A Study on H2SO4-Treated MxOy Catalysts for Styrenated Phenols by Alkylation of Phenol with Styrene.

Styrenated phenols (SPs) involving very small amount of unreacted phenol and high content of di-SP (DSP) were synthesized, which can be used to prepare SP alkoxylate. The solid catalyst was prepared by impregnation method. SO2-4 on SO2-4/MxOy catalyst was introduced from an aqueous 1M-H2SO4 solution. The catalysts were characterized by XRD patterns, and FT-IR spectra. The catalytic activity was examined by measuring conversion of phenol and styrene in a batch liquid-phase reactor. The concentration of phenol, styrene, and SPs were measured by GC with capillary column. The optimum synthesis conditions for concentration of sulfuric acid solution, catalyst amount of reactants, reaction temperature, and reaction time over SO2-4/ZrO2 catalyst were 15 wt%, 15 wt%, 100 °C, and 6 hr, respectively. At these conditions, conversion of both phenol and styrene were almost 100%, and the selectivity of DSP was 52.1%. On the other hand, the optimum synthesis conditions over SO2-4/TiO2 catalyst were 10 wt%, 5 wt%, 100 °C, and 1 hr, respectively, and conversion of both phenol and styrene were almost 100%, and the selectivity of DSP was 66.1%.

Preparation of Styrenated Phenol by Alkylation of Phenol with Styrene Over SO4²â» /ZrO2 Catalyst.

Styrenated phenols are usually synthesized by the reaction of styrene and phenol under acid catalysts. Styrenated phenol involving high content of di-styrenated phenol (DSP) was synthesized, which can be used to prepare styrenated phenol alkoxylate. The solid catalyst used in this study was prepared by impregnation method. SO4 2- on SO4 2-/ZrO2 catalyst was introduced from an aqueous 1M-H2SO4 solution. The catalysts were characterized by SEM images, XRD patterns, and FT-IR spectra. The catalytic activity was examined by measuring the conversion of phenol and styrene in a liquid-phase batch reactor. Almost 100% conversion of both phenol and styrene over 15-SO4 2-/ZrO2 catalyst were obtained at reaction temperature of 100 °C and reaction time of 6 hr. Amount of catalyst to the reactants was 15 wt%. At same reaction conditions, selectivity of MSP, DSP, and TSP were 23.6%, 52.1%, and 5.4%, respectively. It was known that the selectivity to DSP was increased as IR absorption peak of 1236 cm-1 corresponding to O­S­O bonds was increased.

Effect of Molar Concentration of NH4OH on Photocatalytic Activity in Preparation of Nanosized TiO2 Powder from Spent Titanium Chip by Sol-Gel Method.

The TiO2 powder was prepared from the spent titanium chips by applying the sol-gel method. The spent titanium chip was dissolved in HCl solution, and then NH4OH solution was added. The molar concentration of NH4OH solution was 2 M, 4 M, 8 M, and 10 M. Obtained TiO2 powders were calcined at 200 degrees C, 400 degrees C, and 600 degrees C. The prepared TiO2 powder was characterized using a particle size analysis, BET surface area, and XRD analysis. The crystal structure of the TiO2 powder was rutile type and anatase. The highest BET surface area of TiO2 powder was 432.8 m2/g. The photocatalytic property of the TiO2 powder was evaluated as decomposition rate of methylene blue(MB) by using a liquid phase stirred reactor. UV source was a UV-A, and concentration of MB in most experiments was 8 ppm. The concentration of MB was measured by absorbance at 664 nm using UV spectroscopy. Photocatalytic efficiency of prepared TiO2 powder depended highly on concentration of NH4OH solution. The TiO2 powder prepared with 8 M-NH4OH solution showed the highest efficiency, the decomposition efficiency at decomposition time of 2 hr and MB concentration of pH 8 was 98%.