RESUMO
Copper-based catalysts are widely explored in electrochemical CO2 reduction (CO2RR) because of their ability to convert CO2 into high-value-added multicarbon products. However, the poor stability and low selectivity limit the practical applications of these catalysts. Here, we proposed a simple and efficient asymmetric low-frequency pulsed strategy (ALPS) to significantly enhance the stability and the selectivity of the Cu-dimethylpyrazole complex Cu3(DMPz)3 catalyst in CO2RR. Under traditional potentiostatic conditions, Cu3(DMPz)3 exhibited poor CO2RR performance with the Faradaic efficiency (FE) of 34.5% for C2H4 and FE of 5.9% for CH4 as well as the low stability for less than 1 h. We optimized two distinguished ALPS methods toward CH4 and C2H4, correspondingly. The high selectivities of catalytic product CH4 (FECH4 = 80.3% and above 76.6% within 24 h) and C2H4 (FEC2H4 = 70.7% and above 66.8% within 24 h) can be obtained, respectively. The ultralong stability for 300 h (FECH4 > 60%) and 145 h (FEC2H4 > 50%) was also recorded with the ALPS method. Microscopy (HRTEM, SAED, and HAADF) measurements revealed that the ALPS method in situ generated and stabilized extremely dispersive and active Cu-based clusters (â¼2.7 nm) from Cu3(DMPz)3. Meanwhile, ex situ spectroscopies (XPS, AES, and XANES) and in situ XANES indicated that this ALPS method modulated the Cu oxidation states, such as Cu(0 and I) with C2H4 selectivity and Cu(I and II) with CH4 selectivity. The mechanism under the ALPS methods was explored by in situ ATR-FTIR, in situ Raman, and DFT computation. The ALPS methods provide a new opportunity to boost the selectivity and stability of CO2RR.
RESUMO
It is urgent to find a catalyst with high selectivity and efficiency for the reduction of CO2 by renewable electric energy, which is the important means to reduce the greenhouse effect. In this work, we report that the metal-organic framework (MOF) indium-based 1,4-benzenedicarboxylate (In-BDC) catalyzes CO2 to formate with a Faradaic efficiency (FEHCOO-) of more than 80% in a wide voltage range between -0.419 and -0.769 V (vs. reversible hydrogen electrode, RHE). In-BDC performs at a maximum FEHCOO- of 88% at -0.669 V (vs. RHE) and a turnover frequency of up to 4798 h-1 at -1.069 V (vs. RHE). The long-term durability of 21 h and reusability of the electrocatalyst are clearly demonstrated. It opens up a new opportunity to utilize MOF with novel metal motifs for the efficient electroreduction of CO2.
RESUMO
Ultrathin 2D nickel(II) (Ni2+) and imidazole (Im) based zeolitic imidazolate framework Ni(Im)2 nanosheets are reported as exceptional efficient electrocatalysts for the electrocatalytic CO2 reduction reaction. Five nanometre thick nanosheets have a higher faradaic efficiency of 78.8% and a surface active site density of 1.68 × 10-7 mol cm-2, which is superior to those of thicker nanosheets and bulk Ni(Im)2.
