RESUMO
Recent studies have implemented a calculated additive toxicity (CAT) approach that sums measured disinfection byproduct (DBP) concentrations weighted by their respective in vitro bioassay potencies to estimate their associated risk in disinfected waters. In this study, the CAT approach was used to systematically investigate 21 regulated and unregulated DBPs measured in drinking water at the household level. Water samples from the tap were collected from over 120 randomly selected participants supplied by eight public water systems using four distinct source water types, two types of disinfection processes, and across two seasons. The purpose of this study was to compare CAT using multiple biological end points, examine household variability, identify DBPs driving toxicity, and assess if current regulated DBPs are adequate predictors of unregulated DBPs. Our results support the significance of unregulated DBPs, particularly haloacetonitriles and iodoacetic acid, as drivers of toxicity. Simple linear models between regulated versus unregulated concentrations and CAT were overall weak with 67% considered poor (r 2 < 0.3). These results reveal that current regulatory monitoring approaches may not be adequately capturing true household exposure due to higher contribution of unregulated DBPs to CAT and poor predictability between regulated and unregulated DBP-mediated CAT.
RESUMO
Treated wastewater effluent is a major contributor to concentrations of many anthropogenic chemicals in the environment. Examining patterns of these compounds measured from different catchment areas comprising the influent to a wastewater treatment plant, across many months, may reveal patterns in compound sources and seasonality helpful to management efforts. This study considers a wastewater catchment system that was sampled at six sub-catchment sites plus the treatment plant influent and effluent at seven time points spanning nine months. Wastewater samples were analyzed with LC-QTOF-MS using positive electrospray ionization and GC-QTOF-MS using negative chemical ionization and electron ionization. MS data were screened against spectral libraries to identify micropollutants. As expected, multiple classes of chemicals were represented, including pharmaceuticals, plasticizers, personal care products, and flame retardants. Patterns in the compounds seen at different sampling sites and dates reflect the varying uses and down-the-drain routes that influence micropollutant loading in sewer systems. Patterns in examined compounds revealed little spatial variation, and greater temporal variation. For example, the greatest loads of DEET were found to occur in the summer months. Additionally, groups of compounds exhibited strong correlation with each other, which could be indicative of similar down-the-drain routes (such as a group intercorrelated chemicals that are components of cleaning products) or the influence of similar physicochemical processes within the sewer system. This study contributes to the understanding of dynamics of micropollutants in sewer systems.
Assuntos
Retardadores de Chama , Poluentes Químicos da Água , Águas Residuárias , Poluentes Químicos da Água/análise , Estações do Ano , Cromatografia Gasosa-Espectrometria de Massas , Monitoramento AmbientalRESUMO
The Longfin Smelt (Spirinchus thaleichthys) population in the San Franscisco Bay/Sacramento-San Joaquin Delta (Bay-Delta) has declined to â¼1% of its pre-1980s abundance and, as a result, is listed as threatened under the California Endangered Species Act. The reasons for this decline are multiple and complex, including the impacts of contaminants. Because the spawning and rearing seasons of Longfin Smelt coincide with the rainy season, during which concentrations of contaminants increase due to runoff, we hypothesized that early life stages may be particularly affected by those contaminants. Bifenthrin, a pyrethroid insecticide commonly used in agricultural and urban sectors, is of concern. Concentrations measured in the Bay-Delta have been shown to disrupt the behavior, development, and endocrine system of other fish species. The objective of the present work was to assess the impact of bifenthrin on the early developmental stages of Longfin Smelt. For this, embryos were exposed to 2, 10, 100, and 500 ng/L bifenthrin from fertilization to hatch, and larvae were exposed to 2, 10, and 100 ng/L bifenthrin from one day before to 3 days post-hatch. We assessed effects on size at hatch, yolk sac volume, locomotory behavior, and upper thermal susceptibility (via cardiac endpoints). Exposure to these environmentally relevant concentrations of bifenthrin did not significantly affect the cardiac function of larval Longfin Smelt; however, exposures altered their behavior and resulted in smaller hatchlings with reduced yolk sac volumes. This study shows that bifenthrin affects the fitness-determinant traits of Longfin Smelt early life stages and could contribute to the observed population decline.
