Efficient nanostructured materials to reduce nutrient leaching to overcome environmental contaminants.

Nutrient leaching is a major reason for fresh and ground water contamination. Menthol is the major bioactive ingredient of Mentha arvensis L. and one of the most traded products of global essential oil market. The indigenous production of menthol crystals in developing countries of the world can prove to be the backbone for local growers and poor farmers. Therefore, present research was designed to check the effects of nano-structured plant growth regulators (PGRs) (28-homobrassinolide and ethephon) with reduced leaching potentials on the essential oil and menthol (%) of Mentha arvensis L. The prepared nano-formulations were characterized by Fourier transform infrared (FTIR) spectroscopy, Laser induced breakdown spectroscopy (LIBS), Differential scanning colorimetry-thermal gravimetric analysis (DSC-TGA), Scanning electron microscopy (SEM), Atomic absorption spectrometry (AAS) and Zeta potential and Zeta size analysis. The menthol (%) was determined by modified spectrophotometric and gas chromatographic (GC) method. The highest essential oil (%) was obtained by the application of 28-homobrassinolide-Zn-NPs-L-II (0.92 ± 0.09%) and ethephon-Ca-NPs-L-III (0.91 ± 0.05%) as compared to the control (0.65 ± 0.03%) and blank (0.62 ± 0.09%). The highest menthol (%) was obtained by applying 28-homobrassinolide-Ca-NPs-L-I (80.06 ± 0.07%), 28-homobrassinolide-Ca-NPs-L-II (80.48 ± 0.09%) and 28-homobrassinolide-Ca-NPs-L-III (80.84 ± 0.11%) and ethephon-Ca-NPs-L-III (81.53 ± 0.17%) and ethephon-Zn-NPs-L-II (81.93 ± 0.26%) as compared to control (67.19 ± 0.14%) and blank (63.93 ± 0.17%).

Exploring Non-Toxic Lower Dimensional Perovskites for Next-Generation X-Ray Detectors.

Owing to their extraordinary photophysical properties, organometal halide perovskites are emerging as a new material class for X-ray detection. However, the existence of toxic lead makes their commercialization questionable and should readily be replaced. Accordingly, several lead alternatives have been introduced into the framework of conventional perovskites, resulting in various new perovskite dimensionalities. Among these, Pb-free lower dimensional perovskites (LPVKs) not only show promising X-ray detecting properties due to their higher ionic migration energy, wider and tunable energy bandgap, smaller dark currents, and structural versatility but also exhibit extended environmental stability. Herein, first, the structural organization of the PVKs (including LPVKs) is summarized. In the context of X-ray detectors (XDs), the outstanding properties of the LPVKs and active layer synthesis routes are elaborated afterward. Subsequently, their applications in direct XDs are extensively discussed and the device performance, in terms of the synthesis method, device architecture, active layer size, figure of merits, and device stability are tabulated. Finally, the review is concluded with an in-depth outlook, thoroughly exploring the present challenges to LPVKs XDs, proposing innovative solutions, and future directions. This review provides valuable insights into optimizing non-toxic Pb-free perovskite XDs, paving the way for future advancements in the field.

Structural determinants of phytoremediation capacity in saltmarsh halophyte Diplachne fusca (L.) P. Beauv. ex Roem. & Schult. subsp. fusca.

Micro and macro-morphological features contribute to plants' tolerance to a variety of environmental pollutants. The contribution of such structural modifications in the phytoremediation potential of Diplachne fusca populations collected from five saline habitats were explored when treated with 100 to 400 mM NaCl for 75 days along with control. Structural modifications in the populations from the highest salinity included development of aerenchyma in stem instead of chlorenchyma, absence of excretory hairs in stem, and exceptionally large trichomes on the leaf surface to help excretion of excess salt. Large parenchyma cells provided more space for water and solute storage, while broad metaxylem vessels were linked to better conduction water and nutrients, which ultimately excreted via glandular hairs, microhairs, and vesicular hairs. Broad metaxylem vessels and exceptionally long hairs observed in the populations collected from 52 dS m-1. In conclusion, large stem aerenchyma, exceptionally large trichomes on the leaf surface, and tightly packed outer cortical region in roots with intensive sclerification just inside the epidermis accompanied with salt excretion via glandular hairs, microhairs, and vesicular hairs were the main anatomical modifications involved in the phytoremediation potential of D. fusca in hyper-saline environments.

