Fluidized Reduction Kinetics of Boron-Bearing Iron Concentrate by Hydrogen at Low Temperatures Based on Model-Fitting and Model-Free Methods.

Pyrometallurgy is the most effective way to comprehensively utilize boron-bearing iron concentrate, and there is an urgency for an environmentally friendly and efficient method to achieve the prereduction of boron-bearing iron concentrate. In this study, the mechanism and kinetics of isothermal hydrogen reduction of boron-bearing iron concentrate in a fluidized bed at 500-570 °C were discussed. The reduction degree was quantified in combination with the online gas composition analysis technique, and the phase and microstructure of the reduced products were characterized. The results exhibited that the apparent activation energy remained constant during the whole reduction process, with average values of 50.67 and 48.08 kJ/mol calculated by the model-free and model-fitting methods, respectively, and the reaction was controlled by the contracting sphere model. The formation of a microporous metallic iron facilitated the rapid penetration of hydrogen to the reaction interface. Therefore, the intrinsic chemical reaction at the interface determined the whole reaction process.

Corticosteroid in IgA nephropathy with moderate proteinuria: A retrospective cohort study.

BACKGROUND: Corticosteroids remain contentious as a therapeutic option for IgA nephropathy. We conducted a retrospective cohort study to explore whether corticosteroid therapy is efficient and safe for IgAN patients with moderate proteinuria. METHODS: A total of 336 patients with renal biopsy-confirmed IgAN, estimated glomerular filtration (eGFR) over 15 mL/min/1.73 m2 and urine protein levels of 0.75-3.5 g/d were enrolled. According to the treatment protocol, we classified the enrolled patients into two groups: one receiving corticosteroids and the other receiving supportive care. Complete remission, partial remission, and no remission were applied to describe the efficacy assessments. The endpoint was defined as a 40% reduction in eGFR, the onset of ESRD, or renal disease-related death. RESULTS: Clinical and pathological progression risk factors were higher in corticosteroid-treated individuals. Logistic regression analysis revealed that the corticosteroid group was considerably related to a higher remission rate after adjustment for confounding factors. The occurrence of serious adverse events between the two groups was not found to be statistically significantly different. Then, we matched 95 couples of patients with similar baseline levels in both groups by propensity score matching. The results showed that corticosteroid-treated patients showed higher overall and complete remission rates than untreated patients. However, due to the relatively short follow-up period, no significant differences in the incidence of endpoint and survival analyses have been observed thus far. CONCLUSION: Corticosteroid therapy may benefit IgAN patients with moderate proteinuria via proteinuria reduction and renal function preservation.

Design of Thick Electrodes with Vertical Channels for Aqueous Batteries: Experimental and Numerical Analysis.

Developing thick electrodes with high-area loadings is a direct method for boosting the energy density. However, this approach also leads to a proportional increase in the resistance to charge transport. Optimizing the microstructure of the electrode can effectively enhance the charge transport kinetics in thick electrodes. Herein, a low-tortuosity nickel electrode with vertical channels (VC-Ni) is fabricated using a phase inversion method. A high-loading VC-Ni electrode (26.7 mg cm-2) delivers a superior specific capacity of 134.0 mAh g-1 at a 5 C rate, significantly outperforming the conventional nickel electrode (Con-Ni). Numerical simulations reveal the fast transport kinetics within the vertical channel electrodes. For the thick electrode, the VC-Ni electrode shows a substantially lower concentration gradient of OH- and H+ compared to the Con-Ni electrode. Notably, beyond a critical loading of 26.5 mg cm-2, the specific capacity initially increases with volume fraction, peaking at 50%, and then diminishes. The specific capacity increases as the channel size decreases, but the tendency to increase gradually decreases. The highest specific capacity is achieved with an inverted trapezoidal channel shape, characterized by larger pores near the separator and smaller pores near the current collector. This work is of guidance for the design of thick electrodes for high-performance aqueous batteries.

Asymmetric Electrode Design for High-Area Capacity and High-Energy Efficiency Hybrid Zn Batteries.