Assuntos
Osmeriformes , Piretrinas , Poluentes Químicos da Água , Animais , Piretrinas/toxicidade , Espécies em Perigo de ExtinçãoRESUMO
Pesticides have been reported in treated wastewater effluent at concentrations that exceed aquatic toxicity thresholds, indicating that treatment may be insufficient to adequately address potential pesticide impacts on aquatic life. Gaining a better understanding of the relative contribution from specific use patterns, transport pathways, and flow characteristics is an essential first step to informing source control measures. The results of this study are the first of their kind, reporting pesticide concentrations at sub-sewershed sites within a single sewer catchment to provide information on the relative contribution from various urban sources. Seven monitoring events were collected from influent, effluent, and seven sub-sewershed sites to capture seasonal variability. In addition, samples were collected from sites with the potential for relatively large mass fluxes of pesticides (pet grooming operations, pest control operators, and laundromats). Fipronil and imidacloprid were detected in most samples (>70%). Pyrethroids were detected in >50% of all influent and lateral samples. There were significant removals of pyrethroids from the aqueous process stream within the facility to below reporting limits. Imidacloprid and fiproles were the only pesticides that were detected above reporting limits in effluent, highlighting the importance of source identification and control for the more hydrophilic compounds. Single source monitoring revealed large contributions of fipronil, imidacloprid, and permethrin originating from a pet groomer, with elevated levels of cypermethrin at a commercial laundry location. The results provide important information needed to prioritize future monitoring efforts, calibrate down-the-drain models, and identify potential mitigation strategies at the site of pesticide use to prevent introduction to sewersheds.
Assuntos
Praguicidas , Piretrinas , Poluentes Químicos da Água , Animais , Praguicidas/análise , Poluentes Químicos da Água/análise , Monitoramento AmbientalRESUMO
Nontarget chemical analysis using high-resolution mass spectrometry has increasingly been used to discern spatial patterns and temporal trends in anthropogenic chemical abundance in natural and engineered systems. A critical experimental design consideration in such applications, especially those monitoring complex matrices over long time periods, is a choice between analyzing samples in multiple batches as they are collected, or in one batch after all samples have been processed. While datasets acquired in multiple analytical batches can include the effects of instrumental variability over time, datasets acquired in a single batch risk compound degradation during sample storage. To assess the influence of batch effects on the analysis and interpretation of nontarget data, this study examined a set of 56 samples collected from a municipal wastewater system over 7 months. Each month's samples included 6 from sites within the collection system, one combined influent, and one treated effluent sample. Samples were analyzed using liquid chromatography high-resolution mass spectrometry in positive electrospray ionization mode in multiple batches as the samples were collected and in a single batch at the conclusion of the study. Data were aligned and normalized using internal standard scaling and ComBat, an empirical Bayes method developed for estimating and removing batch effects in microarrays. As judged by multiple lines of evidence, including comparing principal variance component analysis between single and multi-batch datasets and through patterns in principal components and hierarchical clustering analyses, ComBat appeared to significantly reduce the influence of batch effects. For this reason, we recommend the use of more, small batches with an appropriate batch correction step rather than acquisition in one large batch.
RESUMO
While important advances have been made in high-resolution mass spectrometry (HRMS) and its applications in non-targeted analysis (NTA), the number of identified compounds in biological and environmental samples often does not exceed 5% of the detected chemical features. Our aim was to develop a computational pipeline that leverages data from HRMS but also incorporates physicochemical properties (equilibrium partition ratios between organic solvents and water; Ksolvent-water) and can propose molecular structures for detected chemical features. As these physicochemical properties are often sufficiently different across isomers, when put together, they can form a unique profile for each isomer, which we describe as the "physicochemical fingerprint". In our study, we used a comprehensive database of compounds that have been previously reported in human blood and collected their Ksolvent-water values for 129 partitioning systems. We used RDKit to calculate the number of RDKit fragments and the number of RDKit bits per molecule. We then developed and trained an artificial neural network, which used as an input the physicochemical fingerprint of a chemical feature and predicted the number and types of RDKit fragments and RDKit bits present in that structure. These were then used to search the database and propose chemical structures. The average success rate of predicting the right chemical structure ranged from 60 to 86% for the training set and from 48 to 81% for the testing set. These observations suggest that physicochemical fingerprints can assist in the identification of compounds with NTA and substantially improve the number of identified compounds.
