Characterization of hybrid organo-silica monoliths for possible application in the gradient elution of peptides.

We characterized thermally polymerized organo-silica hybrid monolithic capillaries to test their applicability in the gradient elution of peptides. We have used a single-pot approach utilizing 3-(methacryloyloxy)propyltrimethoxysilane (MPTMS), ethylene dimethacrylate (EDMA), and n-octadecyl methacrylate (ODM) as functional monomers. The organo-silica monolith containing MPTMS and EDMA was compared with the stationary phase prepared by adding ODM to the original polymerization mixture. Column prepared using a three-monomer system provided a lower accessible volume of flow-through pores, a higher proportion of mesopores, and higher efficiency. We utilized isocratic and gradient elution data to predict peak widths in gradient elution. Both protocols provided comparable results and can be used for peptide peak width prediction. However, applying gradient elution data for peak width prediction seems simpler. Finally, we tested the effect of gradient time on achievable peak capacity in the gradient elution of peptides with a column prepared with a three-monomer system providing a higher peak capacity. However, the performance of hybrid organo-silica monolithic stationary phases in gradient elution of peptides must be improved compared to other monolithic stationary phases. The limiting factor is column efficiency in highly aqueous mobile phases, which needs to be focused on.

Review of recent advances in development and applications of organic-silica hybrid monoliths.

Organic-silica hybrid monoliths attracted attention as an alternative to extensively researched organic polymer-based and silica-based counterparts. The development and applications of these materials as extraction and separation media in capillary liquid chromatography and capillary electrochromatography were previously reviewed in several manuscripts. In this review, we will concentrate on work published since mid-2016 focusing on advances in their development using sol-gel chemistry of tetra- and trialkoxysilanes and subsequent surface modification with organic monomers, and "one-pot" strategy incorporating sol-gel chemistry of alkoxysilanes and free-radical polymerization, ring-opening polymerization, or thiol-based click polymerization with organic monomers. Approaches adapted to the preparation of hybrid monoliths made with polyhedral oligomeric silsesquioxanes will be covered as well.

Monolithic Poly(styrene-co-divinylbenzene) Columns for Supercritical Fluid Chromatography-Mass Spectrometry Analysis of Polypeptide.

The organic polymer-based monolithic columns have been evaluated as the separation media for analysis of peptides using supercritical fluid chromatography-mass spectrometry (SFC-MS). We demonstrate for the first time the SFC-MS separation of a mixture of polypeptides carried out using poly(styrene-co-divinylbenzene) monolithic columns and carbon dioxide/methanol mobile phase. A gradient from 2 to 40% methanol modifier containing 0.1% TFA as an acidic additive was applied for the optimized elution and the separation was achieved in less than 3 min. Selected ion monitoring enabled detection of selected masses characteristic of three ionophoric pentadecapeptide antibiotics gramicidin A, B, and C and their two corresponding isoforms. Furthermore, their identity was confirmed through determination of their [M + 2H]2+, [M + 2Na]2+, and [M + H + Na]2+ ions acquired by positive-ion electrospray ionization-mass spectrometry (ESI-MS).

Applications of monolithic columns in gas chromatography and supercritical fluid chromatography.

Porous monoliths are well-known stationary phases in high-performance liquid chromatography and capillary electrochromatography. Contrastingly, their use in other types of separation methods such as gas or supercritical fluid chromatography is limited and scarce. In particular, very few studies address the use of monolithic columns in supercritical fluid chromatography. These are limited to silica-based monoliths and will be covered in this review together with an underlying reason for this trend. The application of monoliths in gas chromatography has received much more attention and is well documented in two reviews by Svec and Kurganov published in 2008 and 2013, respectively. The most recent studies, covered in this review, build on the previous findings and on further understanding of the influence of preparation conditions on porous properties and chromatographic performance of poly(styrene-co-divinylbenzene), polymethacrylate, and silica-based monolithic columns while expanding to polymer-based monoliths with incorporated metal organic frameworks and to vinylized hybrid silica monoliths. In addition, the potential application of porous layer open tubular monolithic columns in low-pressure gas chromatography will be addressed.

