RESUMO
Dehumidification is one of the key challenges facing the air conditioning (AC) industry in the treatment of moist air. Over many decades, the dual role of heat exchangers of AC chillers for the sensible and latent cooling of space has hindered the thermal-lift reduction in the refrigeration cycle due to the requirements of water vapor removal at dew-point and heat rejection to the ambient air. These practical constraints of AC chillers have resulted in the leveling of energy efficiency of mechanical vapor compressors (MVC) for many decades. One promising approach to energy efficiency improvement is the decoupling of dehumidification from sensible processes so that innovative but separate processes can be applied. In this paper, an advanced microwave dehumidification method is investigated in the laboratory, where the microwave (2.45 GHz) energy can be irradiated onto the dipole structure of water vapor molecules, desorbing rapidly from the pores of adsorbent. Results show a significant improvement in performance for microwave dehumidification, up to fourfold, as compared to data available in the literature.
RESUMO
Understanding adsorption phenomena is essential to optimize and customize the energy transformation in numerous industrial and environmental processes. The complex and heterogeneous structure of the adsorbent surface and the distinct interaction of adsorbent-adsorbate pairs are attributed to the diverse response of adsorption phenomena, measured by the state diagrams of adsorption uptake known as adsorption isotherms. To understand various forms of adsorption isotherms, the surface characteristics of the adsorbent surface with the heterogeneity of adsorption energy sites must be analyzed so that they can be modified for the tailored response of the material. Conventionally, such material synthesis is based on chemical recipes or post-treatment. However, if the adsorbent's surface characteristics and heterogeneity are known, then a directed change in the material structure can be planned for the desired results in the adsorption processes. In this paper, a theoretical and mathematical methodology is discussed to analyze the structure of various adsorbents in terms of the distribution of their adsorption energy sites. The change in their surface is then analyzed, which results in the tailored or customized response of the material.
RESUMO
For future sustainable seawater desalination, the importance of achieving better energy efficiency of the existing 19,500 commercial-scale desalination plants cannot be over emphasized. The major concern of the desalination industry is the inadequate approach to energy efficiency evaluation of diverse seawater desalination processes by omitting the grade of energy supplied. These conventional approaches would suffice if the efficacy comparison were to be conducted for the same energy input processes. The misconception of considering all derived energies as equivalent in the desalination industry has severe economic and environmental consequences. In the realms of the energy and desalination system planners, serious judgmental errors in the process selection of green installations are made unconsciously as the efficacy data are either flawed or inaccurate. Inferior efficacy technologies' implementation decisions were observed in many water-stressed countries that can burden a country's economy immediately with higher unit energy cost as well as cause more undesirable environmental effects on the surroundings. In this article, a standard primary energy-based thermodynamic framework is presented that addresses energy efficacy fairly and accurately. It shows clearly that a thermally driven process consumes 2.5-3% of standard primary energy (SPE) when combined with power plants. A standard universal performance ratio-based evaluation method has been proposed that showed all desalination processes performance varies from 10-14% of the thermodynamic limit. To achieve 2030 sustainability goals, innovative processes are required to meet 25-30% of the thermodynamic limit.