Carborane-containing liquid crystals: synthesis and structural, conformational, thermal, and spectroscopic characterization of diheptyl and diheptynyl derivatives of p-carboranes.

Molecular and electronic structures for four p-carborane derivatives were studied in the context of their liquid crystalline properties. Thus molecular and crystal structures of diheptyl and diheptynyl derivatives of 10- and 12-vertex bi-p-carboranes were determined by X-ray crystallography and compared to the results of ab initio calculations at the HF/6-31G level of theory. Experimentally observed significant positional disorder of one of the substituents in the 10-vertex derivatives, 2[2]a and 2[2]b, was related to conformational properties of the alkyl-carborane bond. Experimental and theoretical studies of the electronic structures were conducted for the four compounds using UV and NMR spectroscopies. The nature of the unique long wavelength absorption band at 232 nm in the diheptynyl derivative 2[2]b was explained using INDO/2//HF/6-31G analysis. The complete assignment of the (13)C signals was accomplished using a long-range coupling technique and was supported by the calculated (HF/6-31G) isotropic shielding tensors. Analysis of absorption spectra, NMR substituent effects, and trends in bond lengths shows generally strong cage-acetylene electronic interactions for the 10-vertex p-carborane, while the 12-vertex p-carborane remains largely electronically isolated. Ab initio calculations revealed that 12-vertex p-carborane has significantly larger electronic polarizability and quadrupole moments than the 10-vertex analogues, which are larger than those for bicyclo[2.2.2]octane compounds. All these results on packing, conformational, and electronic properties form the basis for the discussion of thermal behavior of the four carborane compounds, bicyclo[2.2.2]octane analogues, and some related compounds.

Three-coordinate copper(II)-phenolate complexes.

The reactions of LCuCl (L = 2,4-bis((2,6-diisopropylphenyl)imido)pentane (L(iPr)), 2,4-bis((2,6-diisopropylphenyl)imido)-3-chloropentane (L(CliPr))) with the phenolates TlOAr (Ar = C(6)H(3)Me(2), C(6)H(4)OMe, C(6)H(4)tBu) and NaOC(6)H(3)(tBu)(2) were explored. Novel three-coordinate Cu(II)-phenolates, LCuOAr, were isolated from the reactions with the thallium phenolates and were characterized by X-ray crystallography and spectroscopy (UV-vis, EPR). The complexes feature short Cu-O(phenolate) distances (average Cu-O = 1.81 A) and, with one exception, irregular N-Cu-O(phenolate) angles that differ within each compound (15 degrees < Delta < 28 degrees, where Delta = angleN(1)-Cu-O - angleN(2)-Cu-O). The exception is L(iPr)Cu(OC(6)H(4)tBu), for which X-ray structures at -100 and 25 degrees C differed due to an unusual reversible phase change with nonmerohedral twinning (2:1 ratio) in the low-temperature form. The high-temperature form has local C(2)(v) symmetry (Delta = 0 degrees ), and upon cooling below the phase transition temperature (-8 +/- 5 degrees C) lateral movement of the phenolate ligand (Delta = 17.6 degrees ) and rotation of the phenolate plane by 10.7 degrees occurs. Resonance Raman spectroscopic data acquired for L(iPr)Cu(OC(6)H(4)tBu) corroborated assignment of phenolate --> Cu(II) LMCT character in the UV-vis spectra. Cyclic voltammetry experiments (THF, 0.5 M NBu(4)PF(6)) revealed negative E(1/2) values for the Cu(II)/Cu(I) couples relative to NHE, consistent with enhanced stabilization of the Cu(II) state by both the strongly electron donating beta-diketiminate ligand and the phenolates. Although thermally stable, the Cu(II)-phenolates are unusually reactive with dioxygen, albeit to give product(s) that have yet to be identified. In the reaction of L(iPr)CuCl with NaOC(6)H(3)(tBu)(2) no Cu(II)-phenolate was observed. Instead, a Cu(I) complex was generated quantitatively by trapping with added isocyanide, [L(iPr)CuNC(C(6)H(3)Me(2))], along with 3,3',5,5'-tetra-tert-butyl-4,4'-dibenzoquinone and 2,6-di-tert-butylphenol in 27 +/- 3% and 46 +/- 6% yields, respectively, corresponding to the overall reaction 4L(iPr)Cu(II)Cl + 4NaOAr --> 4L(iPr)Cu(I) + 4NaCl + dibenzoquinone + 2(phenol).

