Prevertebral soft tissue swelling after anterior cervical internal fixation at different segments: a retrospective study.

Atlantoaxial segments have not been discussed in existing studies on prevertebral soft tissue (PVST) swelling after cervical operations. This study aimed to investigate the characteristics of PVST swelling after anterior cervical internal fixation at different segments. This retrospective study included patients who underwent transoral atlantoaxial reduction plate (TARP) internal fixation (Group I, n=73), C3/C4 anterior decompression and vertebral fixation (Group II, n=77), or C5/C6 anterior decompression and vertebral fixation (Group III, n=75) at our Hospital. The PVST thickness at C2, C3, and C4 segments was measured before and 3 days after the operation. Time of extubation, number of patients with postoperative re-intubation and dysphagia were collected. Results show that all patients had significant postoperative PVST thickening (all P<0.01). PVST thickening at C2, C3, and C4 was significantly greater in Group I than in Groups II and III (all P<0.01). PVST thickening at C2, C3, and C4 in Group I was 1.87 (14.12mm/7.54mm), 1.82 (12.90mm/7.07mm) and 1.71 (12.09mm/7.07mm) times of that in Group II, respectively. PVST thickening at C2, C3, and C4 in Group I was 2.66 (14.12mm/5.31mm), 1.50 (12.90mm/8.62mm) and 1.32 (12.09mm/9.18mm) times of that in Group III, respectively. The patients in Group I had significantly later postoperative extubation (Both P<0.01) than the patients in Groups II and III. None of the patients had postoperative re-intubation or dysphagia. We conclude that PVST swelling was greater in patients who underwent TARP internal fixation than in patients who underwent anterior C3/C4 or C5/C6 internal fixation. Hence, after TARP internal fixation, patients should be given proper respiratory tract management and monitoring.

Cuff-leak test combined with interventional bronchoscopy benefits early extubation for patients who received tarp surgery.

PURPOSE: This study explored the performance characteristics of a cuff-leak test (CLT) combined with interventional fiberoptic bronchoscopy (FBS) for evaluating whether early nasoendotracheal extubation was possible for patients who had received transoral atlantoaxial reduction plate (TARP) internal fixation surgery. METHODS: 318 patients who underwent surgery were retrospectively analyzed (between January 2006 and December 2012). Extubation was performed by conventional approach (CA group, until December 2008) and improved approach (IA group, from January 2009) including CLT and an interventional FBS procedure. The extubation success within 1-3 days after surgery, incidence of postextubation stridor and tracheal reintubation were examined. RESULTS: More IA-treated patients experienced extubation during the first 2 days than those CA-treated, median extubation time was 3 (2, 3) days in the CA group and 2 (1, 2) days in the IA group (all P < 0.01). The incidence of stridor and reintubation was 5.69 and 0.57 % in IA and 11.98 and 4.93 % in CA, respectively (both P < 0.05). For the CLT-positive patients in the IA group that remained intubated until day 3-4, interventional FBS was applied for safe extubation and achieved 100 % success. CONCLUSION: Early extubation through IA is safe and interventional FBS assists successful extubation for CLT-positive patients who underwent TARP surgery.

An 11-Year Review of the TARP Procedure in the Treatment of Atlantoaxial Dislocation.