Compared to Zn-air batteries, by integrating Zn-transition metal compound reactions and oxygen redox reactions at the cell level, hybrid Zn batteries are proposed to achieve higher energy density and energy efficiency. However, attaining relatively higher energy efficiency relies on controlling the discharge capacity. At high area capacities, the proportion of the high voltage section can be neglected, resulting in a lower energy efficiency similar to that of Zn-air batteries. Here, a high-loading integrated electrode with an asymmetric structure and asymmetric wettability is fabricated, which consists of a thick nickel hydroxide (Ni(OH)2) electrode layer with vertical array channels achieving high capacity and high utilization, and a thin NiCo2O4 nanopartical-decorated N-doped graphene nanosheets (NiCo2O4/N-G) catalyst layer with superior oxygen catalytic activity. The asymmetric wettability satisfies the wettability requirements for both Zn-Ni and Zn-air reactions. The hybrid Zn battery with the integrated electrode exhibits a remarkable peak power density of 141.9 mW cm-2, superior rate performance with an energy efficiency of 71.4% even at 20 mA cm-2, and exceptional cycling stability maintaining a stable energy efficiency of ≈84% at 2 mA cm-2 over 100 cycles (400 h).

Neutrophil Percentage-to-Albumin Ratio and Risk of Mortality in Patients on Peritoneal Dialysis.

Background: Neutrophil percentage-to-albumin ratio (NPAR), a new inflammatory marker, has been shown to be associated with poor prognosis in patients with cardiovascular disease. However, limited evidence is available for its role in peritoneal dialysis (PD) patients. Our study aimed at investigating the prognostic value of NPAR for mortality in PD patients. Patients and Methods: This was a single center retrospective cohort study. A total of 1966 PD patients were enrolled in our study from January 2006 to December 2016 and were followed up until December 2021. Patients were stratified into tertiles according to baseline NPAR levels. The associations between NPAR levels with all-cause and cardiovascular mortality were estimated using Cox proportional hazards models. Receiver operating characteristic (ROC) analysis was performed to compare the mortality predictive values of NPAR and other known biomarkers, such as NLR (neutrophil-to-lymphocyte ratio), PLR (platelet-to-lymphocyte ratio), LHR (low-density lipoprotein cholesterol-to-high-density lipoprotein cholesterol ratio) and MLR (monocyte-to-lymphocyte ratio). Results: During a median follow-up of 48.1 months, 503 (25.6%) patients died, in which cardiovascular disease (CVD) death dominated 50.3%. Multivariate Cox regression analysis revealed that the highest NPAR tertile was significantly associated with a higher risk of all-cause and cardiovascular mortality (HR 1.51, 95% CI 1.14-1.98; HR 1.57, 95% CI 1.07-2.31; respectively) compared with tertile 1. The AUC values of NPAR were 0.62 (95% CI 0.60-0.65, P < 0.001) for all-cause mortality and 0.61 (95% CI 0.57-0.65, P < 0.001) for cardiovascular mortality. Conclusion: Our study showed that higher NPAR levels were independently associated with increased risk of all-cause and cardiovascular mortality in PD patients. Notably, our results demonstrated that NPAR exhibited superior predictive value for mortality compared to NLR, PLR, MLR, and LHR.

Left ventricular strain and myocardial work in short-term peritoneal dialysis patients.