Synthesis, isolation, and characterization of trisodium tricarbonyliridate (3-), Na3[Ir(CO)3]. Initial studies on its derivative chemistry and structural characterizations of trans-[Ir(CO)3(EPh3)2](-), E = Ge, Sn, and trans-[Co(CO)3(SnPh3)2](-1).

Reduction of Na[Ir(CO)4] by sodium metal in (Me2N)3PO, followed by treatment with liquid ammonia, provided high yields (ca. 90%) of unsolvated Na3[Ir(CO)3], a thermally stable, pyrophoric orange solid. This substance contains iridium in its lowest known formal oxidation state of -3 and has been characterized by IR spectroscopy, elemental analyses, and derivative chemistry, i.e., by its conversion to the triphenylgermyl and triphenylstannyl complexes, trans-[Ir(CO)3(EPh3)2](-), E = Ge, Sn. Single-crystal X-ray structures of the tetraethylammonium salts of these species, as well as [Co(CO)3(SnPh3)2](-), confirm the trigonal bipyramidal nature of the anions, originally predicted on the basis of their IR spectra in the carbonyl stretching frequency region. These structural characterizations provide important additional evidence for the presence of metal tricarbonyl units in Na3[M(CO)3], M = Co, Ir.

Hydrogen-bonding cavities about metal ions: synthesis, structure, and physical properties for a series of monomeric M-OH complexes derived from water.

The tripodal ligand N[CH2CH2NHC(O)NHC(CH3)3]3 ([H61]) was used to synthesize a series of monomeric complexes with terminal hydroxo ligands. The complexes [Co(II/III)H31(OH)](2-/1-), [Fe(II/III)H31(OH)](2-/1-), and [Zn(II)H31(OH)](2-) have been isolated and characterized. The source of the hydroxo ligand in these complexes is water, which was confirmed with an isotopic labeling study for [Co(III)H31(OH)](1-). The synthesis of [M(II)H31(OH)](2-) complexes was accomplished by two routes. Method A used 3 equiv of base prior to metalation and water binding, affording yields of < or = 40% for [Co(II)H31(OH)](2-). When 4 equiv of base was used (method B), yields ranged from 50% to 70% for all of the M(II)H31(OH)](2-) complexes. This improvement is attributed to the presence of an intramolecular basic site within the cavity, which scavenges protons produced during formation of the M(II)-OH complexes. The molecular structures of [Zn(II)H31(OH)](2-), [Fe(II)H31(OH)](2-), [Co(II)H31(OH)](2-), and [Co(III)H31(OH)](1-) were examined by X-ray diffraction methods. The complexes have trigonal bipyramidal coordination geometry with the hydroxo oxygen trans to the apical nitrogen. The three M(II)-OH complexes crystallized with nearly identical lattice parameters, and each contains two independent anions in the asymmetric unit. The complexes have intramolecular H-bonds from the urea cavity of [H31](3-) to the coordinated hydroxo oxygen. All the complexes have long M-O(H) bond lengths (>2.00 A) compared to those of the few previously characterized synthetic examples. The longer bond distances in [M(II)H31(OH)](2-) reflect the intramolecular H-bonds in the complexes. The five-coordinate [Zn(II)H31(OH)](2-) has an average Zn-O(H) distance of 2.024(2) A, which is similar to that found for the zinc site in carbonic anhydrase II (2.05(2) A). The enzyme active site also has an extensive network of intramolecular H-bonds to the hydroxo oxygen. [Co(II)H31(OH)](2-) and [Fe(II)H31(OH)](2-) have one-electron redox processes at -0.74 and -1.40 V vs SCE. Both complexes can be chemically oxidized to yield their corresponding M(III)-OH complexes. [Co(III)H31(OH)](1-), with an S = 1 ground state, is a rare example of a paramagnetic Co(III) complex.

