RESUMO
Transmission below the cable cut-off wavelength may be a concern in some systems, especially for an optical supervisory channel (OSC) operating below the signal transmission band in systems built with G.654 fiber. In this work, we constructed a cabled span of G.654-compliant fiber and measured the multipath interference (MPI) generated during propagation through the span at a range of wavelengths below the cable cut-offs of the constituent fibers. Measurements were made under a range of conditions including different splice losses and the presence or absence of higher order mode filters placed around the splices. MPI levels were found to be sufficiently low at wavelengths far below the average cable cut-off such that OSC transmission was penalty-free. We compare the experimental results to modeling predictions and find very good agreement.
RESUMO
Universal fiber has an LP01 mode field diameter approximately matched to that of standard single mode fiber, while being a multimode fiber. We analyzed the dependence of the mode field diameter on the core diameter for different core delta values. Guided by the analysis, a universal fiber having a delta of 1.2% was fabricated, showing significantly reduced coupling loss of ~2.3 dB with conventional multimode fiber. We demonstrated that the fiber can transmit with full system reach in both single mode and VCSEL-based multimode transmissions, including 100G SR4, 40G sWDM, and 100G CWDM4 for the first time.
RESUMO
We present a detailed description of a computationally efficient, semi-analytical method (SAM) to calculate the electomagnetic field distribution in a 1D-periodic, subwavelength-structured metal film placed between dielectric substrates. The method is roughly three orders of magnitude faster than the finite-element method (FEM). SAM is used to study the resonant transmission of light through nanoplasmonic structures, and to analyze the role of fundamental and higher-order Bloch surface plasmons in transmission enhancement. The method is also suitable for solving the eigenvalue problem and finding modes of the structure. Results obtained with SAM, FEM, and the finite-difference time-domain method show very good agreement for various parameters of the structure.
Assuntos
Metais/química , Modelos Teóricos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Refratometria/métodos , Ressonância de Plasmônio de Superfície/métodos , Simulação por Computador , Luz , Fótons , Espalhamento de RadiaçãoRESUMO
We propose an efficient coherent power scaling scheme, the multichip vertical-external-cavity surface-emitting laser (VECSEL), in which the waste heat generated in the active region is distributed on multi-VECSEL chips such that the pump level at the thermal rollover is significantly increased. The advantages of this laser are discussed, and the development and demonstration of a two-chip VECSEL operating around 970 nm with over 19 W of output power is presented.