Assuntos
Água , Humanos , Isomerismo , Estrutura Molecular , Solventes/química , Água/químicaRESUMO
Airborne carbonyl compounds such as formaldehyde, acrolein, and methyl ethyl ketone have long been chemicals-of-concern in the environment due to their reactivity and their potential for negative health effects. Standard methods for determining carbonyls in air, which focus on a set of 15 or fewer compounds, involve derivatization to form nonvolatile hydrazones, which can readily be analyzed via liquid chromatography (LC) with ultraviolet detectors. Here, we apply a new LC-high-resolution mass spectrometry (HRMS) method to natural gas and a variety of upgraded biofuels to better assess their total carbonyl profile using the inherent selectivity of the standard sampling methodology and the selectivity and sensitivity of HRMS. The standard method accounted for only 64% of the total carbonyl content in natural gas and between 26 and 45% of the total carbonyl content in biogas sources, with the balance detected by the new LC/HRMS method. An additional 540 compounds with molecular formulas consistent with carbonyl compounds were detected compared to only 14 target compounds using the standard method. These results demonstrate that the established method dramatically under-reports both the total carbonyl load and the diversity of carbonyl species in natural gas and biogas samples.
Assuntos
Biocombustíveis , Gás Natural , Acroleína , Formaldeído , Espectrometria de MassasRESUMO
We investigated patterns of volatile organic compound (VOC) contamination in drinking water systems affected by the California 2018 Camp Fire. We performed spatial analysis of over 5000 water samples collected over a 17 month period by a local water utility, sampled tap water for VOCs in approximately 10% (N = 136) of standing homes, and conducted additional nontargeted chemical analysis of 10 samples. Benzene contamination was present in 29% of service connections to destroyed structures and 2% of service connections to standing homes. A spatial pattern was apparent. Tap water in standing homes 11 months after the fire contained low concentrations of benzene in 1% of samples, but methylene chloride was present in 19% of samples, including several above regulatory limits. Elevated methylene chloride was associated with greater distance from the water meter to the tap, longer stagnation time, and the presence of a destroyed structure on the service connection; it was inversely associated with certain trihalomethanes. Nontargeted analysis identified multiple combustion byproducts in the water at 2/10 homes. Our findings support the hypothesis that pyrolysis and smoke intrusion from depressurization contributed to the benzene contamination. Further research is needed to test the hypothesis that methylene chloride may be generated from the dehalogenation of disinfection byproducts stagnating in galvanized iron pipes.
RESUMO
There is an increasing need for comparable and harmonized retention times (tR) in liquid chromatography (LC) among different laboratories, to provide supplementary evidence for the identity of compounds in high-resolution mass spectrometry (HRMS)-based suspect and nontarget screening investigations. In this study, a rigorously tested, flexible, and less system-dependent unified retention time index (RTI) approach for LC is presented, based on the calibration of the elution pattern. Two sets of 18 calibrants were selected for each of ESI+ and ESI-based on the maximum overlap with the retention times and chemical similarity indices from a total set of 2123 compounds. The resulting calibration set, with RTI set to range between 1 and 1000, was proposed as the most appropriate RTI system after rigorous evaluation, coordinated by the NORMAN network. The validation of the proposed RTI system was done externally on different instrumentation and LC conditions. The RTI can also be used to check the reproducibility and quality of LC conditions. Two quantitative structure-retention relationship (QSRR)-based models were built based on the developed RTI systems, which assist in the removal of false-positive annotations. The applicability domains of the QSRR models allowed completing the identification process with higher confidence for substances within the domain, while indicating those substances for which results should be treated with caution. The proposed RTI system was used to improve confidence in suspect and nontarget screening and increase the comparability between laboratories as demonstrated for two examples. All RTI-related calculations can be performed online at http://rti.chem.uoa.gr/.