"Single-pot" approach towards the preparation of alkyl and polyfluoroalkyl organo-silica monolithic capillaries for reversed-phase liquid chromatography.

Organo-silica monolithic capillary columns were prepared using thermally initiated polymerization of mixtures containing 3-(methacryloyloxy)propyltrimethoxysilane as the silicon-containing monomer, an aqueous acid catalyst, ethylene dimethacrylate as the cross-linker, a functional monomer selected from the group comprising octadecyl methacrylate, trifluoroethyl methacrylate, pentafluoropropyl methacrylate, and heptadecafluorodecyl methacrylate, toluene as the porogen, and 2,2'-azobisisobutyronitrile as the initiator. The permeability of the monoliths was controlled by varying the composition of the polymerization mixture. Chromatographic properties of resulting monolithic 100 µm i.d. capillaries were evaluated utilizing four sets of probe compounds under isocratic elution conditions in the reversed-phase mode. Baseline separation of alkylbenzenes and the best steric selectivity were achieved using the octadecyl methacrylate monolithic column verifying that its surface was the most hydrophobic. In contrast, separation of a mixture containing polar compounds was observed using columns prepared in the absence of the functional monomer due to the presence of residual surface silanols at the pore surface. Polyfluoroalkyl stationary phases, especially those with a high number of fluorine atoms, exhibited the highest selectivity towards fluorine-containing analytes.

Advances in the development and applications of organic-silica hybrid monoliths.

This review will concentrate on recent progress (since 2013) toward preparation of organic-silica hybrid monoliths and their latest applications as extraction and separation media largely focusing on capillary liquid chromatography and capillary electrochromatography. Main emphasis will be given to advancement of approaches relying on the sol-gel chemistry of tetra- and tri-alkoxysilanes, sol-gel chemistry of alkoxysilanes and free-radical copolymerization with organic monomers, and free radical and ring-opening copolymerization of polyhedral oligomeric silsesquioxanes with organic monomers. Hybrid molecularly-imprinted polymer monoliths and hybrid monoliths made with non-silica-based precursors or in combination with metal alkoxides will be included as well.

Tuning preparation conditions towards optimized separation performance of thermally polymerized organo-silica monolithic columns in capillary liquid chromatography.

Tuning of preparation conditions, such as variations in the amount of a porogen, concentration of an aqueous acid catalyst, and adjustment in polymerization temperature and time, towards optimized chromatographic performance of thermally polymerized monolithic capillaries prepared from 3-(methacryloyloxy)propyltrimethoxysilane has been carried out. Performance of capillary columns in reversed-phase liquid chromatography was assessed utilizing various sets of solutes. Results describing hydrophobicity, steric selectivity, and extent of hydrogen bonding enabled comparison of performance of hybrid monolithic columns prepared under thermal (TSG) and photopolymerized (PSG) conditions. Reduced amounts of porogen in the polymerization mixture, and prolonged reaction times were necessary for the preparation of monolithic columns with enhanced retention and column efficiency that reached to 111,000 plates/m for alkylbenzenes with shorter alkyl chains. Both increased concentration of catalyst and higher temperature resulted in faster polymerization but inevitably in insufficient time for pore formation. Thermally polymerized monoliths produced surfaces, which were slightly more hydrophobic (a methylene selectivity of 1.28±0.002 TSG vs 1.20±0.002 PSG), with reduced number of residual silanols (a caffeine/phenol selectivity of 0.13±0.001 TSG vs 0.17±0.003 PSG). However, steric selectivity of 1.70±0.01 was the same for both types of columns. The batch-to-batch repeatability was better using thermal initiation compared to monolithic columns prepared under photopolymerized conditions. RSD for retention factor of benzene was 3.7% for TSG capillaries (n=42) vs. 6.6% for PSG capillaries (n=18). A similar trend was observed for columns prepared within the same batch.

Kinetics and mechanism of oxidation of tryptophan by ferrate(VI).

