Prominin 1 Significantly Correlated with Bone Metastasis of Breast Cancer and Influenced the Patient's Prognosis.

Background: This study is aimed at identifying the important biomarkers associated with bone metastasis (BM) in breast cancer (BRCA). Methods: The GSE175692 dataset was used to detect significant differential expressed genes (DEGs) between BRCA samples with or without BM, and DEG-related pathways were then explored. Further, we constructed the protein-protein interaction (PPI) network on GEGs and filtered 5 vital nodes. We then performed the Cox regression, Kaplan-Meier analysis, nomogram, and ROC curve to filter the most significant prognosis genes. The GSE14020 and GSE124647 datasets were used to verify the expression and prognostic value of hub genes, respectively. Finally, the gene set enrichment analysis (GSEA) was performed to reveal the potential mechanism. Results: Totally, 74 DEGs were detected, which mainly correlated with infectious disease, signaling molecules, and interaction. The 5 important DEGs were then filtered, and the Cox regression further showed that 2 genes, including prominin 1 (PROM1) and C-C motif chemokine ligand 2 (CCL2), were related to the prognosis of BRCA metastasis patients. Especially, PROM1 presented a better prognostic performance on the survival probability of patients than CCL2. Verification analysis further confirmed the abnormal expression and significant prognostic influence of PROM1. Finally, GSEA revealed that PROM1 was negatively related to IGF1 and mTOR pathways in BRCA metastasis. Conclusion: PROM1 was an important biomarker associated with BRCA bone metastasis and affected the prognosis of metastatic BRCA patients. It may play a vital role in metastatic BRCA by negatively regulating IGF1 and mTOR pathways.

Interface Engineering of Co-LDH@MOF Heterojunction in Highly Stable and Efficient Oxygen Evolution Reaction.

The electrochemical splitting of water into hydrogen and oxygen is considered one of the most promising approaches to generate clean and sustainable energy. However, the low efficiency of the oxygen evolution reaction (OER) acts as a bottleneck in the water splitting process. Herein, interface engineering heterojunctions between ZIF-67 and layered double hydroxide (LDH) are designed to enhance the catalytic activity of the OER and the stability of Co-LDH. The interface is built by the oxygen (O) of Co-LDH and nitrogen (N) of the 2-methylimidazole ligand in ZIF-67, which modulates the local electronic structure of the catalytic active site. Density functional theory calculations demonstrate that the interfacial interaction can enhance the strength of the Co-Oout bond in Co-LDH, which makes it easier to break the H-Oout bond and results in a lower free energy change in the potential-determining step at the heterointerface in the OER process. Therefore, the Co-LDH@ZIF-67 exhibits superior OER activity with a low overpotential of 187 mV at a current density of 10 mA cm-2 and long-term electrochemical stability for more than 50 h. This finding provides a design direction for improving the catalytic activity of OER.

Decreased plasma n6 : n3 polyunsaturated fatty acids ratio interacting with high C-peptide promotes non-alcoholic fatty liver disease in type 2 diabetes patients.

AIMS/INTRODUCTION: To explore relationships between polyunsaturated fatty acids (PUFA) and non-alcoholic fatty liver disease (NAFLD) in patients with type 2 diabetes, and whether insulin action has an interactive effect with PUFA on NAFLD progression. MATERIALS AND METHODS: We extracted clinical and omics data of 482 type 2 diabetes patients from a tertiary hospital consecutively from April 2018 to April 2019. NAFLD was estimated by ultrasound at admission. Plasma fasting n3 and n6 fatty acids were quantified by liquid chromatography-tandem mass spectrometry analysis. Restricted cubic spline nested in binary logistic regression was used to select the cut-off point, and estimate odds ratios and 95% confidence intervals. Additive interactions of the n6 : n3 ratio with insulin action for NAFLD were estimated using relative excess risk due to interaction, attributable proportion due to interaction and synergy index. Relative excess risk due to interaction >0, attributable proportion due to interaction >0 or synergy index >1 indicates biological interaction. Spearman correlation analysis was used to obtain partial correlation coefficients between PUFA and hallmarks of NAFLD. RESULTS: Of 482 patients, 313 were with and 169 were without NAFLD. N3 ≥800 and n6 PUFA ≥8,100 µmol/L were independently associated with increased NAFLD risk; n6 : n3 ratio ≤10 was associated with NAFLD (odds ratio 1.80, 95% confidence interval 1.20-2.71), and the effect size was amplified by high C-peptide (odds ratio 8.89, 95% confidence interval 4.48-17.7) with significant interaction. The additive interaction of the n6 : n3 ratio and fasting insulin was not significant. CONCLUSION: Decreased n6 : n3 ratio was associated with increased NAFLD risk in type 2 diabetes patients, and the effect was only significant and amplified when there was the co-presence of high C-peptide.