Assuntos
Reprodutibilidade dos Testes , Calibragem , Cromatografia Líquida , Espectrometria de MassasRESUMO
Diverse organic compounds, many derived from consumer products, are found in sewage sludge worldwide. Understanding which of these poses the most significant environmental threat following land application can be investigated through a variety of predictive and cell-based toxicological techniques. Nontargeted analysis using high-resolution mass spectrometry with predictive estrogenic activity modeling was performed on sewage sludge samples from 12 wastewater treatment plants in California. Diisobutyl phthalate and dextrorphan were predicted to exhibit estrogenic activity and identified in >75% of sludge samples, signifying their universal presence and persistence. Additionally, the application of an estrogen-responsive cell bioassay revealed reductions in agonistic activity during mesophilic and thermophilic treatment but significant increases in antagonism during thermophilic treatment, which warrants further research. Ten nontarget features were identified (metoprolol, fenofibric acid, erythrohydrobupropion, oleic acid, mestranol, 4'-chlorobiphenyl-2,3-diol, medrysone, scillarenin, sudan I, and N,O-didesmethyltramadol) in treatment set samples and are considered to have influenced the in vitro estrogenic activity observed. The combination of predictive and in vitro estrogenicity with nontargeted analysis has led to confirmation of 12 estrogen-active contaminants in California sewage sludge and has highlighted the importance of evaluating both agonistic and antagonistic responses when evaluating the bioactivity of complex samples.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Estrogênios , Estrona/análise , Esgotos , Poluentes Químicos da Água/análiseRESUMO
Upholstered furniture has been a major source of chemical flame retardant (FR) exposures in US homes since the 1970s. FRs are a large group of chemicals, many of which are associated with adverse health effects, including cancer, reproductive toxicity, and neurotoxicity. California homes have some of the highest dust concentrations of FRs, due to Technical Bulletin 117 (TB117), California's outdated flammability standard for furniture foam that was generally followed across the US and Canada. In 2014, this standard was updated to a smolder standard for furniture fabric called TB117-2013, and it is no longer reliant on FRs. This update provided an opportunity to measure differences in FR dust levels in California homes before and after residents replaced older upholstered furniture, or its foam, with products that met the new standard and were expected to be FR-free. We collected dust from homes of participants who had plans to replace older upholstered furniture, or furniture foam, with FR-free options. We returned for follow-up dust collection six, 12, and 18 months following replacement. Concentrations of three polybrominated diphenyl ethers (PBDEs) (BDE-47, BDE-99, BDE-100), three chlorinated organophosphate ester FRs (tris(2-chloroethyl) phosphate (TCEP), tris(2-chloroisopropyl) phosphate (TCIPP), and tris(1,3-dichloroisopropyl) phosphate (TDCIPP)), and one aryl organophosphate ester FR triphenyl phosphate (TPHP), were widely detected in participant homes. All measured FRs decreased in nearly all homes after the older upholstered furniture was replaced. The decreases in FRs were significant in both homes that replaced entire pieces of furniture and those that replaced only the furniture foam. This study demonstrates that replacing older upholstered furniture or foam significantly reduces concentrations of a range of FRs in the home. Foam replacement offers a potentially more economic alternative that produces a lower volume of waste.
