Stacking Faults Enabled Second Harmonic Generation in Centrosymmetric van der Waals RhI3.

Second harmonic generation (SHG) in van der Waals (vdW) materials has garnered significant attention due to its potential for integrated nonlinear optical and optoelectronic applications. Stacking faults in vdW materials are a typical kind of planar defect that introduces a degree of freedom to modulate the crystal symmetry and resultant SHG response. However, the physical origin and tunability of stacking-fault-governed SHG in vdW materials remain unclear. Here, taking the intrinsically centrosymmetric vdW RhI3 as an example, we theoretically reveal the origin of stacking-fault-governed SHG response, where the SHG response comes from the energetically favorable AC̅ stacking fault of which the electrical transitions along the high-symmetry paths Γ-M and Γ-K in the Brillion zone play the dominant role at 810 nm. Such a stacking-fault-governed SHG response is further confirmed via structural characterizations and SHG measurements. Furthermore, by applying hydrostatic pressure on RhI3, the correlation between structural evolution and SHG response is revealed with SHG enhancement up to 6.9 times, where the decreased electronic transition energies and higher momentum matrix elements due to the stronger interlayer interactions upon compression magnify the SHG susceptibility. This study develops a promising foundation for nonlinear nano-optics applications through the strategic design of stacking faults.

Realizing long range π-conjugation in phenanthrene and phenanthrene-based molecular crystals for anomalous piezoluminescence.

Unlike the known aggregation-caused quenching (ACQ) that the enhancement of π-π interactions in rigid organic molecules usually decreases the luminescent emission, here we show that an intermolecular "head-to-head" π-π interaction in the phenanthrene crystal, forming the so-called "transannular effect", could result in a higher degree of electron delocalization and thus photoluminescent emission enhancement. Such a transannular effect is molecular configuration and stacking dependent, which is absent in the isomers of phenanthrene but can be realized again in the designed phenanthrene-based cocrystals. The transannular effect becomes more significant upon compression and causes anomalous piezoluminescent enhancement in the crystals. Our findings thus provide new insights into the effects of π-π interactions on luminescence emission and also offer new pathways for designing efficient aggregation-induced emission (AIE) materials to advance their applications.

Enhancement of short/medium-range order and thermal conductivity in ultrahard sp3 amorphous carbon by C70 precursor.

As an advanced amorphous material, sp3 amorphous carbon exhibits exceptional mechanical, thermal and optical properties, but it cannot be synthesized by using traditional processes such as fast cooling liquid carbon and an efficient strategy to tune its structure and properties is thus lacking. Here we show that the structures and physical properties of sp3 amorphous carbon can be modified by changing the concentration of carbon pentagons and hexagons in the fullerene precursor from the topological transition point of view. A highly transparent, nearly pure sp3-hybridized bulk amorphous carbon, which inherits more hexagonal-diamond structural feature, was synthesized from C70 at high pressure and high temperature. This amorphous carbon shows more hexagonal-diamond-like clusters, stronger short/medium-range structural order, and significantly enhanced thermal conductivity (36.3 ± 2.2 W m-1 K-1) and higher hardness (109.8 ± 5.6 GPa) compared to that synthesized from C60. Our work thus provides a valid strategy to modify the microstructure of amorphous solids for desirable properties.

Identification of essential genes and immune cell infiltration in rheumatoid arthritis by bioinformatics analysis.

Rheumatoid arthritis (RA) is a common autoimmune disease that can lead to severe joint damage and disability. And early diagnosis and treatment of RA can avert or substantially slow the progression of joint damage in up to 90% of patients, thereby preventing irreversible disability. Previous research indicated that 50% of the risk for the development of RA is attributable to genetic factors, but the pathogenesis is not well understood. Thus, it is urgent to identify biomarkers to arrest RA before joints are irreversibly damaged. Here, we first use the Robust Rank Aggregation method (RRA) to identify the differentially expressed genes (DEGs) between RA and normal samples by integrating four public RA patients' mRNA expression data. Subsequently, these DEGs were used as the input for the weighted gene co-expression network analysis (WGCNA) approach to identify RA-related modules. The function enrichment analysis suggested that the RA-related modules were significantly enriched in immune-related actions. Then the hub genes were defined as the candidate genes. Our analysis showed that the expression levels of candidate genes were significantly associated with the RA immune microenvironment. And the results indicated that the expression of the candidate genes can use as predictors for RA. We hope that our method can provide a more convenient approach for the early diagnosis of RA.