Posterior C1-C2 screw-rod fixation and autograft fusion for the treatment of os odontoideum with C1-C2 instability.

OBJECTIVE: To report our experience treating os odontoideum with C1-C2 instability via C1-C2 screw-rod fixation and autograft fusion and to explore the clinical efficacy of such a treatment strategy. PATIENTS AND METHODS: We retrospectively reviewed the medical records of patients who were diagnosed with os odontoideum with C1-C2 instability and treated by posterior C1-C2 screw-rod fixation and fusion. Neurological deficits were measured with the Japanese Orthopedic Association (JOA) scoring system and neck pain was assessed using the Visual Analogue Scale (VAS) score. Fusion was determined based on the presence of bridging bone in computed tomography (CT) imaging, whereas stability was determined based on the lack of movement in dynamic radiographs. RESULTS: Thirty-two patients (18 males) were included in the study. The surgery was successfully accomplished in all patients. Thirty (93.8%) patients had confirmed C1-C2 bony fusion in CT images and all patients (100%) were stable in dynamic radiographs. The mean preoperative JOA score was 14.3±1.4 (range 11-16); at the final visit, it increased to 16.2±0.8 (range 14-17) (p<0.001). The mean preoperative VAS score was 3.8±0.7 (range 3-5) and decreased at the final visit to 1.0±0.6 (range 0-2) (p<0.001). CONCLUSION: Our treatment strategy (C1-C2 screw-rod fixation and autograft fusion) can achieve excellent clinical results with minor complications for patients with os odontoideum with C1-C2 instability.

Posterior atlantoaxial fusion with a screw-rod system: Allograft versus iliac crest autograft.

OBJECTIVE: To compare the effectiveness of allograft and iliac crest autograft in atlantoaxial fusion. PATIENTS AND METHODS: Between January 2012 and December 2012, 41 consecutive patients underwent posterior atlantoaxial fusion with a screw-rod fixation system in our spine center. The choice to use allograft or iliac crest autograft was made by the patient himself or herself after being informed about the advantages and disadvantages of both methods. In the allograft group, we used mixed material of morcellized demineralized freeze-dried bone allograft and local autograft for posterior atlantoaxial fusion. In the autograft group, we used the morcellized iliac crest autograft for fusion. Patients underwent regular follow up including CT scans and dynamic radiographs 6 months postoperatively and every 6 months thereafter until study completion or confirmation of fusion. RESULTS: Twenty-four patients underwent posterior atlantoaxial fusion with allograft, and 17 underwent fusion with autograft. All patients were followed up for at least 24 months. At the final follow-up visit, only two (8.3%) patients in the allograft group had confirmed posterior bony fusion on CT imaging while 15 (88.2%) patients in the autograft group had confirmed posterior bony fusion. None of the 41 patients had movement on the dynamic radiographs. CONCLUSIONS: Allograft is not reliable for posterior atlantoaxial fusion even with the rigid internal fixation of modern constructs. Autograft remains the first choice for atlantoaxial fusion despite the donor-site morbidity. The assessment of fusion based on a lack of movement on dynamic radiographs is not reliable. The confirmation of fusion should be based on the presence of bridging bone on CT imaging.

A morphometric study of the middle and lower cervical vertebral endplates and their components.