STUDY DESIGN: Retrospective study. OBJECTIVE: The aim of the study was to introduce the surgical techniques and evaluate the clinical outcomes of transoral atlantoaxial reduction plate (TARP) for the treatment of atlantoaxial dislocation. SUMMARY OF BACKGROUND DATA: Researchers have reported on transoral plate internal fixation for the treatment of irreducible atlantoaxial dislocation (IAAD) without long-term follow-up and detailed clinical experience. METHODS: The clinical records of 388 patients with atlantoaxial dislocation (IAAD, 340 cases; fixed atlantoaxial dislocation [FAAD], 48 cases) who received the TARP procedure from April 2003 to September 2014 were retrospectively reviewed. They were treated separately with TARP-I or TARP-II (82 cases), TARP-III (248 cases), or TARP-IV (58 cases). X-ray and magnetic resonance imaging were used to evaluate the efficacy of reduction and the degree of decompression, respectively. The long-term clinical outcome was evaluated by Japanese Orthopaedic Association scoring and the Symon and Lavender standard. RESULTS: Immediate reduction was achieved for all the patients with IAAD (340/340), whereas anatomical reduction was achieved for 98.2% of patients (334/340). Anatomical reduction was achieved in 87.5% of patients with FAAD (42/48). The average degree of spinal cord decompression ranged from 75% to 100% with an average of 88.4%. The clinical data of 106 patients were evaluated in the latest follow-up (12-108 mo, average 60.5 mo). The average spinal cord improvement rate by Japanese Orthopaedic Association scoring was 62.1%. According to the Symon and Lavender standard, there were 85 cases rated as markedly effective, 104 cases as effective, and 2 cases as noneffective. The overall markedly effective rate was 80% and the effective rate was 98%. CONCLUSION: The TARP procedure showed good anterior atlantoaxial release, reduction, decompression, and internal fixation for patients with IAAD and FAAD through a single anterior approach. It has the advantages of three-dimensional immediate atlantoaxial reduction and sufficient decompression. LEVEL OF EVIDENCE: 3.

Treatment of irreducible atlantoaxial dislocation using the transoral atlantoaxial pedicle screw technique. A report of 10 cases.

OBJECTIVE: The purpose of this work is to evaluate the outcome of the transoral atlantoaxial pedicle screw technique for the treatment of irreducible atlantoaxial dislocation (IAAD). PATIENTS AND METHODS: A total of 10 patients with IAAD were treated using the transoral atlantoaxial pedicle screw technique. We compared preoperative and postoperative JOA (Japanese Orthopedic Association) scores and observed bone graft fusion rate of the atlantoaxial joint, and examined whether our technique was suitable for the treatment of IAAD. RESULTS: The mean preoperative and postoperative JOA scores (9.2 ± 0.63 and 12.9 ± 0.73, respectively) were significantly different (P < 0.05). The atlantoaxial rigid bony fusion rate was 100 % in 10 cases. All cases were followed up for an average of 5.1 years (range 3.5-6 years). CONCLUSION: The transoral atlantoaxial screw reconstruction plate technique is a novel surgical technique for the treatment of IAAD in upper cervical diseases.

Effects of Different Lengths of Ti Nanorods Topography on Mesenchymal Stem Cell Growth and Proliferation.

Total hip and knee arthroplasty have being successfully performed in world-wide in recent years. However, poor osseointegration between implant (polish surface) and host bone tissue is one of the main causes for aseptic loosening in Ti-based materials and result in failure. Fabricating nanotopography is a promising method to improve cell behaviors and promote osseointegration. Ti nanorods array of vary lengths have been produced via selective corrosion of Ti substrate using electrochemical anodization technique on titanium surface. In this study, we investigated the murine bone mesenchymal stem cell (MSC) behaviors in response to these different lengths of nanorods. The result showed that the nanorod of 100 nm length increased MSCs adhesion and proliferation. Increased elongation of cytoskeleton actin was also observed on 100 nm height, which resulted in substantially up-regulation of alkaline phosphatase (ALP) activity, suggesting greater bone-forming ability than control Ti. The Ti nanorods of 100 nm length may be a promising implant surface to improve the osseointegration.

Current Trends in Management of Atlantoaxial Dislocation.

