A bacterial type III effector targets plant vesicle-associated membrane proteins.

The soilborne bacterial pathogen Ralstonia solanacearum is one of the most destructive plant pathogens worldwide, and its infection process involves the manipulation of numerous plant cellular functions. In this work, we found that the R. solanacearum effector protein RipD partially suppressed different levels of plant immunity triggered by R. solanacearum elicitors, including specific responses triggered by pathogen-associated molecular patterns and secreted effectors. RipD localized in different subcellular compartments in plant cells, including vesicles, and its vesicular localization was enriched in cells undergoing R. solanacearum infection, suggesting that this specific localization may be particularly relevant during infection. Among RipD-interacting proteins, we identified plant vesicle-associated membrane proteins (VAMPs). We also found that overexpression of Arabidopsis thaliana VAMP721 and VAMP722 in Nicotiana benthamiana leaves promoted resistance to R. solanacearum, and this was abolished by the simultaneous expression of RipD, suggesting that RipD targets VAMPs to contribute to R. solanacearum virulence. Among proteins secreted in VAMP721/722-containing vesicles, CCOAOMT1 is an enzyme required for lignin biosynthesis, and mutation of CCOAOMT1 enhanced plant susceptibility to R. solanacearum. Altogether our results reveal the contribution of VAMPs to plant resistance against R. solanacearum and their targeting by a bacterial effector as a pathogen virulence strategy.

The Ralstonia pseudosolanacearum effector RipE1 is recognized at the plasma membrane by NbPtr1, the Nicotiana benthamiana homologue of Pseudomonas tomato race 1.

The bacterial wilt disease caused by soilborne bacteria of the Ralstonia solanacearum species complex (RSSC) threatens important crops worldwide. Only a few immune receptors conferring resistance to this devastating disease are known so far. Individual RSSC strains deliver around 70 different type III secretion system effectors into host cells to manipulate the plant physiology. RipE1 is an effector conserved across the RSSC and triggers immune responses in the model solanaceous plant Nicotiana benthamiana. Here, we used multiplexed virus-induced gene silencing of the nucleotide-binding and leucine-rich repeat receptor family to identify the genetic basis of RipE1 recognition. Specific silencing of the N. benthamiana homologue of Solanum lycopersicoides Ptr1 (confers resistance to Pseudomonas syringae pv. tomato race 1) gene (NbPtr1) completely abolished RipE1-induced hypersensitive response and immunity to Ralstonia pseudosolanacearum. The expression of the native NbPtr1 coding sequence was sufficient to restore RipE1 recognition in Nb-ptr1 knockout plants. Interestingly, RipE1 association with the host cell plasma membrane was necessary for NbPtr1-dependent recognition. Furthermore, NbPtr1-dependent recognition of RipE1 natural variants is polymorphic, providing additional evidence for the indirect mode of activation of NbPtr1. Altogether, this work supports NbPtr1 relevance for resistance to bacterial wilt disease in Solanaceae.

A plasma membrane nucleotide-binding leucine-rich repeat receptor mediates the recognition of the Ralstonia pseudosolanacearum effector RipY in Nicotiana benthamiana.

Bacterial wilt disease caused by several Ralstonia species is one of the most destructive diseases in Solanaceae crops. Only a few functional resistance genes against bacterial wilt have been cloned to date. Here, we show that the broadly conserved type III secreted effector RipY is recognized by the Nicotiana benthamiana immune system, leading to cell death induction, induction of defense-related gene expression, and restriction of bacterial pathogen growth. Using a multiplexed virus-induced gene-silencing-based N. benthamiana nucleotide-binding and leucine-rich repeat receptor (NbNLR) library, we identified a coiled-coil (CC) nucleotide-binding and leucine-rich repeat receptor (CNL) required for recognition of RipY, which we named RESISTANCE TO RALSTONIA SOLANACEARUM RIPY (RRS-Y). Genetic complementation assays in RRS-Y-silenced plants and stable rrs-y knockout mutants demonstrated that RRS-Y is sufficient to activate RipY-induced cell death and RipY-induced immunity to Ralstonia pseudosolanacearum. RRS-Y function is dependent on the phosphate-binding loop motif of the nucleotide-binding domain but independent of the characterized signaling components ENHANCED DISEASE SUSCEPTIBILITY 1, ACTIVATED DISEASE RESISTANCE 1, and N REQUIREMENT GENE 1 and the NLR helpers NB-LRR REQUIRED FOR HR-ASSOCIATED CELL DEATH-2, -3, and -4 in N. benthamiana. We further show that RRS-Y localization at the plasma membrane is mediated by two cysteine residues in the CC domain and is required for RipY recognition. RRS-Y also broadly recognizes RipY homologs across Ralstonia species. Lastly, we show that the C-terminal region of RipY is indispensable for RRS-Y activation. Together, our findings provide an additional effector/receptor pair system to deepen our understanding of CNL activation in plants.

