Effects of sodium chloride substitutes on physicochemical properties of salted beef.

In this study, beef was marinated with different low-sodium salt substitutes and heated and aged by employing superheated steam roasting and traditional roasting to investigate the effects of the various substitutes on the physicochemical properties, texture profile, sensory properties, volatile compounds, microstructural characteristics, and safety of cured and aged beef. Twenty kilograms of beef were arbitrarily divided into five treatments and pickled with different low-sodium salt substitutes. The results revealed no significant differences in saltiness, physicochemical characteristics, texture profile, or volatile compounds between the T2 and T3 and T1 (100% NaCl, T1; 75% KCl + 25% NaCl, T2; 50% KCl + 50% NaCl, T3) samples. Furthermore, the T4 and T5 (50% NaCl + 25% KCl + 20% MgCl2 + 5% CaCl2, T4; 100% yeast extract, T5) samples had lower saltiness than the T1 sample. The plasmolysis percentage and osmotic pressure of the T2 and T3 samples were lower than those of the T1 sample. Therefore, reducing sodium by substituting NaCl with 50% KCl or 75% KCl maintained an acceptable sensory and safety profile for beef consumption.

Identification and expression pattern analysis of RcACA gene family in castor under abiotic stresses / 生物工程学报

Auto-inhibited Ca2+-ATPase (ACA) is one of the Ca2+-ATPase subfamilies that plays an important role in maintaining Ca2+ concentration balance in plant cells. To explore the function and gene expression pattern of the RcACA gene family in castor, bioinformatics analysis was used to identify the members of the RcACA gene family in castor. The basic physical and chemical properties, subcellular location, protein secondary and tertiary structure, conserved domain, conserved motif, gene structure, chromosome location and collinear relationship, as well as the evolutionary characteristics and promoter cis-acting elements were predicted and analyzed. The expression pattern of the RcACA gene under abiotic stress was analyzed by expression (fragments per kilobase of exon model per million mapped fragments, FPKM) in castor transcriptome data. The results showed that 8 RcACA gene family members were identified in castor, acidic proteins located in the plasma membrane. In the secondary structure of all proteins, the α-helix and random coil is more; the RcACA genes were clustered into three categories, and the design of the genes in the same category was similar to the conserved motif. Both of them had four typical domains, RcACA3-RcACA8 had a Ca2+-ATPase N-terminal autoinhibitory domain. The RcACA gene is mostly located on the long arm of the chromosome and has 2 pairs of collinear relationships. There are more light response elements but fewer hormone-induced elements located upstream of the RcACA coding region. Interspecific clustering showed that the evolution of ACA genes among species was conservative. Tissue expression pattern analysis showed that RcACA genes showed apparent tissue expression specificity, and most of the genes showed the highest expression level in male flowers. Expression analysis under abiotic stress showed that RcACA2-RcACA8 were up-regulated under high salt and drought stress, and RcACA1 was up-regulated at 0-24 h under low-temperature stress, indicating that RcACA genes positively responded to abiotic stresses. The above results provide a theoretical basis for exploring the role of the RcACA gene in castor growth, development and stress response.

Electrochemical determination of hantavirus using gold nanoparticle-modified graphene as an electrode material and Cu-based metal-organic framework assisted signal generation.

An electrochemical biosensor was prepared for nucleic acid-based hantavirus detection using a Cu-based metal-organic framework (CuMOF) as a signal tag. The CuMOF was synthesized by the solvothermal method and then covalently bonded with signal DNA (sDNA) probes. The Au nanoparticles and reduced graphene oxide composite were deposited on the electrode surface by electroreduction as support substrate and was then functionalized with capture DNA (cDNA) probes by self-assembly. Through the complementary base pairing, the target DNA (tDNA) fragment of hantavirus hybridized with the cDNA and the sDNA in a sandwich-type format. The tDNA was detected according to the current signal of the CuMOF catalyzed reaction using o-phenylenediamine as redox substrate. The peak current of the biosensor at - 0.55 V increased linearly in proportion to the logarithmic value of the tDNA concentration from 10-15 to 10-9 mol/L, with a detection limit of 0.74 × 10-15 mol/L. Moreover, the proposed biosensor was successfully applied to detect hantavirus and was able to distinguish hantavirus from other arboviruses.

