Cellular uptake of self-emulsifying drug-delivery systems: polyethylene glycol versus polyglycerol surface.

Aim: Comparison of the impact of polyethylene glycol (PEG) and polyglycerol (PG) surface decoration on self-emulsifying drug delivery system (SEDDS)-membrane interaction and cellular uptake. Materials & methods: PEG-, PEG/PG- and PG-SEDDS were assessed regarding their self-emulsifying properties, surface charge, bile salt fusibility, cellular uptake and interaction with endosome-mimicking membranes. Results: SEDDS exhibited droplet sizes between 150 and 175 nm, a narrow size distribution and self-emulsified within 7 min. Higher PEG-surfactant amounts in SEDDS resulted in charge-shielding and thus in a decrease of ζ potential up to Δ11 mV. The inert PEG-surface hampered bile salt fusion and interfered SEDDS-cell interaction. By reducing the PEG-surfactant amount to 10%, cellular uptake increased twofold compared with PEG-SEDDS containing 40% PEG-surfactant. PG-SEDDS containing no PEG-surfactants showed a threefold increased cellular uptake. Furthermore, complete replacement of PEG-surfactants by PG-surfactants led to enhanced cellular interaction and improved disruption endosome-like membranes. Conclusion: PG-surfactants demonstrated high potential to address PEG-surface associated drawbacks in SEDDS.

A gellan gum derivative as in-situ gelling cationic polymer for nasal drug delivery.

The aim of the present study was the development of a novel gellan gum derivative exhibiting mucoadhesive properties for nasal application. Accomplishing this, amino groups have been introduced to the polymeric backbone. The resulting synthesis products were characterized in terms of the amount of attached amino groups, regarding hydration, zeta potential and gel characteristics. Mucoadhesiveness was assessed studying rheological synergism, by rotating cylinder and regarding tensile studies. Next to erythrocyte-/cytotoxicity evaluation, the impact on ciliary beat frequency of nasal epithelial cells was investigated. Results revealed coupling rates up to 1259.50 ± 75.98 µmol/g polymer as well as accelerated hydration of the derivatives. Comparing aminated with unmodified gellan, enhanced mucoadhesion was verified by a 32-fold increase in viscosity of polymer/mucus mixtures and by a 14-fold extended mucosal adhesion time. Tensile studies demonstrated a 9-fold higher total work of adhesion and a 3.75-fold elevated maximum detachment force. Cellular membrane was not seriously impaired. CBF studies proved a reversible inhibition due to the application of the novel derivative. According to the outlined findings, aminated gellan gum can be considered as a promising excipient for nasal dosage forms improving drug bioavailability by superior adhesive features.

Synthesis and in vitro characterization of a preactivated thiolated acrylic acid/acrylamide-methylpropane sulfonic acid copolymer as a mucoadhesive sprayable polymer.

AIM: Development of a preactivated thiomer as sprayable excipient for mucoadhesive formulations. METHODS: CG4500 (acrylic acid/acrylamide-methyl propane sulfonic acid copolymer) was thiolated by conjugation with L-cysteine and preactivated by further modification with 2-mercaptonicotinic acid (MNA) in a two-step synthesis and characterized regarding degree of modification and cytotoxicity on Caco-2 cells. The mucoadhesive properties of this novel thiomer were evaluated via rheological synergism, tensile and mucosal residence time studies. Furthermore, the sprayability of the thiomer was evaluated. RESULTS: The newly synthesized derivatives CG4500-SH and CG4500-S-S-MNA showed mean coupling rates of 651 µmol thiol groups and 264 µmol MNA per gram polymer, respectively. Even for the unmodified polymer a rheological synergism was observed with isolated porcine intestinal mucus, which was 2.81-fold higher in case of the preactivated thiomer. Mucoadhesion studies on freshly excised porcine intestinal mucosa confirmed these results via a 2.43-fold higher total work of adhesion and a 2.31-fold higher mucosal residence time of the preactivated thiomer. In sprayability tests it was shown that solutions of the preactivated thiomer could be sprayed in concentrations up to 12% (m/V). CONCLUSION: The novel polymer CG4500-S-S-MNA is a promising sprayable excipient for mucoadhesive formulations.

Development and In Vitro Evaluation of Stearic Acid Phosphotyrosine Amide as New Excipient for Zeta Potential Changing Self-Emulsifying Drug Delivery Systems.

