Mechanical and Structural Properties of Articular Cartilage and Subchondral Bone in Human Osteoarthritic Knees.

Knee osteoarthritis (OA), characterized by multiple joint tissue degenerations, remains a significant clinical challenge. Recent evidence suggests that crosstalk within the osteochondral unit may drive OA progression. While structural-biomechanical properties of bone and cartilage have been studied, potential interaction within the osteochondral unit in the context of OA has yet to be investigated. We performed comprehensive structural and biomechanical quantification of the cartilage, subchondral bone plate, and subchondral trabecular bone using 101 osteochondral cores collected from tibial plateaus of 12 control human cadavers (CT, 5 male/7 female) and 19 patients undergoing total knee replacement (OA, 6 male/13 female). For each sample, we quantified subchondral bone plate microstructure, plate-and-rod morphological properties of the subchondral trabecular bone using individual trabecula segmentation, and morphological and compositional properties of the articular cartilage. We also performed indentation testing on each compartment of the osteochondral unit to extract the respective structural-mechanical properties. Cartilage thickness was lower in moderate and severe OA regions, while OARSI score was higher only in severe OA regions. GAG content did not change in any OA region. Aggregate and shear moduli were lower only in severe OA regions, while permeability was lower only in moderate OA regions. In the subchondral bone plate, thickness and TMD were higher in moderate and severe OA regions. Tissue modulus of subchondral trabecular bone was lower in moderate OA regions despite a thicker and more mineralized subchondral bone plate; this deterioration was not observed in severe OA regions. Regression analysis revealed strong correlations between cartilage and subchondral trabecular bone properties in CT; these correlations were also found in moderate OA regions but were not observed in severe OA regions. In summary, our findings comprehensively characterize the human OA osteochondral unit. Importantly, uncoupling cartilage and subchondral bone structural-mechanical properties may be a hallmark of OA.

Knee osteoarthritis (OA) is a complex condition involving the degradation of joint tissues. To better understand OA progression, we investigated the interplay between different components of the joint. Our study focused on how cartilage, subchondral bone plate, and subchondral trabecular bone interact in human knee OA samples. We observed distinct changes in these tissues in moderate and severe OA regions compared to healthy joints. In moderate to severe OA, we found that cartilage thickness decreased while the subchondral bone plate thickened. Interestingly, the strength of the subchondral trabecular bone decreased only in moderate OA regions, not in severe OA. Moreover, our analysis revealed strong correlations between cartilage and subchondral trabecular bone properties in healthy joints and moderate OA regions. However, these correlations were absent in severe OA regions, indicating a disruption in the usual relationship between these tissues. Overall, our findings shed light on the structural and biomechanical changes occurring within the knee joint in OA. Understanding these changes may offer insights into potential therapeutic strategies for managing OA.

Microstructure Determines Apparent-Level Mechanics Despite Tissue-Level Anisotropy and Heterogeneity of Individual Plates and Rods in Normal Human Trabecular Bone.

Trabecular plates and rods determine apparent elastic modulus and yield strength of trabecular bone, serving as important indicators of bone's mechanical integrity in health and disease. Although trabecular bone's apparent-level mechanical properties have been widely reported, tissue mechanical properties of individual trabeculae have not been fully characterized. We systematically measured tissue mineral density (TMD)-dependent elastic modulus of individual trabeculae using microindentation and characterized its anisotropy as a function of trabecular type (plate or rod), trabecular orientation in the global coordinate (longitudinal, oblique, or transverse along the anatomic loading axis), and indentation direction along the local trabecular coordinate (axial or lateral). Human trabecular bone samples were scanned by micro-computed tomography for TMD and microstructural measurements. Individual trabecula segmentation was used to decompose trabecular network into individual trabeculae, where trabecular type and orientation were determined. We performed precise, selective indentation of trabeculae in each category using a custom-built, microscope-coupled microindentation device. Co-localization of TMD at each indentation site was performed to obtain TMD-to-modulus correlations. We found significantly higher TMD and tissue modulus in trabecular plates than rods. Regardless of trabecular type and orientation, axial tissue modulus was consistently higher than lateral tissue modulus, with ratios ranging from 1.13 to 1.41. Correlations between TMD and tissue modulus measured from axial and lateral indentations were strong but distinct: axial correlation predicted higher tissue modulus than lateral correlation at the same TMD level. To assess the contribution of experimentally measured anisotropic tissue properties of individual trabeculae to apparent-level mechanics, we constructed non-linear micro-finite element models using a new set of trabecular bone samples and compared model predictions to mechanical testing measurements. Heterogeneous anisotropic models accurately predicted apparent elastic modulus but were no better than a simple homogeneous isotropic model. Variances in tissue-level properties may therefore contribute nominally to apparent-level mechanics in normal human trabecular bone. © 2021 American Society for Bone and Mineral Research (ASBMR).