BACKGROUND: Initiation of dialysis encompasses new cardiovascular challenges on patients with end-stage renal disease (ESRD). This study used two-dimensional speckle-tracking echocardiography (2D-STE) to investigate the change of left ventricular (LV) myocardial function undergoing peritoneal dialysis (PD) within 1-3 months. METHODS: A total of 56 patients with ESRD and 27 healthy controls were enrolled in this prospective study. Mean duration of PD was 44.41 ± 16.44 days. We evaluated LV myocardial function of patients with ESRD in baseline and within 1-3 months after PD by 2D-STE with global longitudinal strains (GLS) and myocardial work (MW). Based on the level of serum phosphate before PD, patients were divided into two groups: the group with normal serum phosphate or hyperphosphatemia. RESULTS: Compared with healthy controls, patients with ESRD had impaired GLS (p < .001) and increased global work index (GWI) (p = .034), global constructive work (GCW) (p < .001), global wasted work (GWW) (p < .001), and lower global work efficiency (GWE) (p = .002). After PD therapy, GWI (p = .001), GCW (p < .001), and GWW (p = .023) decreased and closed to healthy subjects (p > .05) and no significant improvement was observed in GLS (p = .387). GLS of basal segments worsened in the hyperphosphatemia group (p = .005) and GWW reduced remarkably in the group with normal serum phosphate after PD treatment (p = .008). The change of left ventricular internal diameter in diastole (LVIDd) was the only parameter influenced GWI in post-dialysis patients (ß = 0.324, p = .013). CONCLUSIONS: Short-term PD treatment improved LV MW in ESRD patients. They benefited more when receiving treatment before the increase of serum phosphorus.

Group 3 Innate Lymphoid Cells Exacerbate Lupus Nephritis by Promoting B Cell Activation in Kidney Ectopic Lymphoid Structures.

Group 3 innate lymphoid cells (ILC3s) represent a new population in immune regulation, yet their role in lupus nephritis (LN) remains elusive. In the present work, systemic increases in ILC3s, particularly in the kidney, are observed to correlate strongly with disease severity in both human and murine LN. Using MRL/lpr lupus mice and a nephrotoxic serum-induced LN model, this study demonstrates that ILC3s accumulated in the kidney migrate predominantly from the intestine. Furthermore, intestinal ILC3s accelerate LN progression, manifested by exacerbated autoimmunity and kidney injuries. In LN kidneys, ILC3s are located adjacent to B cells within ectopic lymphoid structures (ELS), directly activating B cell differentiation into plasma cells and antibody production in a Delta-like1 (DLL1)/Notch-dependent manner. Blocking DLL1 attenuates ILC3s' effects and protects against LN. Altogether, these findings reveal a novel pathogenic role of ILC3s in B cell activation, renal ELS formation and autoimmune injuries during LN, shedding light on the therapeutic value of targeting ILC3s for LN.

The feasibility and efficiency for constructing arteriovenous fistula with <2 mm vein-a systematic review and meta-analysis.

Background: Autogenous arteriovenous fistula (AVF) is an efficient hemodialysis access for patients with end-stage kidney disease (ESKD). The specific threshold of vein diameter still not reached a consensus. Method: We conducted a comprehensive search in PubMed, Embase, and Web of Science databases for articles which comparing the treatment outcomes of AVF with 2 mm as vein diameter threshold. Fixed and random effect model were used for synthesis of results. Subgroup analysis was designed to assess the risk of bias. Result: Eight high-quality articles were included finally. Among a total of 1,075 patients (675 males and 400 females), 227 and 809 patients possessed <2 mm and ≥2 mm vein respectively. Apart from gender and coronary artery disease (P < 0.05), there was no significant difference in age, diabetes, hypertension or radial artery between maturation and non-maturation groups. The functional maturation rate was lower in patients with <2 mm vein according to fixed effect model [OR = 0.19, 95% CI (0.12, 0.30), P < 0.01]. There was no significant difference in primary [OR = 0.63, 95% CI (0.12, 3.25), P = 0.58] or cumulative patency rates [OR = 0.40, 95% CI (0.13, 1.19), P = 0.10]. Conclusion: Vein diameter less than 2 mm has a negative impact on the functional maturation rate of AVF, while it does not affect the primary and cumulative patency rates (12 months).

Comparative analysis between the safety and efficacy of oral corticosteroids versus corticosteroids pulse therapies in IgA nephropathy.