Morpho-anatomical characteristics of the differently adapted populations of Diplachne fusca has never been reported. In particular, structural variation in their mechanism of adaptation for salinity tolerance was investigated for the first time in current study.

A critical review on global CO2 emission: where do industries stand?

Global CO2 emissions from different industries have been increasing at an alarming rate. This growth is outpacing the efforts, nations are putting in place to reduce their carbon footprints. In this topical review, we critically analyze the level of CO2 emissions on a global scale and across various industries and activities within them and the dominant anthropogenic forcing instability. The global CO2 emission from various economic sectors such as industries, transportation and variety of waste sources were traced globally and regionally. To contextualize our review, the sector wise CO2 emission trends data for a period more than a decade is reviewed which highlighted the main sources of emissions. The data shows the overall reduction of carbon footprints and its progress across various sectors is very limited. The governing factors for this continued global pattern can be ascribed to two main factors: high consumer demands, and poor efforts towards shifting low and zero carbon services across all sectors. Some efforts have been witnessed to shift towards clean fuels and renewables, particularly in Europe and North America. However, rapid growth in industrialization limits the shifting of fossil-based energy systems towards less harmful systems. In Asia, particularly in eastern, southern, and south-eastern regions, the carbon footprints were found to increased owing to a huge demand for materials production, travelling and energy services. Therefore, it is of utmost importance to identify, understand and tackle the most persistent and climate-harmful factors across all industries and drive such policies to substitute the fossil fuels with renewables.

Recent advances in biodecolorization and biodegradation of environmental threatening textile finishing dyes.

Organic nature of dyes and their commercially made products are widely utilized in many industries including paper, cosmetics, pharmaceuticals, photography, petroleum as well as in textile manufacturing. The textile industry being the top most consumer of a large variety of dyes during various unit processes operation generates substantial amount of wastewater; hence, nominated as "Major Polluter of Potable Water". The direct discharge of such effluents into environment poses serious threats to the functioning of biotic communities of natural ecosystems. The detection of these synthetic dyes is considered as relatively easy, however, it is extremely difficult to completely eliminate them from wastewater and freshwater ecosystems. Aromatic chemical structure seems to be the main reason behind low biodegradability of these dyes. Currently, various physiochemical and biological methods are employed for their remediation. Among them, microbial degradation has attracted greater attention due to its sustainability, high efficiency, cost effectiveness, and eco-friendly nature. The current review presents recent advances in biodegradation of industrial dyes towards a sustainable and tangible technological innovative solutions as an alternative to existing conventional physicochemical treatment processes.

Thermally induced oxygen related defects in eco-friendly ZnFe2O4 nanoparticles for enhanced wastewater treatment efficiencies.

Herein, a simple but highly effective strategy of thermal annealing to modulate oxygen vacancies related defects in ZnFe2O4 (ZFO) nanoparticles for obtaining enhanced wastewater treatment efficiencies is reported. The as-prepared nanoparticles were thermally annealed at three different temperatures (500 °C, 600 °C and 700 °C) and their phase purity was confirmed by X-ray diffraction (XRD). All samples were found to exhibit pure phases of ZFO with different crystallite sizes ranging from 10 nm to 25 nm. The transmission electron microscope (TEM) images showed well dispersed nanoparticles and a strong correlation of grain size growth with annealing temperature was established. The optical absorption and emission characteristics were estimated through UV-visible and Photoluminescence (PL) spectroscopy. Raman spectroscopy and X-ray Photoelectron Spectroscopy (XPS) confirmed the variation of oxygen vacancies in the synthesized samples' lattice. The photocatalytic activities of all samples were investigated and the highest efficiencies were recorded for the ZFO samples annealed at 500 °C. Under high salinity condition, the organic dye degradation efficiency of the same sample remained the highest among all. The excellent dye degradation abilities in ZFO samples can be attributed to the abundance of oxygen vacancies in the crystal lattice that slow down the recombination rate during the photocatalysis process. Moreover, cytotoxicity tests revealed that all prepared ZFO samples showed insignificant cell structure effects on Picochlorum sp microalgae, as verified by Fourier-transform infrared (FTIR) spectroscopy. On the other hand, no significant changes were detected on the viable cell concentration and Chlorophyll a content. This work presents a systematic way to finely tune the crystal sizes and to modulate oxygen related defects in ZFO through a highly effective annealing approach to signify their potential in industrial wastewater and seawater treatment processes.