Assuntos
Poluição do Ar em Ambientes Fechados , Retardadores de Chama , Poluição do Ar em Ambientes Fechados/análise , Canadá , Poeira/análise , Monitoramento Ambiental , Retardadores de Chama/análise , Éteres Difenil Halogenados/análise , Humanos , Decoração de Interiores e Mobiliário , Organofosfatos/análise , FosfatosRESUMO
Urban wildfires may generate numerous unidentified chemicals of toxicity concern. Ash samples were collected from burned residences and from an undeveloped upwind reference site, following the Tubbs fire in Sonoma County, California. The solvent extracts of ash samples were analyzed using GC- and LC-high-resolution mass spectrometry (HRMS) and using a suite of in vitro bioassays for their bioactivity toward nuclear receptors [aryl hydrocarbon receptor (AhR), estrogen receptor (ER), and androgen receptor (AR)], their influence on the expression of genetic markers of stress and inflammation [interleukin-8 (IL-8) and cyclooxygenase-2 (COX-2)], and xenobiotic metabolism [cytochrome P4501A1 (CYP1A1)]. Genetic markers (CYP1A1, IL-8, and COX-2) and AhR activity were significantly higher with wildfire samples than in solvent controls, whereas AR and ER activities generally were unaffected or reduced. The bioassay responses of samples from residential areas were not significantly different from the samples from the reference site despite differing chemical compositions. Suspect and nontarget screening was conducted to identify the chemicals responsible for elevated bioactivity using the multiple streams of HRMS data and open-source data analysis workflows. For the bioassay endpoint with the largest available database of pure compound results (AhR), nontarget features statistically related to whole sample bioassay response using Spearman's rank-order correlation coefficients or elastic net regression were significantly more likely (by 10 and 15 times, respectively) to be known AhR agonists than the overall population of compounds tentatively identified by nontarget analysis. The findings suggest that a combination of nontarget analysis, in vitro bioassays, and statistical analysis can identify bioactive compounds in complex mixtures.
Assuntos
Poluentes Químicos da Água , Incêndios Florestais , Animais , Bioensaio , Linhagem Celular Tumoral , Humanos , Espectrometria de Massas , Camundongos , Receptores de Hidrocarboneto Arílico , Receptores de Estrogênio , Poluentes Químicos da Água/análiseRESUMO
Cyanobacterial blooms and the associated release of cyanotoxins pose problems for many conventional water treatment plants due to their limited removal by typical unit operations. In this study, a conventional water treatment process consisting of coagulation, flocculation, sedimentation, filtration, and sludge dewatering was assessed in lab-scale experiments to measure the removal of microcystin-LR and Microcystis aeruginosa cells using liquid chromatography with mass spectrometer (LC-MS) and a hemacytometer, respectively. The overall goal was to determine the effect of recycling cyanotoxin-laden dewatered sludge supernatant on treated water quality. The lab-scale experimental system was able to maintain the effluent water quality below relevant the United States Environmental Protection Agency (US EPA) and World Health Organisation (WHO) standards for every parameter analyzed at influent concentrations of M. aeruginosa above 106 cells/mL. However, substantial increases of 0.171 NTU (Nephelometric Turbidity Unit), 7 × 104 cells/L, and 0.26 µg/L in turbidity, cyanobacteria cell counts, and microcystin-LR concentration were observed at the time of dewatered supernatant injection. Microcystin-LR concentrations of 1.55 µg/L and 0.25 µg/L were still observed in the dewatering process over 24 and 48 h, respectively, after the initial addition of M.aeruginosa cells, suggesting the possibility that a single cyanobacterial bloom may affect the filtered water quality long after the bloom has dissipated when sludge supernatant recycling is practiced.
Assuntos
Água Potável/microbiologia , Proliferação Nociva de Algas , Toxinas Marinhas/isolamento & purificação , Microcistinas/isolamento & purificação , Microcystis/isolamento & purificação , Esgotos/microbiologia , Microbiologia da Água , Purificação da Água , Qualidade da Água , Precipitação Química , Cromatografia Líquida , Filtração , Espectrometria de Massas , Microcystis/crescimento & desenvolvimento , Microcystis/metabolismo , Nefelometria e TurbidimetriaRESUMO
Biogas consisting primarily of methane (CH4) and carbon dioxide (CO2) can be upgraded to a transportation fuel referred to as renewable natural gas (RNG) by removing CO2 and other impurities. RNG has energy content comparable to fossil compressed natural gas (CNG) but with lower life-cycle greenhouse gas (GHG) emissions. In this study, a light-duty cargo van was tested with CNG and two RNG blends on a chassis dynamometer in order to compare the toxicity of the resulting exhaust. Tests for reactive oxygen species (ROS), biomarker expressions (CYP1A1, IL8, COX-2), and mutagenicity (Ames) show that RNG exhaust has toxicity that is comparable or lower than CNG exhaust. Statistical analysis reveals associations between toxicity and tailpipe emissions of benzene, dibenzofuran, and dihydroperoxide dimethyl hexane (the last identification is considered tentative/uncertain). Further gas-phase toxicity may be associated with tailpipe emissions of formaldehyde, dimethyl sulfide, propene, and methyl ketene. CNG exhaust contained higher concentrations of these potentially toxic chemical constituents than RNG exhaust in all of the current tests. Photochemical aging of the vehicle exhaust did not alter these trends. These preliminary results suggest that RNG adoption may be a useful strategy to reduce the carbon intensity of transportation fuels without increasing the toxicity of the vehicle exhaust.