OBJECTIVE: This study retrospectively compared the safety and efficacy of oral corticosteroid therapy (OCT) and corticosteroid pulse therapy (CPT) in the treatment of IgA nephropathy. METHODS: One ninety-two patients were diagnosed with IgA nephropathy and had an estimated glomerular filtration rate > 15mL/min/1.73m2 and 24-h urine protein level of 0.75-3.5g. Patients were divided into CPT and OCT groups according to the treatment protocol. The differences in the efficacy and safety between the two groups were assessed by logistic regression analysis and propensity score matching. RESULTS: Significant differences at baseline, including 24-h urine protein level and eGFR, were observed between the two groups. Logistic regression analysis indicated that the remission rate increased significantly, while the incidences of total adverse events and infections decreased in CPT group compared with the OCT group after adjusting the potential confounding factors. Forty-seven pairs of subjects are matched by using propensity score matching with similar baseline data. The results indicate that the total remission rate and complete remission rate were significantly higher, while the incidences of total adverse events were lower (p = 0.008) in the CPT group than in the OCT group. The subgroup analysis showed that CPT group was more likely to achieve remission in patients with initial 24-h urine protein levels falling into the range of 2-3.5 g and Oxford Classification of S1 or C1/2 (p < 0.05). CONCLUSION: Among patients with IgA nephropathy and 24-h urine protein levels of 0.75-3.5g, CPT may be more effective than OCT in reducing urinary protein levels and improving renal function with a lower incidence of adverse events.

Potential role of Schwann cells in neuropathic pain.

Neuropathic pain (NPP) is a common syndrome associated with most forms of disease, which poses a serious threat to human health. NPP may persist even after the nociceptive stimulation is eliminated, and treatment is extremely challenging in such cases. Schwann cells (SCs) form the myelin sheaths around neuronal axons and play a crucial role in neural information transmission. SCs can secrete trophic factors to nourish and protect axons, and can further secrete pain-related factors to induce pain. SCs may be activated by peripheral nerve injury, triggering the transformation of myelinated and non-myelinated SCs into cell phenotypes that specifically promote repair. These differentiated SCs provide necessary signals and spatial clues for survival, axonal regeneration, and nerve regeneration of damaged neurons. They can further change the microenvironment around the regions of nerve injury, and relieve the pain by repairing the injured nerve. Herein, we provide a comprehensive overview of the biological characteristics of SCs, discuss the relationship between SCs and nerve injury, and explore the potential mechanism of SCs and the occurrence of NPP. Moreover, we summarize the feasible strategies of SCs in the treatment of NPP, and attempt to elucidate the deficiencies and defects of SCs in the treatment of NPP.

Tailoring the Electrochemical Deposition of Zn by Tuning the Viscosity of the Liquid Electrolyte.

The issues during Zn deposition in rechargeable Zn-based batteries greatly hinder cycling stability. In this work, a simple and inexpensive approach to tailor the Zn electrodeposition is proposed by tuning the viscosity of the liquid electrolyte (LE). First, the growth mechanisms of Zn deposition under different electrolyte properties are investigated by numerical simulation, from which the bottom deposition tends to fuse with each other when there are more deposition sites, and the mass-transfer coefficient is lower, thus achieving uniform deposition. Besides, the whole process of Zn deposition in charging-discharging cycling is in situ observed by an optical microscope. It is found that the cause of the poor stability in the LE is due to the uneven Zn deposition, resulting in weak bonding between the deposition and the electrode surface, which is also the reason for the formation of dead Zn. In contrast, when an appropriate amount of the polymer is added to the LE to increase the viscosity, an appropriate overpotential can be created, generating more deposition sites. In addition, the viscosity reduces the mass-transfer coefficient, making the distance from the ion to the deposition sites the main controlling factor. The Zn ions are more inclined to move in the direction of electric field lines, which results in a uniform and dense deposition layer. Furthermore, the effectiveness of this method is demonstrated in a Zn-LiFePO4 battery, from which the battery with the modified electrolyte condition still works properly even in the Zn utilization of 100% and shows a capacity retention rate (35%) of nearly twice that in the original LE condition (18%) after 10 cycles. This work provides a theoretical basis for Zn deposition and provides ideas for the future development of high-performance Zn-based batteries.

