RESUMO
Background: This study evaluated the gingival crevicular fluid (GCF) and Peri- implant crevicular fluid (PICF) concentrations of interleukin-1 beta (IL-1ß), interleukin-6 (IL-6), tumor necrosis factor-alpha (TNF-α) and active metalloproteinase-8 (a-MMP-8) in sites with healthy conditions vs. sites affected by periodontitis (PER) and peri-implantitis (PIM). Methods: Periodontally healthy (PH) sites with PER, sites with peri-implant health (PIH), and sites with PIM were investigated intra-individually, according to the inclusion criteria of each group. Probing pocket depth (PPD), plaque index, gingival index, and the presence or absence of bleeding on probing (BoP) were evaluated. In GCF and PICF samples, IL-1ß, IL-6, and TNF-α were quantified by ELISA Duoset® kit in combination with Ultramark® micro-ELISA digital reader; a-MMP8 concentration was analyzed by a chairside test (Perio/ImplantSafe®) in combination with a digital reader (ORALyzer®). Results: The concentrations of IL-6 and IL-1ß, TNF-α, and a-MMP-8 were significantly higher in the PIM and PER sites compared to healthy sites (P<0.05). Significantly higher concentrations of IL-1ß and a-MMP-8 were found in PIM vs. PER sites (P<0.05), while the concentrations of IL-6 and TNF-α did not differ between the PIM and PER groups (P>0.05). Conclusion: aMMP-8, IL-6, IL-1ß, and TNF-α presented higher GCF/PICF concentrations in diseased periodontal and peri-implant sites. However, only the concentrations of IL-1ß and a-MMP-8 were significantly higher in PIM than in PER sites.
RESUMO
The aim of the current study was to retrospectively investigate the prevalence of peri-implant mucositis (PIM) and peri-implantitis (P) in a long-term follow-up (≥20 years) of implants with the same body design and body surface but different collar surfaces with laser-microtextured grooves (LMGSs) vs. no laser-microtextured grooves (no-LMGSs) in private practice patients. Furthermore, several patient-related, implant-related, site-, surgical-, and prosthesis-related potential disease risk factors were analyzed. A chart review of patients receiving at least one pair of implants (one with an LMGS and the other without LMGS) in the period 1993-2002 was used. Chi-square analysis was used to determine if a statistically significant difference between the investigated variables and PIM/P was present. Possible risk factors were statistically evaluated by a binary logistic regression analysis. A total of 362 patients with 901 implant-supported restorations (438 with LMGS and 463 no-LMGS) were included in the study. The cumulative survival rates of implants at 5, 10, 15, and 20 years were 98.1%, 97.4%, 95.4%, and 89.8%, respectively, for the LMGS group, and 93.2%, 91.6%, 89.5%, and 78.3% for the no-LMGS group. The difference was statistically significant at all timepoints (p < 0.05). In total, at the end of the follow-up period, 45.7% of patients and 39.8% of implants presented PIM, and 15.6% of patients and 14% of implants presented P. A total of 164 LMGS implants (37.4%) and 195 no-LMGS implants (42.1%) presented peri-implant mucositis, while 28 (6.3%) of LMGS implants and 98 (21.1%) no-LMGS implants demonstrated peri-implantitis. Differences between LMGS implants and no-LMGS implants were statistically significant (p < 0.05). The binary logistic regression identified collar surface, cigarette smoking, histories of treated periodontitis, and lack of peri-implant maintenance as risk factors for P. After at least 20 years of function in patients followed privately, LMGS implants compared to no-LMGS implants presented a statistically and significantly lower incidence of P. Implant collar surface, cigarette smoking, previously treated periodontitis, and lack of peri-implant maintenance are factors with significant association to P.
RESUMO
BACKGROUND: Orthodontic treatment planning for an impacted canine tooth requires accurate information about its position. The aim of this study was to compare the diagnostic accuracy of two conventional orthodontic radiographic modalities with cone-beam computed tomography (CBCT) for localization of impacted maxillary canine teeth. MATERIALS AND METHODS: Panoramic radiographs, lateral cephalograms, and CBCT scans of 30 patients with unilaterally impacted maxillary canine teeth were retrieved from the archives. Eight expert orthodontists evaluated the parameters related to the location of impacted canine teeth by using panoramic radiographs and lateral cephalograms of patients. After 4 weeks, the same parameters were evaluated on CBCT scans of patients. The diagnostic accuracy of conventional modalities and CBCT was compared with each other and also with the gold standard. RESULTS: The conventional radiographic modalities and CBCT had similar accuracy for assessment of the overall inclination (p = 0.11), apex morphology (p = 0.18), and mesiodistal position of the apex (p = 0.12). CBCT had significantly higher accuracy for determination of incisal tip location (p = 0.001), labiopalatal (p = 0.001) and vertical (p = 0.01) position of the crown tip, minimum bone thickness covering the crown (p = 0.001), and root resorption of the adjacent tooth (p = 0.001). CONCLUSION: The combination of panoramic radiographs and lateral cephalograms was sufficiently accurate to assess some diagnostic parameters such as overall inclination, apex morphology, and mesiodistal apex location of impacted canine teeth.
Assuntos
Dente Canino , Dente Impactado , Humanos , Dente Canino/diagnóstico por imagem , Imageamento Tridimensional/métodos , Incisivo , Maxila/diagnóstico por imagem , Dente Impactado/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico/métodosRESUMO
Endodontic orthograde retreatments are considered one of the possible treatment options in case of post-treatment diseases considering the promising results present in the literature. Despite this, a plethora of articles have been published on this topic, and drawing conclusions could be challenging. For this reason, this review aims to summarize the crucial points on each aspect of non-surgical endodontic retreatments, discussing and comparing the current protocols, techniques, materials, and indications. