RESUMO
PURPOSE: The sacral alar-iliac screw (SAIS) fixation technique has evolved from spinopelvic fixation which originated from S2AIS to sacroiliac joint fixation, with more reports regarding its application of S2AIS than S1AIS. However, there is a lack of comparative evidence to determine which technique is superior for sacroiliac joint fixation. This study aimed to determine which of the screws was superior in terms of implantation safety and biomechanical stability for sacroiliac joint fixation. METHODS: CT data of 80 normal pelvises were analyzed to measure the insertable range, trajectory lengths and widths of both S1AIS and S2AIS on 3D reconstruction models. Φ 6.5 mm and 8.0 mm screws were implanted on the left and right sides of fifty 3D printed pelvic models respectively to observe for breach of screw implantation. Ten synthetic pelvis models were used to simulate type C Tile injuries, and divided into 2 groups with an anterior plate and posterior fixation using one S1AIS or S2AIS on each side. The stiffness and maximum load of the plated and fixated models were measured under vertical loading. RESULTS: The trajectory lengths and widths of the S1AIS and S2AIS were similar (p > 0.05) and there was no breach for Φ 6.5 mm SAIS. However, both the insertable range and trajectory length on the sacral side of S2AIS (234.56 ± 10.06 mm2, 40.97 ± 2.81 mm) were significantly less, and the breach rate of the posterior lateral cortex of the Φ 8.0 mm S2AIS (46%) was significantly higher than the S1AIS (307.55 ± 10.42 mm2, 42.16 ± 3.06 mm, and 2%, p < 0.05). The stiffness and maximum load of S2AIS were less than S1AIS but the difference was not statistically significant (p > 0.05). CONCLUSION: S1AIS and S2AIS have similar screw trajectories and stability. However, S1AIS has a larger insertable range, less breach of the posterior lateral sacral cortex and longer trajectory length on the sacral side than S2AIS, which indicates S1AIS has higher implantation safety and a trend of better mechanical performance over S2AIS for sacroiliac joint fixation. Furthermore, S2AIS with an excessively large diameter should be used with caution for sacroiliac joint fixation.
RESUMO
BACKGROUND: Generalized distal radius die-punch fractures (GDP) can involve three columns. However, there is no three-column classification for GDP. The aim of this study was to introduce a three-column classification for GDP, and to investigate the application effect of the classification. METHODS: 613 patients with GDP accrued from January 2013 to December 2021 were classified by column and fracture type based on imaging findings. First, the GDP was categorized into single-, double-, or three-column fractures. Second, the intermediate column fractures were divided into volar, dorsal, split, collapse, or mixed types; the radial column fractures were divided into metaphyseal, articular or mixed types; and the ulnar column fractures were divided into apical or basal types of the styloid process. The intra- and inter-observer consistency between the two assessors was analyzed with kappa statistics. 227 patients with less fracture displacement were treated conservatively, whereas 386 patients with increased fracture displacement were treated surgically, and the selection of surgical approaches and fracture reduction-fixation methods was guided by the classification. The differences in incidence, gender, age, treatment methods, and functional recovery were compared among the three categories, and the characteristics of different types were observed. The wrist joint function was evaluated according to the Sarmiento-modified Gartland- Werley method. RESULTS: The intra- and the inter-observer kappa coefficients were obtained as ≥ 0.810. There were significant differences in the incidence (12.7%, 68.5%, and 18.8%, respectively) and age (39.8, 46.6, and 47.1 years, respectively) for single-, double- and three-column fractures (P<0.05). However, there was no significant difference in terms of gender among the three (P>0.05). The mixed, collapse, split, dorsal, and volar types accounted for 28.7%, 27.7%, 21.9%, 15.5%, and 4.5%, respectively. The metaphyseal, articular surface, and mixed types accounted for 35.9%, 33.1%, and 31.0%, respectively. The apical and base types were 81.7% and 18.3%, respectively. Among the cases of volar and dorsal types, the missed diagnosis rate of X-ray alone was 28.5%, but it was confirmed by subsequent CT. In the last follow-up of 12.2 months (range, 6 to 24 months), the excellent plus good rate was 82.7% and 82.6%, respectively, in total and among patients undergoing surgical treatment; the excellent plus good rate of the single column fractures was 96.2%, significantly higher than that of double- and three-column fractures (80.0% and 83.5%, respectively) (P<0.05). All patients with fair or poor wrist function had collapse or mixed-type intermediate column fractures. CONCLUSION: Different categories/types of GDP have significant differences in terms of incidence, age, efficacy, and prognosis. Imaging classification by column and type of GDP better reflects the features and injury mechanism of the fractures with good consistency. Therefore, it has important reference value for the surgical modality and prognosis evaluation.
RESUMO
BACKGROUND: Masquelet's induced membrane (IM) has osteogenesis activity, but IM spontaneous osteogenesis (SO) has not been described previously. OBJECTIVES: To report on varying degrees of IMSO and analyze its possible causes. METHODS: Twelve eight-week-old male Sprague-Dawley rats with 10 mm right femoral bone defects who received the first stage of IM technique (IMT) were used to observe the SO. In addition, clinical data from patients with bone defects who received the first stage of IMT with an interval of > 2 months post-operatively and exhibited SO between January 2012 and June 2020 were retrospectively analyzed. The SO was divided into four grades according to the amount and characteristics of the new bone formation. RESULTS: At twelve weeks, grade II SO was observed in all rats, and more new bone was formed in the IM near the bone end forming an uneven margin. Histology revealed bone and cartilage foci in the new bone. Four of the 98 patients treated with the first stage of IMT exhibited IMSO, including one female and three males with a median age of 40.5 years (range 29-52 years). The bone defects were caused by severe fractures and infection in two cases and by infection or tumor in one case each. Partial or segmental defects occurred in two cases. The time interval between inserting a cement spacer and diagnosis of SO ranged from six months to nine years. Two cases were grade I, and one case each of grades III and IV. CONCLUSION: Varying degrees of SO confirm the existence of the IMSO phenomenon. Bioactive bone tissue or local inflammation and a long time interval are the primary reasons underlying enhancement of the osteogenic activity of IM and leading to SO, which tends to take place as endochondral osteogenesis.
Assuntos
Fraturas Ósseas , Osteogênese , Ratos , Masculino , Feminino , Animais , Ratos Sprague-Dawley , Estudos Retrospectivos , Fêmur/diagnóstico por imagem , Fêmur/cirurgiaRESUMO
PURPOSE: To explore the optimal insertion positions of anterior-posterior orientation sacroiliac screw (AP-SIS). METHODS: Pelvic CT data of 80 healthy adults were employed to measure the anatomical parameters including the insertable ranges of S1 and S2, the length, width and height of the channel with three different horizontal and vertical anterior insertion points starting from the ilium-acetabular recess. To compare pelvic stability by replicating a type C Tile lesions, fifteen synthetic pelvises were fixed with an anterior plate and a posterior AP-SIS employing different anterior insertion points, the whole specimen displacements and shifts in the sacroiliac gap under a cyclic vertical load of 300 N in a biomechanical machine recorded. RESULTS: The posterior and anterior insertable ranges averaged 17.9 × 8.5mm2 and 47.1 × 21.2 mm2, respectively. The channel lengths for three horizontal anterior insertion points gradually decreased from front to back with significant difference (p < 0.05), whereas the width and height for three horizontal anterior insertion points and the parameters for the three vertical anterior insertion points were similar (p > 0.05). The displacements and shifts for three horizontal insertion points gradually increased from front to back (p < 0.05) whereas the measurements involving the three vertical insertion points were similar (p > 0.05). CONCLUSION: The posterior insertable range is small, where the center between adjacent nerve roots (foramens) is the optimal posterior insertion point. The anterior insertable range is large, where the iliac-acetabular recess is the optimal anterior insertion point for S1 and S2, providing the longest channel and best stability.
