Carbon-Rich Plasma-Deposited Silicon Oxycarbonitride Films Derived from 4-(Trimethylsilyl)morpholine as a Novel Single-Source Precursor.

4-(trimethylsilyl)morpholine O(CH2CH2)2NSi(CH3)3 (TMSM) was investigated as a single-source precursor for SiCNO films synthesis. Optical emission spectroscopy of plasma generated from TMSM/He, TMSM/H2, and TMSM/NH3 gas mixtures revealed the presence of N2, CH, H, CN, and CO species. The last two are suggested to be responsible for the lowering of carbon concentration in the films in comparison with the precursor. The refractive index ranged from 1.5 to 2.0, and bandgap varied from 2.0 to 4.6 eV, which pointed that some of the films can be used as antireflective coatings in silicon photovoltaic cell technologies and dielectric layers in electronic devices.

Application of DUT-4 MOF structure switching for optical and electrical humidity sensing.

The threshold structural transformation of the DUT-4 metal-organic framework (MOF) from an ordered to distorted phase during exposure to ambient conditions has been revealed. The in situ X-ray diffraction analysis, in situ Raman and FTIR spectroscopy, scanning electron microscopy and synchronous thermal analysis have been used for investigation. The reversible effect of exposure time and humidity on such a phase transition has been confirmed. We also demonstrated that the observed phase transition correlated well with changes in the optical and electronic properties of DUT-4, paving the way to a new family of MOF-based phase change materials for optoelectronic applications.

Electron delocalization in defect-containing graphene and its influence on tetrel bond formation.

Using the advanced analyses of electron density and fermionic potential, we show how electron delocalization influences the ability of defect-containing graphene to form tetrel bonds. The Cg atoms of a vacancy defect can produce one nonpolar interaction, alongside a peculiar polar Cg⋯Cg bond. The latter stems from the presence of a localized electron pair on a vacancy defect Cg atom and the local depletion of electron localization on another Cg atom. This interaction is an example of intralayer tetrel bond. In the presence of an absorbed molecule of bisphenol A diglycidyl ether (DGEBA), graphene is able to form incipient tetrel Cg⋯O bonds with an ether group oxygen. In contrast to an epoxy group oxygen, the disposition of the ether oxygen often causes the orientation of electron-rich π-domains of graphene carbon on the weakly expressed electrophilic region of the oxygen. In the case of graphene with a point Si defect, the Si atom can form quite strong Si⋯C interactions with the DGEBA aryl carbons. In contrast to other noncovalent bonds, this interaction significantly alters the electron (de)localization on the Si atom and in the aryl ring. The reliability of the obtained results is enhanced by the use of multiple 2D periodic models with defects located at different positions along the DGEBA skeleton.

Optical Properties of Tricarboxylic Acid-Derived Carbon Dots.

Herein, we report the characterization of two types of luminescent carbon dots (CDs) synthesized by the hydrothermal treatment of citric acid and trans-aconitic acid by using ammonia solution as a nitrogen dopant. The lateral size range of nanoparticles for CDs lies in the range of 3-15 nm. The intense blue photoluminescence (PL) was emitted by the CDs at around 409-435 nm under the excitation of 320 nm. The PL quantum yield of the synthesized CDs ranged from 26.4 to 51%. Our results of the structural and optical properties of CDs imply that molecular fluorophores are an important part of the structure; in particular, the main contribution to the PL is carried by the fluorophores based on citrazinic acid derivatives, which formed during the synthesis of CDs.

Structural phase transitions in flexible DUT-8(Ni) under high hydrostatic pressure.

The behaviours of the open pore (op) and closed pore (cp) phases of the flexible Ni2(ndc)2(dabco) (ndc - 2,6-naphthalene dicarboxylate, dabco - 1,4-diazabicyclo[2.2.2]octane, DUT-8(Ni)) metal-organic framework under high hydrostatic pressures up to 10 GPa in isopropanol and silicone oil were studied by Raman spectroscopy. Ab initio simulations of vibrational spectra were performed for the open and closed pore phases, which allowed us to disclose the characteristic vibrational modes affected by the structural transitions under pressure. Analysis of theoretical and experimental Raman data suggests that the op-cp transition involves gateway vibrations at 25 and 67 cm-1, corresponding to trampoline/rotational motions of aromatic linkers. The experiments reveal the formation of new distorted cp phases at pressures higher than 2 GPa, which are formed without amorphisation. The transition between the cp phase and the distorted cp phase is reversible. The experiments also reveal the pivotal role of the pressure transmitting medium on the phase transition behaviour.

