Anatomical study of the motor branches of the tibial nerve and incision design for hyperselective neurectomy.

PURPOSE: Selective tibial neurotomy (STN) is a surgical procedure for treating spastic equinovarus foot. Hyperselective neurectomy (HSN) of tibial nerve is a modified STN procedure, which was rarely discussed. This study aimed to describe the branching patterns of the tibial nerve and propose an optimal surgical incision of HSN for treatment of spastic equinovarus foot. METHODS: Sixteen lower limbs were dissected to determine the various branching patterns of the tibial nerve and categorized according to these branching patterns. The mean distances from the nerve entry points to the tip of femur's medial epicondyle were measured, as well as their percentage to the overall length of the leg. The surgical incision was designed according to the range of these nerve entry points. RESULTS: The tibial nerve sent out proximal and distal motor branches based on their position relative to the soleus muscle's tendinous arch. For proximal motor branches, the branches innervating the medial gastrocnemius, lateral gastrocnemius and proximal soleus were categorized into types I (9/16), II (5/16) and III (2/16). Measurements from the medial epicondyle to the nerve entry points into the medial gastrocnemius, lateral gastrocnemius and proximal soleus ranged from 14 to 33 mm (4-9% of leg length), 22-45 mm (6-12%) and 35-81 mm (10-22%), respectively. Distal motor branches including the distal soleus, posterior tibialis, flexor digitorum longus and flexor hallucis longus, were classified as types A (8/14), B (4/14) and C (2/14), with the distances from their respective terminal points to the medial epicondyle were 67-137 mm (19-39%), 74-125 mm (20-35%), 116-243 mm (33-69%) and 125-272 mm (35-77%). CONCLUSIONS: The motor branches of tibial nerve were classified into two groups and each subdivided into three types. Detailed location parameters may serve as an anatomical basis for designing incision of HSN.

A modified partial wedge-shaped metaphyseal ulnar osteotomy for the treatment of ulnar impaction syndrome with reverse oblique sigmoid notch.

We describe a modified metaphyseal ulnar osteotomy to treat ulnar impaction syndrome with a reverse oblique sigmoid notch. Based on a computational analysis of radiographs, a modified wedge metaphyseal ulnar osteotomy was devised with its apex positioned at the ulnar styloid base to avoid impaction between the sigmoid notch and ulnar head. Subsequently, nine patients with ulnar impaction syndrome and a reverse oblique sigmoid notch underwent this operation, combined with arthroscopic exploration and transosseous triangular fibrocartilage complex repair. The mean follow-up was 14 months. All patients achieved bone union within 5 weeks, with no degenerative changes being observed during the follow-up assessments. The final follow-up assessments revealed decreases in ulnar variance and in the scores for Visual Analogue Scale, Quick Disabilities of the Arm, Shoulder and Hand questionnaire and the Patient-Rated Wrist Evaluation. All patients achieved excellent or good grades on the Modified Mayo Wrist Score. This technique is effective in treating the ulnar impaction syndrome with a reverse oblique sigmoid notch.Level of evidence: IV.

Functional outcomes of different surgical treatments for common peroneal nerve injuries: a retrospective comparative study.