Environmental impact assessment of plastic waste during the outbreak of COVID-19 and integrated strategies for its control and mitigation.

During the COVID-19 pandemic, many positive shifts have been observed in the ecosystem, with a significant decrease in the greenhouse gas emissions and air pollution. On the other hand, there were unavoidable negative shifts due to a surge in demand for plastic products such as food and groceries' delivery packaging, single-use plastics, medical and personal protective equipment to prevent transmission of COVID-19. Plastic pollution can be considered as a key environmental issue in world due to the huge footprints of plastics on natural ecosystems and public health. Herein, we presented an overview on the rise of plastic pollution during the COVID-19 pandemic. The potential sources of plastic waste during COVID-19 with its negative effects on the environment such as marine ecosystems and the global economics are highlighted. We also suggested some strategies and recommendations to tackle plastic leakages by applying feedstock recycling, sterilization, and with the use of biodegradable plastics that have become a sustainable alternative to fossil fuel plastics. Also, the importance of elevating public awareness and some recommendations to mitigate plastic generated during the pandemic has been addressed as well.

Marginal quality water arbitrated essential oil contents in metal hoarded flower petals of scented roses.

Climate change and the consequent alteration in agricultural circumstances enhance the susceptibility of fresh water use particularly in water-scarce regions. Marginal quality water reuse is a common alternative practice but possible perils of metal accretion in plant parts are mostly ignored. The present research aimed to probe the impact of treated wastewater (TWW) and untreated wastewater (UTWW) on metal accumulation in flower petals and their influence on essential oil contents of fragrant Rosa species (R. Gruss-an-teplitz, R. bourboniana, R. centifolia, R. damascena) in a peri-urban area of Faisalabad, Pakistan during January, 2017 to December, 2018. The mineral and chemical contents in canal water (CW) and TWW were less than recommended levels of national environmental quality standards (NEQS) for wastewater of Pakistan. The experimentally UTWW possessed higher electrical conductivity (EC), biological and chemical oxygen demand (BOD and COD), and some metals (Pb, Co, Cr) that were above the permissible levels. The experimental data revealed that except Cr other metals contents in the flower petals were less than the WHO recommended limits (for medicinal plants) under experimental irrigation regimes. Rosa centifolia and R. damascena possessed higher metal i.e. Zn, Cu, Pb, Cr, Co contents while Fe and Ni contents were higher in R. Gruss-an-Teplitz and R. bourboniana respectively. There were twelve constituents which were detected in essential oil by gas chromatography. Major constituents were phenyl ethyl alcohol, citronellol, geranyl acetate, γ- undelactone, methyl eugenol, and limonene whose share was 48.17%, 41.11%, 8.46%, 4.82%, 4.44%, and 4.15% respectively whereas concentrations of other 06 constituents were less than 3.7%. Phenyl ethyl alcohol, lion shared constituent of essential oil was found highest (48.17%) in R. Gruss-an-Teplitz whereas minimum level was recorded in R. damascena (28.84%) under CW. In contrast, citronellol (chief component of fragrance) was highest in R. damascena (41.11%) in UTWW while the lowest level was found in R. Gruss-an-Teplitz (17.41%) in CW. This study confirmed the variations in metal concentrations of Rosa species due to different absorbability of each metal in flower petals. It also indicates that wastewater did not affect the composition but there were quantitative differences in aroma constituents and chemical composition of essential oil.