Cationic aluminum alkyl complexes incorporating aminotroponiminate ligands.

The synthesis, structures, and reactivity of cationic aluminum complexes containing the N,N'-diisopropylaminotroponiminate ligand ((i)Pr(2)-ATI(-)) are described. The reaction of ((i)Pr(2)-ATI)AlR(2) (1a-e,g,h; R = H (a), Me (b), Et (c), Pr (d), (i)Bu (e), Cy (g), CH(2)Ph (h)) with [Ph(3)C][B(C(6)F(5))(4)] yields ((i)()Pr(2)-ATI)AlR(+) species whose fate depends on the properties of the R ligand. 1a and 1b react with 0.5 equiv of [Ph(3)C][B(C(6)F(5))(4)] to produce dinuclear monocationic complexes [([(i)Pr(2)-ATI] AlR)(2)(mu-R)][(C(6)F(5))(4)] (2a,b). The cation of 2b contains two ((i)()Pr(2)-ATI)AlMe(+) units linked by an almost linear Al-Me-Al bridge; 2a is presumed to have an analogous structure. 2b does not react further with [Ph(3)C][B(C(6)F(5))(4)]. However, 1a reacts with 1 equiv of [Ph(3)C][B(C(6)F(5))(4)] to afford ((i Pr(2)-ATI)Al(C(6)F(5))(mu-H)(2)B(C(6)F(5))(2) (3) and other products, presumably via C(6)F(5)(-) transfer and ligand redistribution of a [((i)()Pr(2)-ATI)AlH][(C(6)F(5))(4)] intermediate. 1c-e react with 1 equiv of [Ph(3)C][B(C(6)F(5))(4)] to yield stable base-free [((i)Pr(2)-ATI)AlR][B(C(6)F(5))(4)] complexes (4c-e). 4c crystallizes from chlorobenzene as 4c(ClPh).0.5PhCl, which has been characterized by X-ray crystallography. In the solid state the PhCl ligand of 4c(ClPh) is coordinated by a dative PhCl-Al bond and an ATI/Ph pi-stacking interaction. 1g,h react with [Ph(3)C][B(C(6)F(5))(4)] to yield ((i)Pr(2)-ATI)Al(R)(C(6)F(5)) (5g,h) via C(6)F(5)(-) transfer of [((i)Pr(2)-ATI)AlR][(BC(6)F(5))(4)] intermediates. 1c,h react with B(C(6)F(5))(3) to yield ((i)Pr(2)-ATI)Al(R)(C(6)F(5)) (5c,h) via C(6)F(5)(-) transfer of [((i)Pr(2)-ATI)AlR][RB(C(6)F(5))(3)] intermediates. The reaction of 4c-e with MeCN or acetone yields [((i)Pr(2)-ATI)Al(R)(L)][B(C(6)F(5))(4)] adducts (L = MeCN (8c-e), acetone (9c-e)), which undergo associative intermolecular L exchange. 9c-e undergo slow beta-H transfer to afford the dinuclear dicationic alkoxide complex [(((i)Pr(2)-ATI)Al(mu-O(i)()Pr))(2)][B(C(6)F(5))(4)](2) (10) and the corresponding olefin. 4c-e catalyze the head-to-tail dimerization of tert-butyl acetylene by an insertion/sigma-bond metathesis mechanism involving [((i)Pr(2)-ATI)Al(C=C(t)Bu)][B(C(6)F(5))(4)] (13) and [((i)Pr(2)-ATI)Al(CH=C((t)()Bu)C=C(t)Bu)][B(C(6)F(5))(4)] (14) intermediates. 13 crystallizes as the dinuclear dicationic complex [([(i Pr(2)-ATI]Al(mu-C=C(t)Bu))(2)][B(C(6)F(5))(4)](2).5PhCl from chlorobenzene. 4e catalyzes the polymerization of propylene oxide and 2a catalyzes the polymerization of methyl methacrylate. 4c,e react with ethylene-d(4) by beta-H transfer to yield [((i)Pr(2)-ATI)AlCD(2)CD(2)H][B(C(6)F(5))(4)] initially. Polyethylene is also produced in these reactions by an unidentified active species.