Assuntos
Poluentes Atmosféricos , Gás Natural , Poluentes Atmosféricos/análise , Biocombustíveis , Gasolina , Metano/análise , Emissões de Veículos/análise , Emissões de Veículos/toxicidadeRESUMO
BACKGROUND/OBJECTIVE: Polyurethane foam (PUF), a proven sampling medium for measuring air concentrations of organic compounds, is widely used in upholstered home furniture. We evaluated the potential utility of couch PUF as a passive sampler and as a reservoir for non-flame retardant semivolatile organic compounds (SVOCs). METHODS: We collected PUF samples from 13 California home couches, measured concentrations (CPUF) of 64 SVOCs at three different depths (i.e., top, top-middle, and middle from couch surfaces facing outward), and examined concentration changes with depth. To calculate the PUF-air partition coefficient (KPUF-air = CPUF/Cair = CPUF × Kdust-air/Cdust), we used the calculated dust-air partition coefficient (Kdust-air) with the octanol-air partition coefficient (Koa) and dust concentrations (Cdust) simultaneously collected and measured. We used KPUF-air to compute fugacity capacity of PUF and chemical mass distribution among various indoor compartments and PUF. RESULTS: Among 29 detected compounds, 11 compounds were detected in more than 50% of the samples at all depths. Among the 11 compounds, concentrations of phenanthrene, 2-benzylideneoctanal, galaxolide, tonalide, and homosalate decreased with depth. Among the studied SVOCs, more than 20% of the total mass was distributed to couch PUF for phenol and compounds in skin-applied products (i.e., 2-benzylideoneoctanal, galaxolide, and homosalate). CONCLUSIONS: Our results showed that couch PUF can absorb many SVOCs and may be an important reservoir for some SVOCs. However, it may not be an effective passive sampling medium for those that have relatively high Koa values. Direct dermal contact with couch seats may be an important exposure route for non-users of skin-applied compounds.
Assuntos
Poluentes Atmosféricos , Poluição do Ar em Ambientes Fechados , Compostos Orgânicos Voláteis , Poluentes Atmosféricos/análise , Poluição do Ar em Ambientes Fechados/análise , Poeira , Monitoramento Ambiental , Poliuretanos/análise , Compostos Orgânicos Voláteis/análiseRESUMO
The determinants of the temporal variability of indoor dust concentrations of semivolatile organic compounds (SVOCs) remain mostly unexplored. We examined temporal variability of dust concentrations and factors affecting dust concentrations for a wide range of SVOCs. We collected dust samples three times from 29 California homes during a period of 22 months and quantified concentrations of 47 SVOCs in 87 dust samples. We computed intraclass correlation coefficients (ICCs) using three samples collected within the same house. We calculated correlation coefficients (r) between two seasons with similar climate (spring and fall) and between two seasons with opposite climate (summer and winter). Among 26 compounds that were detected in more than 50% of the samples at all three visits, 20 compounds had ICCs above 0.50 and 6 compounds had ICCs below 0.50. For 19 out of 26 compounds, correlation coefficients between spring and fall (r = 0.48-0.98) were higher than those between summer and winter (r = 0.09-0.92), implying seasonal effects on dust concentrations. Our study showed that within-home temporal variability of dust concentrations was small (ICC > 0.50) for most SVOCs, but dust concentrations may vary over time for some SVOCs with seasonal variations in source rates, such as product use.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar em Ambientes Fechados/análise , Compostos Orgânicos Voláteis/análise , Poeira , Retardadores de Chama , Humanos , Estações do AnoRESUMO