Cervical disc arthroplasty is a common method of treating cervical degenerative disease. However, the footprints of most prosthesis dimensions are obtained from data of Caucasian individuals. Besides, there is a large discrepancy between footprints of currently available cervical disc prostheses and anatomic dimensions of cervical endplates. We aimed to detail the three-dimensional (3D) anatomic morphology of the subaxial cervical vertebral endplate, utilizing high-precision, high-resolution scanning equipment, and provide a theoretical basis for designing appropriate disc prostheses for Chinese patients.A total of 138 cervical vertebral endplates were studied. Each endplate was digitized using a non-contact optical 3D range scanning system and then reconstructed to quantify diameters and surface area for the whole endplate and its components (central endplate and epiphyseal rim). The whole endplate and mid-plane concavity depth were measured.There is marked morphologic asymmetry, in that the cranial endplate is more concave than the corresponding caudal endplate, with endplate concavity depths of 2.04 and 0.69 mm, respectively. For the caudal endplates, the endplate concavity apex locations were always located in the posterior portion (81.42%), while in cranial endplates relatively even. The central endplate was approximately 60% of the area of the whole endplate and the anterior section of the ring was the widest. From C3/4 down to C6/7 discs, the vertebral endplate gradually became more elliptical. Chinese cervical endplate anatomic sizes are generally smaller than that of Caucasians. Although Korean and Chinese individuals both belong to the Asian population subgroup, the majority of anatomic dimensions differ. Singaporean cervical endplate morphology is very similar to that of Chinese patients.We performed a comprehensive and accurate quantitative description of the cervical endplate, which provide references to shape and profile an artificial cervical disc without sacrificing valuable bone stock. To design a device with footprint as large as possible to distribute the axial load, we suggest that additional attention should be paid to the marginal rim. It is essential to specifically design appropriate disc prosthesis for Chinese patients. To fit the morphologic and biomechanical variations, we also propose that the disc prostheses for different vertebral segments should be separately designed.

Can tranexamic acid reduce blood loss in cervical laminectomy with lateral mass screw fixation and bone grafting: a retrospective observational study.

To assess the safety and efficacy of tranexamic acid (TXA) for decreasing perioperative blood loss in cervical laminectomy with lateral mass screw fixation and bone grafting (CLF), in which all surgical procedures are identical.From November 2014 to April 2016, we performed a retrospective comparative analysis of 119 patients with multilevel cervical spondylotic myelopathy who had undergone a CLF from C3 to C6 in our center. All surgeries were performed on the patients using a consistent, standard procedure. Patients were divided into control (46) and TXA (73) groups according to whether or not they had received TXA treatment before and during surgery. Demographic profiles of patients such as gender, age, body weight, height, and body mass index were collated and differences between the 2 groups compared. Preoperative and postoperative hematological data in addition to intraoperative and postoperative blood loss were compared between the 2 groups. Additionally, any complications of TXA were also evaluated to assess safety.There was no statistically significant difference in demographic traits between the 2 groups. Intraoperative blood loss in the TXA group (179.66 ±â€Š81.45 mL) was significantly lower than that of the control group (269.13 ±â€Š94.68 mL, P < 0.001), as was postoperative blood loss (108.08 ±â€Š44.31 and 132.83 ±â€Š49.39 mL, respectively; P = 0.005). Total blood loss in the TXA group (287.74 ±â€Š115.40 mL) was also significantly lower than that of the control group (401.96 ±â€Š127.88, P < 0.01). No major intraoperative complications occurred in any of the cases.TXA significantly reduced perioperative blood loss in CLF with no major side effects.

Percutaneous kyphoplasty versus posterior spinal fixation with vertebroplasty for treatment of Kümmell disease: A case-control study with minimal 2-year follow-up.