Variable-temperature x-ray structural investigation of [Fe[HC(3,5-Me2pz)3]2](BF4)2 (pz= pyrazolyl ring): observation of a thermally induced spin state change from all high spin to an equal high spin-low spin mixture, concomitant with the onset of nonmerohedral twinning.

The complex [Fe[HC(3,5-Me(2)pz)(3)](2)](BF(4))(2) (pz = pyrazolyl ring) undergoes a phase transition that occurs concomitantly with a thermally induced spin conversion between the high-spin (HS, S = 2) and low-spin (LS, S = 0) states. Above 204 K the compound is completely HS with the structure in the C2/c space group with Z = 4. A crystal structure determination of this phase was performed at 220 K yielding the cell constants a = 20.338(2) A, b = 10.332(1) A, c = 19.644(2) A, beta = 111.097(2) degrees, and V = 3851.5(6) A(3). There is one unique iron(II) site at this temperature. Below 206 K the compound converts to a 50:50 mixture of HS and LS. The radical change in the coordination sphere for half of the iron(II) sites, most notably a shortening of the Fe-N bond distances by ca. 0.2 A, that accompanies this magnetic transition causes a phase transition. The crystal system changes from C-centered monoclinic to primitive triclinic with Z = 2 with two half-molecules on independent inversion centers. A crystal structure determination was performed at 173 K in space group P1 with a = 10.287(2) A, b = 11.355(3) A, c = 18.949(4) A, alpha = 90.852(4) degrees, beta = 105.245(4) degrees, gamma = 116.304(4) degrees, and V = 1892.3(8) A(3). All specimens investigated below the phase transition temperature were determined to be nonmerohedral twins. Temperature cycling between these two forms does not appear to degrade crystal quality. Previous magnetic susceptibility measurements indicate a second, irreversible increase in the magnetic moment the first time the crystals are cooled below 85 K. A crystal structure determination at 220 K of a specimen precooled to 78 K was not significantly different from those not cooled below 220 K.

Coordination of rare-earth elements in complexes with monovacant Wells-Dawson polyoxoanions.

The alpha-1 and alpha-2 isomers of the monovacant Wells-Dawson heteropolyoxoanion [P(2)W(17)O(61)](10-) are complexants of trivalent rare-earth (RE) ions and serve to stabilize otherwise reactive tetravalent lanthanide (Ln) and actinide (An) ions in aqueous solution. Aspects of the bonding of Ln ions with alpha-1-[P(2)W(17)O(61)](10-) and alpha-2-[P(2)W(17)O(61)](10-) were investigated to address issues of complex formation and stability. We present structural insights about the Ln(III) coordination environment and hydration in two types of stoichiometric complexes, [Ln(alpha-1-P(2)W(17)O(61))](7-) and [Ln(alpha-2-X(2)W(17)O(61))(2)](17-) (for Ln identical with Sm, Eu, Lu; X identical with P, As). The crystal and molecular structures of [(H(2)O)(4)Lu(alpha-1-P(2)W(17)O(61))](7-) (1) and [Lu(alpha-2-P(2)W(17)O(61))(2)](17-) (2) were solved and refined through use of single-crystal X-ray diffraction. The crystallographic results are supported with corresponding insights from XAFS (X-ray absorption fine structure) for a series of nine solid-state complexes as well as from optical luminescence spectroscopy of the Eu(III) analogues in aqueous solution. All the Ln ions are eight-coordinate with oxygen atoms in a square antiprism arrangement. For the 1:1 stoichiometric Ln/alpha-1-[P(2)W(17)O(61)](10-) complexes, the Ln ions are bound to four O atoms of the lacunary polyoxometalate framework in addition to four O atoms from solvent (water) molecules as [(H(2)O)(4)Ln(alpha-1-P(2)W(17)O(61))](7-). This structure (1) is the first of its kind for any metal complex of alpha-1-[P(2)W(17)O(61)](10-), and the data indicate that the general stoichiometry [(H(2)O)(4)Ln(alpha-1-P(2)W(17)O(61))](7-) is maintained throughout the lanthanide series. For the 1:2 stoichiometric Ln/alpha-2-[X(2)W(17)O(61)](10-) complexes, no water molecules are in the Ln-O(8) coordination sphere. The Ln ions are bound to eight O atoms-four from each of two heteropolyanions-as [Ln(alpha-2-X(2)W(17)O(61))(2)](17-). The average Ln-O interatomic distances decrease across the lanthanide series, consistent with the decreasing Ln ionic radius.