Effect of Mean Platelet Volume to Platelet Count Ratio on Mortality in Peritoneal Dialysis.

Background and Aims: Mean platelet volume to platelet count ratio (MPV/PC) has been found to be an independent risk factor for mortality in various diseases, including cardiovascular disease, cancer, and hemodialysis. We aimed to evaluate the association between MPV/PC and all-cause and cardiovascular (CV) mortality in peritoneal dialysis (PD) patients. Methods and Results: We conducted a retrospective cohort study at a single center and enrolled 1473 PD patients who were catheterized at our PD center from January 1, 2006, to December 31, 2013. All patients were divided into four groups according to the quartiles of baseline MPV/PC levels and followed up until December 31, 2018. A total of 453 patients died, and 221 deaths were caused by cardiovascular disease during a median follow-up time of 48.0 (21.9-82.2) months. There was a significant interaction by age of association between MPV/PC level and all-cause mortality (P = 0.009), and multivariate Cox regression analysis showed that higher MPV/PC level was related to a decreased risk of all-cause and CV mortality in PD patients aged < 60 years (HR = 0.62, 95%CI = 0.40 - 0.96, P = 0.032; HR = 0.49, 95%CI = 0.26 - 0.93, P = 0.029, respectively), rather than in patients aged ≥ 60 years (HR = 1.37, 95%CI = 0.84 - 2.22, P = 0.208; HR = 1.50, 95%CI = 0.77 - 2.92, P = 0.237, respectively). Conclusion: Our results indicated that low MPV/PC level was an independent risk factor for all-cause and CV mortality in PD patients aged less than 60 years.

Experimental Realization and Computational Investigations of B2S2 as a New 2D Material with Potential Applications.

A new two-dimensional material B2S2 has been successfully synthesized for the first time and validated using first-principles calculations, with fundamental properties analyzed in detail. B2S2 has a similar structure as transition-metal dichalcogenides (TMDs) such as MoS2, and the experimentally prepared free-standing B2S2 nanosheets show a uniform height profile lower than 1 nm. A thickness-modulated and unique oxidation-level dependent band gap of B2S2 is revealed by theoretical calculations, and vibration signatures are determined to offer a practical scheme for the characterization of B2S2. It is shown that the functionalized B2S2 is able to provide favorable sites for lithium adsorption with low diffusion barriers, and the prepared B2S2 shows a wide band photoluminescence response. These findings offer a feasible new and lighter member for the TMD-like 2D material family with potential for various aspects of applications, such as an anode material for Li-ion batteries and electronic and optoelectronic devices.

Circular RNAs as Novel Diagnostic Biomarkers and Therapeutic Targets in Kidney Disease.

Circular RNAs (circRNAs) are a novel type of non-coding RNAs that have aroused growing attention in this decade. They are widely expressed in eukaryotes and generally have high stability owing to their special closed-loop structure. Many circRNAs are abundant, evolutionarily conserved, and exhibit cell-type-specific and tissue-specific expression patterns. Mounting evidence suggests that circRNAs have regulatory potency for gene expression by acting as microRNA sponges, interacting with proteins, regulating transcription, or directly undergoing translation. Dysregulated expression of circRNAs were found in many pathological conditions and contribute to the pathogenesis and progression of various disorders, including renal diseases. Recent studies have revealed that circRNAs may serve as novel reliable biomarkers for the diagnosis and prognosis prediction of multiple kidney diseases, such as renal cell carcinoma (RCC), acute kidney injury (AKI), diabetic kidney disease (DKD), and other glomerular diseases. Furthermore, circRNAs expressed by intrinsic kidney cells are shown to play a substantial role in kidney injury, mostly reported in DKD and RCC. Herein, we review the biogenesis and biological functions of circRNAs, and summarize their roles as promising biomarkers and therapeutic targets in common kidney diseases.

Arid2-IR promotes NF-κB-mediated renal inflammation by targeting NLRC5 transcription.