A Fast and Easy Method to Study Ralstonia solanacearum Virulence upon Transient Gene Expression or Gene Silencing in Nicotiana benthamiana Leaves.

Ralstonia solanacearum is a devastating soil-borne bacterial pathogen that causes disease in multiple host plants worldwide. Typical assays to measure virulence of R. solanacearum in laboratory conditions rely on soil-drenching inoculation followed by observation and scoring of disease symptoms. Here, we describe a novel inoculation protocol to analyze the replication of R. solanacearum upon infiltration into the leaves of Nicotiana benthamiana, in which gene expression has been altered using Agrobacterium tumefaciens. The protocol includes five major steps: 1) growth of N. benthamiana plants; 2) infiltration of A. tumefaciens; 3) R. solanacearum inoculation; 4) sample collection and bacterial quantitation; 5) data analysis and representation. The transient gene expression or gene silencing prior to R. solanacearum inoculation provides a straightforward way to perform genetic analysis of plant functions involved in the interaction between pathogen and host, using the appropriate combination of A. tumefaciens and R. solanacearum strains, with high sensitivity and accuracy provided by the quantitation of bacterial numbers in plant tissues.

Intra-strain Elicitation and Suppression of Plant Immunity by Ralstonia solanacearum Type-III Effectors in Nicotiana benthamiana.

Effector proteins delivered inside plant cells are powerful weapons for bacterial pathogens, but this exposes the pathogen to potential recognition by the plant immune system. Therefore, the effector repertoire of a given pathogen must be balanced for a successful infection. Ralstonia solanacearum is an aggressive pathogen with a large repertoire of secreted effectors. One of these effectors, RipE1, is conserved in most R. solanacearum strains sequenced to date. In this work, we found that RipE1 triggers immunity in N. benthamiana, which requires the immune regulator SGT1, but not EDS1 or NRCs. Interestingly, RipE1-triggered immunity induces the accumulation of salicylic acid (SA) and the overexpression of several genes encoding phenylalanine-ammonia lyases (PALs), suggesting that the unconventional PAL-mediated pathway is responsible for the observed SA biosynthesis. Surprisingly, RipE1 recognition also induces the expression of jasmonic acid (JA)-responsive genes and JA biosynthesis, suggesting that both SA and JA may act cooperatively in response to RipE1. We further found that RipE1 expression leads to the accumulation of glutathione in plant cells, which precedes the activation of immune responses. R. solanacearum secretes another effector, RipAY, which is known to inhibit immune responses by degrading cellular glutathione. Accordingly, RipAY inhibits RipE1-triggered immune responses. This work shows a strategy employed by R. solanacearum to counteract the perception of its effector proteins by plant immune system.

A bacterial effector protein prevents MAPK-mediated phosphorylation of SGT1 to suppress plant immunity.

Nucleotide-binding domain and leucine-rich repeat-containing (NLR) proteins function as sensors that perceive pathogen molecules and activate immunity. In plants, the accumulation and activation of NLRs is regulated by SUPPRESSOR OF G2 ALLELE OF skp1 (SGT1). In this work, we found that an effector protein named RipAC, secreted by the plant pathogen Ralstonia solanacearum, associates with SGT1 to suppress NLR-mediated SGT1-dependent immune responses, including those triggered by another R. solanacearum effector, RipE1. RipAC does not affect the accumulation of SGT1 or NLRs, or their interaction. However, RipAC inhibits the interaction between SGT1 and MAP kinases, and the phosphorylation of a MAPK target motif in the C-terminal domain of SGT1. Such phosphorylation is enhanced upon activation of immune signaling and contributes to the activation of immune responses mediated by the NLR RPS2. Additionally, SGT1 phosphorylation contributes to resistance against R. solanacearum. Our results shed light onto the mechanism of activation of NLR-mediated immunity, and suggest a positive feedback loop between MAPK activation and SGT1-dependent NLR activation.

