. The removal rates of COD, NH4+-N, and TN were 94%, 99%, and 35% and 92%, 97%, and 30%, respectively, in SBR1 of bulking sludge and SBR2 of flocculated sludge, and the removal rates of TP were 60% and 30%, respectively.

Significant contribution of secondary particulate matter to recurrent air pollution: Evidence from in situ observation in the most polluted city of Fen-Wei Plain of China.

Particulate matter (PM) pollution in high emission regions will affect air quality, human health and climate change on both local and regional scales, and thus attract worldwide attention. In this study, a comprehensive study on PM2.5 and its chemical composition were performed in Yuncheng (the most polluted city of Fen-Wei Plain of China) from November 28, 2020 to January 24, 2021. The average concentration of PM2.5 was 87.8 ± 52.0 µg/m3, which were apparently lower than those observed during the same periods of past five years, attributable to the clean air action plan implemented in this region. NO3- and organic carbon (OC) were the dominant particulate components, which on average contributed 22.6% and 16.5% to PM2.5, respectively. The fractions of NO3-, NH4+, OC and trace metals increased while those of crustal materials and elemental carbon decreased with the degradation of PM2.5 pollution. Six types of PM2.5 sources were identified by the PMF model, including secondary inorganic aerosol (35.3%), coal combustion (28.7%), vehicular emission (20.7%), electroplating industry (8.6%), smelt industry (3.9%) and dust (2.8%). Locations of each identified source were pinpointed based on conditional probability function, potential source contribution function and concentration weighted trajectory, which showed that the geographical distribution of the sources of PM2.5 roughly agreed with the areas of high emission. Overall, this study provides valuable information on atmospheric pollution and deems beneficial for policymakers to take informed action to sustainably improve air quality in highly polluted region.

Platelet phagocytosis by leukocytes in a patient with cerebral hemorrhage and thrombocytopenia caused by gram-negative bacterial infection.

Bacteria-induced thrombocytopenia is a common clinical disease that is often ignored by clinical and scientific research. Thus, exploring the mechanism and principle of bacteria-induced thrombocytopenia could facilitate the development of new diagnostic, preventative, and treatment modalities for thrombocytopenia. This case report describes a case of platelet phagocytosis by neutrophils and monocytes in a patient with cerebral hemorrhage and thrombocytopenia caused by gram-negative bacterial infection. After the infection was eradicated, platelet phagocytosis was alleviated, and his platelet count normalized. Cellular immunity may be an important cause of bacteria-induced thrombocytopenia in patients with cerebral hemorrhage.