Doping of charge-transfer molecules in cocrystals for the design of materials with novel piezo-activated luminescence.

A novel piezo-activated luminescent material with wide range modulation of the luminescence wavelength and a giant intensity enhancement upon compression was prepared using a strategy of molecular doping. The doping of THT molecules into TCNB-perylene cocrystals results in the formation of a weak but pressure-enhanced emission center in the material at ambient pressure. Upon compression, the emissive band from the undoped component TCNB-perylene undergoes a normal red shift and emission quenching, while the weak emission center shows an anomalous blue shift from 615 nm to 574 nm and a giant luminescence enhancement up to 16 GPa. Further theoretical calculations show that doping by THT could modify intermolecular interactions, promote molecular deformation, and importantly, inject electrons into the host TCNB-perylene upon compression, which contributes to the novel piezochromic luminescence behavior. Based on this finding, we further propose a universal approach to design and regulate the piezo-activated luminescence of materials by using other similar dopants.

Pressure-Dependent Structural and Band Gap Tuning of Semiconductor Copper(I) Thiocyanate (CuSCN).

Copper(I) thiocyanate (CuSCN) is a p-type semiconductor with exceptional properties for optoelectronic devices such as solar cells, thin-film transistors , organic light-emitting diodes, etc. Understanding the structure-optical property relationships in CuSCN is critical for its optoelectronic applications. Herein, high-pressure techniques combined with theoretical calculations are used to thoroughly investigate the structural and optical changes of CuSCN upon compression. Under high pressure, CuSCN exhibits a progressive decrease of the band gap with different rates, which is relevant to the ß to α phase transition in CuSCN and the subsequent amorphization through polymerization. UV-vis spectra measurements reveal a reduction in band gap from 3.4 to 1.3 eV upon decompression to ambient conditions. Such transitions could be attributed to the pressure-induced rotation of CuNS3 tetrahedron and bond length shrinkage. The severe distortion of the polyhedral units prompts breakdown of the structure and thus the amorphization, which is quenchable to ambient conditions. Our study demonstrates that high pressure can be utilized to adjust the structure and optical characteristics of CuSCN compound, potentially extending the material's uses in optoelectronic devices.

Anomalous pressure-responsive emission enhancement of FCO-CzS due to molecular configuration and electronic structure changes.

Studying the stimuli-responsive properties of luminescent materials is important for their applications, while the luminescent materials studied up to now usually exhibit emission quenching and red shift in photoluminescence (PL) energy upon compression. Designing luminescent material with abnormal pressure responses remains challenging. Here, we report the discovery of abnormal luminescent properties of FCO-CzS upon compression. A theoretical study on the excited state decay process has been carried out for FCO-CzS at high pressure by hybrid quantum mechanics/molecular mechanics (QM/MM). A significant emission enhancement and blue shift are observed as pressure increases up to 20 GPa. This is opposite to the pressure response behaviours reported for other luminescent materials. It is further revealed that both the unique molecular configuration and the electronic structure change contribute to the anomalous pressure-responsive emission of FCO-CzS, which reduces the non-radiative rate and increases the radiative rate, respectively. Our study provides a strategy for the design of luminescent materials with desired pressure responses.

Ultrahard bulk amorphous carbon from collapsed fullerene.

Amorphous materials inherit short- and medium-range order from the corresponding crystal and thus preserve some of its properties while still exhibiting novel properties1,2. Due to its important applications in technology, amorphous carbon with sp2 or mixed sp2-sp3 hybridization has been explored and prepared3,4, but synthesis of bulk amorphous carbon with sp3 concentration close to 100% remains a challenge. Such materials inherit the short-/medium-range order of diamond and should also inherit its superior properties5. Here, we successfully synthesized millimetre-sized samples-with volumes 103-104 times as large as produced in earlier studies-of transparent, nearly pure sp3 amorphous carbon by heating fullerenes at pressures close to the cage collapse boundary. The material synthesized consists of many randomly oriented clusters with diamond-like short-/medium-range order and possesses the highest hardness (101.9 ± 2.3 GPa), elastic modulus (1,182 ± 40 GPa) and thermal conductivity (26.0 ± 1.3 W m-1 K-1) observed in any known amorphous material. It also exhibits optical bandgaps tunable from 1.85 eV to 2.79 eV. These discoveries contribute to our knowledge about advanced amorphous materials and the synthesis of bulk amorphous materials by high-pressure and high-temperature techniques and may enable new applications for amorphous solids.