Atlantoaxial dislocation (AAD), often caused by trauma, tumors or congenital malformations, is a challenging disorder of the craniocervical junction. Because of its deep location and intricate anatomic structure, the craniocervical junction is always a difficult region for spine surgery. With recent developments in medical science, great progress has been made in the diagnosis and treatment of AAD such that more instructive clinical classifications and efficacious treatment strategies, various novel operation techniques including innovative posterior or transoral anterior reduction, and novel fixation instruments are now widely used in clinical practice for managing AAD. However, surgeons continue to face more special characteristics and difficulty in carrying out upper cervical surgery than they encounter in other regions of the spine. Consequently, this high risk surgery should only be performed by extremely skilled and experienced surgeons and only when stringent indications have been met. Therefore, the aim of this course is to assist surgeons who are dealing with AAD by providing comprehensive information about AAD, including related anatomy, classification, clinical manifestations and diagnosis, imaging examinations and surgical techniques, thus decreasing the occurrence of complications and improving the level of diagnosis and treatment.

Effect of activated autologous platelet-rich plasma on proliferation and osteogenic differentiation of human adipose-derived stem cells in vitro.

To investigate whether activated autologous platelet-rich plasma (PRP) can promote proliferation and osteogenic differentiation of human adipose-derived stem cells (hASCs) in vitro. hASCs were isolated from lipo-aspirates, and characterized by specific cell markers and multilineage differentiation capacity after culturing to the 3(rd) passage. PRP was collected and activated from human peripheral blood of the same patient. Cultured hASCs were treated with normal osteogenic inductive media alone (group A, control) or osteogenic inductive media plus 5%, 10%, 20%, 40%PRP (group B, C, D, E, respectively). Cell proliferation was assessed by CCK-8 assay. mRNA expression of osteogenic marker genes including alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN) and core binding factor alpha 1 (Cbfa1) were determined by Real-Time Quantitative PCR Analysis (qPCR). Data revealed that different concentrations of activated autologous PRP significantly promoted hASCs growth in the proliferation phase compared to the without PRP group and resulted in a dose-response relationship. At 7-d and 14-d time point of the osteogenic induced stage, ALP activity in PRP groups gradually increased with the increasing of concentrations of PRP and showed that dose-response relationship. At 21-d time point of the osteogenic induced stage, PRP groups make much more mineralization and mRNA relative expression of ALP, OPN, OCN and Cbfa1 than that without PRP groups and show that dose-response relationship. This study indicated that different concentrations of activated autologous PRP can promote cell proliferation at earlier stage and promote osteogenic differentiation at later stage of hASCs in vitro. Moreover, it displayed a dose-dependent effect of activated autologous PRP on cell proliferation and osteogenic differentiation of hASCs in vitro.

The development and evaluation of individualized templates to assist transoral C2 articular mass or transpedicular screw placement in TARP-IV procedures: adult cadaver specimen study.

OBJECTIVES: The transoral atlantoaxial reduction plate system treats irreducible atlantoaxial dislocation from transoral atlantoaxial reduction plate-I to transoral atlantoaxial reduction plate-III. However, this system has demonstrated problems associated with screw loosening, atlantoaxial fixation and concealed or manifest neurovascular injuries. This study sought to design a set of individualized templates to improve the accuracy of anterior C2 screw placement in the transoral atlantoaxial reduction plate-IV procedure. METHODS: A set of individualized templates was designed according to thin-slice computed tomography data obtained from 10 human cadavers. The templates contained cubic modules and drill guides to facilitate transoral atlantoaxial reduction plate positioning and anterior C2 screw placement. We performed 2 stages of cadaveric experiments with 2 cadavers in stage one and 8 in stage two. Finally, guided C2 screw placement was evaluated by reading postoperative computed tomography images and comparing the planned and inserted screw trajectories. RESULTS: There were two cortical breaching screws in stage one and three in stage two, but only the cortical breaching screws in stage one were ranked critical. In stage two, the planned entry points and the transverse angles of the anterior C2 screws could be simulated, whereas the declination angles could not be simulated due to intraoperative blockage of the drill bit and screwdriver by the upper teeth. CONCLUSIONS: It was feasible to use individualized templates to guide transoral C2 screw placement. Thus, these drill templates combined with transoral atlantoaxial reduction plate-IV, may improve the accuracy of transoral C2 screw placement and reduce related neurovascular complications.