BACKGROUND: This study aims to assess the recovery patterns and factors influencing outcomes in patients with common peroneal nerve (CPN) injury. METHODS: This retrospective study included 45 patients with CPN injuries treated between 2009 and 2019 in Jing'an District Central Hospital. The surgical interventions were categorized into three groups: neurolysis (group A; n = 34 patients), nerve repair (group B; n = 5 patients) and tendon transfer (group C; n = 6 patients). Preoperative and postoperative sensorimotor functions were evaluated using the British Medical Research Council grading system. The outcome of measures included the numeric rating scale, walking ability, numbness and satisfaction. Receiver operating characteristic (ROC) curve analysis was utilized to determine the optimal time interval between injury and surgery for predicting postoperative foot dorsiflexion function, toe dorsiflexion function, and sensory function. RESULTS: Surgical interventions led to improvements in foot dorsiflexion strength in all patient groups, enabling most to regain independent walking ability. Group A (underwent neurolysis) had significant sensory function restoration (P < 0.001), and three patients in Group B (underwent nerve repair) had sensory improvements. ROC analysis revealed that the optimal time interval for achieving M3 foot dorsiflexion recovery was 9.5 months, with an area under the curve (AUC) of 0.871 (95% CI = 0.661-1.000, P = 0.040). For M4 foot dorsiflexion recovery, the optimal cut-off was 5.5 months, with an AUC of 0.785 (95% CI = 0.575-0.995, P = 0.020). When using M3 toe dorsiflexion recovery or S4 sensory function recovery as the gold standard, the optimal cut-off remained at 5.5 months, with AUCs of 0.768 (95% CI = 0.582-0.953, P = 0.025) and 0.853 (95% CI = 0.693-1.000, P = 0.001), respectively. CONCLUSIONS: Our study highlights the importance of early surgical intervention in CPN injury recovery, with optimal outcomes achieved when surgery is performed within 5.5 to 9.5 months post-injury. These findings provide guidance for clinicians in tailoring treatment plans to the specific characteristics and requirements of CPN injury patients.

Cadaveric feasibility study of modified contralateral C7 nerve transfer for targeted functional recovery in hemiplegic upper extremity.

BACKGROUND: Contralateral cervical seventh (cC7) nerve to C7 transfer has been proven effective for treating spastic upper limb. However, for those whose major impairment is not in the C7 area, cC7 nerve transfer to other nerve(s) may achieve a better outcome. The aim of this study was to explore the optimal surgical approach for transferring cC7 to one or two nerves by cadaveric study and to discuss the possible applications for hemiplegic patients. METHODS: Modified cC7 transfer to one (five procedures) or two nonadjacent (three procedures) nerve roots was proposed, and success rates of direct coaptation through two surgical approaches were compared: the superficial surface of longus colli (sLC) and the deep surface of longus colli (dLC) approaches. The length, diameter and distance of relevant nerves were also measured in 25 cadavers. RESULTS: Compared with the sLC approach, the distance of the dLC approach was 1.1 ± 0.3 cm shorter. The success rates for the sLC and dLC approaches were as follows, respectively: cC7-C5 surgery, 94% and reached 98%; cC7-C6 surgery, 54% and 96%; cC7-C7 surgery, 42% and 94%; cC7-C8 surgery, 34% and 94%; cC7-T1 surgery, 24% and 62%; cC7-C5C7 surgery, 74% and 98%; cC7-C6C8 surgery, 54% and 98%. cC7-C7T1 surgery, 42% and 88%. CONCLUSIONS: The dLC approach greatly improved direct coaptation rate for cC7 nerve transfer. The modified cC7 nerve transfer procedures are technically feasible for further application in clinic.

Arthroscopy-assisted partial trapeziectomy combined with ligament reconstruction for thumb carpometacarpal joint osteoarthritis: A different technique.

Background: There is no consensus on the best surgery option for thumb carpometacarpal osteoarthritis (CMC OA). The traditional method has the risk of large trauma, obvious metacarpal subsidence, and decreased stability. The aim of this study is to introduce a different technique to restore the function and stability of the first carpal metacarpal joint with minimal trauma, rapid pain relief, reduced complications, and the clinical outcomes in the long-term follow-up was evaluated and statistically analyzed. Methods: This was a retrospective study of 10 patients with a mean age of 51.8 years. The surgery consisted of removing partial trapezium through arthroscopy, reconstructing the stability with flexor carpi radialis suspension and tendon interposition. The subjective assessment included visual analog scale (VAS) of pain, quick disabilities of the arm, shoulder, and hand (Quick-DASH) score, and patient satisfaction. The range of motion, grip strength, pinch strength, and radiographic assessment, which can reflect stability of the thumb, were objectively evaluated and statistically analyzed. Results: Ten patients were monitored at a mean follow-up of 6.8 years. The mean grip strength improved significantly from 16.64 to 22.57 kg after surgery. Pinch strength improved significantly from 3.72 to 5.71 kg on average. The Kapandji score improved significantly from 5.7 to 8.6 on average. 80% (8/10) of the patients were satisfied with this surgery. On objective indicators, the VAS score decreased significantly from 6.4 to 1.3 on average. The mean Quick-DASH score improved significantly from 6.1 to 28.9. Postoperative x-ray showed slight subsidence and dislocation of the first metacarpal in two patients and did not affect the function by measurement. Conclusion: Arthroscopy-assisted partial trapezium resection combined with ligament reconstruction could be a workable and promising surgical technique in patients with thumb CMC OA. It can offer the advantages of minimizing surgical injury by preserving the first carpal metacarpal joint capsule to protect its stability, with a rapid pain relief, function improvement, and satisfactory results in patients' clinical measurements.