River Tea Tree Oil: Composition, Antimicrobial and Antioxidant Activities, and Potential Applications in Agriculture.

Melaleuca is one of the genera of the Myrtaceae family enriched in tea tree oil (TTO). Tea tree oils of Melaleuca bracteata and Melaleuca alternifolia are of prime importance and have antioxidant and antimicrobial properties. Terpinen-4-ol and 1-8 cineole are major constituents of M. alternifolia oil. The percentages of the compounds in the oils can slightly vary according to the region of plant harvest, the distillation technique, or the part of the plant used for oil extraction. TTO has a bactericidal effect against various bacterial species such as Bacillus cereus, B. subtilis, E. coli, Pseudomonas putida, and S. aureus. Several reports proved that this essential oil is also effective against fungal strains of Fusarium, Aspergillus, and Candida species. It also has antioxidant properties such as radical scavenging activity and reducing power. The antioxidant properties of TTO at a concentration of 30 mM were observed to be greater than those of butylated hydroxytoluene (BHT), commonly used as a synthetic antioxidant. TTO is also an effective organic fungicide, herbicide, and insecticide for use in the agriculture sector. Postharvest application of the oil has been found efficient on sweet basil, citrus, and strawberry. It is concluded that tea tree oil has the potential to be used in the food, agriculture, and pharmaceutical industries as a natural antimicrobial and preservative agent. This review provides comprehensive information regarding the antioxidant and antimicrobial activities of tea tree oil and its potential applications in agriculture.

Biochar, Compost, and Biochar-Compost Blend Applications Modulate Growth, Photosynthesis, Osmolytes, and Antioxidant System of Medicinal Plant Alpinia zerumbet.

Alpinia zerumbet (Zingiberaceae) is a unique ornamental and medicinal plant primarily used in food ingredients and traditional medicine. While organic amendments such as biochar (BC) and compost (Co) have been demonstrated to improve plant productivity, no studies have examined their effects on the growth, physiology, and secondary metabolites of A. zerumbet. This study evaluated the impact of the amendment of BC, Co, or a biochar and compost mixture (BC+Co) on modifying and improving the growth, photosynthesis, antioxidant status, and secondary metabolism of A. zerumbet grown on sandy loam soil. The morpho-physiological and biochemical investigation revealed variation in the response of A. zerumbet to organic amendments. The amendment of BC and BC+Co significantly increased net photosynthetic rates of plants by more than 28%, chlorophyll a and b contents by 92 and 78%, respectively, and carboxylation efficiency by 50% compared with those grown in the sandy loam soil without amendment. Furthermore, the amendment significantly decreased plant oxidative stress, measured as leaf free proline and glycine betaine. Enzymatic antioxidant activity, total phenols, and flavonoids also varied in their response to the organic amendments. In conclusion, this study shows that BC and/or Co amendments are an efficient and sustainable method for improving the metabolite contents and reducing oxidative stress in A. zerumbet.

Application of Trehalose and Salicylic Acid Mitigates Drought Stress in Sweet Basil and Improves Plant Growth.

Trehalose (Tre) and salicylic acid (SA) are increasingly used to mitigate drought stress in crop plants. In this study, a pot experiment was performed to study the influence of Tre and SA applied individually or in combination on the growth, photosynthesis, and antioxidant responses of sweet basil (Ocimum basilicum L.) exposed to drought stress. Basil plants were watered to 60% or 100% field capacity with or without treatment with 30 mM Tre and/or 1 mM SA. Drought negatively affected growth, physiological parameters, and antioxidant responses. Application of Tre and/or SA resulted in growth recovery, increased photosynthesis, and reduced oxidative stress. Application of Tre mitigated the detrimental effects of drought more than SA. Furthermore, co-application of Tre and SA largely eliminated the negative impact of drought by reducing oxidative stress through increased activities of antioxidant enzymes superoxide dismutase, peroxidase, and catalase, as well as the accumulation of the protective osmolytes proline and glycine betaine. Combined Tre and SA application improved water use efficiency and reduced the amount of malondialdehyde in drought-stressed plants. Our results suggested that combined application of Tre and SA may trigger defense mechanisms of sweet basil to better mitigate oxidative stress induced by drought stress, thereby improving plant growth.

