Surface Chemistry Modulation of BaGd0.8La0.2Co2O6-δ As Active Air Electrode for Solid Oxide Cells.

Modulation of the surface chemistry of air electrodes makes it possible to significantly improve the electrocatalytic performance of solid oxide cells (SOCs). Here, the surface chemistry of BaGd0.8La0.2Co2O6-δ (BGLC) double perovskite is modulated by treatment in an acidic citric acid solution. The treatment leads to corrosion on the surface of BGLC particles, and the effect is dependent on the acidity of the solution. As the acidity of solution is low, Ba cations are selectively dissolved out of the BGLC surface, while as the acidity increases, the corrosion becomes more homogeneous. The Ba surface deficiency remarkably increases the concentration of surface oxygen vacancies and electrocatalytic activity of BGLC. To avoid the loss of Ba-deficient surface during the conventional high temperature sintering process, a sintering-free fabrication route is utilized to directly assemble the Ba-deficient BGLC powder into an air electrode. A single cell with the surface Ba-deficient BGLC electrode shows a peak power density of 1.04 W cm-2 at 750 °C and an electrolysis current density of 1.48 A cm-2 at 1.3 V, much greater than 0.64 W cm-2 and 1.02 A cm-2 of the cell with the pristine BGLC, respectively. This work provides a simple and effective surface chemistry modulation strategy for the development of an efficient air electrode for SOCs.

Electrochemically Assisted Construction of a La2NiO4+δ@Pt Core-Shell Structure for Enhancing the Performance and Durability of La2NiO4+δ Cathodes.

Ruddlesden-Popper oxide La2NiO4+δ (LNO) has a high ionic conductivity and good thermal match with the electrolyte of solid oxide fuel cells (SOFCs); however, LNO suffers from performance decay owing to the La surface segregation under the operation conditions of SOFCs. Herein, we report an in situ electrochemical decoration strategy to improve the electrocatalytic activity and durability of LNO cathodes. We show that the electrochemical polarization leads to in situ construction of the LNO@Pt core-shell structure, significantly suppressing the detrimental effect of La surface segregation on the LNO cathode. The initial peak power density of a single cell with the LNO cathode is 0.71 W cm-2 at 750 °C, increasing to 1.39 W cm-2 by the in situ construction of the LNO@Pt core-shell structure after polarization at 0.5 A cm-2 for 20 h. The LNO@Pt core-shell structure is also highly durable without noticeable performance degradation over the duration of the test for 180 h. The findings shed light on the design and fabrication of highly active and durable LNO-based cathodes for SOFCs.

Facile Construction of Nanostructured Cermet Anodes with Strong Metal-Oxide Interaction for Efficient and Durable Solid Oxide Fuel Cells.

Nanostructured anodes generate massive reaction sites to oxidize fuels in solid oxide fuel cells (SOFCs); however, the nonexistence of a practically viable approach for the construction of nanostructures and the retention of these nanostructures under the harsh operating conditions of SOFCs poses a significant challenge. Herein, a simple procedure is reported for the construction of a nanostructured Ni-Gd-doped CeO2 anode based on the direct assembly of pre-formed nanocomposite powder with strong metal-oxide interaction. The directly assembled anode forms heterointerfaces with the electrolyte owing to the electrochemical polarization current and exhibits excellent structural robustness against thermal ripening. An electrolyte-supported cell with the directly assembled anode produces a peak power density of 0.73 W cm-2 at 800 °C, while maintaining stability for 100 h, which is in contrast to the drastic degradation of the cermet anode prepared using the conventional method. These findings provide clarity on the design and construction of durable nanostructured anodes and other electrodes for SOFCs.

Facile Approach for Improving the Interfacial Adhesion of Nanofiber Air Electrodes of Reversible Solid Oxide Cells.

Nanofibers have great promise as a highly active air electrode for reversible solid oxide cells (ReSOCs); however, one thorny issue is how to adhesively stick nanofibers to electrolyte with no damage to the original morphology. Herein, PrBa0.8Ca0.2Co2O5+δ (PBCC) nanofibers are applied as an air electrode by a facile direct assembly approach that leads to the retention of most of the unique microstructure of nanofibers, and firm adhesion of the nanofiber electrode onto the electrolyte is achieved by applying electrochemical polarization. A single cell with the PBCC nanofiber air electrode exhibits excellent maximum power density (1.97 W cm-2), electrolysis performance (1.3 A cm-2 at 1.3 V), and operating stability at 750 °C for 200 h. These findings provide a facile means for the utilization of nanofiber electrodes for high-performance and durable ReSOCs.

Ultrafine, Dual-Phase, Cation-Deficient PrBa0.8Ca0.2Co2O5+δ Air Electrode for Efficient Solid Oxide Cells.

Nanostructured air electrodes play a crucial role in improving the electrocatalytic activity of oxygen reduction and evolution reactions in solid oxide cells (SOCs). Herein, we report the fabrication of a nanostructured BaCoO3-decorated cation-deficient PrBa0.8Ca0.2Co2O5+δ (PBCC) air electrode via a combined modification and direct assembly approach. The modification approach endows the dual-phase air electrode with a large surface area and abundant oxygen vacancies. An intimate air electrode-electrolyte interface is in situ constructed with the formation of a catalytically active Co3O4 bridging layer via electrochemical polarization. The corresponding single cell exhibits a peak power density of 2.08 W cm-2, an electrolysis current density of 1.36 A cm-2 at 1.3 V, and a good operating stability at 750 °C for 100 h. This study provides insights into the rational design and facile utilization of an active and stable nanostructured air electrode of SOCs.

Resistive Switching and the Local Electric Field in Bi0.85-xPr0.15RExFe0.97Mn0.03O3/CuFe2O4 (RE = Sr, Dy) Bilayered Thin Films.

Bilayer Bi0.85-xPr0.15RExFe0.97Mn0.03O3/CuFe2O4 (BPRExFMO/CuFO, RE = Sr, Dy) thin films were prepared on FTO/glass substrates by the chemical solution deposition method. The structure transition does not appear after ion doping, which is confirmed by XRD and its refined results. The samples remain in the trigonal R3c:H structure in the BFO phase and in the tetragonal I41/amd structure in the CuFO phase. The asymmetric character of leakage current density curves and resistive switching effects have been explored. And the ion substitution impacts on the resistive switching effects may be due to the existence of local fields. Under the applied electric field, carries are accumulated and arranged directionally at the interface between the BFO and CuFO layers to form the local electric field. Such local field is affected by ion dopants, and the field compensates or weakens the applied electrical field. The reinforced or weakened resistive behavior is dependent on the direction of the local field and the injection of electrons. The polarization switching currents of the BPFMO/CuFO, BPSFMO/CuFO, and BPDFMO/CuFO samples, whose distribution fields are proportional to the local electrical fields, are 0.0070, 0.0049, and 0.0074 A under the positive applied field, respectively. And the remanent polarization is increased to 74.4, 73.5, and 84.3 µC/cm2 of the doped samples, respectively.