[Determination of 18 polycyclic aromatic hydrocarbons in plastic products by ultra performance convergence chromatography].

A method for rapid determination of naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo (a) anthracene, chrysene, benzo(b) fluoranthene, benzo(k) fluoranthene, benzo(j) fluoranthene, benzo (e) pyrene, benzo (a) pyrene, indeno (1, 2, 3-cd) pyrene, dibenzo (a, h) anthracene, benzo (g, h, i) perylene in plastic products by ultra performance convergence chromatography (UPC2) coupled photodiode array detector (PAD) was developed. The 18 polycyclic aromatic hydrocarbons (PAHs) were successfully separated in less than 8.5 min on a Daicel IB-3 chiral column with a mobile phase of CO2, the mobile-phase additive of methanol/acetonitrile (25 :75, v/v) at column temperature of 40 degrees C, and a back pressure of 15.17 MPa. There was a linear correlation between peak area and PAH concentration in the range of 0.05-50 mg/L (r ≥ 0.999 5) for each PAH. The limits of quantification (LOQs)(S/N > 10) were 0.05 mg/L. After ultrasonic-assisted extraction in toluene, the sample was analyzed by UPC2-PDA. The recoveries of PAHs spiked in plastic samples were from 78.3% to 117.6%, and the repeatabilities of peak areas for the 18 PAHs were less than 5% (RSD, n = 5). The present UPC2-PDA method has the advantages of rapid speed, high resolution, and low organic reagent consumption.

Decyl-perfluorinated magnetic mesoporous microspheres for extraction and analysis perfluorinated compounds in water using ultrahigh-performance liquid chromatography-mass spectrometry.

In this work, the interior-walls decyl-perfluorinated functionalized magnetic mesoporous microspheres (F(17)-Fe(3)O(4)@mSiO(2)) were synthesized for the first time, and applied as adsorbents to extract and concentrate perfluorinated compounds (PFCs) from water samples. The fluorous functionalized interior pore-walls contributed to the high-selective preconcentration of PFCs due to fluorous affinity; and abundant silanol groups on the exterior surface of microspheres contributed to the good dispersibility in water sample. Four kinds of PFCs were selected as model analytes, including perfluorooctanoic acid, perfluorononanoic acid, perfluorododecanoic acid, and perfluorooctane sulphonate. In addition, UHPLC-ESI/MS/MS was introduced to the fast and sensitive detection of the analytes after sample pretreatment. Important parameters of the extraction procedure were optimized, including salinity, eluting solvent, the amount of F(17)-Fe(3)O(4)@mSiO(2) microspheres, and extraction time. The optimized procedure took only 10 min to extract analytes with high recoveries and merely 800-µL acetonitrile to elute analytes from the magnetic adsorbents. Validation experiments showed good linearity (0.994-0.998), precision (2.6-7.6%), high recovery (93.4-105.7%) of the proposed method, and the limits of detection were from 0.008 to 0.125 µg/L. The F(17)-Fe(3)O(4)@mSiO(2) magnetic microspheres have the advantages of great dispersibility in aqueous solution, high specificity of extraction, large surface area, and efficient separation ability. The results showed that the proposed method based on F(17)-Fe(3)O(4)@mSiO(2) microspheres is a simple, fast, and sensitive tool for the analysis of PFCs in water sample.

[Determination of five coumarins in toys by high performance liquid chromatography-tandem mass spectrometry].