The development and evaluation of individualized templates to assist transoral C2 articular mass or transpedicular screw placement in TARP-IV procedures: adult cadaver specimen study

OBJECTIVES: The transoral atlantoaxial reduction plate system treats irreducible atlantoaxial dislocation from transoral atlantoaxial reduction plate-I to transoral atlantoaxial reduction plate-III. However, this system has demonstrated problems associated with screw loosening, atlantoaxial fixation and concealed or manifest neurovascular injuries. This study sought to design a set of individualized templates to improve the accuracy of anterior C2 screw placement in the transoral atlantoaxial reduction plate-IV procedure. METHODS: A set of individualized templates was designed according to thin-slice computed tomography data obtained from 10 human cadavers. The templates contained cubic modules and drill guides to facilitate transoral atlantoaxial reduction plate positioning and anterior C2 screw placement. We performed 2 stages of cadaveric experiments with 2 cadavers in stage one and 8 in stage two. Finally, guided C2 screw placement was evaluated by reading postoperative computed tomography images and comparing the planned and inserted screw trajectories. RESULTS: There were two cortical breaching screws in stage one and three in stage two, but only the cortical breaching screws in stage one were ranked critical. In stage two, the planned entry points and the transverse angles of the anterior C2 screws could be simulated, whereas the declination angles could not be simulated due to intraoperative blockage of the drill bit and screwdriver by the upper teeth. CONCLUSIONS: It was feasible to use individualized templates to guide transoral C2 screw placement. Thus, these drill templates combined with transoral atlantoaxial reduction plate-IV, may improve the accuracy of transoral C2 screw placement and reduce related neurovascular complications. .

Application of three-dimensional model in the management of irreducible atlanto-axial dislocation.

OBJECTIVE: The aim of this study was to describe the application of the rapid prototyping (RP) life-size 3-dimensional model used to improve accuracy of screw insertion in irreducible atlanto-axial dislocation (IAD). METHODS: The study included 10 patients with IAD. All patients were assessed using the Japanese Orthopedic Association (JOA) score. Radiographs, MRI and CT were conducted during the preoperative and postoperative procedure. A 3D RP model was created for each patient. The model was used to obtain detailed information of each pedicle and used as an intraoperative reference. Assisted by the model, transoral atlanto-axial reduction plate fixation was performed in each case. RESULTS: The average operation time was 145 (range: 90 to 180) minutes and average blood loss was 120 (range: 60 to 250) ml. JOA scores improved after surgery. All 40 transoral pedicle/lateral mass screws were placed without serious complications or internal fixation failure. Postoperative radiographs and CT scan showed 38 transoral pedicle/lateral mass screws located in the pedicle tracts. Satisfactory reduction was achieved in 95% of screws. Two screws perforated the lateral wall of the C2 pedicles in an extremely narrow pedicle case. No neurologic sequelae or vertebral artery injury were detected. CONCLUSION: The RP technique is effective and reliable in achieving an accurate and safe screw insertion during IAD surgery, especially in anatomically abnormal cases.

Clinical application of computer-aided design-rapid prototyping in C1-C2 operation techniques for complex atlantoaxial instability.