Increasing evidence shows that long non-coding RNAs (lncRNAs) play an important role in a variety of disorders including kidney diseases. It is well recognized that inflammation is the initial step of kidney injury and is largely mediated by nuclear factor Kappa B (NF-κB) signaling. We had previously identified lncRNA-Arid2-IR is an inflammatory lncRNA associated with NF-κB-mediated renal injury. In this study, we examined the regulatory mechanism through which Arid2-IR activates NF-κB signaling. We found that Arid2-IR was differentially expressed in response to various kidney injuries and was induced by transforming growth factor beta 1(TGF-ß1). Using RNA sequencing and luciferase assays, we found that Arid2-IR regulated the activity of NF-κB signal via NLRC5-dependent mechanism. Arid2-IR masked the promoter motifs of NLRC5 to inhibit its transcription. In addition, during inflammatory response, Filamin A (Flna) was increased and functioned to trap Arid2-IR in cytoplasm, thereby preventing its nuclear translocation and inhibition of NLRC5 transcription. Thus, lncRNA Arid2-IR mediates NF-κB-driven renal inflammation via a NLRC5-dependent mechanism and targeting Arid2-IR may be a novel therapeutic strategy for inflammatory diseases in general.

Identification of Smad3-related transcriptomes in type-2 diabetic nephropathy by whole transcriptome RNA sequencing.

Smad3 deficiency prevents the development of type 2 diabetic nephropathy; however, the underlying molecular mechanisms remain unknown. In this study, we aimed to identify Smad3-related genes involved in the pathogenesis of diabetic kidney disease. High-throughput RNA sequencing was performed to profile the whole transcriptome in the diabetic kidney of Smad3 WT-db/db, Smad3 KO-db/db, Smad3+/- db/db and their littermate control db/m mice at 20 weeks. The gene ontology, pathways and alternative splicing of differentially expressed protein-coding genes and long non-coding RNAs related to Smad3 in diabetic kidney were analysed. Compared to Smad3 WT-db/db mice, Smad3 KO-db/db mice exhibited an alteration of genes associated with RNA splicing and metabolism, whereas heterozygosity deletion of Smad3 (Smad3+/- db/db mice) significantly altered genes related to cell division and cell cycle. Notably, three protein-coding genes (Upk1b, Psca and Gdf15) and two lncRNAs (NONMMUG023520.2 and NONMMUG032975.2) were identified to be Smad3-dependent and to be associated with the development of diabetic nephropathy. By using whole transcriptome RNA sequencing, we identified novel Smad3 transcripts related to the development of diabetic nephropathy. Thus, targeting these transcripts may represent a novel and effective therapy for diabetic nephropathy.

Identification of differentially expressed circulating exosomal lncRNAs in IgA nephropathy patients.

BACKGROUND: Although immunoglobulin A nephropathy (IgAN) is one of the foremost primary glomerular disease, treatment of IgAN is still in infancy. Non-invasive biomarkers are urgently needed for IgAN diagnosis. We investigate the difference in expression profiles of exosomal long non-coding-RNAs (lncRNAs) in plasma from IgAN patients compared with their healthy first-degree relatives, which may reveal novel non-invasive IgAN biomarkers. METHODS: We isolated exosomes from the plasma of both IgAN patients and their healthy first-degree relatives. High-throughput RNA sequencing and real-time quantitative polymerase chain reaction (qRT-PCR) was used to validate lncRNA expression profiles. Pathway enrichment analysis was used to predict their nearest protein-coding genes. RESULTS: lncRNA-G21551 was significantly down-regulated in IgAN patients. Interestingly, the nearest protein-coding gene of lncRNA-G21551 was found to be encoding the low affinity receptor of the Fc segment of immunoglobulin G (FCGR3B). CONCLUSIONS: Exosomal lncRNA-G21551, with FCGR3B as the nearest protein-coding gene, was down-regulated in IgAN patients, indicating its potential to serve as a non-invasive biomarker for IgAN.