Assuntos
Ílio , Sacro , Adulto , Humanos , Sacro/cirurgia , Ílio/diagnóstico por imagem , Ílio/cirurgia , Parafusos Ósseos , Fixação Interna de Fraturas , AcetábuloRESUMO
PURPOSE: The outlet of the classic sacroiliac screw (SIS) cannot be precisely controlled by aiming devices, which may lead to malpositioned implants and neurovascular and visceral injury. This study aimed to radio-anatomically measure the parameters of the channel for anterior-posterior placement SIS (AP-SIS), which can be placed percutaneously with an aiming device. METHODS: Pelvic CT scan data of 80 healthy adults (40 males and 40 females) with an average age of 45 years (range 20-70 years) were collected. The length (L), width (W), height (H), cortical bone spacing (M), camber angle (E), anteversion angle (F), cross-sectional safety angle (P) and sagittal safety angle (Q) of the channel were measured by CT or Mimics software. RESULTS: The L, W, H, M, E, F, P and Q measures of S1 were 109.2 ± 8.0 mm, 18.5 ± 1.9 mm, 21.7 ± 1.7 mm, 8.1 ± 0.4 mm, 44.2 ± 3.2°, 42.4 ± 3.6°, 16.8 ± 1.1°, and 19.4 ± 2.0°, respectively, for S1, and 113.5 ± 9.4 mm, 18.2 ± 1.5 mm, 21.7 ± 1.7 mm, 7.7 ± 0.4 mm, 44.7 ± 3.2°, 31.2 ± 2.7°, 13.8 ± 1.0° and 15.4 ± 1.4°, respectively, for S2. Of the L measures, the intra-iliac segment was slightly longer than the intra-sacral segment. All parameters showed significant sex-related differences (p < 0.05). CONCLUSION: The AP-SIS channels of S1-2 have sufficient width and length to accommodate a cancellous screw with a Φ 7.0-8.0 mm and a length 90-130 mm. The intra-iliac segment is a long channel screw with better mechanical properties over classic SIS.
Assuntos
Parafusos Ósseos , Fusão Vertebral , Adulto , Idoso , Estudos Transversais , Feminino , Fixação Interna de Fraturas , Humanos , Ílio/cirurgia , Masculino , Pessoa de Meia-Idade , Sacro/diagnóstico por imagem , Sacro/cirurgia , Adulto JovemRESUMO
BACKGROUND: There were two ways of preparing the cement spacer: intracorporeal and extracorporeal formation. This study aimed to investigate the outcomes of extracorporeal vs. intracorporeal formation of a spacer using the induced membrane technique (IMT) for repairing bone defects of the tibia. METHODS: Sixty-eight patients with tibial defects treated with IMT were analyzed retrospectively. According to the mode of bone cement preparation, patients were divided into intracorporeal and extracorporeal groups (36 vs. 32 respectively). All patients were followed up for 12-48 months (average 18.7 months). The time interval between the first and second stages, the time required to remove the spacer, injury of the IM or bone ends, bone healing and infection control, as well as the functional recovery (Johner-Wruhs scoring), were compared. RESULTS: There was no significant difference in the preoperative data between the two groups (P > 0.05). There was no significant difference in the time interval (12.64 ± 4.41vs. 13.22 ± 4.96 weeks), infection control (26/28 vs. 20/23), bone healing time (7.47 ± 2.13vs. 7.50 ± 2.14 mos), delayed union (2/36 vs. 2/32), nonunion (2/36 vs. 1/32), an excellent or good rate of limb functional recovery (30/36 vs. 26/32) between the intracorporeal and extracorporeal groups (P > 0.05). However, the time required to remove (3.97 ± 2.34 min) was longer and the injury of IM or bone ends (28/36) was greater in the intracorporeal group than those in the extracorporeal group (0.56 ± 0.38 min and 1/32, respectively), showing a significant difference (P < 0.05). CONCLUSION: Both approaches were shown to have similar effects on bone defect repair and infection control. However, intracorporeal formation had advantages in terms of additional stability, while extracorporeal formation had advantages in terms of removal. Therefore, the specific method should be selected according to specific clinical needs. We recommended the extracorporeal or the modified extracorporeal formation in most cases.
