A spherical adsorbent produced from a bagasse biochar chitosan assembly for selective adsorption of platinum-group metals from wastewater.

This study addresses the challenge of platinum-group metal scarcity by exploring the adsorption of these metals from industrial wastewater. An inexpensive adsorbent with selective platinum-group metal adsorption capacity, named chitosan/citric acid@diatomaceous earth-sugarcane bagasse (CTS/CA@DE-SBS), was newly synthesized. The material features a double coating of chitosan and diatomite on bagasse biochar, and it exhibits an excellent adsorption performance for platinum-group metals due to the synergistic effects of the biochar and chitosan-diatomaceous earth intercross-linked coatings. CTS/CA@DE-SBS achieved an 81 % adsorption efficiency and a static saturated adsorption capacity of 217 mg/g for Pt (IV) in water. Notably, the material exhibited selective adsorption properties for platinum-group metals dissolved in diverse aqueous solutions. The potential for the secondary recovery of platinum-group metals in complex aqueous bodies further underscores the significance of this adsorbent. In conclusion, this research introduces a promising solution for platinum-group metal shortages, offering a cost-effective and selective adsorbent with potential applications in the secondary recovery of these metals from industrial wastewater.

Enhanced Aluminum-Ion Storage Properties of N-Doped Titanium Dioxide Electrode in Aqueous Aluminum-Ion Batteries.

Aqueous aluminum-ion batteries (AIBs) have great potential as devices for future large-scale energy storage systems due to the cost efficiency, environmentally friendly nature, and impressive theoretical energy density of Al. However, currently, available materials used as anodes for aqueous AIBs are scarce. In this study, a novel sol-gel method was used to synthesize nitrogen-doped titanium dioxide (N-TiO2) as a potential anode material for AIBs in water. The annealed N-TiO2 showed a high discharge capacity of 43.2 mAh g-1 at a current density of 3 A g-1. Analysis of the electrode kinetics revealed that the N-TiO2 anodes exhibited rapid diffusion of aluminum ions, low resistance to charge transfer, and high electronic conductivity, enabling good rate performance. The successful implementation of a nitrogen-doping strategy provides a promising approach to enhance the electrochemical characteristics of electrode materials for aqueous AIBs.

Multifunctional self-assembled adsorption microspheres based on waste bamboo shoot shells for multi-pollutant water purification.

In this study, multilayer self-assembled multifunctional bamboo shoot shell biochar microspheres (BSSBM) were prepared, in which bamboo shoot shell biochar was used as the carrier, titanium dioxide as the intermediate medium, and chitosan as the adhesion layer. The adsorption behavior of BSSBM on heavy metals Ag(I) and Pd(II), antibiotics, and dye wastewater was systematically analyzed. BSSBM shows a wide range of adsorption capacity. BSSBM is a promising candidate for the purification of real polluted water, not only for metal ions, but also for Tetracycline (TC) and Methylene Blue (MB). The maximum adsorption amounts of BSSBM on Pd(II), Ag(I), TC and MB were 417.3 mg/g, 222.5 mg/g, 97.2 mg/g and 42.9 mg/g, respectively.The adsorption of BSSBM on Pd(II), MB and TC conformed to the quasi-first kinetic model, and the adsorption on Ag(I) conformed to the quasi-second kinetic model. BSSBM showed remarkable selective adsorption capacity for Ag(I) and Pd(II) in a multi-ion coexistence system. BSSBM not only realized the high value-added utilization of waste, but also had the advantages of low cost, renewable and selective adsorption. BSSBM demonstrated its potential as a new generation of multifunctional adsorbent, contributing to the recovery of rare/precious metals and the treatment of multi-polluted water.

Mechanism of Pd(II) adsorption by nanoscale titanium dioxide loaded bamboo shoot shell biomass.