High-Yield Production of Few-Layer Graphene via New-fashioned Strategy Combining Resonance Ball Milling and Hydrothermal Exfoliation.

Graphene shows great potential applications in functional coating, electrodes, and ultrasensitive sensors, but high-yield and scalable preparation of few-layer graphene (FLG) by mechanical exfoliation method is still a formidable challenge. In this work, a novel two-step method for high-yield preparation of FLG is developed by combining resonance ball milling and hydrothermal treatment. During the resonance ball milling process, the utilization of magnetic Fe3O4 nanoparticles as a new "particle wedge" is beneficial to facilitate fragment and delamination of graphitic layers. In addition, further hydrothermal treatment can enhance ball milling product (BMP) exfoliation because of the shear force driven by the Brownian motion of various molecules at high temperature and high pressure. As expected, the two-step method can have high exfoliation efficiency up to 92% (≤10 layers). Moreover, the FLG nanosheet ink can easily achieve the formation of FLG coatings on the surface of various substrates, resulting in good electrical conductivity, which possesses potential applications in various fields including functional coating, energy storages, and electrochemical sensors, etc. Our work provides a new-fashioned strategy for mechanical large-scale production of graphene.

Few-Layer Borophene Prepared by Mechanical Resonance and Its Application in Terahertz Shielding.

Once two-dimensional boron-based materials were forecasted, their excellent physical and chemical properties have realized attractive application value in the field of materials science. However, borophene could not exist independently and stably in nature. Molecular beam epitaxy is the only way being used currently for the preparation of borophene, which has low yield and harsh experimental installation conditions. Here, we propose the theory that few-layer borophene supported by silver nanoparticles can exist stably and large-scale preparation of few-layer borophene can be performed by mechanical resonance first. We have revealed that the structure of the prepared borophene is α-sheet and its thickness is less than 4 nm. The oxidation rate of borophene from the experiment is about 0.19, which indicates that the few-layer borophene possesses good structure stability. We have also studied the structure stability of borophene on silver nanoparticles by first principles calculation. The calculation proves that few-layer borophene can exist stably supported with silver nanoparticles. Furthermore, the terahertz shielding and stealth performance of the few-layer borophene have been explored. The maximum terahertz shielding effectiveness value of the prepared material could reach up to 50 and 21.5 dB for the reflection loss value in the broadband range of 0.1-2.7 THz. The large-scale preparation of few-layer borophene through the mechanical method makes it possible to study the properties of borophene and achieve low-cost large-scale applications, such as the study of terahertz shielding and stealth performance in the article, which facilitates the lightweight material design for terahertz shielding and stealth.

Finite element analysis of the effect of power arm locations on tooth movement in extraction space closure with miniscrew anchorage in customized lingual orthodontic treatment.

INTRODUCTION: More patients are choosing customized orthodontic appliances because of their excellent esthetics. It is essential that clinicians understand the biomechanics of the tooth movement tendency in customized lingual orthodontics. This study aimed to evaluate the tooth movement tendency during space closure in maxillary anterior teeth with the use of miniscrew anchorage in customized lingual orthodontics with various power arm locations. METHODS: Three-dimensional finite element models of the maxilla were created with miniscrews and power arms; the positions were varied to change the force directions. A retraction force (1.5 N) was applied from the top of the miniscrews to the selected points on the power arm, and the initial displacements of the reference nodes of the maxillary teeth were analyzed. RESULTS: After applying force in different directions, power arms located at the distal side of the canines led to larger initial lingual crown tipping and occlusal crown extrusion of the maxillary incisors compared with power arms located at the midpoint between the lateral incisors and canines, and caused a decreasing trend of the intercanine width. CONCLUSIONS: In customized lingual orthodontic treatment, power arms located at the distal side of the canines are unfavorable for anterior teeth torque control and intercanine width control. Power arms located at the midpoint between the lateral incisors and canines can get better torque control, but still cannot achieve excepted torque without extra torque control methods, no matter whether its force application point is higher than, lower than, or equal to the level of the top of the miniscrews.