PURPOSE: Development of zeta potential changing SEDDS containing newly synthesized derivative stearic acid phosphotyrosine amide. METHODS: Stearoyl chloride was conjugated with phosphotyrosine, which is substrate for the brush border enzyme intestinal alkaline phosphate. The synthesized derivative was implemented in different SEDDS formulations and the zeta potential changing properties and the concluding mucus diffusion abilities were evaluated. RESULTS: Stearic acid phosphotyrosine amide was successfully synthesized and incorporated into SEDDS. A SEDDS formulation containing the new derivative showed a zeta potential of -14 mV before, and + 2 mV after enzymatic cleavage by intestinal alkaline phosphatase. Experiments on a Caco-2 monolayer demonstrated that the phosphate cannot only be cleaved by isolated enzyme, but also by enzyme, which was expressed by cells. The mucus diffusion abilities of the untreated, negatively charged SEDDS were significantly higher compared to the enzymatically cleaved, positively charged SEDDS. CONCLUSION: The developed stearic acid phosphotyrosine represents a promising excipient for zeta potential changing SEDDS. Graphical Abstract.

Zeta potential changing nanoemulsions: Impact of PEG-corona on phosphate cleavage.

The aim of this study was to evaluate the impact of a PEG-corona on oily droplets of a nanoemulsion on phosphate cleavage on their surface. A PEG-free nanoemulsion composed of 60% oleic acid, 30% Capmul MCM EP and 10% Span 85 being additionally stabilized by 1% cetyltrimethylammonium bromide (CTAB) and 3% phosphatidic acid (PA) was evaluated regarding phosphate release, zeta potential change and mucus permeation properties. In order to evaluate the impact of PEG-corona on phosphate release 10%, 20% and 30% of polyethoxylated-35 castor oil were incorporated in the nanoemulsion. The developed PEG-free nanoemulsion exhibited the droplet size of 123 nm with PDI of 0.24, whereas the droplet size of the nanoemulsions containing PEG ranged from 166 nm to 128 nm with PDI about 0.26. In case of the PEG-free formulation enzymatically induced phosphate cleavage was 3-fold and 7-fold higher than that from formulations containing 20% and 30% PEG-surfactant, respectively. Accordingly, the zeta potential shift of PEG-free formulation reached ~Δ 40 mV within 4 h, whereas zeta potential of PEG-containing formulations did not show any significant changes remaining constant at ~-30 mV. In contrast, PEG-containing formulations exhibited a 3.3-fold to 4-fold higher mucus permeation than the PEG-free formulation. According to the results, a PEG-corona has a great impact on phosphate cleavage and zeta potential change, which has to be taken into consideration for the development of highly efficient zeta potential changing nanocarriers, as zeta potential constitutes one of the crucial parameter regarding the permeation properties through physiological barriers.

Hydrophobic ion pairing (HIP) of (poly)peptide drugs: Benefits and drawbacks of different preparation methods.

In order to incorporate hydrophilic macromolecular drugs into lipid-based formulations (LBF), HIP has shown great potential. In this study, different HIP methods were compared with each other. Hydrophobic complexes were formed between bovine serum albumin (BSA) and either dodecyl sulfate, cetyl trimethylammonium or 1,2-dipalmitoyl-sn-glycero-3-phosphate applying the organic solvent-free method, Bligh-Dyer method and biphasic metathesis reaction either with ethyl acetate or chloroform as organic phase. Complex formation efficiency was determined. Hydrophobicity of the obtained complexes was characterized by their apparent partition coefficient between 1-butanol and water. The highest complex formation efficiency was achieved with the Bligh-Dyer method, followed by the organic solvent-free method and the biphasic metathesis reaction. When applying the organic solvent-free method, complex formation efficiency was hampered at higher surfactant concentrations due to the formation of micelles. Furthermore, this method could only be applied for water-soluble compounds. On the contrary, the Bligh-Dyer method was robust towards high surfactant concentrations. Moreover, it enables the use of water-insoluble compounds. The rank order Bligh-Dyer method > organic solvent-free method > biphasic metathesis reaction was confirmed by the log D. According to these results, the Bligh-Dyer method appears advantageous for HIP. However, the organic-solvent free method is an adequate alternative for water-soluble compounds.

Phosphorylated PEG-emulsifier: Powerful tool for development of zeta potential changing self-emulsifying drug delivery systems (SEDDS).

AIM: It was the aim of this study to synthesize a phosphorylated emulsifier possessing a PEG-linker for establishment of a potent zeta potential changing system in self-emulsifying drug delivery systems (SEDDS). METHODS: N,N'-Bis(polyoxyethylene)oleylamine (POA) was phosphorylated utilizing pyrophosphoric acid. Successful synthesis of POA bisphosphate (POAP) was confirmed by NMR and HR CS MAS. After incorporation of 1% POAP into SEDDS (Kolliphor RH 40, Capmul PG-8, Labrafac Lipophile WL 1349, Labrafac PG; 30/20/20/30, v/v), according emulsions were incubated with intestinal alkaline phosphatase (IAP) and the zeta potential was measured. Additionally, the amount of released phosphate upon incubation with IAP or on Caco-2 cells was quantified by malachite green assay. Finally, cell viability studies on Caco-2 cells were performed and mucus permeation properties with and without IAP preincubation were assessed. RESULTS: POAP was synthesized as brown viscous liquid with a yield of 36% and could be incorporated into SEDDS. By incubation with IAP a zeta potential shift from -15.1 to 6.5 mV was observed. A corresponding phosphate release in presence of isolated IAP as well as on Caco-2 cells was found. Assessment of the cytotoxic potential revealed no significant alteration in the safety profile of SEDDS by incorporation of POAP. Mucus permeation studies exposed a 2-fold higher permeation of fluorescein diacetate (FDA) having been embedded in SEDDS loaded with POAP in comparison to blank formulation and 3-fold higher permeability than for emulsions having been preincubated with phosphatase. CONCLUSION: The novel phosphorylated surfactant exhibiting a PEG-linker facilitated a potent zeta potential change of SEDDS.