Regional Variations of HR-pQCT Morphological and Biomechanical Measurements of Bone Segments and Their Associations With Whole Distal Radius and Tibia Mechanical Properties.

High-resolution peripheral quantitative computed tomography (HR-pQCT) is a promising imaging modality that provides an in vivo three-dimensional (3D) assessment of bone microstructure by scanning fixed regions of the distal radius and tibia. However, how microstructural parameters and mechanical analysis based on these segment scans correlate to whole distal radius and tibia mechanics are not well-characterized. On 26 sets of cadaveric radius and tibia, HR-pQCT scans were performed on the standard scan segment, a segment distal to the standard segment, and a segment proximal to the standard segment. Whole distal radius and tibia stiffness were determined through mechanical testing. Segment bone stiffness was estimated using linear finite element (FE) analysis based on segment scans. Standard morphological and individual trabecula segmentation (ITS) analyses were used to estimate microstructural properties. Significant variations in microstructural parameters were observed among segments at both sites. Correlation to whole distal radius and tibia stiffness was moderate for microstructural parameters at the standard segment, but correlation was significantly increased for FE-predicted segment bone stiffness based on standard segment scans. Similar correlation strengths were found between FE-predicted segment bone stiffness and whole distal radius and tibia stiffness. Additionally, microstructural parameters at the distal segment had higher correlation to whole distal radius and tibia stiffness than at standard or proximal segments. Our results suggest that FE-predicted segment stiffness is a better predictor of whole distal radius and tibia stiffness for clinical HR-pQCT analysis and that microstructural parameters at the distal segment are more highly correlated with whole distal radius and tibia stiffness than at the standard or proximal segments.

Subchondral Trabecular Rod Loss and Plate Thickening in the Development of Osteoarthritis.

Developing effective treatment for osteoarthritis (OA), a prevalent and disabling disease, has remained a challenge, primarily because of limited understanding of its pathogenesis and late diagnosis. In the subchondral bone, rapid bone loss after traumatic injuries and bone sclerosis at the advanced stage of OA are well-recognized hallmarks of the disease. Recent studies have further demonstrated the crucial contribution of subchondral bone in the development of OA. However, the microstructural basis of these bone changes has not been examined thoroughly, and the paradox of how abnormal resorption can eventually lead to bone sclerosis remains unanswered. By applying a novel microstructural analysis technique, individual trabecula segmentation (ITS), to micro-computed tomography (µCT) images of human OA knees, we have identified a drastic loss of rod-like trabeculae and thickening of plate-like trabeculae that persisted in all regions of the tibial plateau, underneath both severely damaged and still intact cartilage. The simultaneous reduction in trabecular rods and thickening of trabecular plates provide important insights to the dynamic and paradoxical subchondral bone changes observed in OA. Furthermore, using an established guinea pig model of spontaneous OA, we discovered similar trabecular rod loss and plate thickening that preceded cartilage degradation. Thus, our study suggests that rod-and-plate microstructural changes in the subchondral trabecular bone may play an important role in the development of OA and that advanced microstructural analysis techniques such as ITS are necessary in detecting these early but subtle changes. With emerging high-resolution skeletal imaging modalities such as the high-resolution peripheral quantitative computed tomography (HR-pQCT), trabecular rod loss identified by ITS could potentially be used as a marker in assessing the progression of OA in future longitudinal studies or clinical diagnosis. © 2017 American Society for Bone and Mineral Research.