A rapid analytical method for the determination of five coumarins (coumarin, 7-methoxycoumarin, dihydrocoumarin, 7-methyl coumarin and 7-ethoxy-4-methyl coumarin) in toys by high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) has been developed. After ultrasonic extraction in tetrahydrofuran, the samples were analyzed by HPLC-MS/MS in multi-reaction monitoring (MRM) mode. Acetonitrile and 0.1% acetic acid were used as the mobile phases with gradient elution. The linear ranges of calibration curves were 10 - 1 000 microg/L, and the limits of quantification (LOQ) (S/N > 10) were 2.0 microg/L for all the analytes, except that the LOQ for dihydrocoumarin was 5.0 microg/L. The recoveries of the five coumarins spiked in three types of samples were in the ranges of 93.2% - 105.8%, 97.3% - 103.2% and 96.8% - 102.9%, with the relative standard deviations in the ranges of 4.35% - 8.27%, 3.65% - 6.73% and 4.03% - 6.45%, respectively. The method was applied in the determination of 12 toy samples. The five analytes were found in 9 samples, and in some cases, the presence of quite high concentrations of these coumarins in the toys should be a matter of concern.

[Determination of 3 isothiazolinone preservatives in toys using liquid chromatography-tandem mass spectrometry].

A rapid analytical method for the determination of 3 isothiazolinone preservatives (2-methyl-4-isothiazolin-3-one, 5-chloro-2-methyl-4-isothiazolin-3-one and 1,2-benzylisothiazolin-3-one) in toys using liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been developed. After ultrasonic extraction with water, the analytes in the sample were separated and analyzed by LC-MS/MS under the isocratic elution of methanol and water (15:85, v/v) and in selected-reaction monitoring (SRM) mode. The linear ranges of calibration curves for the 3 analytes were 2.0 - 1 000 microg/L. The limit of quantification was 0.04 mg/kg for all the 3 analytes, which was lower than that of the method recommended by the European Toy Safety Directive in EN71-11-2005. The recoveries of the spiked standards in the two toy samples were 95.9% - 105.2% and 94.7% - 102.8% with the relative standard deviation ranges from 3.04% to 4.96% and from 2.36% to 4.79%, respectively. The method was applied in the determination of 10 toy samples, and the results can meet the requirements of the European Toy Safety Directive in EN71-9-2005 for the determination of isothiazolinones in toys.

Preparation of magnetic core mesoporous shell microspheres with C18-modified interior pore-walls for fast extraction and analysis of phthalates in water samples.

In this study, core-shell magnetic mesoporous microspheres with C18-functionalized interior pore-walls were synthesized through coating Fe(3)O(4) microspheres with a mesoporous inorganic-organic hybrid layer with a n-octadecyltriethoxysilane (C18TES) and tetraethyl orthosilicate (TEOS) as the silica source and cetyltrimethylammonia bromide (CTAB) as a template. The obtained C18-functionalized Fe(3)O(4)@mSiO(2) microspheres possess numerous C18 groups anchored in the interior pore-walls, large surface area (274.7 m(2)/g, high magnetization (40.8 emu/g) and superparamagnetism, uniform mesopores (4.1 nm), which makes them ideal absorbents for simple, fast, and efficient extraction and enrichment of hydrophobic organic compounds in water samples. Several kinds of phthalates were used as the model hydrophobic organic compounds to systematically evaluate the performance of the C18-functionalized Fe(3)O(4)@mSiO(2) microspheres in extracting hydrophobic molecules by using a gas chromatography-mass spectrometry. Various parameters, including eluting solvent, the amounts of absorbents, extraction time and elution time were optimized. Hydrophobic extraction was performed in the interior pore of magnetic mesoporous microspheres, and the materials had the anti-interference ability to macromolecular proteins, which was also investigated in the work. Under the optimized conditions, C18-functionalized Fe(3)O(4)@mSiO(2) microspheres were successfully used to analyze the real water samples. The results indicated that this novel method was fast, convenient and efficient for the target compounds and could avoid being interfered by macromolecules.

Preparation of Fe3O4@C@PANI magnetic microspheres for the extraction and analysis of phenolic compounds in water samples by gas chromatography-mass spectrometry.