Preparation of TiO2 Superhydrophobic Composite Coating and Studies on Corrosion Resistance.

The superhydrophobic coatings with excellent performance are prepared on the brass substrate to improve its application limitations in real production. In this article, the superhydrophobicity was obtained by the modification of TiO2 nanoparticles, and the FAS/STA-TiO2 superhydrophobic coating of the composite structure was obtained by modification of 1, 1, 2H, 2H-perfluoroquine trimethyl silane (FAS). By using scanning electron microscopes (SEMs), X-ray spectrometers (EDSs), and Fourier transform infrared (FTIR) spectrometers, the surface morphology, chemical composition, and functional group structure of the samples were analyzed in turn. Experiments show that the water contact angle of the FAS-modified STA-TiO2 coating reaches 161.3°, and the sliding angle is close to 1.2°. Based on the chalk dust containment, it has enabled noticeable self-cleaning properties. The composite superhydrophobic coating also presents enhanced adhesive strength compared with the single coating by the tape peeling experiment. Moreover, the composite coating has a corrosion current density as low as 8.41 × 10-7 A/cm2, and the largest |Z| in low frequency in a 3.5% NaCl solution to achieve better protection of the brass substrate. It is also not difficult to see that FAS/STA-TiO2 coating can not only improve the corrosion resistance of brass substrates but also be applied to other metal substrates.

Load-Bearing Radioulnar Distances to Evaluate an Unstable Distal Radioulnar Joint in Patients With Triangular Fibrocartilage Complex Tears.

PURPOSE: Tears of the proximal component of the triangular fibrocartilage complex (pc-TFCC) lead to instability in the distal radioulnar joint. The aim of this study was to measure the load-bearing radioulnar distances (RaUls) and to evaluate its diagnostic suitability in patients with pc-TFCC tears. METHODS: We retrospectively assessed and compared the lateral wrist radiographs of 61 adult patients with arthroscopically confirmed tears of pc-TFCC with those of a control group of 64 healthy participants. The RaUl was measured on lateral radiographs, and the difference in RaUl (D-value) between load-bearing and nonloading conditions was calculated in the 2 groups. Receiver operator characteristic curves were plotted to determine the diagnostic accuracy and optimal cutoff-score of load-bearing RaUl and RaUl D-value. The diagnostic performance was verified in a validation sample of patients (30 wrists) with pc-TFCC tears and a control group of healthy individuals (30 wrists). RESULTS: In the training sample, load-bearing RaUls of the affected wrists were higher than the same side of the controls (12.0 mm vs 7.1 mm). The TFCC-injury group showed a significantly higher RaUl D-value than the control group (8.5 mm vs 3.4 mm). Using a receiver operator characteristic curve, the cutoff value of load-bearing RaUl was 10 mm (sensitivity = 97.6%, specificity = 85.7%) and that of RaUl D-value was 6.5 mm (sensitivity = 90.2%, specificity = 78.5%). The areas under the curve of load-bearing RaUl and RaUl D-value were 0.96 and 0.88, respectively. In the test sample, the sensitivity, specificity, and accuracy of RaUl were 0.93, 0.70, and 0.82 and those of RaUl D-value were 0.77, 0.83, and 0.80 respectively. CONCLUSIONS: Load-bearing RaUl measurement is a simple method to diagnose an unstable distal radioulnar joint in patients with TFCC injury. The load bearing RaUl of >10 mm or RaUl D-value of >6.5 mm can be used to differentiate TFCC injuries and showed acceptable accuracy. TYPE OF STUDY/LEVEL OF EVIDENCE: Diagnostic II.