Assembly of the inorganic double helix Mg6(Et2NCO2)12 by fixation of carbon dioxide: crystal and solution structure.

The homoleptic magnesium carbamato complex Mg6(Et2NCO2)12, 1 (Et2NCO2- = diethylcarbamato anion), was prepared by the reaction of dibutylmagnesium with diethylamine, followed by carboxylation using gaseous carbon dioxide. Crystallographic characterization demonstrated that 1 has the standard M6(R2NCO2)12 structure and is a double helix of MgO(x)(x = 5, 6) coordination polyhedra with Delta or Lambda stereochemistry arising from the configuration around the six-coordinate Mg2+ cations. It crystallized in the orthorhombic space group Ccca with two molecules of Delta1 and two of Lambda1 per unit cell (a = 21.548 A, b = 25.094 A, c = 15.4485(11) A, alpha = beta = gamma = 90 degrees ). Extensive solution characterization of 1 by 1-dimensional proton and 13C NMR spectroscopy and by two-dimensional 1H-[13C] NMR correlation techniques verified that the helical structure is maintained in solution. Moreover, these measurements indicated that the intramolecular dynamics of 1 relating to motions of the ethyl groups was substantially hindered in solution. Correlation of the crystallographic and NMR structural studies indicated that this arises from a combination of hindered rotation about the carbamato C-N bond and efficient packing of the ethyl groups around the Mg6O24 core. The result is an inverted-micelle-like structure for 1 in which the hydrophobic ethyl groups form a sheath largely restricting access to the hydrophilic Mg6O24 core.

Synthesis and characterization of iridium 1,3,5-triaza-7-phosphaadamantane (PTA) complexes. X-ray crystal and molecular structures of [Ir(PTA)4(CO)]Cl and [Ir(PTAH)3(PTAH2)(H)2]Cl6.

The first 1,3,5-triaza-7-phosphaadamantane (PTA) ligated iridium compounds have been synthesized. The reaction of PTA with [Ir(COD)Cl]2 (COD = 1,5-cyclooctadiene) under a CO atmosphere produces an inseparable mixture of [Ir(PTA)3(CO)Cl] (1) and the PTA analogue of Vaska's compound, [Ir(PTA)2(CO)Cl] (2). Compound 1 and [Ir(PTA)4(CO)]Cl (3) were prepared via ligand substitution reactions of PTA with Vaska's compound, trans-Ir(PPh3)2(CO)Cl, in absolute and 95% ethanol, respectively. Complex 3 crystallizes in the orthorhombic space group Pbca with a = 20.3619(4) A, b = 14.0345(3) A, c = 24.1575(5) A, and Z = 8. Single-crystal X-ray diffraction studies show that 3 has a trigonal bipyramidal structure in which the CO occupies an axial position. This is the first crystallographically characterized [IrP4(CO)]+ complex in which the CO is axially ligated. Compound 1 was converted into 3 by ligand substitution with 1 equiv of PTA in water. Interestingly, the reaction of 3 with excess NaCl did not result in the production of 1, but instead the formation of the dichloro species, [Ir(PTAH)2(PTA)2Cl2]Cl3 (4) (PTAH = protonated PTA). Dissolution of 1 or 3 in dilute HCl produced 4 and a dihydrido species, [Ir(PTAH)4(H)2]Cl5 (5), which were readily separated by inspection due to their different crystal habits. Compound 5 crystallizes in the triclinic space group P1 with a = 12.4432(9) A, b = 12.5921(9) A, c = 16.3231(12) A, alpha = 76.004(1) degrees, beta = 71.605(1) degrees, gamma = 69.177(1) degrees, and Z = 2. Complex 5 exhibits a distorted octahedral geometry with two hydride ligands in a cis configuration. A rationale consistent with these reactions is presented by consideration of the steric and electronic properties of the PTA ligand.

