RESUMO
Fifth generation (5G) technology aims to provide high peak data rates, increased bandwidth, and supports a 1 millisecond roundtrip latency at millimeter wave (mmWave). However, higher frequency bands in mmWave comes with challenges including poor propagation characteristics and lossy structure. The beamforming Butler matrix (BM) is an alternative design intended to overcome these limitations by controlling the phase and amplitude of the signal, which reduces the path loss and penetration losses. At the mmWave, the wavelength becomes smaller, and the BM planar structure is intricate and faces issues of insertion losses and size due to the complexity. To address these issues, a dual-layer substrate is connected through the via, and the hybrids are arranged side by side. The dual-layer structure circumvents the crossover elements, while the strip line, hybrids, and via-hole are carefully designed on each BM element. The internal design of BM features a compact size and low-profile structure, with dimensions of 23.26 mm × 28.92 mm (2.17 λ0 × 2.69 λ0), which is ideally suited for the 5G mmWave communication system. The designed BM measured results show return losses, Sii and Sjj, of less than -10 dB, transmission amplitude of -8 ± 2 dB, and an acceptable range of output phase at 28 GHz.
RESUMO
In recent years, the development of healthcare monitoring devices requires high performance and compact in-body sensor antennas. A normal-mode helical antenna (NMHA) is one of the most suitable candidates that meets the criteria, especially with the ability to achieve high efficiency when the antenna structure is in self-resonant mode. It was reported that when the antenna was placed in a human body, the antenna efficiency was decreased due to the increase of its input resistance (Rin). However, the reason for Rin increase was not clarified. In this paper, the increase of Rin is ensured through experiments and the physical reasons are validated through electromagnetic simulations. In the simulation, the Rin is calculated by placing the NMHA inside a human's stomach, skin and fat. The dependency of Rin to conductivity (σ) is significant. Through current distribution calculation, it is verified that the reason of the increase in Rin is due to the decrease of antenna current. The effects of Rin to bandwidth (BW) and electrical field are also numerically clarified. Furthermore, by using the fabricated human body phantom, the measured Rin and bandwidth are also obtained. From the good agreement between the measured and simulated results, the condition of Rin increment is clarified.