In this work, core-shell structure Fe(3)O(4)@C@polyaniline magnetic microspheres were synthesized using simple hydrothermal reactions. The carbon-coated magnetic microspheres (Fe(3)O(4)@C) were first synthesized by a hydrothermal reaction, and then aniline was polymerized on the magnetic core via another hydrothermal reaction. Then, the obtained Fe(3)O(4)@C@polyaniline magnetic microspheres were applied as magnetic adsorbents for the extraction of aromatic molecules due to π-π interactions between polyaniline shell and aromatic compounds. In our study, five kinds of phenols including phenol, 2,4-dichlorophenol (DCP), 2,4,5-trichlorophenol (TCP), pentachlorophenol (PCP) and bisphenol A (BPA) were selected as the model analytes to verify the extraction ability of Fe(3)O(4)@C@PANI microspheres. After derivatization, the phenols were detected using gas chromatography-mass spectrometry (GC-MS). The dominant parameters affecting enrichment efficiency were investigated and optimized. Under the optimal conditions, the proposed method was evaluated, and applied to the analysis of phenols in real water samples. The results demonstrated that our proposed method based on Fe(3)O(4)@C@polyaniline magnetic microspheres had good linearity (r(2)>0.991), and limits of quantification (2.52-29.7 ng/mL), high repeatability (RSD<13.1%) and good recovery (85.3-110.6%).

Integrated strong cation exchange/capillary reversed-phase liquid chromatography/on-target digestion coupled with mass spectrometry for identification of intact human liver tissue proteins.

We present a comprehensive method for proteome analysis that integrates both intact protein separation and proteolytic fragment characterization mass spectrometric approaches. Strong cation exchange chromatography (SCX) was used as the first separation dimension and capillary reversed-phase liquid chromatography (cRPLC) was integrated as the second separation dimension. Fractions from SCX were collected offline and loaded onto cRPLC. Effluents from cRPLC were directly deposited onto the MALDI target plates and further digested by using a rapid on-probe tryptic digestion technique. This approach minimizes the amount of time and extensive labor required for traditional in-solution digestion followed by exhaustive sample cleanup and transfer. MALDI-TOF/TOF was used for subsequent analyses. The sensitivity of on-target digestion is showed by analyzing 0.07 ng of myoglobin, 0.07 ng of cytochrome c and 0.7 ng BSA. The high efficiency of the overall system was demonstrated by the analysis of intact proteins extracted from normal human liver tissue. In total, 458 proteins were identified, which proved the system's promising potential for analysis and application in proteomics.

Large scale depletion of the high-abundance proteins and analysis of middle- and low-abundance proteins in human liver proteome by multidimensional liquid chromatography.

An unbiased method for large-scale depletion of high-abundance proteins and identification of middle- or low-abundance proteins by multidimensional LC (MDLC) was demonstrated in this paper. At the protein level, the MDLC system, coupling the first dimensional strong cation exchange (SCX) chromatography with the second dimensional RP-HPLC, instead of immunoaffinity technology, was used to deplete high-abundance proteins. Sixty-two fractions from SCX were separated further by RPLC. UV absorption spectra were observed to differentiate high-abundance proteins from middle- or low-abundance proteins. After the depletion of high-abundance proteins, middle- or low-abundance proteins were enriched, digested, and separated by online 2D-micro-SCX/cRPLC. The eluted peptides were deposited on the MALDI target and detected by MALDI-TOF/TOF MS. This depletion strategy was applied to the proteome of the normal human liver (NHL) provided by the China Human Liver Proteome Project (CHLPP). In total, 58 high-abundance proteins were depleted in one experiment. The strategy increases greatly the number of identified proteins and around 1213 proteins were identified, which was about 2.7 times as that of the nondepletion method.

Efficient on-chip proteolysis system based on functionalized magnetic silica microspheres.

An easily replaceable enzymatic microreactor has been fabricated based on the glass microchip with trypsin-immobilized magnetic silica microspheres (MS microspheres). Magnetic microspheres with small size (approximately 300 nm in diameter) and high magnetic responsivity to magnetic field (68.2 emu/g) were synthesized and modified with tetraethyl orthosilicate (TEOS). Aminopropyltriethoxysilane (APTES) and glutaraldehyde (GA) were then introduced to functionalize the MS microspheres for enzyme immobilization. Trypsin was stably immobilized onto the MS microspheres through the reaction of primary amines of the proteins with aldehyde groups on the MS microspheres. The trypsin-immobilized MS microspheres were then locally packed into the microchannel by the application of a strong field magnet to form an on-chip enzymatic microreactor. The digestion efficiency and reproducibility of the microreactor were demonstrated by using cytochrome c (Cyt-C) as a model protein. When compared with an incubation time of 12 h by free trypsin in the conventional digestion approach, proteins can be digested by the on-chip microreactor in several minutes. This microreactor was also successfully applied to the analysis of an RPLC fraction of the rat liver extract. This opens a route for its further application in top-down proteomic analysis.