Atom transfer reactions of (TTP)Ti(eta 2-3-hexyne): synthesis and molecular structure of trans-(TTP)Ti[OP(Oct)3]2.

Atom and group transfer reactions were found to occur between heterocumulenes and (TTP)Ti(eta 2-3-hexyne), 1 (TTP = meso-5,10,15,20-tetra-p-tolylporphyrinato dianion). The imido derivatives (TTP)Ti=NR (R = iPr, 2; tBu, 3) were produced upon treatment of complex 1 with iPrN=C=NiPr, iPrNCO, or tBuNCO. Reactions between complex 1 and CS2, tBuNCS, or tBuNCSe afforded the chalcogenido complexes, (TTP)Ti=Ch (Ch = Se, 4; S, 5). Treatment of complex 1 with 2 equiv of PEt3 yielded the bis(phosphine) complex, (TTP)Ti(PEt3)2, 6. Although (TTP)Ti(eta 2-3-hexyne) readily abstracts oxygen from epoxides and sulfoxides, the reaction between 1 and O=P(Oct)3 did not result in oxygen atom transfer. Instead, the paramagnetic titanium(II) derivative (TTP)Ti[O=P(Oct)3]2, 7, was formed. The molecular structure of complex 7 was determined by single-crystal X-ray diffraction: Ti-O distance 2.080(2) A and Ti-O-P angle of 138.43(10) degrees. Estimates of Ti=O, Ti=S, Ti=Se, and Ti=NR bond strengths are discussed.

Syntheses of four D- and L-hexoses via diastereoselective and enantioselective dihydroxylation reactions.

An expeditious approach to various protected hexoses has been developed by the use of the Sharpless catalytic asymmetric dihydroxylation reaction. Applying the Sharpless catalytic asymmetric dihydroxylation reaction on vinylfuran, diols with high enantioexcess are produced. The resulting diols can be stereoselectively transformed into either protected D- or L-mannose in five steps and approximately 39% yield from furfural. Similarly, both D- and L-talose and gulose have been synthesized in 19% overall yields, respectively. Using a modified strategy, both protected D- and L-gulo- and allo-sugar-delta-lactones were synthesized in eight steps and approximately 20%, overall yield from furfural.

O2 activation by nonheme iron complexes: A monomeric Fe(III)-Oxo complex derived from O2.

Iron species with terminal oxo ligands are implicated as key intermediates in several synthetic and biochemical catalytic cycles. However, there is a dearth of structural information regarding these types of complexes because their instability has precluded isolation under ambient conditions. The isolation and structural characterization of an iron(III) complex with a terminal oxo ligand, derived directly from dioxygen (O2), is reported. A stable structure resulted from placing the oxoiron unit within a synthetic cavity lined with hydrogen-bonding groups. The cavity creates a microenvironment around the iron center that aids in regulating O2 activation and stabilizing the oxoiron unit. These cavities share properties with the active sites of metalloproteins, where function is correlated strongly with site structure.

Antineoplastic agents 430. Isolation and structure of cribrostatins 3, 4, and 5 from the republic of maldives cribrochalina species.