The Effect of Counterions in Hydrophobic Ion Pairs on Oral Bioavailability of Exenatide.

The aim of this study was to evaluate the potential of n-octadecyl sulfate (SOS) as a counterion for hydrophobic ion pairing (HIP) with exenatide-a potent glucagon-like peptide-1 (GLP-1) analogue in the treatment of diabetes mellitus-to improve its oral bioavailability. Exenatide was ion-paired with SOS and docusate (DOC) serving as the gold standard followed by the incorporation in a self-emulsifying drug delivery system (SEDDS) comprising Capmul MCM EP, Captex 355, Kolliphor RH40, and propylene glycol at a mass ratio of 41:15:40:4. The hydrophobicity of exenatide-SOS and exenatide-DOC was characterized by determining the butanol-water partition coefficient (log Pbutanol/water). Droplet size and zeta potential of the ion pair-loaded SEDDS were characterized followed by intestinal membrane permeability determination on freshly excised rat intestines compared to exenatide solution. Furthermore, the oral bioavailability of exenatide-SOS- and exenatide-DOC-loaded SEDDS was also evaluated in vivo in healthy male Sprague-Dawley rats. Hydrophobic ion pairing increased the log Pbutanol/water of exenatide from -1.9 to 2.0 for exenatide-SOS and to 1.2 for exenatide-DOC. SEDDSs loaded with 0.26% (m/m) exenatide-SOS and 0.17% (m/m) exenatide-DOC had mean droplet size less than 30 nm and negative zeta potential. Ex vivo permeation experiments revealed 3.5-fold and 6.4-fold improvement in membrane permeability of the exenatide-SOS-loaded SEDDS vs. the exenatide-DOC-loaded SEDDS and exenatide solution, respectively. The orally administered exenatide-SOS-loaded SEDDS and exenatide-DOC-loaded SEDDS resulted in relative oral bioavailability vs. subcutaneous injection (SC) of 19.6 and 15.2%, respectively. Within this study, the key role of counterions for oral peptide delivery via HIP could be confirmed, and SOS was identified as a promising surfactant for this purpose.

Development and in vitro characterization of an oral self-emulsifying delivery system (SEDDS) for rutin fatty ester with high mucus permeating properties.

The aim of this study was to develop and evaluate a self-emulsifying delivery system (SEDDS) for oral rutin fatty ester administration and to improve its mucus permeating properties by the incorporation of the silicon polymer poly [dimethylsiloxane-co-(3-(2-(2-hydroxyethoxy)ethoxy)propyl]methylsiloxane] (PDMSHEPMS) in the formulation. In order to increase the lipophilicity of the flavonoid and to dissolve it in SEDDS, enzymatic acylation of rutin with lauric acid was catalyzed by lipase from Candida antarctica in acetone. Different formulations were evaluated regarding their emulsifying properties and ability to dissolve the rutin ester. Suitable SEDDS was chosen and characterized regarding droplet size, polydispersity index, and zeta potential. The rutin fatty ester was loaded into SEDDS to 7% (w/w). Different concentrations of PDMSHEPMS were incorporated in SEDDS for following mucus permeation studies. Formulation with 10% of PDMSHEPMS showed 1.9-fold increase in mucus permeation compared to the formulation without PDMSHEPMS. Furthermore, the formulation with 10% of PDMSHEPMS showed a significant increase in mucus permeation compared with rutin fatty ester without formulation. According to these results, SEDDS containing PDMSHEPMS might be a promising strategy to increase the oral bioavailability of rutin.

Development and in vitro evaluation of a self-emulsifying drug delivery system (SEDDS) for oral vancomycin administration.