STUDY DESIGN: This is a retrospective clinical study. OBJECTIVE: To evaluate the clinical efficacy of computer-aided design-rapid prototyping (CAD-RP) techniques in surgical treatments for atlantoaxial instability (AAI). SUMMARY OF BACKGROUND DATA: The complexity of the upper cervical anatomic structures makes the procedures for the treatment of AAI particularly challenging for surgeons. The present study represents a series of C1-C2 surgery for AAI aided by CAD-RP. METHODS: A total of 49 patients (21 men and 28 women) with AAI were treated in our department. According to the use of the CAD-RP technique, the patients were divided into RP group and No RP group. Preoperative CT scans of the upper cervical spine were performed for each patient. For the RP group, physical RP models of the upper cervical spine were manufactured from the 3-dimensional CT data and were used for intraoperative guidance. Personalized surgeries were performed for each case of the 2 groups. The screw malposition rate, frequency of using intraoperative fluoroscopy, operation time, blood loss, and improvement of neurological function were compared between the 2 groups. The mean follow-up duration was 32 months (range, 24-50 mo). RESULTS: The operations were successfully performed in 48 cases expect for 1 case in the No RP group. A total of 204 screws were placed. The intraoperative fluoroscopy frequency and operation time were significantly lower in the RP group than that in the No RP group in both posterior and anterior approaches, whereas the screw malposition rate showed no difference between the 2 groups for both approaches. After the operation, 48 cases achieved satisfactory decompression of the cervical cord and repositioning of the atlantoaxial spine. During follow-up, 47 cases presented improvements in the spinal nerve function within 2 years. CONCLUSIONS: CAD-RP techniques have significant benefits for surgeons providing personalized treatments for AAI, especially cases with complicated deformities.

Effect of ginsenoside Rg1 on proliferation and neural phenotype differentiation of human adipose-derived stem cells in vitro.

AIMS: To investigate whether ginsenoside Rg1 can promote neural phenotype differentiation of human adipose-derived stem cells (hASCs) in vitro. METHODS: hASCs were isolated from lipo-aspirates, and characterized by specific cell markers and multilineage differentiation capacity after culturing to the 3rd passage. Cultured hASCs were treated with neural inductive media alone (group A, control) or inductive media plus 10, 50, or 100 µg/mL ginsenoside Rg1 (groups B, C, and D, respectively). Cell proliferation was assessed by CCK-8 assay. Neuron specific enolase (NSE) and microtubule-associated protein-2 (MAP-2) levels were measured by Western blot. mRNA levels of growth associated protein-43 (GAP-43), neural cell adhesion molecule (NCAM), and synapsin-1 (SYN-1) were determined by real-time PCR. RESULTS: Ginsenoside Rg1 promoted the proliferation of hASCs (groups B, C, and D) and resulted in higher expression of NSE and MAP-2 compared with the control group. Gene expression levels of GAP-43, NCAM, and SYN-1 in the test groups were higher than that in thw control. The results displayed a dose-dependent effect of ginsenoside Rg1 on cell proliferation and neural phenotype differentiation. CONCLUSION: This study indicated that ginsenoside Rg1 promotes cell proliferation and neural phenotype differentiation of hASCs in vitro, suggesting a potential use for hASCs in neural regeneration medicine.

Osteogenic activity of silver-loaded coral hydroxyapatite and its investigation in vivo.

In this study, the scaffolds based on mineralized silver-loaded coral hydroxyapatites (SLCHAs) were developed for bone regeneration in the radius of rabbit with a 15-mm infective segmental defect model for the first time. The SLCHAs were achieved by surface adsorption and ion-exchange reaction between Ca(2+) of coral hydroxyapatite (CHA) and Ag(+) of silver nitrate with different concentration at room temperature. Release experiment in vitro, X-ray diffraction and scanning electron microscopy equipped with energy-dispersive X-ray spectrometer were applied to exhibit that the scaffold showed some features of natural bone both in main component and hierarchical microstructure. The three-dimensional porous scaffold materials imitate the microstructure of cancellous bone. Mouse embryonic pre-osteoblast cells (MC3T3-E1) were used to investigate the cytocompatibility of SLCHAs, CHA and pure coral. Cell activity were studied with alkaline phosphataseenzyme assay after 2, 4, 6 days of incubation. It was no statistically significant differences in cell activity on the scaffolds of Ag(+)(13.6 µg/mL)/CHA, Ag(+)(1.7 µg/mL)/CHA, CHA and pure coral. The results indicated that the lower silver concentration has little effect on cell activity. In the implantation test, the infective segmental defect repaired with SLCHAs was healed up after 10 weeks after surgery, and the implanted composites were almost substituted by new bone tissue, which were very comparable with the scaffold based on mineralized CHA. It could be concluded that the SLCHAs contained with appropriate silver ionic content could act as biocidal agents and maintain the advantages of mineralized CHA or coral, while avoiding potential bacteria-dangers and toxical heavy-metal reaction. All the above results showed that the SLCHAs with anti-infective would be as a promising scaffold material, which whould be widely applied into the clinical for bone regeneration.

