In Situ Constructing a Catalytic Shell for Sulfur Cathode via Electrochemical Oxidative Polymerization.

Sluggish multiphase reaction kinetics and severe shuttle effect of lithium polysulfides (LiPSs) are two major challenges facing lithium-sulfur (Li-S) batteries, which largely prevent them from becoming a reality. Herein, a shell with catalytic function for sulfur cathode is in situ constructed through an ingenious electrochemical oxidative polymerization strategy by introducing hexafluorocyclotriphosphazene (HFPN) as additives, which suppresses the shuttle effect and promotes efficient sulfur conversion. The shell with abundant heteroatoms effectively confines polysulfides to the cathode matrix by chemically interacting with them to eliminate capacity degradation. Moreover, the shell exhibits high catalytic activities, which turns Li2S(2) into an activated state and facilitates its dissociation. The functionalized shell substantially advances the performance of Li-S batteries, thanks to efficient lithium-ion transportation and abundant adsorption-catalytic sites. As a result, Li-S batteries demonstrate superb resistance to self-discharge, ultrastable cycle performance, and greatly enhanced rate capability. Impressively, the batteries show an ultralow capacity decay rate of 0.034% throughout 700 cycles at 2C. They deliver a capacity of 517 mAh g-1 even at a 4C rate, exhibiting relieved electrochemical polarization and excellent sulfur utilization. This work provides an ingenious strategy to construct adsorption-catalytic nets for next-generation Li-S batteries with enhanced lifespan and electrochemical performance.

Single-dispersed polyoxometalate clusters embedded on multilayer graphene as a bifunctional electrocatalyst for efficient Li-S batteries.

The redox reactions occurring in the Li-S battery positive electrode conceal various and critical electrocatalytic processes, which strongly influence the performances of this electrochemical energy storage system. Here, we report the development of a single-dispersed molecular cluster catalyst composite comprising of a polyoxometalate framework ([Co4(PW9O34)2]10-) and multilayer reduced graphene oxide. Due to the interfacial charge transfer and exposure of unsaturated cobalt sites, the composite demonstrates efficient polysulfides adsorption and reduced activation energy for polysulfides conversion, thus serving as a bifunctional electrocatalyst. When tested in full Li-S coin cell configuration, the composite allows for a long-term Li-S battery cycling with a capacity fading of 0.015% per cycle after 1000 cycles at 2 C (i.e., 3.36 A g-1). An areal capacity of 4.55 mAh cm-2 is also achieved with a sulfur loading of 5.6 mg cm-2 and E/S ratio of 4.5 µL mg-1. Moreover, Li-S single-electrode pouch cells tested with the bifunctional electrocatalyst demonstrate a specific capacity of about 800 mAh g-1 at a sulfur loading of 3.6 mg cm-2 for 100 cycles at 0.2 C (i.e., 336 mA g-1) with E/S ratio of 5 µL mg-1.

The Intrinsic Charge Carrier Behaviors and Applications of Polyoxometalate Clusters Based Materials.

Polyoxometalates (POMs) are a series of molecular metal oxide clusters, which span the two domains of solutes and solid metal oxides. The unique characters of POMs in structure, geometry, and adjustable redox properties have attracted widespread attention in functional material synthesis, catalysis, electronic devices, and electrochemical energy storage and conversion. This review is focused on the links between the intrinsic charge carrier behaviors of POMs from a chemistry-oriented view and their recent ground-breaking developments in related areas. First, the advantageous charge transfer behaviors of POMs in molecular-level electronic devices are summarized. Solar-driven, thermal-driven, and electrochemical-driven charge carrier behaviors of POMs in energy generation, conversion and storage systems are also discussed. Finally, present challenges and fundamental insights are discussed as to the advanced design of functional systems based upon POM building blocks for their possible emerging application areas.

Tuning Redox Active Polyoxometalates for Efficient Electron-Coupled Proton-Buffer-Mediated Water Splitting.

We present strategies to tune the redox properties of polyoxometalate clusters to enhance the electron-coupled proton-buffer-mediated water splitting process, in which the evolution of hydrogen and oxygen can occur in different forms and is separated in time and space. By substituting the heteroatom template in the Keggin-type polyoxometalate cluster, H6 ZnW12 O40 , it is possible to double the number of electrons and protonation in the redox reactions (from two to four). This increase can be achieved with better matching of the energy levels as indicated by the redox potentials, compared to the ones of well-studied H3 PW12 O40 and H4 SiW12 O40 . This means that H6 ZnW12 O40 can act as a high-performance redox mediator in an electrolytic cell for the on-demand generation of hydrogen with a high decoupling efficiency of 95.5 % and an electrochemical energy efficiency of 83.3 %. Furthermore, the H6 ZnW12 O40 cluster also exhibits an excellent cycling behaviour and redox reversibility with almost 100 % H2 -mediated capacity retention during 200 cycles and a high coulombic efficiency >92 % each cycle at 30 mA cm-2 .

Strategies to Explore and Develop Reversible Redox Reactions of Li-S in Electrode Architectures Using Silver-Polyoxometalate Clusters.

Investigations of the Ag (I)-substituted Keggin K3[H3AgIPW11O39] as a bifunctional Lewis acidic and basic catalyst are reported that explore the stabilization of Li2Sn moieties so that reversible redox reactions in S-based electrodes would be possible. Spectroscopic investigations showed that the Li2Sn-moieties can be strongly adsorbed on the {AgIPW11O39} cluster, where the Ag(I) ion can act as a Lewis acid site to further enhance the adsorption of the S-moieties, and these interactions were investigated and rationalized using DFT. These results were used to construct an electrode for use in a Li-S battery with a very high S utilization of 94%, and a coulometric capacity of 1580 mAh g-1. This means, as a result of using the AgPOM, both a high active S content, as well as a high areal S mass loading, is achieved in the composite electrode giving a highly stable battery with cycling performance at high rates (1050 and 810 mAh g-1 at 1C and 2C over 100 to 300 cycles, respectively).

Brønsted-NH(4)(+) mechanism versus nitrite mechanism: new insight into the selective catalytic reduction of NO by NH(3).

The selective catalytic reduction (SCR) of NO by NH(3) over V(2)O(5)-based catalysts is used worldwide to control NO(x) emission. Understanding the mechanisms involved is vital for the rational design of more effective catalysts. Here, we have performed a systematic density functional theory (DFT) study of a SCR reaction by using cluster models. Three possible mechanisms have been considered, namely (i) a Lewis acid mechanism, (ii) a Brønsted acid mechanism and (iii) a nitrite mechanism. Our calculations down-play the significance of mechanism (i) due to its high barrier as well as the incorrect reaction order. On the other hand, our calculations demonstrate that both mechanisms (ii) and (iii) can lead to a first order reaction with respect to NO with the predicted barriers being consistent with the experimental observations. Thus, we conclude: there exists two competitive pathways for SCR. Mechanism (ii) is dominant when the Brønsted acidity of the catalysts is relatively strong, while mechanism (iii) becomes important when Brønsted acidity is weak or absent. Importantly, we demonstrate that the latter two mechanisms share a common feature where N-N bond formation is ahead of N-H bond cleavage, in contrast to that in mechanism (i). Such a sequence provides an effective way to reduce the side reaction of ammonia combustion since the relatively strong N-N bond has already been formed.