Reconstruction of paralyzed arm function in patients with hemiplegia through contralateral seventh cervical nerve cross transfer: a multicenter study and real-world practice guidance.

BACKGROUND: A previous randomized controlled trial showed contralateral seventh cervical nerve (CC7) cross transfer to be safe and effective in restoring the arm function of spastic arm paralysis patients in a specified population. Guidance on indications, safety and expected long-term improvements of the surgery are needed for clinical practice. METHODS: This is a retrospective, multicenter, propensity score-matched cohort study. All patients registered between 2013 and 2019 with unilateral spastic arm paralysis over 1 year who were registered at one of five centers in China and South Korea were included. Patients received CC7 cross transfer or rehabilitation treatment in each center. Primary outcome was the change in the upper-extremity Fugl-Meyer (UEFM) score from baseline to 2-year follow-up; larger increase indicated better functional improvements. FINDINGS: The analysis included 425 eligible patients. After propensity score matching, 336 patients who were 1:1 matched into surgery and rehabilitation groups. Compared to previous trial, patient population was expanded on age (< 12 and > 45 years old), duration of disease (< 5 years) and severity of paralysis (severe disabled patients with UEFM < 20 points). In matched patients, the overall increases of UEFM score from preoperative evaluation to 2-year follow-up were 15.14 in the surgery group and 2.35 in the rehabilitation group (difference, 12.79; 95% CI: 12.02-13.56, p < 0.001). This increase was 16.58 at 3-year and 18.42 at 5-year follow-up compared with the surgery group baseline. Subgroup analysis revealed substantial increase on UEFM score in each subgroup of age, duration of disease, severity of paralysis and cause of injury. No severe complication or disabling sequela were reported in the surgery group. INTERPRETATION: This study showed that CC7 cross transfer can provide effective, safe and stable functional improvements in long-term follow-up, and provided evidences for expanding the indications of the surgery to a wider population of patients with hemiplegia.

Impairments and Compensations of Static Balance and Plantar Load Distribution in Patients With Chronic Stroke: An Observational Study.

OBJECTIVES: The purpose of this study was to explore impairment and compensation characteristics of static balance and plantar load distribution in patients with chronic stroke. METHODS: We recruited 68 patients who had chronic stroke who could stand independently (stroke group) and 30 healthy individuals (control group) with the Zebris FDM platform. Static balance parameters, including center of pressure (COP) ellipse sway area, COP path length, and angle-θ between y and major axis, were compared between 2 groups under standard standing posture. In the stroke group, balance parameters were re-tested under their preferring standing posture. Plantar load distribution was also assessed. Another 8 patients with chronic stroke who could not stand independently and had to rely on a crutch were enrolled to analyze the characteristics of balance compensation. RESULTS: In the stroke group, the ellipse sway area, COP path length, and angle-θ were significantly larger than those of the control group. Sixty-one (89.7%) patients preferred standing with the affected foot outward-forward supporting, and their preferring standing balance was better than that of standard standing. All patients who could not stand independently tended to compensate for balance with a crutch supporting laterally and also preferred standing with a typical posture- the affected foot was outward-forward. CONCLUSIONS: In patients post stroke, static balance is impaired mainly at the lateral direction, and patients commonly locate the crutch laterally for compensation of lateral balance. Patients preferred standing with the affected foot outward-forward supporting, and their preferring standing balance was better than that of standard standing, which challenged the necessity of training standing symmetrically.

3D printing-assisted percutaneous fixation makes the surgery for scaphoid nonunion more accurate and less invasive.