Molecular insertion regulates the donor-acceptor interactions in cocrystals for the design of piezochromic luminescent materials.

Developing a universal strategy to design piezochromic luminescent materials with desirable properties remains challenging. Here, we report that insertion of a non-emissive molecule into a donor (perylene) and acceptor (1,2,4,5-tetracyanobezene) binary cocrystal can realize fine manipulation of intermolecular interactions between perylene and 1,2,4,5-tetracyanobezene (TCNB) for desirable piezochromic luminescent properties. A continuous pressure-induced emission enhancement up to 3 GPa and a blue shift from 655 to 619 nm have been observed in perylene-TCNB cocrystals upon THF insertion, in contrast to the red-shifted and quenched emission observed when compressing perylene-TCNB cocrystals and other cocrystals reported earlier. By combining experiment with theory, it is further revealed that the inserted non-emissive THF forms blue-shifting hydrogen bonds with neighboring TCNB molecules and promote a conformation change of perylene molecules upon compression, causing the blue-shifted and enhanced emission. This strategy remains valid when inserting other molecules as non-emissive component into perylene-TCNB cocrystals for abnormal piezochromic luminescent behaviors.

SERS Selective Enhancement on Monolayer MoS2 Enabled by a Pressure-Induced Shift from Resonance to Charge Transfer.

As a newly emerging approach for surface-enhanced Raman spectroscopy (SERS), pressure-induced SERS (PI-SERS) has been attracting increasing interest for its applications in Raman signal enhancement at extreme conditions. However, how to efficiently realize the PI-SERS enhancement and elucidate the corresponding mechanism remain open questions. Herein, we demonstrate the PI-SERS enhancement up to 8.04 GPa using monolayer molybdenum disulfide (ML-MoS2) as a SERS substrate and three organic molecules with similar energy levels but different symmetries as probes. The combined theory and experiment results show that a pressure-induced increase in the Fermi level of the ML-MoS2 substrate and a decrease in the highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy gap of probe molecules lead to a transition from the multiple resonance-related SERS enhancement to charge transfer (CT)-dominated PI-SERS selective enhancement, depending on the incident laser energy and the pressure applied. Such PI-SERS selective enhancement has been discussed in the framework of CT-induced strengthening of electron-phonon coupling, as well as a possible match of the structural symmetries between probe molecules and the substrate. This study provides deep insights into our understanding of PI-SERS enhancement, and the revealed mechanism can be extended to other molecules for SERS at extreme conditions.

Novel All-Nitrogen Molecular Crystals of Aromatic N10.

Nitrogen has unique bonding ability to form single, double, and triple bonds, similar to that of carbon. However, a molecular crystal formed by an aromatic polynitrogen similar to a carbon system has not been found yet. Herein, a new form of stable all-nitrogen molecular crystals consisting of only bispentazole N10 molecules with exceedingly high energy density is predicted. The crystal structures and the conformation of N10 molecules are strongly correlated, both depending on the applied external pressure. These molecular crystals can be recovered upon the release of the pressure. The first-principles molecular dynamics simulations reveal that these all-nitrogen materials decompose at temperatures much higher than room temperature. The decompositions always start from breaking off N2 molecules from the nitrogen ring and can release a large amount of energy. These new polynitrogens are aromatic and are more stable than all the other polynitrogen crystals reported previously, providing a new green strategy to get all-nitrogen, nonpolluting high energy density materials without introducing any metal or other guest stabilizer.

Pressure tuned photoluminescence and band gap in two-dimensional layered g-C3N4: the effect of interlayer interactions.

We show that the photoluminescence (PL) emission color of few layered g-C3N4 (FL-CN) can be tuned from blue to yellow by applying pressure. FL-CN also exhibits an anomalous PL enhancement and obvious change in the light absorption at very low pressure. Further studies reveal that the increase of pressure-induced interlayer interactions affects the charge separation of photo-induced electrons and holes and thus leads to PL enhancement. An obvious decrease in interlayer compressibility probably due to interlayer stacking transition in FL-CN has been observed at above 3 GPa, which becomes less compressible than that of graphite, accompanied by obvious PL intensity weakening and emission band broadening. The results suggest that interlayer interactions may play dominant roles in the optical properties of FL-CN, shedding new insights into our understanding on PL engineering in g-C3N4.

Negative Volume Compressibility in Sc3N@C80-Cubane Cocrystal with Charge Transfer.