Continued investigation of cancer-cell growth-inhibitory constituents of the blue marine sponge Cribrochalina sp. has led to discovery of cribrostatins 3 (4a), 4 (5), and 5 (4b) in 10(-5) to 10(-7) % of the wet weight. The structure of cribrostatin 3 (4a) was determined by results of high field (500 MHz) (1)H and (13)C NMR and HRMS interpretations. The same general approach to the structures of cribrostatins 4 (5) and 5 (4b) was completed by X-ray crystal structure determinations. Cribrostatins 3, 4, and 5 provided significant cancer cell line inhibitory activities. Cribrostatins 1 and 2(2) and the newly isolated cribrostatins 3-5 displayed antibacterial and/or antifungal activities.

Ligand macrocycle structural effects on copper-dioxygen reactivity.

With the goal of understanding how the nature of the tridentate macrocyclic supporting ligand influences the relative stability of isomeric mu-eta 2:eta 2-peroxo- and bis(mu-oxo)dicopper complexes, a comparative study was undertaken of the O2 reactivity of Cu(I) compounds supported by the 10- and 12-membered macrocycles, 1,4,7-R3-1,4,7-triazacyclodecane (R3TACD; R = Me, Bn, iPr) and 1,5,9-triisopropyl-1,5,9-triazacyclododecane (iPr3TACDD). While the 3-coordinate complex [(iPr3TACDD)Cu]SbF6 was unreactive with O2, oxygenation of [(R3TACD)Cu(CH3CN)]X (R = Me or Bn; X = ClO4- or SbF6-) at -80 degrees C yielded bis(mu-oxo) species [(R3TACD)2Cu2(mu O)2]X2 as revealed by UV-vis and resonance Raman spectroscopy. Interestingly, unlike the previously reported system supported by 1,4,7-triisopropyl-1,4,7-triazacyclononane (iPr3TACN), which yielded interconverting mixtures of peroxo and bis(mu-oxo) compounds (Cahoy, J.; Holland, P. L.; Tolman, W. B. Inorg. Chem. 1999, 38, 2161), low-temperature oxygenation of [(iPr3TACD)Cu(CH3CN)]SbF6 in a variety of solvents cleanly yielded a mu-eta 2:eta 2-peroxo product, with no trace of the bis(mu-oxo) isomer. The peroxo complex was characterized by UV-vis and resonance Raman spectroscopy, as well as an X-ray crystal structure (albeit of marginal quality due to disorder problems). Intramolecular attack at the alpha C-H bonds of the substituents was indicated as the primary decomposition pathway of the oxygenated compounds through examination of the decay kinetics and the reaction products, which included bis(mu-hydroxo)- and mu-carbonato-dicopper complexes that were characterized by X-ray diffraction. A rationale for the varying results of the oxygenation reactions was provided by analysis of (a) the X-ray crystal structures and electrochemical behavior of the Cu(I) precursors and (b) the results of theoretical calculations of the complete oxygenated complexes, including all ligand atoms, using combined quantum chemical/molecular mechanics (integrated molecular orbital molecular mechanics, IMOMM) methods. The size of the ligand substituents was shown to be a key factor in controlling the relative stabilities of the peroxo and bis(mu-oxo) forms, and the nature of this influence was shown by both theory and experiment to depend on the ligand macrocycle ring size.

Crystal structures of a family of silver cyanide complexes of thiourea and substituted thioureas.