PURPOSE: The study was to explore whether the 3-dimensional printing guiding plate system could facilitate the modified procedure for arthroscopic treatment of nondisplaced scaphoid nonunion. METHODS: Patients, diagnosed with scaphoid nonunion without displacement, were randomly assigned into two groups. In Group A, the 3-dimensional printing guiding plate system was used for guiding fixation during the surgery. In Group B, fixation was performed with intra-operative fluoroscopy. The bone operation time was recorded during the surgery. The patients were evaluated before surgery and followed-up after six post-operative months, including motion ratio, strength ratio, Visual Analogue Scale, modified Mayo Scores, Patient Rated Wrist Evaluation scores, plain radiography and CT scan. RESULTS: Sixteen patients were recruited for the study. The average bone operation time in Group A was statistically shorter than that in Group B. CONCLUSIONS: 3-dimensional printing technique-assisted arthroscopic bone graft and fixation of scaphoid nonunion constitute an effective and accurate clinical treatment option. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: The concept and technique of 3D printing assisted percutaneous fixation introduced in this paper have the potential to be applied in a variety of operations requiring accurate percutaneous fixation, especially for the joint injuries.

Hyperselective neurectomy in the treatment of elbow and wrist spasticity: an anatomical study and incision design.

OBJECTIVE: Hyperselective neurectomy is used to treat spastic arm paralysis. The aim of the study was to analyze the nerve branching patterns of elbow and wrist flexors/pronator to inform hyperselective neurectomy approached. METHODS: Eighteen upper extremities of fresh cadaver specimen were dissected. The number of motor branches from the musculocutaneous nerve to biceps brachii and brachialis, median nerve to pronator teres, flexor carpi radialis and ulnar nerve to flexor carpi ulnaris were counted. The origin site of each primary motor branch was documented. RESULTS: Either biceps or brachialis was innervated by one or two primary motor branches. Pronator teres was innervated by one to three motor trunks and the pattern for flexor carpi radialis was a common trunk with other branches. The origin of the biceps and brachialis nerve trunk was located approximately 30% to 60% of the length of the arm. The median nerve branched to pronator teres and flexor carpi radialis at the region about 34mm (SD 18.8mm) above and 50mm (SD 14.9mm) below the medial epicondyle. Flexor carpi ulnaris was innervated by one to three motor trunks and the mean distance from the medial epicondyle to the origin of flexor carpi ulnaris nerve on ulnar nerve was 18.7 mm (SD 6.5mm). CONCLUSION: Primary motor branches to elbow flexors, wrist flexors and pronators were various, while the regions of their origins were relatively settled. It was recommended the incisions be designed according to the location of the primary motor trunks.

Two-dimensional type-II g-C3N4/SiP-GaS heterojunctions as water splitting photocatalysts: first-principles predictions.

Hydrogen production from water splitting by sunlight is a promising approach to solve the increasing energy and environmental crises, and the two-dimensional (2D) g-C3N4 monolayer is a red star in this realm. However, it suffers from low quantum efficiency caused by the fast combination of photogenerated electrons and holes. In this work, we investigate the electronic and photocatalytic properties of three newly proposed g-C3N4/SiP-GaS-α, -ß and -γ heterojunctions via first principles predictions. Theoretical results demonstrate that the three g-C3N4/SiP-GaS heterojunctions exhibit direct bandgaps of ∼2.2 eV, and have a type-II band alignment with the valence band maximum (VBM) located at the g-C3N4 layer and the conduction band minimum (CBM) at the SiP-GaS layer. Furthermore, their band edges straddle the redox potential of water in a wide range of biaxial strain. Their absorption coefficients are several times larger than that of most previously discovered 2D heterojunctions. Moreover, the in-built electric field adds a driving force to separate photogenerated electrons and holes. The oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) successfully take place on the g-C3N4 and SiP-GaS layers, respectively. Briefly, separated charge carriers, suitable band edges and strong visible-light absorbance, successful OER and HER enable the three g-C3N4/SiP-GaS heterojunctions to be promising water-splitting photocatalysts.

Contralateral hemi-fifth-lumbar nerve transfer for unilateral lower limb dysfunction due to incomplete traumatic spinal cord injury: A report of two cases.