The aim of this study was to develop a self-emulsifying drug delivery system (SEDDS) containing the glycopeptide antibiotic vancomycin (VAN) with improved intestinal mucosa permeating properties in order to increase oral drug absorption. VAN was effectively incorporated into SEDDS increasing the lipophilicity of the drug via hydrophobic ion pairing (HIP) with cetyltrimethylammonium bromid (CTAB). Newly developed SEDDS formulations containing VAN/CTAB complex were characterized with respect to droplet size, polydispersity index and zeta potential. Furthermore, permeating properties were investigated in porcine intestinal mucus using Transwell setup and on freshly excised porcine intestinal mucosa utilizing Ussing-type chamber. In addition, minimum inhibitory concentration (MIC) of VAN/CTAB-SEDDS against Staphylococcus aureus was evaluated. The developed formulations F1 (25% Capmul 808G EP/NF, 37.5% Cremophor RH 40, 37.5%), F2 (26.5% Capmul 808G EP/NF, 33.2% Cremophor RH 40, 13.8% Transcutol, 26.5% DMSO) and F3 (28.8% Captex 8000, 35% Cremophor EL, 20% Transcutol, 16.2% DMSO) with a mean droplet size of 14 nm, 15 nm and 153 nm, respectively, exhibited improved ability to permeate porcine intestinal mucosal barrier. F1-VAN/CTAB showed 219-fold, F2-VAN/CTAB 46-fold and F3-VAN/CTAB 63-fold higher permeation of VAN through the mucus layer after 4 h in comparison to free VAN. Moreover, all formulations demonstrated a 4-8-fold improvement in permeation of intestinal mucosa compared to free VAN solution. Additionally, F2-VAN/CTAB with a MIC of 0.313 mg/L showed higher effectivity against S. aureus (ATCC® 29213) compared to free VAN. According to these results, HIP combined with SEDDS should be taken into consideration as promising tool for oral antibiotic delivery.

Development of self-emulsifying drug delivery systems (SEDDS) for ciprofloxacin with improved mucus permeating properties.

The aim of this study was to develop a self-emulsifying drug delivery system (SEDDS) containing the fluoroquinolone antibiotic ciprofloxacin (CIP) exhibiting highly mucus permeating properties and antimicrobial activity in in vitro models. Various SEDDS formulations were developed and evaluated regarding droplet size, polydispersity index, zeta potential and formulation stability. Furthermore, SEDDS permeating properties were investigated in porcine intestinal mucus, as well as in cystic fibrosis (CF) sputum freshly collected from CF patients using Transwell® setup and single particle tracking (SPT), respectively. In order to evaluate antibacterial activity in an in vitro model against Staphylococcus aureus and other pathogens, minimum inhibitory concentrations (MIC) and time-kill curves were determined. In addition, in vitro release of ciprofloxacin and cytotoxicity studies were conducted. The preselected formulations F1 and F11 exhibited a mean droplet size of 79 nm and 25 nm, respectively, and a negative zeta potential. SEDDS containing CIP exhibit improved ability to permeate porcine intestinal mucus and CF sputum. After 4 h, F1-CIP formulation resulted in a 1.6 - fold and F11-CIP a 2.0 - fold higher amount of permeated ciprofloxacin through the sputum layer with respect to free CIP. Moreover, the antimicrobial activity of F11-CIP against S. aureus was higher than that of free CIP. According to these results, SEDDS formulations should be taken into consideration as promising delivery systems for the treatment of pulmonary infections accompanied by mucus dysfunction.

In vivo evaluation of an oral self-emulsifying drug delivery system (SEDDS) for exenatide.

BACKGROUND: The aim of the study was to develop an oral self-emulsifying drug delivery system (SEDDS) for exenatide and to evaluate its in vivo efficacy. METHODS: Exenatide was lipidised via hydrophobic ion pairing with sodium docusate (DOC) and incorporated in SEDDS consisting of 35% Cremophor EL, 25% Labrafil 1944, 30% Capmul-PG 8 and 10% propylene glycol. Exenatide/DOC was characterized in terms of lipophilicity evaluating the octanol/water phase distribution (logP). Exenatide/DOC SEDDS were characterized via droplet size analysis, drug release characteristics (log DSEDDS/release medium determination) and mucus permeation studies. Furthermore, the impact of orally administered exenatide/DOC SEDDS on blood glucose level was investigated in vivo on healthy male Sprague-Dawley rats. RESULTS: Hydrophobic ion pairing in a molar ratio of 1:4 (exenatide:DOC) increased the effective logP of exenatide from -1.1 to 2.1. SEDDS with a payload of 1% exenatide/DOC had a mean droplet size of 45.87 ±â€¯2.9 nm and a Log DSEDDS/release medium of 1.9 ±â€¯0.05. Permeation experiments revealed 2.7-fold improved mucus diffusion for exenatide/DOC SEDDS compared to exenatide in solution. Orally administered exenatide/DOC SEDDS showed a relative bioavailability (versus s.c.) of 14.62% ±â€¯3.07% and caused a significant (p < .05) 20.6% decrease in AUC values of blood glucose levels. CONCLUSION: According to these results, hydrophobic ion pairing in combination with SEDDS represents a promising tool for oral peptide delivery.