Thermally tunable electromagnetic surface waves supported by graphene loaded indium antimonide (InSb) interface.

The thermal agitation plays a vital role in tunability of optoelectronic, structural and chemical characteristics of the temperature sensitive materials. Graphene enables the THz optics, due to its unprecedent controlling characteristics over the traditional materials. The influence of temperature on the monolayer graphene is very negligible due to its low free charge carrier density, to enhance the thermal sensitivity of graphene, the graphene loaded temperature sensitive material interface has been proposed. A theoretical analysis has been carried out on temperature dependent propagation characteristics of electromagnetic surface waves supported by the graphene loaded semi-infinite indium antimonide (InSb). The InSb has been taken as temperature sensitive material. The Drude model has been used for the modeling of InSb in the THz region while the modeling of the graphene has been done by random phase approximation-based Kubo's formulism. To realize the graphene loaded indium antimonide interface, the impedance boundary conditions (IBCs) have been employed. The numerical analysis has been conducted to analyze the influence of temperature on the characteristics of electromagnetic surface waves i.e., dispersion curve, effective mode index (Neff), penetration depth (δ), propagation length (Lp), phase speed (Vp) and field profile, propagating along the graphene loaded InSb. In all the numerical results, the temperature variation has been considered from 200 to 350 K. It has been concluded that the graphene-InSb interface provides more temperature assisted tunability to the interfacial surface modes, commonly known as surface waves, as compared to monolayer graphene. Further, the graphene parameters can play a vital role in the dynamical tuning of electromagnetic surface waves in THz to IR frequency range. The numerically computed results have potential applications in designing of thermo-optical waveguides, temperature assisted communication devices, thermo-optical sensors and near field thermal imaging platforms.

Reflectance and transmittance of terahertz waves from graphene embedded into metamaterial structures.

In this work, the theoretical study of the interaction of terahertz (THz) waves with graphene embedded into two different semi-infinite metamaterials was carried out. To model the graphene, the effective surface conductivity approach based on the Kubo formalism was used. In addition, two types of metamaterials, i.e., double-positive (DPS) and double-negative (DNG), were studied in the THz regime. The numerical modeling of metamaterials was performed in the framework of causality-principle-based Kramers-Kronig relations. The reflectance and transmittance from the graphene-embedded metamaterial structures are studied for the following four different configurations: DPS-Graphene-DPS, DPS-Graphene-DNG, DNG-Graphene-DPS, and DNG-Graphene-DNG. The influence of the chemical potential and scattering rate on the reflectance and transmittance for each configuration is analyzed. It is concluded that the DPS-Graphene-DPS and DNG-Graphene-DNG configurations behave as anti-reflectors for the THz waves, while the DPS-Graphene-DNG and DNG-Graphene-DPS configurations are suitable for THz reflector applications. Moreover, a parametric study revealed that the relative permittivity of the partnering metamaterial can be used as an additional degree of freedom to control the reflectance and transmittance of THz waves. In conclusion, the transmissive and reflective characteristics of THz waves can be controlled effectively with the appropriate choice of graphene parameters, as well as the configuration of metamaterial structures. The convergence of the analytical and numerical results is found with the published results under special conditions. The present work may have potential applications in the design of THz wave controllers, reflectors, absorbers, and anti-reflectors.

Electromagnetic surface waves supported by a resistive metasurface-covered metamaterial structure.

This study examines the analytical and numerical solution of electromagnetic surface waves supported by a resistive metasurface-covered grounded metamaterial structure. To simulate the metamaterial, the Kramers-Kronig relation based on the causality principle is used, while the modeling of the resistive metasurface has been done by implementing the impedance boundary conditions. The analytical expressions for the field phasors of surface waves are developed for the transverse magnetic (TM) polarized mode and transverse electric (TE) polarized mode. The characteristic equations are computed for both modes, and the unknown propagation constant is evaluated numerically in the kernel. After computation, the dispersion curves, electric field profiles, effective mode index ([Formula: see text]), and phase speeds ([Formula: see text]) are presented for both the TM and TE polarized modes. To study the tunability of surface waves, the influence of the thickness of the metamaterial slab ([Formula: see text]), effective permittivity of the metamaterial ([Formula: see text]), thickness of the resistive metasurface ([Formula: see text]), and effective permittivity of the metasurface ([Formula: see text]) on all the numerical results has been studied. However, the geometrical parameters are found to be more sensitive to the effective mode index ([Formula: see text]) and phase speed ([Formula: see text]) of the surface waves. The results are consistent with the published results, which reflects the accuracy of the work. It is concluded that the appropriate choice of parameters can be used to achieve surface waves with the desired characteristics in the GHz range. The present work may have potential applications in surface waveguide design, surface wave speed controllers, surface communication devices, and light trapping configurations.

Hybrid Surface Plasmon Polariton Wave Generation and Modulation by Chiral-Graphene-Metal (CGM) Structure.

Theoretical investigations are carried out to study hybrid SPP wave propagation along the Chiral-Graphene-Metal (CGM) interface. The Kubo formulism is used for the physical modeling of single-layer graphene and the impedance boundary conditions approach is applied at the CGM interface to compute the dispersion relationship for hybrid SPP waves. It is demonstrated that the chirality (ξ) and chemical potential (µc) parameters can be used to modulate the resonance surface plasmon frequencies of the upper and lower propagating modes. Furthermore, the propagation bandgap between the upper and the lower modes can be tuned by changing the chirality parameter. The effect of the chemical potential (µc)and the relaxation time (τ) on the normalized propagation constant, propagation length, and the effective refractive index is studied. The present work may have potential applications in optical and chiral sensing in the terahertz frequency range.