Current strategies for the chronic stage of spinal cord injury (SCI) had seen little progress. In this report, we present the use of contralateral L5 nerve transfer for the treatment of incomplete SCI patients with unilateral lower limb dysfunction in two male patients. One was diagnosed with L2 vertebral fracture and dislocation combined with coni medullaris injury 10 months prior, and the other was diagnosed with T6 and T7 vertebral fractures with SCI 24 months prior. The patients were treated with decompression surgery within 24 hr after injury. The patients reached a recovery plateau after 6-8 months of spontaneous recovery of locomotion and sustained paralysis in the right leg and were left confined to the wheelchair. The score on the lower-extremity Fugl-Meyer assessment (FMA-LE) was 7 for both patients. The patients were then enrolled, and they underwent half of the anterior root of the contralateral L5 transfer to S1 and S2 to improve lower limb motor function. A posterior approach was performed to expose the L5, S1, and S2 nerve roots. Half of the anterior root of the left L5 was cut, and end-to-end neurorrhaphy from the left L5 to the right S1 and S2 was performed subdurally. After the surgery, routine rehabilitation treatments were prescribed. Muscle strength decreased transiently in the donor-side before recovering within 12 months postoperatively. Muscle strength was significantly improved on the affected side 2 years postoperatively, when the FMA-LE scores increased to 14 and 15, respectively. The patients regained independent walking ability with crutches. This report suggests that contralateral hemi-5th-lumbar nerve transfer is safe and can benefit incomplete SCI patients with unilateral lower limb dysfunction.

Contralateral cervical seventh nerve transfer for spastic arm paralysis via a modified prespinal route: a cadaveric study.

BACKGROUND: We proposed contralateral cervical seventh nerve transfer for spastic arm paralysis after central neurological injury in the New England Journal of Medicine (NEJM) in 2018. In this surgery, we applied a new surgical route for nerve transfer, the Huashan prespinal route. The objective of this study was to elaborate our new surgical technique, clarify its relationship to the vertebral artery, and provide anatomical data on this novel method. METHODS: The effectiveness and safety of the Huashan prespinal route in contralateral C7 nerve transfer were evaluated anatomically. Nine cadavers (4 males, 5 females) were available for this study. Among these, anatomical parameters of the vertebral artery were obtained from 6 cadavers, and the anastomosis of the bilateral cervical seventh nerve was observed on 3 cadavers undergoing contralateral C7 nerve transfer via the Huashan prespinal route. RESULTS: Tension-free anastomosis of the bilateral cervical seventh nerve was achieved through the Huashan prespinal route. The tilt angle of the vertebral artery to the sagittal plane (with thyroid cartilage as the origin) was 25.5 ± 4.5°, at 22.5 ± 1.6° and 28.7 ± 4.3° on the left and right side, respectively. The safe drilling angle to penetrate through the longus colli muscles for the creation of a longus colli muscle tunnel to avoid injury to the vertebral artery in our surgical technique was above 33.2°. CONCLUSIONS: The cadaveric study confirms that the presented technique allowed simple, effective, and safe contralateral C7 nerve transfer. This technique can be used in the treatment of hemiplegia and brachial plexus injury. There is a safe scope of drilling angle for creating the longus colli muscle tunnel required for this surgical route. The anatomical parameters obtained in this study will be helpful for the performance of this operation.

Contralateral seventh cervical nerve transfer can affect the pennation angle of the lower limb in spastic hemiplegia patients: An observational case series study.