A new room temperature gas sensor based on pigment-sensitized TiO2 thin film for amines determination.

A new room temperature gas sensor was fabricated with pigment-sensitized TiO2 thin film as the sensing layer. Four natural pigments were extracted from spinach (Spinacia oleracea), red radish (Raphanus sativus L), winter jasmine (Jasminum nudiflorum), and black rice (Oryza sativa L. indica) by ethanol. Natural pigment-sensitized TiO2 sensor was prepared by immersing porous TiO2 films in an ethanol solution containing a natural pigment for 24h. The hybrid organic-inorganic formed films here were firstly exposed to atmospheres containing methylamine vapours with concentrations over the range 2-10 ppm at room temperature. The films sensitized by the pigments from black-rice showed an excellent gas-sensitivity to methylamine among the four natural pigments sensitized films due to the anthocyanins. The relative change resistance, S, of the films increased almost linearly with increasing concentrations of methylamine (r=0.931). At last, the black rice pigment sensitized TiO2 thin film was used to determine the biogenic amines generated by pork during storage. The developed films had good sensitivity to analogous gases such as putrscine, and cadaverine that will increase during storage.

Rapid detecting total acid content and classifying different types of vinegar based on near infrared spectroscopy and least-squares support vector machine.

More than 3.2 million litres of vinegar is consumed every day in China. There are many types of vinegar in China. How to control the quality of vinegar is problem. Near infrared spectroscopy (NIR) transmission technique was applied to achieve this purpose. Ninety-five vinegar samples from 14 origins covering 11 provinces in China were collected. They were classified into mature vinegar, aromatic vinegar, rice vinegar, fruit vinegar, and white vinegar. Fruit vinegar and white vinegar were separated from the other traditional categories in the two-dimension principal component space of NIR after principle component analysis (PCA). Least-squares support vector machine (LS-SVM) as the pattern recognition was firstly applied to identify mature vinegar, aromatic vinegar, rice vinegar in this study. The top two principal components (PCs) were extracted as the input of LS-SVM classifiers by principal component analysis (PCA). The best experimental results were obtained using the radial basis function (RBF) LS-SVM classifier with σ=0.8. The accuracies of identification were more than 85% for three traditional vinegar categories. Compared with the back propagation artificial neural network (BP-ANN) approach, LS-SVM algorithm showed its excellent generalisation for identification results. As total acid content (TAC) is highly connecting with the quality of vinegar, NIR was used to prediction the TAC of samples. LS-SVM was applied to building the TAC prediction model based on spectral transmission rate. Compared with partial least-square (PLS) model, LS-SVM model gave better precision and accuracy in predicting TAC. The determination coefficient for prediction (R(p)) of the LS-SVM model was 0.919 and root mean square error for prediction (RMSEP) was 0.3226. This work demonstrated that near infrared spectroscopy technique coupled with LS-SVM could be used as a quality control method for vinegar.

Comparision of two menthods on detecting broken bronchus of pneumothorax by forgarty catheter / 中国医师杂志

Objective To evaluate efficacy and safety of two methods for gas-filled and liquid-filled balloon of Swan-Ganz catheter to locate the bronchus of pulmonary air leakage. Methods All of 38 cases with pneumothorax were randomly divided into two groups. Group A : the bronchus of pulmonary air leakage were detected by injecting gas into balloon of Swan-Ganz catheter. Group B: the bronchus of pulmonary air leakage were detected by injecting physiological saline into balloon of Swan-Ganz catheter. Results The locating success rate in Group A was 89. 5% (17/19) and Group B was 94. 7% (18/19) ( P＞0. 05). The mean time of locating in Group A was (13. 3 ±4. 1) min and Group B was (9. 6 ±3. 2) min( P ＜0. 05).In Group A, the dislocation rate was 47.4% and adjacent bronchial compression rate was 68.4% , and was respectively higher than Group B 21. 1% and 26. 3% ( P ＜ 0. 05). Patients in both groups were well tolerated without any obvious adverse effects. Conclusion It is a more simple, quicker, the same safe and effective to locate the broken bronchus of pneumothorax by injecting physiological saline into balloon of Swan-Ganz catheter.