According to the laws of thermodynamics, materials normally exhibit contraction or expansion along the directions of the applied pressure or tension. Here, we show that a man-made cocrystal of a metallofullerene and highly energetic cubane, with strained sp3 bonding, may exhibit an anomalous negative volume compressibility. In this cocrystal, the freely rotating fullerene Sc3N@C80 acts as a structural building block while static cubane molecules fill the lattice interstitial sites. Under high pressure, Sc3N@C80 keeps stable and preserves the crystalline framework of the materials, while the cubane undergoes a progressive configurational transformation above 6.5 GPa, probably promoted by charge transfer from fullerene to cubane. A further configurational change of the cubane into a low-density configuration at higher pressure results in an anomalous pressure-driven lattice expansion of the cocrystal (∼1.8% volume expansion). Such unusual negative compressibility has previously only been predicted by theory and suggested to appear in mechanical metamaterials.

Decompression-Induced Diamond Formation from Graphite Sheared under Pressure.

Graphite is known to transform into diamond under dynamic compression or under combined high pressure and high temperature, either by a concerted mechanism or by a nucleation mechanism. However, these mechanisms fail to explain the recently reported discovery of diamond formation during ambient temperature compression combined with shear stress. Here we report a new transition pathway for graphite to diamond under compression combined with shear, based on results from both theoretical simulations and advanced experiments. In contrast to the known model for thermally activated diamond formation under pressure, the shear-induced diamond formation takes place during the decompression process via structural transitions. At a high pressure with large shear, graphite transforms into ultrastrong sp^{3} phases whose structures depend on the degree of shear stress. These metastable sp^{3} phases transform into either diamond or graphite upon decompression. Our results explain several recent experimental observations of low-temperature diamond formation. They also emphasize the importance of shear stress for diamond formation, providing new insight into the graphite-diamond transformation mechanism.

Pressure-induced SERS enhancement in a MoS2/Au/R6G system by a two-step charge transfer process.

Pressure-induced surface-enhanced Raman spectroscopy (PI-SERS) represents a new frontier in the research field of SERS. However, relatively few studies have focused on PI-SERS due to many difficulties, such as easy aggregation of nanoparticles, and difficulty in understanding the interaction mechanisms between probe molecules and the SERS substrate at high pressure. Here we developed an efficient semiconductor-metal SERS substrate (MoS2/Au) to study PI-SERS. Different from the previously reported monotonous decrease in Raman intensities upon compression, an anomalous Raman enhancement of R6G molecules adsorbed on the MoS2/Au substrate was observed up to 2.39 GPa, at which the degree of charge transfer (ρCT) between the R6G molecules and the MoS2/Au substrate reaches a maximum. By comparison, it is proposed that the decoration of Au on the SERS system could bring about a two-step charge transfer (CT) process, introduce localized surface plasmon resonance (LSPR), and thus favor the PI-SERS enhancement. Moreover, this charge transfer also causes obvious changes in the optical behaviors of R6G molecules upon compression. This brings new insights into the SERS study and also offers new ideas for the development of SERS application in high pressure studies.

Pressure-Induced Emission Enhancement and Multicolor Emission for 1,2,3,4-Tetraphenyl-1,3-cyclopentadiene: Controlled Structure Evolution.

Mechanoresponsive luminescent (MRL) materials have attracted considerable attention because of their potential applications in mechanical sensors, memory chips, and security inks; MRL materials possessing high efficiency and multicolor emission qualities are especially interesting. In this Letter, we found 1,2,3,4-tetraphenyl-1,3-cyclopentadiene (TPC) crystal exhibited both pressure-induced emission enhancement (PIEE) and multicolor behavior. In addition, infrared spectroscopy analysis indicated that the ring-opening reaction of the phenyl ring occurred when pressure was beyond 24.7 GPa. The reaction was promoted from 24.7 to 35.9 GPa, which resulted in the redder irreversible color change for the sample released from 35.9 GPa than from 24.7 GPa. The results regarding the mechanoresponsive behavior of TPC offered a deep insight into PIEE and multicolor properties from the structural point of view and inspired the idea of capturing different colors by hydrostatic pressure, which will facilitate the design of and search for high-performance MRL materials.

New Ordered Structure of Amorphous Carbon Clusters Induced by Fullerene-Cubane Reactions.