Assuntos
Procedimentos de Cirurgia Plástica , Tíbia , Cimentos Ósseos/uso terapêutico , Humanos , Estudos Retrospectivos , Tíbia/diagnóstico por imagem , Tíbia/cirurgia , Resultado do TratamentoRESUMO
BACKGROUND: The exit point of classic iliosacral screw (ISS) is deep and viewing device cannot be used, implantation of ISS may lead to malposition and nerve injury. OBJECTIVE: The aim of this study is to explore the effect of ISS implanted through a new channel (NSIS) with the aid of a viewing device. METHODS: With the aid of a viewing device, NISSs were implanted into 50 3D printed pelvis models (1:1), in which the entry point was located at a vertical distance of 6 mm from the middle of the superior posterior quarter of the acetabular rim, and the exit point was the intersection of the vertical extension line of S1 superior articular process and the horizontal median line of S1 transverse process. Screws with diameter of 6.5 mm and 7.3 mm and length of 90 mm were implanted into the left and right sides of the pelvic models, respectively. The implantation was observed. CT scan was performed when penetrating of channel was suspected. RESULTS: None of the implanted screws perforated the tunnel, but 6.0% (3 models) of the screws were too long and a little bit penetrated (< 4 mm) behind the back of the tunnel, which was found in small models. CONCLUSION: The NISS implantation is simple, safe and accurate, but individualized screw implantation with appropriate diameter and length should be more accurate. TRIAL REGISTRATION NUMBER: WXSJY-LY-2020-00216, date of registration: June 5, 2020, retrospectively registered.
RESUMO
OBJECTIVE: To examine the imaging evidence of the use of percutaneous compression plate (PCCP) in promoting femoral neck fracture healing compared with cannulated screws (CS). METHODS: This retrospective study enrolled patients with femoral neck fractures undergoing internal fixation procedures. The patients were divided into a PCCP group and a CS group with imaging as the primary outcome and Harris hip score (HHS) as the secondary outcome. RESULTS: This study included 162 patients: 80 in the PCCP group and 82 in the CS group. There were no significant differences between the patients in their preoperative baseline characteristics. Patient follow-up ranged from 24-56 months (mean 30.7 months). Differences in reduction quality, screw slipping, neck shortening and avascular necrosis (AVN) were not significant between the two groups. There were significant differences between the treatment groups in bone absorption, nonunion, healing time, screw withdrawal and fixation failure in favour of the PCCP group. Postoperative HHS at 6 and 12 months were significantly better for the PCCP group than the CS group, but the differences were not significant at 24 months and last follow-up. CONCLUSION: Stable internal fixation with dynamic compression was the key to PCCP promoting femoral neck fracture healing.
Assuntos
Fraturas do Colo Femoral , Placas Ósseas , Fraturas do Colo Femoral/diagnóstico por imagem , Fraturas do Colo Femoral/cirurgia , Fixação Interna de Fraturas , Consolidação da Fratura , Humanos , Estudos Retrospectivos , Resultado do TratamentoRESUMO
BACKGROUND: The induced membrane technique (IMT) is an effective strategy to repair bone defects and involves a two-stage set of surgical procedures. Although the IM has osteogenic activity, bone grafting is necessary in standard IMT. Bone defects repaired completely by osteogenic activity of the IM alone without bone grafts are rare. CASE PRESENTATION: We present a case of infected fractures and bone defects of the ulna and radius treated with IMT. After the first stage using polymethylmethacrylate (PMMA) beads, X-rays showed that new callus developed after 2 to 4 months, and the defects were repaired completely by 5 months. We also present a literature review on spontaneous osteogenesis of the IM in patients. CONCLUSIONS: We present a case of infected ulnar and radial bone defects that healed by 5 months after the first stage of the IMT using a PMMA spacer. This finding suggests that local associated inflammatory reactions and bone tissue might enhance the osteogenic activity of the IM, causing spontaneous healing of bone defects. This appears to be the first such case reported in the literature.
Assuntos
Osteogênese , Ulna , Transplante Ósseo , Humanos , Polimetil Metacrilato , Rádio (Anatomia)RESUMO
BACKGROUND: Retraction of transporting bone segment (TBS) may occur when the fixator of the TBS is removed prior to full consolidation of the distracted callus, which has adverse effect on the healing of the docking site. However, there are few reports on the retraction of TBS. The purpose of this study is to analyze the causes and risk factors of the retraction of TBS. METHODS: The clinical data of 37 cases with tibial bone defect treated by Ilizarov bone transport were analyzed retrospectively, in whom the TBS fixator was removed prior to full consolidation of the distracted callus and union of the docking site. Bivariate correlation was used to analyze relationship between the retraction distance of TBS and potential risk factors including age, gender, course, length of bone defect, number of operations, size of TBS, transport distance, timing and time interval of removal of TBS fixator. Risk factors with significant level were further identified using multivariate linear regression. RESULTS: Bivariate correlation showed that the timing of removal was negatively correlated with the retraction distance, and the time interval and transport distance were positively correlated with the retraction distance(p < 0.05), the age, gender, course, length of bone defect, size of TBS and number of operations were not correlated with the retraction distance(p > 0.05). Multivariate linear regression of the 3 risk factors showed that the timing of removal and time interval were the main risk factors affecting the retraction distance (p < 0.05), but the transport distance was not (p > 0.05). CONCLUSION: The traction forces of TBS endured from the soft tissues and the unconsolidated distracted callus have elastic properties, which can make retraction of TBS. The timing of removal and time interval are the main risk factors of the retraction of TBS. In the case of early removal, another external fixation or quickly converted to internal fixation should be performed to avoid the adverse effect of more retraction.