Unique local bone tissue characteristics in iliac crest bone biopsy from adolescent idiopathic scoliosis with severe spinal deformity.

Adolescent idiopathic scoliosis is a complex disease with unclear etiopathogenesis. Systemic and persistent low bone mineral density is an independent prognostic factor for curve progression. The fundamental question of how bone quality is affected in AIS remains controversy because there is lack of site-matched control for detailed analysis on bone-related parameters. In this case-control study, trabecular bone biopsies from iliac crest were collected intra-operatively from 28 severe AIS patients and 10 matched controls with similar skeletal and sexual maturity, anthropometry and femoral neck BMD Z-score to control confounding effects. In addition to static histomorphometry, micro-computed tomography (µCT) and real time-PCR (qPCR) analyses, individual trabecula segmentation (ITS)-based analysis, finite element analysis (FEA), energy dispersive X-ray spectroscopy (EDX) were conducted to provide advanced analysis of structural, mechanical and mineralization features. µCT and histomorphometry showed consistently reduced trabecular number and connectivity. ITS revealed predominant change in trabecular rods, and EDX confirmed less mineralization. The structural and mineralization abnormality led to slight reduction in apparent modulus, which could be attributed to differential down-regulation of Runx2, and up-regulation of Spp1 and TRAP. In conclusion, this is the first comprehensive study providing direct evidence of undefined unique pathological changes at different bone hierarchical levels in AIS.

In Vivo Precision of Digital Topological Skeletonization Based Individual Trabecula Segmentation (ITS) Analysis of Trabecular Microstructure at the Distal Radius and Tibia by HR-pQCT.

Trabecular plate and rod microstructure plays a dominant role in the apparent mechanical properties of trabecular bone. With high-resolution computed tomography (CT) images, digital topological analysis (DTA) including skeletonization and topological classification was applied to transform the trabecular three-dimensional (3D) network into surface and curve skeletons. Using the DTA-based topological analysis and a new reconstruction/recovery scheme, individual trabecula segmentation (ITS) was developed to segment individual trabecular plates and rods and quantify the trabecular plate- and rod-related morphological parameters. High-resolution peripheral quantitative computed tomography (HR-pQCT) is an emerging in vivo imaging technique to visualize 3D bone microstructure. Based on HR-pQCT images, ITS was applied to various HR-pQCT datasets to examine trabecular plate- and rod-related microstructure and has demonstrated great potential in cross-sectional and longitudinal clinical applications. However, the reproducibility of ITS has not been fully determined. The aim of the current study is to quantify the precision errors of ITS plate-rod microstructural parameters. In addition, we utilized three different frequently used contour techniques to separate trabecular and cortical bone and to evaluate their effect on ITS measurements. Overall, good reproducibility was found for the standard HR-pQCT parameters with precision errors for volumetric BMD and bone size between 0.2%-2.0%, and trabecular bone microstructure between 4.9%-6.7% at the radius and tibia. High reproducibility was also achieved for ITS measurements using all three different contour techniques. For example, using automatic contour technology, low precision errors were found for plate and rod trabecular number (pTb.N, rTb.N, 0.9% and 3.6%), plate and rod trabecular thickness (pTb.Th, rTb.Th, 0.6% and 1.7%), plate trabecular surface (pTb.S, 3.4%), rod trabecular length (rTb.ℓ, 0.8%), and plate-plate junction density (P-P Junc.D, 2.3%) at the tibia. The precision errors at the radius were similar to those at the tibia. In addition, precision errors were affected by the contour technique. At the tibia, precision error by the manual contour method was significantly different from automatic and standard contour methods for pTb.N, rTb.N and rTb.Th. Precision error using the manual contour method was also significantly different from the standard contour method for rod trabecular number (rTb.N), rod trabecular thickness (rTb.Th), rod-rod and plate-rod junction densities (R-R Junc.D and P-R Junc.D) at the tibia. At the radius, the precision error was similar between the three different contour methods. Image quality was also found to significantly affect the ITS reproducibility. We concluded that ITS parameters are highly reproducible, giving assurance that future cross-sectional and longitudinal clinical HR-pQCT studies are feasible in the context of limited sample sizes.