As a new category of solids, crystalline materials constructed with amorphous building blocks expand the structure categorization of solids, for which designing such new structures and understanding the corresponding formation mechanisms are fundamentally important. Unlike previous reports, new amorphous carbon clusters constructed ordered carbon phases are found here by compressing C8 H8 /C60 cocrystals, in which the highly energetic cubane (C8 H8 ) exhibits unusual roles as to the structure formation and transformations under pressure. The significant role of C8 H8 is to stabilize the boundary interactions of the highly compressed or collapsed C60 clusters which preserves their long-range ordered arrangement up to 45 GPa. With increasing time at high pressure, the gradual random bonding between C8 H8 and carbon clusters, due to "energy release" of highly compressed cubane, leads to the loss of the ability of C8 H8 to stabilize the carbon cluster arrangement. Thus a transition from short-range disorder to long-range disorder (amorphization) occurs in the formed material. The spontaneous bonding reconstruction most likely results in a 3D network in the material, which can create ring cracks on diamond anvils.

High energetic polymeric nitrogen sheet confined in a graphene matrix.

Polymeric nitrogen, as a potential high-energy-density material (HEDM), has many applications, such as in energy storage systems, explosives and propellants. Nowadays it is very urgent to find a suitable method to stabilize polymeric nitrogen at ambient conditions. Herein, we present a new hybrid structure where polymeric nitrogen sheets are sandwiched between graphene sheets in the form of a three-dimensional crystal. According to ab initio molecular dynamics (AIMD) calculations and phonon spectrum calculations, it is demonstrated that polymeric nitrogen sheets are stable at ambient pressure and temperature. The hybrid material has a higher nitrogen content (the weight ratio of nitrogen is up to 53.84%), and the corresponding energy density is 5.2 kJ g-1. The hybrid material (A7@graphene system) has a satisfactory energy density, detonation velocity and detonation pressure. Importantly, the hybrid material can be preserved up to 450 K, and above this temperature, the polymeric nitrogen sheets break up into polymeric nitrogen chains or nitrogen gases and release tremendous energy. Further calculations reveal that small charge transfer between the polymeric nitrogen sheets and graphene sheets creates a weak electrostatic attraction compared with other hybrid materials, which is just good for the stabilization of the polymeric nitrogen sheets at ambient conditions, and favors energy release in a gentle way. The proposed confinement hybrid material which has a high energy density and a gentle energy release temperature, provides a highly promising method for the capture and application of polymeric nitrogen in a controllable way.

Novel Superhard sp

Design and synthesis of new carbon allotropes have always been important topics in condensed matter physics and materials science. Here we report a new carbon allotrope, formed from cold-compressed C_{70} peapods, which most likely can be identified with a fully sp^{3}-bonded monoclinic structure, here named V carbon, predicted from our simulation. The simulated x-ray diffraction pattern, near K-edge spectroscopy, and phonon spectrum agree well with our experimental data. Theoretical calculations reveal that V carbon has a Vickers hardness of 90 GPa and a bulk modulus ∼400 GPa, which well explains the "ring crack" left on the diamond anvils by the transformed phase in our experiments. The V carbon is thermodynamically stable over a wide pressure range up to 100 GPa, suggesting that once V carbon forms, it is stable and can be recovered to ambient conditions. A transition pathway from peapod to V carbon has also been suggested. These findings suggest a new strategy for creating new sp^{3}-hybridized carbon structures by using fullerene@nanotubes carbon precursor containing odd-numbered rings in the structures.

Two-dimensional Penta-BP5 Sheets: High-stability, Strain-tunable Electronic Structure and Excellent Mechanical Properties.

Two-dimensional (2D) crystals exhibit unique and exceptional properties and show promise for various applications. In this work, we systematically studied the structures of a 2D boronphosphide (BP) monolayer with different stoichiometric ratios (BPx, x = 1, 2, 3, 4, 5, 6 and 7) and observed that each compound had a stable 2D structure with metallic or semiconducting electronic properties. Surprisingly, for the BP5 compounds, we discovered a rare penta-graphene-like 2D structure with a tetragonal lattice. This monolayer was a semiconductor with a quasi-direct band gap of 2.68 eV. More importantly, investigation of the strain effect revealed that small uniaxial strain can trigger the band gap of the penta-BP5 monolayer to transition from a quasi-direct to direct band gap, whereas moderate biaxial strain can cause the penta-BP5 to transform from a semiconductor into a metal, indicating the great potential of this material for nanoelectronic device applications based on strain-engineering techniques. The wide and tuneable band gap of monolayer penta-BP5 makes it more advantageous for high-frequency-response optoelectronic materials than the currently popular 2D systems, such as transition metal dichalcogenides and black phosphorus. These unique structural and electronic properties of 2D BP sheets make them promising for many potential applications in future nanodevices.