Assuntos
Técnica de Ilizarov , Fraturas da Tíbia , Fixadores Externos , Humanos , Estudos Retrospectivos , Tíbia , Resultado do TratamentoRESUMO
BACKGROUND: The aim of this study was to evaluate the influence of obesity on patients' function, pain, and complications following primary total knee arthroplasty (TKA) with an enhanced-recovery program. METHODS: A total of 157 patients were enrolled into a prospective study and assigned into one of three groups on the basis of their body mass index (BMI): normal (BMI 18.0-24.9â¯kg/m2), overweight (BMI 25.0-29.9â¯kg/m2), or obese (BMI ≥30.0â¯kg/m2). The primary outcome was knee range of motion (ROM) on postoperative day (POD) 3, 15, 30, and 90, and secondary outcomes were visual analog scale (VAS) on POD 1, 2, 3, 15, 30, and 90, length of stay, and complications. RESULTS: The ROM of patients in the obese group on POD 3 was higher than in the normal (104.4⯱â¯8.5 vs. 98.9⯱â¯8.9, Pâ¯=â¯.010) and overweight (104.4⯱â¯8.5 vs. 97.7⯱â¯7.8, Pâ¯=â¯.001) groups. Similarly, the VAS in the obese group at rest on POD 1 was lower than in the normal (2.0⯱â¯0.7 vs. 2.2⯱â¯0.6, Pâ¯=â¯.043) and overweight (2.0⯱â¯0.7 vs. 2.3⯱â¯0.6, Pâ¯=â¯.010) groups. In addition, the incidence of complications did not differ significantly among the three groups, but the length of hospital stay in the obese group was longer (Pâ¯=â¯.027). CONCLUSIONS: Obesity may not affect patients' function and pain, and may not increase the incidence of complications following primary TKA. Obese patients may obtain satisfactory functional rehabilitation outcomes, but with a longer duration of rehabilitation.
Assuntos
Artroplastia do Joelho , Obesidade/complicações , Osteoartrite do Joelho/complicações , Osteoartrite do Joelho/cirurgia , Idoso , Índice de Massa Corporal , Feminino , Humanos , Tempo de Internação , Masculino , Pessoa de Meia-Idade , Estudos Prospectivos , Amplitude de Movimento Articular , Resultado do TratamentoRESUMO
BACKGROUND: There are no reports on the similarities and differences between induced membrane (IM) technique and wrap bone graft(WBG) technique. OBJECTIVE: The aims of this study are to investigate the effects of IM technique and WBR technique in repairing segmental bone defects, and to analyze the similarities and differences between them. MATERIALS AND METHODS: 66 patients of tibial segmental bone defects treated by IM technique and WBG technique were retrospectively analyzed. Aged 13-69 years old with an average of 35.3 years old. IM technique was divided into early IM group (bone grafting at 6-8 weeks of bone cement filling) and late IM group (bone grafting after 8 weeks of bone cement filling). WBG was divided into titanium mesh group and line suturing cortical bone blocks group. There were 11 cases, 25 cases, 10 cases and 20 cases in the early IM group, late IM group, titanium mesh group and line suturing group, respectively. Bone healing, complications and functional recovery (Paley's method) were observed, the causes of nonunion and delayed union and factors affecting bone healing were analyzed. RESULTS: There were no significant differences in terms of age, sex, defect length, course, fixation method, defect location and preoperative function of adjacent joints among the 4 groups. All patients were followed up for 12-50 months, with an average of 20.1 months. The clinical healing time of early IM group, late IM group, titanium mesh group and line suturing group were (5.81 ± 0.75) months, (7.56 ± 1.66) months, (7.50 ± 0.70) months and (7.81 ± 1.81) months, respectively, showing significant differences among the 4 groups (P = 0.005). However, only early IM group had significant difference with other groups (P < 0.05), while no significance was found between late IM group and WBR group, between titanium mesh group and suture group (P > 0.05). There were no significant differences in healing ration, complications and functional recovery of adjacent joints among the 4 groups (P > 0.05). There were 4 cases of nonunion and delayed union, all of which were caused by poor quantity or quality of bone graft or unstable bone graft or internal fixation. CONCLUSION: Both IM technique and WBG technique are effective method for repairing segmental bone defects. In addition to mechanical encapsulation, early IM has biological osteogenesis. However, mechanical encapsulation is a common basis for repairing bone defects, and biological osteogenesis can enhance bone healing.