Kinetics of the oxidation of tryptophan (Trp) and kynurenine (Kyn), precursors of nitrogenous disinfection byproducts (N-DBP), by ferrate(VI) (Fe(VI)O4(2-), Fe(VI)) were investigated over the acidic to basic pH range. The second-order rate constants decreased with increase in pH, which could be described by the speciation of Fe(VI) and Trp (or Kyn). The trend of pH dependence of rates for Trp (i.e., aromatic α-amino acid) differs from that for glycine (i.e., aliphatic α-amino acid). A nonlinear relationship between transformation of Trp and the added amount of Fe(VI) was found. This suggests that the formed intermediate oxidized products (OPs), identified by LC-PDA and LC-MS techniques, could possibly compete with Trp to react with Fe(VI). N-Formylkynurenine (NFK) at pH 7.0 and 4-hydroxyquinoline (4-OH Q) and kynurenic acid (Kyn-A) at pH 9.0 were the major OPs. Tryptophan radical formation during the reaction was confirmed by the rapid-freeze quench EPR experiments. The oxygen atom transfer from Fe(VI) to NFK was demonstrated by reacting Fe(18)O4(2-) ion with Trp. A proposed mechanism explains the identified OPs at both neutral and alkaline pH. Kinetics and OPs by Fe(VI) were compared with other oxidants (chlorine, ClO2(•), O3, and (•)OH).

Photopolymerized organo-silica hybrid monolithic columns: characterization of their performance in capillary liquid chromatography.

Porous hybrid organo-silica monoliths have been prepared inside pretreated 100 µm id UV transparent fused-silica capillaries using simultaneous sol-gel transition and polymerization of 3-(methacryloyloxy)propyl trimethoxysilane in the presence of toluene as a porogen. The sol-gel reaction was catalyzed by hydrochloric acid while various photoinitiators including azobisisobutyronitrile, 2,2-dimethoxy-2-phenylacetophenone, and Irgacure 819 were used for the photopolymerization carried out under irradiation with UV light at a wavelength of 254 or 365 nm. The chromatographic performance of photopolymerized monolithic columns in RP liquid chromatographic mode was assessed with respect to the following metrics: column efficiency, methylene and steric selectivity, effect of silanol groups, van Deemter plot, permeability, and pore size distribution. Columns with an efficiency of up to 77 000 plates/m for benzene has been achieved at a flow velocity of 0.47 mm/s. The performance of photopolymerized hybrid monolithic column was compared to the performance of columns prepared via thermally initiated polymerization.

Fluorescence properties and dipole moments of novel fused thienobenzofurans. Solvent and structural effects.

The electronic absorption, fluorescence excitation and emission spectra, and fluorescence quantum yields of novel fused thienobenzofurans, including thieno[3,2-b][1]benzofuran (1), [1]benzothieno[3,2-b]furan (2), and [1]benzothieno[3,2-b][1]benzofuran (3), were recorded in fourteen solvents of different polarities at room temperature. Compound 2 was not fluorescent. Experimental ground-state dipole moments of compounds 1-3 were measured in benzene at 298 K and compared with the corresponding theoretical dipole moment values. The solvent effects on the electronic absorption and fluorescence spectra of these thienobenzofurans were quantitatively investigated by means of solvatochromic correlations based on the Kawski-Chamma-Viallet and McRae equations. A weak negative solvatochromic behavior was found for these compounds, showing that their dipole moments are slightly lower in the excited singlet-state than in the ground-state. Kamlet-Abboud-Taft multiparameter relationships were also established for electronic absorption and fluorescence wavenumbers, and fluorescence quantum yields in most solvents, demonstrating the occurrence of specific solute-solvent interactions.

In situ sol-gel preparation of porous alumina monoliths for chromatographic separations of adenosine phosphates.

A method enabling the in situ preparation of porous alumina monoliths within 100 µm i.d. fused silica capillaries has been developed. These monoliths were prepared using the sol-gel process from a mixture consisting of an inorganic aluminum salt, a porogen, an epoxide, and a solvent. We investigated the effects of varying the preparation conditions on the physical characteristics of the monoliths with respect to their potential application in chromatographic separations. The best columns were obtained from a mixture of aluminum chloride hexahydrate, N,N-dimethylformamide, water, ethanol and propylene oxide. Adenosine phosphates were then separated in the optimized column with retention increasing according to number of phosphate functionalities.