Chemical exposure via dust ingestion is of great interest to researchers and regulators because children are exposed to dust through their daily activities, and as a result, to the many chemicals contained within dust. Our goal was to develop a workflow to identify and rank organic chemicals that could be used as tracers to calculate children's dust ingestion rates. We proposed a set of criteria for a chemical to be considered a promising tracer. The best tracers must be (1) ubiquitous in dust, (2) unique to dust, (3) detectable as biomarkers in accessible biological samples, and (4) have available or obtainable ADME information for biomarker-based exposure reconstruction. To identify compounds meeting these four criteria, we developed a workflow that encompasses non-targeted analysis approaches, literature and database searching, and multimedia modeling. We then implemented an ad hoc grading system and ranked candidate chemicals based on fulfillment of our criteria (using one small, publicly available dataset to show proof of concept). Initially, five chemicals (1,3-diphenylguanidine, leucine, piperine, 6:2/8:2 fluorotelomer phosphate diester, 6:2 fluorotelomer phosphate diester) appeared to satisfy many of our criteria. However, a rigorous manual investigation raised many questions about the applicability of these chemicals as tracers. Based on the results of this initial pilot study, no individual compounds can be unequivocally considered suitable tracers for calculating dust ingestion rates. Future work must therefore consider larger datasets, generated from broader measurement studies and literature searches, as well as refinements to selection criteria, to identify robust and defensible tracer compounds.
Assuntos
Poeira , Monitoramento Ambiental , Criança , Poeira/análise , Ingestão de Alimentos , Exposição Ambiental/análise , Humanos , Organofosfatos , Projetos PilotoRESUMO
Biogas is a renewable energy fuel that can be treated to increase purity so that the resulting "biomethane" can be injected into the natural gas pipeline grid. The trace contaminants in biogas and biomethane make up a small fraction of the total gas but they still have the potential to cause adverse health effects and pipeline corrosion. This study investigates the statistical distributions of 17 trace metals, six mercaptans, hydrogen sulfide, ammonia, and six additional trace organic compounds. Twelve of these 31 trace contaminants have been previously identified as constituents of concern based on their toxicity profiles and through health risk assessment studies. Untreated and treated samples of biogas were collected from 12 different biogas production facilities using diverse feedstocks throughout California. Results show that most biogas trace contaminants follow a single log-normal distribution or a bi-modal lognormal distribution depending on the type of production facility. Treatment of biogas demonstrates some removal for all trace contaminants, but four constituents of concern (copper, lead, hydrogen sulfide, and methyl mercaptan) are predicted to have a >1% probability of exceeding trigger levels even after common treatments. This finding suggests that enhanced monitoring may be warranted for these contaminants. Several trace metals and volatile organic compounds (VOCs) were found to have seasonal trends with greater concentrations in the summer and lower concentrations in the winter suggesting that seasonal variation should be considered in future monitoring plans.
Assuntos
Biocombustíveis , Sulfeto de Hidrogênio , Gás Natural , Compostos Orgânicos VoláteisRESUMO
Nanoparticle capping agents are critical for controlling the growth, oxidation state, and final particle size during aqueous synthesis. However, despite the known phytotoxicity of cetyltrimethylammonium bromide (CTAB) to plants, it is used to synthesize metal oxide nanoparticles of uniform size and with mesoporous structure. Among the few studies that have investigated how CTAB influences nanoparticle toxicity, CTAB has never been identified as the primary cause of nanoparticle toxicity in environmental systems; rather nanoparticle surface charge or morphology was identified as the driver of toxicity in environmentally relevant systems. In the current study, CTAB release from CTAB surface modified Cu2O nanoparticles (SM-Cu2O NPs) inhibited duckweed (Landoltia punctata) growth, even when administered at subtoxic Cu concentrations. Organic ligands, such as humic acid (HA) and ethylenediaminetetraacetic acid (EDTA), lessened growth inhibition associated with exposure to SM-Cu2O NPs, likely through electrostatic and hydrophobic interactions with CTAB. Such results highlight the need for a more holistic approach to nanoparticle surface modification and improved communication between toxicologists and synthetic chemists to develop green alternatives for nanoparticle synthesis.