Palladium (Pd) is widely used in catalyst, aerospace, and medical applications, but only 1% of its reserves are found in nature. So, the recovery of Pd(II) is very important. Natural fibers are a good adsorption material, and the abundant functional groups in bamboo shoot shell (BSS) fibers can form interactions with metal particles. However, few studies on Pd(II) adsorption using BSS fibers exist. In the present work, waste bamboo shoot shells were doped with titanium dioxide (TiO2) particles, and the surface activation of BSS-TiO2@CA by citric acid (CA) was carried out to prepare an efficient and recyclable adsorbent BSS-TiO2@CA for the adsorption of Pd(II). The adsorption performance, adsorption mechanism, and regeneration performance of BSS-TiO2@CA on Pd(II) were systematically analyzed by continuous adsorption experiments, characterization, and response surface method. It was found that the surface-activated waste bamboo shoot shells had an outstanding adsorption capacity of Pd(II), and the maximum adsorption rate of BSS-TiO2@CA reached 85% with a maximum adsorption capacity (Qm) of 175.74 mg/g. The functionalized use of waste bamboo shoot shells provides a new idea for the development of sustainable, cost-effective, and environmentally friendly adsorbents.

A High-Temperature Accelerometer with Excellent Performance Based on the Improved Graphene Aerogel.

A high-temperature accelerometer plays an important role for ensuring normal operation of equipment in aerospace, such as monitoring and identifying abnormal vibrations of aircraft engines. Phase transitions of piezoelectric crystals, mechanical failure and current leakage of piezoresistive/capacitive materials are the prominent inherent limitations of present high-temperature accelerometers working continuously above 973 K. With the rapid development of aerospace, it is a great challenge to develop a new type of vibration sensor to meet the crucial demands at high temperature. Here we report a high-temperature accelerometer working with a contact resistance mechanism. Based on the improved graphene aerogel (GA) prepared by a modulated treatment process, the accelerometer can operate continuously and stably at 1073 K and intermittently at 1273 K. The developed sensor is lightweight (sensitive element <5 mg) and has high sensitivity (an order of magnitude higher than MEMS accelerometers) and wide frequency response range (up to 5 kHz at 1073 K) with marked stability, repeatability and low nonlinearity error (<1%). These merits are attributed to the excellent and stable mechanical properties of the improved GA in the range of 299-1073 K. The accelerometer could be a promising candidate for high-temperature vibration sensing in space stations, planetary rovers and others.

Effect of Cu Substitution and Heat Treatment on Phase Formation and Magnetic Properties of Sm12Co88-xCux Melt-Spun Ribbons.

The phase structure and microstructure of Sm12Co88-xCux (x = 0, 2, 4, 6, 8, 10; at.%) as-cast alloys and melt-spun ribbons prepared via the arc-melting method and melt-spun technology were studied experimentally by X-ray diffraction (XRD) and scanning electron microscope (SEM) with energy dispersive spectroscopy (EDS). The results reveal that the Sm12Co88-xCux (x = 0) as-cast alloy contains Sm2Co17 and Sm5Co19 phases, while the Sm12Co88-xCux (x = 2) as-cast alloy is composed of Sm2Co17, Sm2Co7 and Sm(Co, Cu)5 phases. Sm2Co17 and Sm(Co, Cu)5 phases are detected in Sm12Co88-xCux (x = 4, 6, 8, 10) as-cast alloys. Meanwhile, Sm12Co88-xCux ribbons show a single SmCo7 phase, which is still formed in the ribbons annealed at 1023 K for one hour. After annealed at 1123 K for two hours, cooled slowly down to 673 K at 0.5 K/min and then kept for four hours, the ribbons are composed of Sm2Co17 and Sm(Co, Cu)5 phases. The magnetic measurements of Sm12Co88-xCux ribbons were performed by vibrating sample magnetometer (VSM). The results exhibit that the maximum magnetic energy product ((BH)max), the coercivity (Hcj) and the remanence (Br) of the Sm12Co88-xCux ribbons increase generally with the increase in Cu substitution. In particular, the magnetic properties of the ribbons annealed at 1123 K and 673 K increase significantly with the increase in Cu substitution, resulting from the increase in the volume fraction of the formed Sm(Co, Cu)5 phase after heat treatment.

Phase Formation, Microstructure, and Magnetic Properties of Nd14.5Fe79.3B6.2 Melt-Spun Ribbons with Different Ce and Y Substitutions.