Electronic criterion for categorizing the chalcogen and halogen bonds: sulfur-iodine interactions in crystals.

Diversity of mutual orientations of Y-S and I-X and covalent bonds in molecular crystals complicate categorizing noncovalent chalcogen and halogen bonds. Here, the different types of S...I interactions with short interatomic distances are analysed. The selection of S...I interactions for the categorization of the chalcogen and halogen bonds has been made using angles that determine the mutual orientation of electron lone pairs and σ-holes interacted S and I atoms. In complicated cases of noncovalent interactions with `hole-to-hole' of S and I orientations, distinguishing the chalcogen and halogen bonds is only possible if the atom is uniquely determined, which also provides the electrophilic site. The electronic criterion for chalcogen/halogen bonds categorizing that is based on analysis of dispositions of electron density and electrostatic potential minima along the interatomic lines has been suggested and its effectiveness has been demonstrated.

A Novel Family of Polyiodo-Bromoantimonate(III) Complexes: Cation-Driven Self-Assembly of Photoconductive Metal-Polyhalide Frameworks.

In the presence of different cations, reactions of [SbBr6 ]3- and I2 result in a new family of diverse supramolecular 1D polyiodide-bromoantimonate networks. The coordination number of Sb, as well as geometry of assembling {Ix }n- polyhalide units, can vary, resulting in unprecedented structural types. The nature of I⋅⋅⋅Br interactions was studied by DFT calculations; estimated energy values are 1.6-6.9 kcal mol-1 . Some of the compounds showed strong photoconductivity in thin films, suggesting multiple feasible applications in optoelectronics and solar energy conversion.

Testing the tools for revealing and characterizing the iodine-iodine halogen bond in crystals.

To understand what tools are really suitable to identify and classify the iodine-iodine non-covalent interactions in solid organic polyiodides, we have examined the anisotropy of the electron density within the iodine atomic basin along and across the iodine-iodine halogen bond using the Laplacian of electron density, one-electron potential and electron localization function produced by Kohn-Sham calculations with periodic boundary conditions. The Laplacian of electron density exhibits the smallest anisotropy and yields a vague picture of the outermost electronic shells. The one-electron potential does not show such a deficiency and reveals that the valence electron shell for the halogen-bond acceptor iodine is always wider than that for the halogen-bond donor iodine along its σ-hole direction. We have concluded that the one-electron potential is the most suitable for classification of the iodine-iodine bonds and interactions in complicated cases, while the electron localization function allows to distinguish the diiodine molecule bonded with the monoiodide anion from the typical triiodide anion.

Halochromic coordination polymers based on a triarylmethane dye for reversible detection of acids.

Chromeazurol B (Na2HL) is a pH-sensitive (halochromic) dye based on a hydroxytriarylmethane core and two carboxylate functional groups, which makes it suitable for the synthesis of coordination polymers. Two new coordination polymers [NaZn4(H2O)3(L)3]·3THF·3H2O (1) and [Zn3(H2O)3(µ2-OH2)(µ3-OH)(HL)2(H2L)]·2THF·3H2O (2) incorporating Chromeazurol B linkers have been prepared and characterised. The structure of 1 comprises pentanuclear heterometallic {Zn4Na} nodes linked by six L3- anions to give a layered structure with a honeycomb topology. 2 crystallizes as a double-chain ribbon (ladder) structure with two types of metal node: a mononuclear Zn(ii) cation and tetranuclear {Zn(ii)}4 cluster. Chromeazurol B anions link each tetranuclear cluster to four individual Zn(ii) cations and each Zn(ii) cation with four tetranuclear clusters. Both compounds show pH-sensitivity in water solution which can be observed visually, giving the first example of a halochromic coordination polymer. The halochromic properties of 1 towards HCl vapors were systematically investigated. As-synthesized violet-grey 1 reversibly changes color from orange to pink in the presence of vapors of 2 M and 7 M HCl, respectively. The coordination of the Chromeazurol B anion at each color stage was examined by diffuse reflectance spectroscopy and FT-IR measurements. The remarkable stability of 1 to acid and the observed reversible and reproducible color changes provide a new design for multifunctional sensor materials.