Anterior pedicle screw fixation of C2: an anatomic analysis of axis morphology and simulated surgical fixation.

STUDY DESIGN: Human cadaveric study measuring the morphology of C2 vertebra, description of anterior placement of pedicle screw with post-fixation computed tomography (CT) analysis. OBJECTIVE: To assess the potential feasibility and safety anterior placement of C2 pedicle screws. SUMMARY OF BACKGROUND DATA: Posterior pedicle screw fixation has become an established technique for upper cervical reconstruction. To our knowledge few reports in the previous literature have described the placement of or anatomy related to anteriorly approach C2 pedicle screws. METHODS: The morphology of 60 human C2 vertebrae was measured directly to assess the size, position, and relative approach angle of the pedicles from an anterior perspective. In an additional 20 cadaveric cervical spines, bilateral 3.5 mm titanium C2 pedicle screws were placed and analyzed for pedicle morphology and placement accuracy with thin cut, 1 mm axial CT. RESULTS: The mean C2 pedicle width measured directly and by CT scan was 7.8 and 6.6 mm, and the average length of the right and left pedicle was 26.4 and 25 mm, respectively. The mean transverse angle (α) was 17.6° and 21.4°, whereas declination angle (ß) anterior to posterior was 13.8° and 10.6°, respectively. CONCLUSIONS: Quantitative data regarding C2 pedicle shape and location with respect to the anterior placement of pedicle screws have not been previously reported. This study indicates that anterior placement of 3.5 mm C2 pedicle screws through a transoral approach may be both feasible and safe and also provides an important anatomic analysis that may guide clinical application.

Unilateral versus bilateral fixation for lumbar spinal fusion: a systemic review and meta-analysis.

PURPOSE: The objective of this study was to systematically compare the efficacy and safety of unilateral fixation to bilateral fixation for the lumbar degenerative disease. STUDY DESIGN: Systematic review and meta-analysis. METHODS: We searched databases including PubMed Central, MEDLINE (from 1966), EMBASE (from 1980), and Cochrane Central Register of Controlled Trials databases for randomized controlled trials or non-randomized controlled trials that compare unilateral fixation with bilateral fixation for the treatment for lumbar disease. Exclusion criteria were non-controlled studies, follow-up <6 months, combined anterior and posterior surgery, lumbar tumors, and non-English writing paper. Methodologic quality was assessed, relevant data were retrieved, and the appropriate meta-analysis was performed. Two review authors independently selected studies, extracted data, and assessed the risk of bias. The main end points included the rate of fusion, visual analogue scale (VAS), Oswestry disability index (ODI), intra-operative blood loss, operating time, and the rate of complications. RESULTS: A total of seven studies were included in the meta-analysis. Four relevant randomized controlled trials, one prospective study, and two retrospective studies involving 499 patients were identified. Patients in unilateral pedicle fixation group compared with bilateral pedicle screw fixation group on the fusion rate, VAS, ODI scores, and complication rate demonstrated no significant differences (P > 0.05, respectively). However, intra-operative blood loss and operating time in unilateral fixation group were significantly less than bilateral fixation group (P < 0.0001, respectively). CONCLUSIONS: Unilateral fixation seems to be an effective, feasible, and safe procedure in one or two segmental disease when compare with bilateral instrumentation.