Phase formation and microstructure of (Nd1-2xCexYx)14.5Fe79.3B6.2 (x = 0.05, 0.10, 0.15, 0.20, 0.25) alloys were studied experimentally. The results reveal that (Nd1-2xCexYx)14.5Fe79.3B6.2 annealed alloys show (NdCeY)2Fe14B phase with the tetragonal Nd2Fe14B-typed structure (space group P42/mnm) and rich-RE (α-Nd) phase, while (Nd1-2xCexYx)14.5Fe79.3B6.2 ribbons prepared by melt-spun technology are composed of (NdCeY)2Fe14B phase, α-Nd phase and α-Fe phase, except for the ribbon with x = 0.25, which consists of additional CeFe2 phase. On the other hand, magnetic properties of (Nd1-2xCexYx)14.5Fe79.3B6.2 melt-spun ribbons were measured by a vibrating sample magnetometer (VSM). The measured results show that the remanence (Br) and the coercivity (Hcj) of the melt-spun ribbons decrease with the increase of Ce and Y substitutions, while the maximum magnetic energy product ((BH)max) of the ribbons decreases and then increases. The tendency of magnetic properties of the ribbons could result from the co-substitution of Ce and Y for Nd in Nd2Fe14B phase and different phase constitutions. It was found that the Hcj of the ribbon with x = 0.20 is relatively high to be 9.01 kOe, while the (BH)max of the ribbon with x = 0.25 still reaches to be 9.06 MGOe. It suggests that magnetic properties of Nd-Fe-B ribbons with Ce and Y co-substitution could be tunable through alloy composition and phase formation to fabricate novel Nd-Fe-B magnets with low costs and high performance.

Highly Efficient Cool-White Photoluminescence of (Gua)3Cu2I5 Single Crystals: Formation and Optical Properties.

Zero-dimensional lead-free organic-inorganic hybrid metal halides have drawn attention as a result of their local metal ion confinement structure and photoelectric properties. Herein, a lead-free compound of (Gua)3Cu2I5 (Gua = guanidine) with a different metal ion confinement has been discovered, which possesses a unique [Cu2I5]3- face-sharing tetrahedral dimer structure. First-principles calculation demonstrates the inherent nature of a direct band gap for (Gua)3Cu2I5, and its band gap of ∼2.98 eV was determined by experiments. Worthy of note is that (Gua)3Cu2I5 exhibits a highly efficient cool-white emission peaking at 481 nm, a full-width at half-maximum of 125 nm, a large Stokes shift, and a photoluminescence quantum efficiency of 96%, originating from self-trapped exciton emission. More importantly, (Gua)3Cu2I5 single crystals have a reversible thermoinduced luminescence characteristic due to a structural transition scaled by the electron-phonon coupling coefficients, which can be converted back and forth between cool-white and yellow color emission by heating or cooling treatment within a short time. In brief, as-synthesized (Gua)3Cu2I5 shows great potential for application both in single-component white solid-state lighting and sensitive temperature scaling.

Amorphous Sb2S3 Nanospheres In-Situ Grown on Carbon Nanotubes: Anodes for NIBs and KIBs.

Antimony sulfide (Sb2S3) with a high theoretical capacity is considered as a promising candidate for Na-ion batteries (NIBs) and K-ion batteries (KIBs). However, its poor electrochemical activity and structural stability are the main issues to be solved. Herein, amorphous Sb2S3 nanospheres/carbon nanotube (Sb2S3/CNT) nanocomposites are successfully synthesized via one step self-assembly method. In-situ growth of amorphous Sb2S3 nanospheres on the CNTs is confirmed by X-ray diffraction, field-emission scanning electron microscopy, and transmission electron microscopy. The amorphous Sb2S3/CNT nanocomposites as an anode for NIBs exhibit excellent electrochemical performance, delivering a high charge capacity of 870 mA h g-1 at 100 mA g-1, with an initial coulomb efficiency of 77.8%. Even at 3000 mA g-1, a charge capacity of 474 mA h g-1 can be achieved. As an anode for KIBs, the amorphous Sb2S3/CNT nanocomposites also demonstrate a high charge capacity of 451 mA h g-1 at 25 mA g-1. The remarkable performance of the amorphous Sb2S3/CNT nanocomposites is attributed to the synergic effects of the amorphous Sb2S3 nanospheres and 3D porous conductive network constructed by the CNTs.

Sodium magnesium amidoborane: the first mixed-metal amidoborane.

The first example of a mixed-metal amidoborane Na(2)Mg(NH(2)BH(3))(4) has been successfully synthesized. It forms an ordered arrangement in cation coordinations, i.e., Mg(2+) bonds solely to N(-) and Na(+) coordinates only with BH(3). Compared to ammonia borane and monometallic amidoboranes, Na(2)Mg(NH(2)BH(3))(4) can release 8.4 wt% pure hydrogen with significantly less toxic gases.