This is a retrospective case-control study.The aim of this study was to compare the surgical results of percutaneous kyphoplasty (KP) and posterior spinal fixation with vertebroplasty (PSF+VP) for treatment of Kümmell disease (KD).KD is rare form of post-traumatic delayed avascular necrosis of the vertebral body. It is reported that KP is an effect measure for treatment of KD. Some studies have recommended posterior spinal fixation with vertebroplasty for KD.A total of 100 patients with KD who underwent spinal surgery at our hospital were enrolled from January 2008 to December 2013. The inclusion criteria were monosegment lesion without neurological deficit; the segments are restricted to T11-L2; conservative treatment is invalid. The exclusion criteria were metastatic spinal tumors, infection, primary bone tumor, and multiple myeloma; bisegments and multi-segments; patients with neurological symptoms; the defect of posterior wall of vertebral body; the occupying of vertebral canal. The symptomatic vertebrae were restricted to T11-L2. Patients who were followed-up for less than 2 years after surgery were excluded. Finally, there are 25 patients in the KP group and 21 in the PSF+VP group. There were no significant differences in patient age, disease duration, or the length of follow-up between the 2 groups.Operative time (43.2 ±â€Š21.8 vs 230.6 ±â€Š87.1 minutes) was significantly longer and bleeding volume (5.3 ±â€Š3.1 vs 215.0 ±â€Š170.2 mL) significantly greater in the PSF+VP group. No significant difference between the 2 groups was observed in Visual analog scale score (VAS) (1.3 ±â€Š0.9 vs 1.2 ±â€Š0.9), Oswestry disability index score (ODI) (27.2 ±â€Š9.0 vs 26.0 ±â€Š6.3), and Cobb angle (17.0 ±â€Š7.2 vs 16.5 ±â€Š2.8). KP resulted in a shorter operation time, less bleeding volume, and fewer postoperative complications than PSF+VP.This study shows that both treatments KP and PSF+VP for KD can be safe and effective for the patients with monosegment lesion and without neurological deficit. However, KP show the advantages in a shorter surgical duration, less blood loss, and fewer postoperative complications.

A new cervical artificial disc prosthesis based on physiological curvature of end plate: a finite element analysis.

STUDY DESIGN: The study aimed to build a new cervical artificial disc C3-C7 segment prosthesis, and perform a biomechanical comparison between the new prosthesis and the Prestige LP prosthesis using a three-dimensional non-linear finite element (FE) model. PURPOSE: The study compared the biomechanical differences between the new cervical artificial disc prosthesis based on the physiological curvature of the end plate and the Prestige LP prosthesis after artificial disc replacement. BACKGROUND CONTEXT: There has been no prior research on artificial disc prostheses based on the physiological curvature of the end plate; studies of biomechanical changes after cervical disc arthroplasty (CDR) are few. METHODS: An FE model of the C3-C7 segments was developed and validated. A new cervical artificial disc prosthesis based on the physiological curvature of the end plate and the Prestige LP prosthesis were integrated at the C5-C6 segment into the validated FE model. All models were subjected to a follower load of 73.6 N and a 1 Nm in flexion-extension, lateral bending, and axial torsion. The segmental range of motion (ROM) and stress on the prostheses were analyzed. RESULTS: The ROM in most segments after CDR with new cervical artificial disc prosthesis was more similar to that of the normal cervical spine than the Prestige LP prosthesis. However, there was no significant difference between the two prostheses. The stress on the new artificial disc was significantly less than that in the Prestige LP prosthesis. CONCLUSIONS: There was no significant difference in ROM in all segments after CDR for the two prostheses. The stress on the new cervical artificial disc prosthesis based on the physiological curvature of the end plate was significantly less than that in the Prestige LP prosthesis. The new artificial disc prosthesis is feasible and effective, and can reduce the implant-bone interface stress on the end plate, which may be one of the causes of prosthesis subsidence.

Biomechanical Analysis of a Novel Prosthesis Based on the Physiological Curvature of Endplate for Cervical Disc Replacement.