Deterioration of trabecular plate-rod and cortical microarchitecture and reduced bone stiffness at distal radius and tibia in postmenopausal women with vertebral fractures.

Postmenopausal women with vertebral fractures have abnormal bone microarchitecture at the distal radius and tibia by HR-pQCT, independent of areal BMD. However, whether trabecular plate and rod microarchitecture is altered in women with vertebral fractures is unknown. This study aims to characterize the abnormalities of trabecular plate and rod microarchitecture, cortex, and bone stiffness in postmenopausal women with vertebral fractures. HR-pQCT images of distal radius and tibia were acquired from 45 women with vertebral fractures and 45 control subjects without fractures. Trabecular and cortical compartments were separated by an automatic segmentation algorithm and subjected to individual trabecula segmentation (ITS) analysis for measuring trabecular plate and rod morphology and cortical bone evaluation for measuring cortical thickness and porosity, respectively. Whole bone and trabecular bone stiffness were estimated by finite element analysis. Fracture and control subjects did not differ according to age, race, body mass index, osteoporosis risk factors, or medication use. Women with vertebral fractures had thinner cortices, and larger trabecular area compared to the control group. By ITS analysis, fracture subjects had fewer trabecular plates, less axially aligned trabeculae and less trabecular connectivity at both the radius and the tibia. Fewer trabecular rods were observed at the radius. Whole bone stiffness and trabecular bone stiffness were 18% and 22% lower in women with vertebral fractures at the radius, and 19% and 16% lower at the tibia, compared with controls. The estimated failure load of the radius and tibia were also reduced in the fracture subjects by 13% and 14%, respectively. In summary, postmenopausal women with vertebral fractures had both trabecular and cortical microstructural deterioration at the peripheral skeleton, with a preferential loss of trabecular plates and cortical thinning. These microstructural deficits translated into lower whole bone and trabecular bone stiffness at the radius and tibia. Our results suggest that abnormalities in trabecular plate and rod microstructure may be important mechanisms of vertebral fracture in postmenopausal women.

High-resolution peripheral quantitative computed tomography (HR-pQCT) can assess microstructural and biomechanical properties of both human distal radius and tibia: Ex vivo computational and experimental validations.

High-resolution peripheral quantitative computed tomography (HR-pQCT) provides in vivo three-dimensional (3D) imaging at the distal radius and tibia and has been increasingly used to characterize cortical and trabecular bone morphology in clinical studies. In this study, we comprehensively examined the accuracy of HR-pQCT and HR-pQCT based micro finite element (µFE) analysis predicted bone elastic stiffness and strength through comparisons with gold-standard micro computed tomography (µCT) based morphological/µFE measures and direct mechanical testing results. Twenty-six sets of human cadaveric distal radius and tibia segments were imaged by HR-pQCT and µCT. Microstructural analyses were performed for the registered HR-pQCT and µCT images. Bone stiffness and yield strength were determined by both HR-pQCT and µCT based linear and nonlinear µFE predictions and mechanical testing. Our results suggested that strong and significant correlations existed between the HR-pQCT standard, model-independent and corresponding µCT measurements. HR-pQCT based nonlinear µFE overestimated stiffness and yield strength while the linear µFE underestimated yield strength, but both were strongly correlated with those predicted by µCT µFE and measured by mechanical testing at both radius and tibia (R(2)>0.9). The microstructural differences between HR-pQCT and µCT were also examined by the Bland-Altman plots. Our results showed HR-pQCT morphological measurements of BV/TV(d), Tb.Th, and Tb.Sp, can be adjusted by correction values to approach true values measured by gold-standard µCT. In addition, we observed moderate correlations of HR-pQCT biomechanical and microstructural parameters between the distal radius and tibia. We concluded that morphological and mechanical properties of human radius and tibia bone can be assessed by HR-pQCT based measures.