The syntheses and crystal structures of a family of silver cyanide complexes of thiourea and substituted thioureas are reported. The sulfur ligands include thiourea (tu), 1-methyl-2-thiourea (mtu), 1,3-dimethyl-2-thiourea (dmtu), 1,1,3,3-tetramethyl-2-thiourea (tmtu), and 2-imidazolidinethione (N,N'-ethylenethiourea, etu). Synthesis was effected by dissolving AgCN in an aqueous solution of ligand. Two different complexes were obtained by the reaction of AgCN with tu. Complex 1a: (AgCN)(tu), monoclinic, P2(1)/c, a = 9.3851 (6) A, b = 8.2782 (5) A, c = 7.1178 (5) A, beta = 94.591 (1) degree, and Z = 4. Complex 1b: (AgCN)(tu)2, triclinic, P1, a = 7.9485 (14) A, b = 9.431 (2) A, c = 12.771 (2) A, alpha = 85.695 (3) degrees, beta = 81.210 (4) degrees, gamma = 77.987 (2) degrees, and Z = 4. Complex 2: (AgCN)(mtu), triclinic, P1, a = 4.113 (2) A, b = 9.472 (4) A, c = 9.679 (4) A, alpha = 113.918 (5) degrees, beta = 98.188 (6) degrees, gamma = 97.725 (6) degrees, and Z = 2. Complex 3 (AgCN)2(dmtu)2, monoclinic, P2(1)/m, a = 7.1482 (7) A, b = 14.776 (2) A, c = 7.3366 (7) A, beta = 92.418 (2) degrees, and Z = 2. Complex 4: (AgCN)(tmtu), orthorhombic, P2(1)2(1)2(1), a = 8.823(6) A, b = 10.209 (2) A, c = 10.362 (2) A, and Z = 4. Complex 5: (AgCN)2(etu)2, triclinic, P1, a = 6.8001 (2) A, b = 8.6154 (1) A, c = 13.4747 (3) A, alpha = 71.720 (1) degree, beta = 79.906 (1) degree, gamma = 75.885 (2) degrees, and Z = 2. All of the structures involve either one- or two-dimensional polymeric arrays held together by bridging S and CN groups. There is, however, no similarity between any two of the arrays. Four of the five ligands used also form similar complexes with CuCN. For one ligand, tmtu, the structures are isomorphous. For the other three, not only are the structures not isomorphous, the m/n ratio in (MCN)mLn when M is Ag is different from that when M is Cu.

Seven-coordinate [ReVON4X2]+ complexes (X = O and Cl).

The oxorhenium(V) complexes with ligands containing N4 (H2pmen) and N4O2 (H2bbpen, H2Clbbpen, and H2bped) donor atom sets have been synthesized. X-ray crystallographic analyses of the [ReO(H2pmen)Cl2]+, [ReO(bbpen)]+, and [ReO(bped)]+ complexes showed that all three cations share a rare seven-coordinate structure with a distorted pentagonal bipyramidal geometry, which represents a novel and potentially general structural motif in ReV = O complexes. 1H NMR spectroscopy shows that the structures of the complexes are retained in the solution.

The first noncoordinated phosphonium diylide, [Me2P(C13H8)2]-, and its ylidic and cationic counterparts: synthesis, structural characterization, and interaction with the heavy group 2 metals.

Treatment of potassium or lithium fluorenide with MePCl2 generates the organophosphine MeP(C13H9)2, which on reaction with methyl iodide produces the phosphonium species [Me2P(C13H9)2]I in 74% yield. In the solid state, H...I contacts of < 3.3 A help generate a layered structure in which the fluorenyl rings are nearly parallel. On subsequent reaction of [Me2P(C13H9)2]I with either KH or K[N(SiMe3)2], the corresponding neutral phosphoylide, Me2P(C13H9)(C13H8), forms in 67% yield and was structurally characterized. The phosphonium iodide [Me2P(C13H9)2]I was allowed to react with Ae[N(SiMe3)2]2 (Ae = Ca, Ba), and the product from the reaction with the calcium complex was structurally identified as the salt [CaI(thf)5][Me2P(C13H8)2]. The anion, which is outside the coordination sphere of the calcium, represents the first structurally authenticated example of a free phosphonium diylide. The P-C(ylidic) bond length of 1.748(4) A reflects some partial multiple bond character. 1H and 31P NMR spectra suggest that the barium analogue is similar. Density functional theory calculations were performed on representative phosphonium diylides as an aid to interpreting the bonding in this class of compounds. Despite the strong electrostatic attraction that usually drives metal-ligand binding in highly ionic systems, calcium and barium prefer to coordinate to a single iodide ion and several neutral oxygen donors rather than to the charged diylide.