Human breast adipose-derived stem cells transfected with the stromal cell-derived factor-1 receptor CXCR4 exhibit enhanced viability in human autologous free fat grafts.

BACKGROUND: The main complication of autologous free fat tissue transplantation is fat resorption and calcification due to the ischemic necrosis of fat. The promotion of transplant neovascularization soon after autologous free fat grafts may reduce these outcomes. In adulthood, stromal cell-derived factor-1 (SDF-1) and its membrane receptor C-X-C chemokine receptor type 4 (CXCR4) are involved in the homing and migration of multiple stem cell types, neovascularization, and cell proliferation. We hypothesized that CXCR4 may improve the long-term survival of free fat tissue transplants by recruiting endothelial progenitor cells (EPCs) and may therefore improve graft revascularization. In this study, we aimed to determine the effect of human breast adipose-derived stem cells (HBASCs) transfected with the CXCR4 gene on the survival rate of human autologous free fat transplants in nude mice. METHODS: Human breast adipose-derived stem cells (HBASCs) were expanded ex vivo for 3 passages, labeled with green fluorescent protein (GFP) and transfected with CXCR4 or left untransfected. Autologous fat tissues were mixed with the GFP-labeled, CXCR4-transfected HBASCs (group A), GFP-labeled HBASCs (group B), the known vascularization-promoting agent VEGF (group C), or medium (group D) and then injected subcutaneously into 32 nude mice at 4 spots in a random fashion. Six months later, the transplanted tissue volume and histology were evaluated, and neo-vascularization was quantified by counting the capillaries. CXCR4 and SDF-1α mRNA expression in the transplants was determined using real-time quantitative PCR analysis (qPCR). RESULTS: The data revealed that the control (group D) transplant volume survival was 28.3 ± 4.5%. Mixing CXCR4-transfected (group A) and untransfected (group B) HBASCs significantly increased transplant volume survival (79.5 ± 8.3% and 67.2 ± 5.9%, respectively), whereas VEGF-transfected HBASCs (group C) were less effective (41.2 ± 5.1%). Histological analysis revealed that both types of HBASCs-treated transplants consisted predominantly of adipose tissue, unlike the control transplants, and also presented significantly less fat necrosis and fibrosis. The CXCR4-transfected HBASCs-treated transplants had a significantly higher capillary density than did the other transplants and showed GFP and CD31 double-positive cells (i.e., ASCs-derived endothelial cells). The mRNA expression of CXCR4 and SDF-1α was much higher in the CXCR4-transfected HBASCs transplants than in the other three transplants. CONCLUSIONS: Our data demonstrated that HBASCs can enhance the survival and quality of transplanted free fat tissues. Moreover, CXCR4 transfection of these HBASCs could augment this effect. Stimulation of angiogenesis and decreased fat cell apoptosis due to the recruitment of endothelial progenitor cells (EPCs) and an increase in graft revascularization are potential mechanisms underlying the improved long-term survival of free fat transplants following CXCR4-transfected HBASCs treatment.

Stimulation of osteogenic differentiation in stromal cells of giant cell tumour of bone by zoledronic acid.

Therapeutic effects of zoledronic acid (ZOL) on giant cell tumour of bone (GCT) have been proven. Apoptosis induction was considered to be one of the mechanisms of ZOL tumour inhibition. In this study, we presented the possibility of an osteogenic differentiation stimulation mechanism of ZOL and further investigated dosage and time effects. We treated stromal cells of GCT (GCTSC) with ZOL for 48 hours at different concentrations (0 µM, 0.01 µM, 0.1 µM, 1 µM, 5 µM, 30 µM) and assessed apoptotic and osteogenic differentiation markers with immunohistochemical techniques and real-time quantitative RT-PCR. Our results suggested that ZOL enhanced mRNA expression of Cbfa-1, osterix and osteocalcin genes with a maximum effect at 1 µM in GCTSC. Time course experiments indicated a time dependent osteogenic differentiation effect. In conclusion, ZOL may be considered as an adjuvant in the treatment of GCT not only by inducing apoptosis but also by stimulating osteogenic differentiation of remaining tumor stromal cells after surgery.

