Characteristics of Microcellular Foamed Ceramic Urethane.

Ceramics are non-metallic inorganic materials fabricated from natural or high-purity raw materials through heating and cooling processes. Urethane is a three-dimensional plastic with both elasticity and chemical resistance; moreover, it is used as a rubber substitute. The use of both materials in various applications is gradually increasing. However, as ceramics and urethane have distinctly different properties, this prompted questions regarding the properties of a material that is fabricated using both materials. Therefore, we studied the characteristics of a composite material fabricated through physical foaming using a batch process. The process was conducted with gas saturation, foaming, cooling, and curing. When a specimen of 2 mm thickness was saturated in 5 MPa of CO2 for 2 h, the solubility was 6.43%; when foaming was carried out at a temperature of 150 °C in boiled glycerin, the foaming ratio, cell size, cell density, and void fraction were found to be 43.62%, 24.40 µm, 9.1 × 107 cells/cm2, and 22.11%, respectively. Furthermore, the volume increased by 102.96%, color changed from dark to light gray, hardness decreased by 24%, thermal diffusivity increased by 0.046 mm2/s at 175 °C, and friction coefficient decreased to 0.203. Thus, the microcellular foamed ceramic urethane exhibits a larger volume, lighter weight, and improved thermal conductivity and friction coefficient.

Shrinkage and Warpage Minimization of Glass-Fiber-Reinforced Polyamide 6 Parts by Microcellular Foam Injection Molding.

Shrinkage and warpage of injection-molded parts can be minimized by applying microcellular foaming technology to the injection molding process. However, unlike the conventional injection molding process, the optimal conditions of the microcellular foam injection molding process are elusive because of core differences such as gas injection. Therefore, this study aims to derive process conditions to minimize the shrinkage and warpage of microcellular foam injection-molded parts made of glass fiber reinforced polyamide 6 (PA6/GF). Process factors and levels were first determined, with experiments planned accordingly. We simulated designed experiments using injection molding analysis software, and the results were analyzed using the Taguchi method, analysis of variance (ANOVA), and response surface methodology (RSM), with the ANOVA analysis being ultimately demonstrating the influence of the factors. We derived and verified the optimal combination of process factors and levels for minimizing both shrinkage and warpage using the Taguchi method and RSM. In addition, the mechanical properties and cell morphology of PA6/GF, which change with microcellular foam injection molding, were confirmed.

Shape-Memory-Recovery Characteristics of Microcellular Foamed Thermoplastic Polyurethane.

We investigated the shape-recovery characteristics of thermoplastic polyurethane (TPU) with a microcellular foaming process (MCP). Additionally, we investigated the correlation between changes in the microstructure and the shape-recovery characteristics of the polymers. TPU was selected as the base material, and the shape-recovery characteristics were confirmed using a universal testing machine, by manufacturing dog-bone-type injection-molded specimens. TPUs are reticular polymers with both soft and hard segments. In this study, we investigated the shape-memory mechanism of foamed polymers by maximizing the shape-memory properties of these polymers through a physical foaming process. Toward this end, TPU specimens were prepared by varying the gas pressure, foaming temperature, and type of foaming gas in the batch MCP. The effects of internal structural changes were investigated. These experimental variables affected the microstructure and shape-recovery characteristics of the foamed polymer. The generated cell density changed, which affected the shape-recovery characteristics. In general, a higher cell density corresponded to a higher shape-recovery ratio.