INTRODUCTION: We previously reported transferring seventh cervical (C7) nerve from unaffected side to affected side in patients with spastic hemiplegia due to chronic cerebral injury, to improve function and reduce spasticity of paralyzed upper limb. In the clinics, some patients also reported changes of spasticity in their lower limb, which could not be detected by routine physical examinations. Pennation angle of muscle can indirectly reflect the condition of spasticity. The purpose of this study was to evaluate whether this upper limb procedure may affect spasticity of lower limb, using ultrasonography to detect changes of muscle pennation angle (PA). METHODS: Twelve spastic hemiplegia patients due to cerebral injury including stroke, cerebral palsy, and traumatic brain injury, who underwent C7 nerve transfer procedure, participated in this study. B-mode ultrasonography was used to measure PA of the gastrocnemius medialis (GM) muscle at rest preoperatively and postoperatively. The plantar load distribution of the lower limbs was evaluated using a Zebris FDM platform preoperatively and postoperatively. RESULTS: The PA of the GM was significantly smaller on the affected side than that of unaffected side before surgery. On the affected side, the postoperative PA was significantly larger than preoperative PA. On the unaffected side, the postoperative PA was not significantly different compared to preoperative PA. The postoperative plantar load distribution of the affected forefoot was significantly smaller than preoperative load distribution, which was consistent with ultrasonography results. CONCLUSIONS: This study indicates that C7 nerve transfer surgery for improving upper limb function can also affect muscle properties of lower limb in spastic hemiplegia patients, which reveals a link between the upper and lower limbs. The interlimb interactions should be considered in rehabilitation physiotherapy, and the regular pattern and mechanism need to be further studied.

3-Dimensional Printing-Assisted Percutaneous Fixation for Acute Scaphoid Fracture: 1-Shot Procedure.

Scaphoid fractures are the most common carpal fractures. Percutaneous fixation is a popular treatment option for nondisplaced or minimally displaced scaphoid fractures. Placement of the guidewire in the percutaneous fixation procedure often requires several attempts and adjustments with the help of intraoperative fluoroscopy. This article describes a 1-shot procedure of percutaneous fixation for acute scaphoid fracture with patient-specific guiding templates made by computer reconstructions and 3-dimensional printing technique.

Arthroscopic distal metaphyseal ulnar shortening osteotomy for ulnar impaction syndrome: a different technique.

Ulnar impaction syndrome generally occurs with positive ulnar variance. The solution to the problem is to unload the ulnocarpal joint. Effective surgical options include diaphyseal ulnar shortening osteotomy, open wafer osteotomy, and arthroscopic wafer osteotomy. Recently, Slade and Gillon described an open procedure of ulnar shortening in the osteochondral region of the ulnar head. The procedure minimizes the risk of hemarthrosis and does not require hardware removal, which are problems with other surgical options. This article introduces a new arthroscopic technique of distal metaphyseal ulnar shortening osteotomy for ulnar impaction syndrome. This technique offers the advantages of minimizing surgical injury to the dorsal capsule of the distal radoulnar joint and so protects its stability.

Partial ipsilateral C7 transfer to the upper trunk for C5-C6 avulsion of the brachial plexus.

BACKGROUND: Ipsilateral whole C7 root transfer has been reported in treating C5-C6 avulsion. To minimize donor deficits, partial ipsilateral C7 (PIC7) transfer was developed. OBJECTIVE: To investigate the long-term results of PIC7 transfer to the upper trunk in treating C5-C6 avulsion of the brachial plexus. METHODS: We prospectively studied 8 young adults with C5-C6 avulsion. Five patients (group A) who also had spinal accessory nerve (SAN) injury underwent PIC7 transfer to the upper trunk. The other 3 patients (group B) without SAN injury underwent a combination of PIC7 to the upper trunk and the SAN to the suprascapular nerve (SSN). Postsurgical evaluations including donor deficits, functional recovery, and co-contraction of the muscles were performed 1 week later and then at intervals of 3 months. RESULTS: After a mean period of 39.2 months, all subjects were found to have gained elbow flexion of 110 to 150° with muscle strength of M4-5. The patients in group B achieved external rotation of 60 to 70° at M3-4, and 2 achieved shoulder abductions approaching 180° at M4. The patients in group A showed no active external rotation and shoulder abduction of 25 to 50° at M2-3. The temporary deficits caused by PIC7 transfer disappeared in all subjects within the first 3 months. Co-contraction of the latissimus dorsi against the deltoid was recorded in group A but not in group B. CONCLUSION: PIC7 transfer, when combined with SAN transfer to SSN as a novel approach, is a safe, easy, and efficacious surgical procedure for patients with simple C5-C6 avulsion.