STUDY DESIGN: Biomechanical analysis of a novel prosthesis based on the physiological curvature of endplate was performed. OBJECTIVE: To compare the biomechanical differences between a novel prosthesis based on the physiological curvature of the endplate and the Prestige LP prosthesis after cervical disc replacement (CDR). SUMMARY OF BACKGROUND DATA: Artificial disc prostheses have been widely used to preserve the physiological function of treated and adjacent motion segments in CDR, while most of those present a flat surface instead of an arcuate surface which approximately similar to anatomic structures in vivo. We first reported a well-designed artificial disc prosthesis based on the physiological curvature of the endplate. METHODS: Three motion segments of 24 ovine cervical spines (C2-5) were evaluated in a robotic spine system with axial compressive loads of 50N. Testing conditions were as follows: 1) intact, 2) C3-4 CDR with artificial disc prosthesis based on the physiological curvature of the endplate, and 3) C3-4 CDR with the Prestige LP prosthesis. The range of motion (ROM) and the pressures on the inferior surface of the two prostheses were recorded and analyzed. RESULTS: As compared to the intact state, the ROM of all three segments had no significant difference in the replacement group. Additionally, there was no significant difference in ROM between the two prostheses. The mean pressure on the novel prosthesis was significantly less than the Prestige LP prosthesis. CONCLUSION: ROM in 3 groups (intact group, CDR group with novel prosthesis and CDR group with Prestige LP) showed no significant difference. The mean pressure on the inferior surface of the novel prosthesis was significantly lower than the Prestige LP prosthesis. Therefore, the novel artificial disc prosthesis is feasible and effective, and can reduce the implant-bone interface pressure on the endplate, which may be one possible reason of prosthesis subsidence.

The Role of Posterior Longitudinal Ligament in Cervical Disc Replacement: An Ovine Cadaveric Biomechanical Analysis.

BACKGROUND Cervical disc replacement (CDR) has been widely used to restore and maintain mobility and function of the treated and adjacent motion segments. Posterior longitudinal ligament (PLL) resection has been shown to be efficient in anterior cervical decompression and fusion. However, less is known about the biomechanical effect of PLL removal versus preservation in cervical disc arthroplasty. MATERIAL AND METHODS Three motion segments of 24 ovine cervical spines (C2-C5) were evaluated in a robotic spine system with axial compressive loads of 50 N. These cervical spines were divided in three groups according to the following conditions: (1) intact spine, (2) C3/C4 CDR with the Prestige LP prosthesis and PLL preservation, and (3) C3/C4 CDR with the Prestige LP prosthesis and PLL removal. The ranges of motion (ROMs) were recorded and analyzed in each group. RESULTS The C3/C4 ROM in group 3 (CDR with PLL removed) increased significantly in flexion-extension and axial rotation compared with group 1 (intact spine). Moreover, in flexion-extension, the mean total ROM was significantly larger in group 3 than in group 1. All the ROM observed in group 2 (CDR with PLL preserved) did not significantly differ from the ROM observed in group 1. CONCLUSIONS Compared with intact spines, CDR with PLL removal partly increased ROM. Moreover, the ROM in CDR with PLL preservation did not significantly differ from the ROM observed in intact spines. The PLL appears to contribute to the balance and stability of the cervical spine and should thus be preserved in cervical disc replacement provided that the posterior longitudinal ligament is not degenerative and the compression can be removed without PLL takedown.

A rapid thin-layer chromatography bioautographic method for detecting the monoamine oxidase inhibitors in plants.

It is well known that the isolation of monoamine oxidase (MAO) inhibitors from natural sources is an important strategy for drug development in the treatment of depression, Parkinson's disease and Alzheimer's disease. The present work describes developing a thin-layer chromatography (TLC) bioautographic method for detecting MAO inhibitors from plant extracts. The basic principle of the method is that the enzyme oxidises tryptamine into an aldehyde which in turn reacts with 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyltetrazolium bromide to form a blue formazan which makes a blue-coloured background on the TLC plates. Inhibitors of MAO produced white spots on the background. The new TLC bioautographic method has several advantages such as lower consumption of the enzyme, shorter experimental time, more easily observed background of TLC plate and better reproducibility. The detection limits were 10 ng for several known MAO inhibitors.