Halide Perovskites: A New Era of Solution-Processed Electronics.

Organic-inorganic mixed halide perovskites have emerged as an excellent class of materials with a unique combination of optoelectronic properties, suitable for a plethora of applications ranging from solar cells to light-emitting diodes and photoelectrochemical devices. Recent works have showcased hybrid perovskites for electronic applications through improvements in materials design, processing, and device stability. Herein, a comprehensive up-to-date review is presented on hybrid perovskite electronics with a focus on transistors and memories. These applications are supported by the fundamental material properties of hybrid perovskite semiconductors such as tunable bandgap, ambipolar charge transport, reasonable mobility, defect characteristics, and solution processability, which are highlighted first. Then, recent progresses on perovskite-based transistors are reviewed, covering aspects of fabrication process, patterning techniques, contact engineering, 2D versus 3D material selection, and device performance. Furthermore, applications of perovskites in nonvolatile memories and artificial synaptic devices are presented. The ambient instability of hybrid perovskites and the strategies to tackle this bottleneck are also discussed. Finally, an outlook and opportunities to develop perovskite-based electronics as a competitive and feasible technology are highlighted.

Genetic assessment of the effects of self-fertilization in a Lilium L. hybrids using molecular cytogenetic methods (FISH and ISSR).

Self-fertilization (also termed selfing) is a mode of reproduction that occurs in hermaphrodites and has evolved several times in various plant and animal species. A transition from outbreeding to selfing in hermaphroditic flowers is typically associated with changes in flower morphology and functionality. This study aimed to identify genetic effects of selfing in the F2 progeny of F1 hybrid developed by crossing Lilium lancifolium with the Asiatic Lilium hybrid 'Dreamland.' Fluorescence in situ hybridization (FISH) and inter-simple sequence repeats (ISSR) techniques were used to detect genetic variations in plants produced by selfing. The FISH results showed that F1 hybrid were similar to the female parent (L. lancifolium) regarding the 45S loci, but F2 individuals showed variation in the number and location of the respective loci. In F2 progeny, F2-2, F2-3, F2-4, F2-5, and F2-8 hybrids expressed two strong and one weak 5S signal on chromosome 3, whereas F2-7 and F2-9 individuals expressed one strong and two weak signals. Only two strong 5S signals were detected in an F2-1 plant. The ISSR results showed a maximum similarity value of 0.6269 between the female parent and the F2-2 hybrid. Regarding similarity to the male parent, a maximum value of 0.6119 was found in the F2-1 and F2-2 hybrids. The highest genetic distance from L. lancifolium and the Asiatic Lilium hybrid 'Dreamland' was observed in the F2-4 progeny (0.6352 and 0.7547, respectively). Phylogenetic relationships showed that the F2 progeny were closer to the male parent than to the female parent. Self-fertilization showed effects on variation among the F2 progeny, and effects on the genome were confirmed using FISH and ISSR analyses.

Optimizing Surface Chemistry of PbS Colloidal Quantum Dot for Highly Efficient and Stable Solar Cells via Chemical Binding.