RESUMO
The present study aimed to classify double-column die-punch fractures of the distal radius according to imaging data, and to evaluate their clinical features. A retrospective analysis of imaging data derived from 498 patients diagnosed with a double-column die-punch fracture of the distal radius was performed. The fractures were divided into those with middle-column avulsion with fracture of the radial-column articular surface (type I), those with middle-column collapse with fracture of the radial-column articular surface (type II), those with middle-column collapse with fracture of epiphysis of the radial column (type III) or mixed-type fractures (type IV). The intra- and inter-observer consistency between assessors was analyzed with kappa statistics. The patients with double-column die-punch fractures of the distal radius were followed up. There were 21 cases of type I fracture, 135 cases of type II fracture, 130 cases of type III fracture and 212 cases of type IV fracture. The intra-observer kappa coefficient ranged from 0.810-0.861, whereas the inter-observer kappa coefficient range was 0.830-0.876, with high consistency. Following 13 months of follow-up, the patients were assessed for functional recovery of the wrist and hand using the Gartland-Werley scoring system. The analysis indicated that in 95.78% of the patients, wrist function was rated as excellent or good (n=477), while in 4.22% of patients it was rated as fair (n=21), mainly due to the development of post-traumatic arthritis of the wrist following inappropriate therapy. All of the cases were type IV and type III fractures. These data demonstrated the application of a novel classification system named the Three-Column Classification, used to classify double-column die-punch fractures of the distal radius. This method reflected the mechanisms and severity of the fractures, conforming to the principle of AO fracture classification. Furthermore, it exhibited high consistency and may provide reference values for clinical diagnosis, treatment and prognostic evaluation.
RESUMO
Activation of the P2X7 receptor (P2X7R) has been found to increase expression of tumor necrosis factor-α (TNF-α) in the joints and synovial lining of patients with rheumatoid arthritis (RA). Increased expression of TNF-α promotes joint destruction through deterioration of type II collagen by matrix metalloproteinases (MMPs), expression of proinflammatory cytokines, oxidative stress, and activation of cellular signaling pathways. In the present study, we exposed fibroblast-like synoviocytes (FLSs) to TNF-α in the presence and absence of the P2X7R antagonist A804598. We then employed real time PCR and western blot analysis to analyze the mRNA and protein expression levels of P2X7R in both control and RA-FLSs. We confirmed that P2X7R is expressed on FLSs and is upregulated in RA-FLSs and FLSs exposed to TNF-α. Importantly, we also demonstrate the ability of P2X7R antagonism using A804598 to suppress oxidative stress, expression of interleukin (IL)-1ß, IL-6, MMP-1, MMP-3, MMP-13 as well as activation of the Janus family of tyrosine kinase/signal transducer and activator of transcription (JAK1/STAT3) proinflammatory signaling pathway. These findings implicate a novel role of antagonism of P2X7R as a target for the treatment and prevention of RA.