Microchip reactor packed with metal-ion chelated magnetic silica microspheres for highly efficient proteolysis.

An easily replaceable and regenerable protease microreactor with metal-ion chelated adsorption of enzyme has been fabricated on chip. Magnetic microspheres with small size (approximately 200 nm in diameter) and strong magnetism were synthesized and were modified with tetraethyl orthosilicate. The metal chelating agent of iminodiacetic acid was then reacted with glycidoxypropyltrimethoxysilane before its immobilization onto the surface of magnetic silica microspheres (MS microspheres). The metal ion of copper and enzyme were subsequently adsorbed onto the surface. The prepared MS microspheres were then locally packed into the microchannel by the application of a strong magnetic field using a magnet to form an on-chip enzymatic microreactor. Capability of the proteolytic microreactor was demonstrated by cytochrome c and bovine serum albumin as model proteins. The digestion products were characterized using MALDI-TOF/TOF MS with sequence coverage of 77% and 21% observed, respectively. This microreactor was also applied to the analysis of one RPLC fraction of rat liver extract. After a database search, 23 unique peptides corresponding to 7 proteins were identified when one RPLC fraction of rat liver extract was digested by the microreactor. This opens a route for its future application in top-down proteomic analysis.

Highly efficient enrichment and subsequent digestion of proteins in the mesoporous molecular sieve silicate SBA-15 for matrix-assisted laser desorption/ionization mass spectrometry with time-of-flight/time-of-flight analyzer peptide mapping.

Based on a previous study of protein digestion inside the nanoreactor channels of the mesoporous molecular sieve silicate SBA-15 (Chem. Eur. J. 2005, 11: 5391), we have developed a highly efficient enrichment and subsequent tryptic digestion of proteins in SBA-15 for matrix-assisted laser desorption/ionization mass spectrometry with time-of-flight/time-of-flight analyzer (MALDI-TOF/TOF) peptide mapping. The performance of the method is exemplified with myoglobin and cytochrome c. First, protein adsorption isotherms for two standard proteins with a range of initial concentration of proteins were investigated at room temperature. The results revealed that the kinetic adsorption rate of a protein within SBA-15 was independent of initial protein concentration, and a 15-min protein enrichment within SBA-15 could be enough for protein identification in biological samples. It was noticed that no washing steps were needed to avoid protein loss due to desorption from the mesochannels into solution. Second, protein digestion inside the channels of SBA-15 was also optimized. After adsorption of proteins into SBA-15 in 15 min, the trypsin solution (pH 8) was directly added to the SBA-15 beads with immobilized proteins by centrifugation, and then the digestion was performed for 15 min at 37 degrees C. It was observed that a higher peptide sequence covering of 98% for myoglobin was obtained by MALDI-TOF/TOF analysis, compared to in-solution digestion. So the protein digestion inside SBA-15 was proved to be significantly faster and yielded a better sequence coverage. The new procedure allows for rapid protein enrichment and digestion inside SBA-15, and has great potential for protein analysis.

Comprehensive two-dimensional separation in coupling of reversed-phase chromatography with capillary isoelectric focusing followed by MALDI-MS identification using on-target digestion for intact protein analysis.

A coupling of capillary RP LC as the first dimension with CIEF as the second dimension followed by MALDI-MS identification was demonstrated. Based on 2-D separation system developed by our group (Electrophoresis 2003, 24, 3289-3295), this paper focused on incorporating tryptic digestion into the top-down proteomics methodology, retaining the benefits of the top-down method. Hydrophobic layer of packing-material C18 coated with SE-30 on the MALDI-target surface was used to permit the CIEF fractions to be easily concentrated and free of ampholytes using on-target washing. Following the removal of ampholytes, on-target tryptic digestion was performed to generate PMF for protein identification. Using the proteome analytical strategy, we could obtain not only intact protein pI value but also PMF for accurate protein identification. The feasibility of the strategy was first tested with a mixture of model proteins with different pIs and molecular masses. Proteome of rat liver tissue extracts was further analyzed using the system for verification. The results have shown that the system is effective for complex proteomic analysis.