The surface chemistry of colloidal quantum dots (CQD) play a crucial role in fabricating highly efficient and stable solar cells. However, as-synthesized PbS CQDs are significantly off-stoichiometric and contain inhomogeneously distributed S and Pb atoms at the surface, which results in undercharged Pb atoms, dangling bonds of S atoms and uncapped sites, thus causing surface trap states. Moreover, conventional ligand exchange processes cannot efficiently eliminate these undesired atom configurations and defect sites. Here, potassium triiodide (KI3) additives are combined with conventional PbX2 matrix ligands to simultaneously eliminate the undercharged Pb species and dangling S sites via reacting with molecular I2 generated from the reversible reaction KI3 â‡Œ I2 + KI. Meanwhile, high surface coverage shells on PbS CQDs are built via PbX2 and KI ligands. The implementation of KI3 additives remarkably suppresses the surface trap states and enhances the device stability due to the surface chemistry optimization. The resultant solar cells achieve the best power convention efficiency of 12.1% and retain 94% of its initial efficiency under 20 h continuous operation in air, while the control devices with KI additive deliver an efficiency of 11.0% and retains 87% of their initial efficiency under the same conditions.

Comparison of Soaking Corms with Moringa Leaf Extract Alone or in Combination with Synthetic Plant Growth Regulators on the Growth, Physiology and Vase Life of Sword Lily.

Gladiolus is in demand worldwide as a cut-flower or landscaping plant, because of its superior commercial and ornamental value. Application of plant-based biostimulants has gained interest in the horticulture industry as an innovative and promising approach to ensure enhanced and sustainable yields along with better product quality. The influence of pre-plant corm soaks supplemented to 5% (v/v) with an aqueous extract from Moringa oleifera leaves (MLE) either alone or in combination with 50 mg/L salicylic acid (SA) or 50 mg/L gibberellic acid (GA) on the vegetative, physiological, and ornamental characteristics of potted gladiolus (Gladiolus grandiflorus) was investigated. In general, the treatment order for greatest horticultural value for all the parameters examined was: MLE + SA + GA > MLE + GA or SA individually > MLE alone > water-only control. Compared to other treatments, corms soaked in MLE + SA + GA had the earliest sprout time (3.7 days earlier than control), shortest production time (11 days earlier than control), tallest plant (159.5 cm), greatest number of leaves per plant (8.85 leaves), greatest maximum leaf area (66 cm2), highest SPAD reading (112) and photosynthetic activity (6.7 mmol m-2 s-1), longest spike length (91 cm), greatest number of florets per spike (20 florets), longest vase life (14.8 days), greatest N (1.53%), P (0.28%), and K (0.64%) concentrations, and largest corm diameter (4.68 cm) and mass (22.25 g). The highest total protein and proline concentrations were observed with the combined application of MLE + GA + SA. Our findings suggested that MLE either alone or in combination with other plant growth regulators not only increased the yield and quality of cut spikes, but also prolonged the vase life of cut gladiolus.

Molecular Markers Improve Abiotic Stress Tolerance in Crops: A Review.

Plants endure many abiotic stresses, such as temperature (heat or frost), drought, and salt. Such factors are primary and frequent stressors that reduce agriculture crop yields. Often alterations in nutrient management and constituents, along with variations in biosynthetic capacity, ultimately reduce or halt plant growth. Genetically, stress is an environmental condition that interferes with complete genetic expression. A vast range of molecular genomic markers is available for the analysis of agricultural crops. These markers are classified into various groups based on how the markers are used: RAPD (Random amplified polymorphic DNA) markers serve to identify and screen hybrids based on salinity and drought stress tolerance, while simple sequence repeat (SSR) markers are excellent for the assessment of stress tolerance. Such markers also play an important role in the QTL (Quantitative trait loci) mapping of stress-related genes. Dehydrins for drought and saltol for salinity stresses are primitive genes which regulate responses to these conditions. Further, a focus on traits using single-gene single nucleotide polymorphisms (SNP) markers supports genetic mapping and the sequencing of stress-related traits in inbred lines. DNA markers facilitate marker-assisted breeding to enhance abiotic stress tolerance using advanced techniques and marker modification.

Cadmium Partitioning, Physiological and Oxidative Stress Responses in Marigold (Calendula calypso) Grown on Contaminated Soil: Implications for Phytoremediation.