RESUMO
BACKGROUND: The aims of this study were to discuss the principle, therapeutic effect and influencing factors of multiple wrapped cancellous bone graft methods for treatment of segmental bone defects. METHODS: This study retrospectively analyzed the therapeutic effect of different wrapped autologous cancellous bone graft techniques on 51 patients aged (34.5 ± 11.5) years with segmental bone defects. Cancellous bones were wrapped with titanium mesh (n = 9), line mesh (n = 10), line suturing or line binding cortical block, (n = 13), or induced membrane (n = 19). The bone defeats were as follows: tibia (n = 23), radial bone (n = 10), humerus (n = 8), ulnar bone (n = 7), and femur (n = 3). The defect lengths were (5.9 ± 1.1) cm. The functionary recovery of adjacent joint was evaluated by the Paley's method and DASH, respectively. RESULTS: The incision healed by first intention in 48 cases and secondary healing in 3 cases. All patients were followed up for 19.1 ± 7.1 (12-48) months. Other than one patient with nonunion who received a secondary bone graft, all the patients were first intention of bone healing (the healing rate was 98.0%). The healing time was 6.1 ± 2.1 (3-15) months. There were no significant differences in the healing time among the 4 groups (χ2 = 1.864, P = 0.601). The incidence of complications in the grafted site was 11.8%, whereas it was 21.6% in the harvest site. At the last follow-up, all the patients had recovered and were able to engage in weight-bearing activities. The functional recovery was good to excellent in 78.4% of cases, there were no significant difference among the 4 groups (χ2 = 5.429, P = 0.143). CONCLUSIONS: Wrapped cancellous bone grafting is a modified free bone graft method that can be used in the treatment of small and large segmental bone defects as it prevents loosening and bone absorption after bone grafting. The effect of bone healing is related with the quality and quantity of grafted bone, stability of bone defects, property of wrapping material and peripheral blood supply.
Assuntos
Transplante Ósseo/métodos , Osso Esponjoso/transplante , Fraturas Ósseas/cirurgia , Telas Cirúrgicas , Adolescente , Adulto , Idoso , Transplante Ósseo/instrumentação , Osso Esponjoso/lesões , Estudos de Viabilidade , Feminino , Seguimentos , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Transplante Autólogo/instrumentação , Transplante Autólogo/métodos , Resultado do Tratamento , Adulto JovemRESUMO
PURPOSE: This study proposed to access the clinical outcome of avulsion fractures around joints of extremities using the hook plate. METHODS: A total of 60 patients with avulsion fractures of joints admitted in our hospital between January 2011 and June 2016 were performed the surgery of hook plate fixation. Functional recovery was evaluated using the Lysholm knee score, Kaikkonen ankle injury score, Mayo elbow and wrist function score, and Neer shoulder function score. RESULTS: All the patients were healed within 3 months after surgery with stage I healing incision without vascular or nerve injuries. The average follow-up period was 18.1 months. At the last follow-up, no instability of joints, looseness of internal fixation or traumatic arthritis was observed. Mild joint fibrosis occurred in 5 cases. A total of 57 patients were well recovered with the excellent and good rate of 95%. Three patients with humeral avulsion fracture of the greater tuberosity had shoulder joint adhesion and peri humeral inflammation at the last follow-up due to the poor cooperation for early rehabilitation exercise. In the last follow-ups, the functional score of the affected limb was markedly greater than that in the 3-month follow-ups (p < 0.05). CONCLUSION: Hook plate fixation has the therapeutic effect on treating avulsion fractures around joints of extremities with the advantages of reliable fixation, early rehabilitation after operation, high recovery rates of joint function, wide indications, and convenient uses.
Assuntos
Placas Ósseas , Fixação Interna de Fraturas/instrumentação , Fratura Avulsão/cirurgia , Recuperação de Função Fisiológica , Adulto , Idoso , Extremidades , Feminino , Seguimentos , Fixação Interna de Fraturas/efeitos adversos , Fratura Avulsão/complicações , Humanos , Instabilidade Articular/epidemiologia , Instabilidade Articular/etiologia , Articulações , Masculino , Pessoa de Meia-Idade , Amplitude de Movimento Articular , Resultado do Tratamento , Adulto JovemRESUMO
OBJECTIVE: To evaluate the clinical efficacy of operation methods with or without a turned-over patella for treatment of C3-type patellar fractures. METHODS: A total of 68 patients with C3-type patellar fractures undergoing open reduction and internal fixation were retrospectively selected and treated with a turned-over patella surgery (turned-over patella group, n = 30) or conventional therapy without turning over the patella (conventional group, n = 38). The intraoperative and postoperative indicators of the two groups were assessed and comparatively analyzed. RESULTS: The bedridden time was significantly shorter in the turned-over patella group than in the conventional group (P = 0.002), while the range of motion (ROM) of knee joint was significantly higher in the turned-over patella group (P = 0.044). The Lysholm score was slightly higher in the turned-over patella group than in the conventional group, but the difference was not statistically significant (P = 0.055). No significant difference was observed between the two groups in terms of the operation time (P = 0.096), intraoperative blood loss (P = 0.543), time of weight bearing (P = 0.312), fracture healing time (P = 0.272), or complications (P = 1). CONCLUSION: The turned-over patella operation method exhibited some superiority to conventional reduction-fixation approach for treatment of C3-type patellar fractures in terms of efficacy and safety by enlarging the ROM of the knee joint and promoting functional recovery.