Postoperative irrigation with bisphosphonates may reduce the recurrence of giant cell tumor of bone.

Giant cell tumor of bone (GCTB) is a common benign bone tumor characterized by local osteolysis and high proclivity for recurrence. Surgical excision is the preferred treatment. However, simple wide resection may cause functional and cosmetic deformities of the skeleton. Currently, intralesional curettage with adjuvant therapy is a popular treatment. Bisphosphonates are recommended as an effective adjuvant treatment, and their antitumor effects have been proved in laboratory studies. During clinical treatment, intravenous and peroral administration of bisphosphonates has been attempted and has been successful in reducing the tumor recurrence rate. However, the use of bisphosphonates in GCTB adjuvant therapy requires additional study. Irrigation is a classic method for focal clearance after surgery. Therefore, we hypothesize that postoperative irrigation with bisphosphonates may be a safe and effective treatment for GCTB. The efficacy and safety of this method are worthy of further investigation.

Morphological character of cervical spine for anterior transpedicular screw fixation.

BACKGROUND: Anterior cervical interbody grafts/cages combined with a plate were frequently used in multilevel discectomies/corpectomies. In order to avoid additional posterior stabilization in patients who undergo anterior reconstructive surgery, an anterior cervical transpedicular screw fixation, which offers higher stability is desirable. We investigated in this study the anatomical (morphologic) characters for cervical anterior transpedicular screw fixation. MATERIALS AND METHODS: Left pedicle parameters were measured on computed tomography (CT) images based on 36 cervical spine CT scans from healthy subjects. The parameters included outer pedicle width (Distance from lateral to medial pedicle surface in the coronal plane), outer pedicle height (OPH) (Distance from upper to lower pedicle surface in the sagittal plane), maximal pedicle axis length (MPAL), distance transverse insertion point (DIP), distance of the insertion point to the upper end plate (DIUP), pedicle sagittal transverse angle (PSTA) and pedicle transverse angle (PTA) at C3 to C7. RESULTS: The values of outer pedicle width and MPAL in males were larger than in females from C3 to C7. The OPH in males was larger than in females at C3 to C6, but there was no difference at C7. The DIP and PTA were significantly greater in males than in females at C3, but there was no difference in the angle at C4-7. The PSTA was not statistically different between genders at C3, 4, 7, but this value in males was larger than females at C5, 6. The DIUP was significantly greater in males at C3, 4, 6, 7 but was non significant at C5. CONCLUSIONS: The placement of cervical anterior transpedicular screws should be individualized for each patient and based on a detailed preoperative planning.

Inhibition of fatty acid synthase suppresses osteosarcoma cell invasion and migration via downregulation of the PI3K/Akt signaling pathway in vitro.

In the present study, the effect of fatty acid synthase (FASN) inhibition on cell invasion and migration in vitro was investigated. A recombinant plasmid containing a microRNA targeting the FASN gene was used to inhibit FASN expression in U2­OS cells. Cell migration and invasion were investigated using wound healing and Transwell invasion assays. We found that cell invasion and migration were suppressed by inhibiting FASN. In addition, the effect of inhibition of FASN on phosphorylation of Akt was investigated by detecting the expression levels of pAkt using western blot analysis. Furthermore, protein expression levels of nuclear factor­κB (NF­κB; p65) and matrix metalloproteinase (MMP)­2 and ­9 were also measured by western blot analysis. Results demonstrated that expression levels of pAkt, NF­κB (p65) and MMP­2 and ­9 proteins were reduced significantly by inhibiting FASN. Therefore, we confirmed that inhibition of FASN by RNA interference suppresses osteosarcoma cell metastasis via downregulation of the phosphoinositide 3­kinase/Akt/NF­κB signaling pathway in vitro.