Marigold (Calendula calypso) is a multipurpose ornamental plant, but its cadmium (Cd) tolerance and phytoremediation potential is unknown. The proposed study was carried out to unravel Cd partitioning, physiological and oxidative stress responses of C. calypso grown under Cd stress. Plants were grown for four months in pots having different soil Cd levels: 0, 25, 50, 75, and 100 mg kg-1 soil. Plant growth, biomass, photosynthetic pigments, leaf water contents, stomatal conductance, and membrane stability index were not decreased at 25 mg kg-1 Cd. At higher levels of Cd stress, activities of antioxidant enzymes (SOD, APX, CAT, POD) increased to mitigate H2O2 and lipid peroxidation. Cadmium uptake in plants increased with increasing soil Cd levels, and roots accumulated a greater portion of Cd, followed by shoots and flowers, respectively. On the basis of Cd accumulation and its tolerance, it was determined that C. calypso can be successfully grown for phytostabilization of Cd contaminated soils.

Regulation of flowering time using temperature, photoperiod and spermidine treatments in Anoectochilus roxburghii.

This study investigated the effects of different temperatures, photoperiods and spermidine concentrations on the flowering time regulation of Anoectochilus roxburghii by measuring changes in the soluble sugar, soluble protein, malondialdehyde and proline contents, and the peroxidase, superoxide dismutase and catalase activities in A. roxburghii flower buds. The flowering time could be advanced under 25/20 °C (day/night), 16/8-h (day/night) long day conditions or low spermidine concentrations. The plants grew more rapidly and flowering rates were greater. The flowering time could be delayed under a low temperature of 20/15 °C or 8/16-h short day conditions, resulting in a low flowering rate. Under a high temperature of 30/25 °C or high spermidine concentrations, the plants could not flower normally and even died. There were significant differences in the seven measured indices among the various treatments. Thus, different treatments had significant effects on the flowering time regulation and flowering quality of A. roxburghii, providing a reliable theoretical basis for further studies on the flowering-related regulatory mechanisms of A. roxburghii.

Quantum-Dot Tandem Solar Cells Based on a Solution-Processed Nanoparticle Intermediate Layer.

Tandem cells are one of the most effective ways of breaking the single junction Shockley-Queisser limit. Solution-processable phosphate-buffered saline (PbS) quantum dots are good candidates for producing multiple junction solar cells because of their size-tunable band gap. The intermediate recombination layer (RL) connecting the subcells in a tandem solar cell is crucial for device performance because it determines the charge recombination efficiency and electrical resistance. In this work, a solution-processed ultrathin NiO and Ag nanoparticle film serves as an intermediate layer to enhance the charge recombination efficiency in PbS QD dual-junction tandem solar cells. The champion devices with device architecture of indium tin oxide/S-ZnO/1.45 eV PbS-PbI2/PbS-EDT/NiO/Ag NP/ZnO NP/1.22 eV PbS-PbI2/PbS-EDT/Au deliver a 7.1% power conversion efficiency, which outperforms the optimized reference subcells. This result underscores the critical role of an appropriate nanocrystalline RL in producing high-performance solution-processed PbS QD tandem cells.

A review of the application of near-infrared spectroscopy to rare traditional Chinese medicine.

Near-infrared spectroscopy (NIRS) has become popular in the field of traditional Chinese medicine (TCM) due to its many practical advantages, such as providing rapid, accurate, and simultaneous analysis. This review is intended to provide up-to-date information on qualitative and quantitative NIRS analysis in TCM, especially rare TCM. By performing a substantial survey of the literature from China and abroad, we also combine our own studies on some rare TCMs using NIRS to review the application of NIRS in this field. Basic analytical methods and specific examples of NIRS demonstrates NIRS's ability in authenticity identification, species identification, geographic origin analysis, quantitative analysis, adulteration detection, rapid detection, and on-line monitoring of TCM, and illustrates the feasibility and effectiveness of NIRS applied in the quality control (QC) of TCM. Some disadvantages and prospects of NIRS are also discussed here in detail.