Assuntos
Fixação Interna de Fraturas/instrumentação , Consolidação da Fratura/fisiologia , Fraturas Ósseas/cirurgia , Traumatismos do Joelho/cirurgia , Articulação do Joelho/cirurgia , Patela/lesões , Adulto , Feminino , Fixação Interna de Fraturas/reabilitação , Fraturas Ósseas/patologia , Humanos , Traumatismos do Joelho/fisiopatologia , Articulação do Joelho/patologia , Masculino , Pessoa de Meia-Idade , Redução Aberta , Osteotomia/métodos , Patela/diagnóstico por imagem , Amplitude de Movimento Articular , Recuperação de Função Fisiológica , Estudos RetrospectivosRESUMO
BACKGROUND: At present, it is still a challenge for repairing a wide range of bone defect caused by various reasons. We aimed to investigate the effect of induced membrane technique in the treatment of infectious bone defect. PATIENTS AND METHODS: The clinical data of twenty-one patients with infectious bone defect that received induced membrane technique treatment from January 2008 to August 2017 were collected for this study. The complications were recorded, and the bone defect healing and the recovery of joint function were evaluated by Paley method. The adjacent joint activities were also evaluated. RESULTS: One month after the first stage of surgery, one case had wound dehiscence, and others healed well without infection. Six cases had induced membrane injury during the second stage of surgery, and 4 of them received induced membrane wrapping reconstruction. At the last follow-up, bone defect healing was excellent, the joint function was restored (the rate of excellent and good was 90.5%). The joint range of motion recovered well and the rate of excellent and good was 81.0%. CONCLUSION: Induction membrane technique in the treatment of infectious bone defect has advantages of simple operation, rapid healing of bone defects, and low recurrence rate of infection.
Assuntos
Cimentos Ósseos/uso terapêutico , Transplante Ósseo , Articulações/fisiopatologia , Osteomielite/cirurgia , Procedimentos de Cirurgia Plástica , Cicatrização , Adolescente , Adulto , Idoso , Desbridamento , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Osteomielite/complicações , Amplitude de Movimento Articular , Deiscência da Ferida Operatória/etiologia , Resultado do Tratamento , Adulto JovemRESUMO
OBJECTIVE: We aimed to discover the molecular mechanism of hsa_circ_0076694 (circRUNX2) on osteogenic differentiation. We also explored the interaction between circRUNX2, miR-203 and RUNX2. METHODS: Clinical samples obtained from femoral neck fracture patients' bone tissues were used to collect circRUNX2, miR-203, and RUNX2 expression data, while their expression changes were observed in human bone mesenchymal stem cells (hBMSCs) during osteogenic differentiation. QRT-PCR and Western blot were used to analyse levels of RNAs and proteins. Biotin pull down, RIP, RNA FISH, and Dual-Luciferase Reporter assays demonstrated the relationship between circRUNX2, miR-203, and RUNX2. ALP and ARS staining were used to measure the degree of osteogenic differentiation under the control of circRUNX2, miR-203. RESULTS: CircRUNX2 were down-regulated in osteoporotic patients' bone tissues. CircRUNX2 could inhibit miR-203 expression by sponging miR-203. MiR-203 inhibited osteogenic differentiation by targeting the 3'-UTR of RUNX2 and down-regulate RUNX2 expression. Overexpression of circRUNX2 promoted the expression of osteogenic differentiation-related proteins such as RUNX2, OCN, OPN, BSP, and prevented osteoporosis. CONCLUSION: circRUNX2 could sponge miR-203 and enhance RUNX2 expression, thus circRUNX2 prevents osteoporosis and may provide a novel therapeutic strategy for it.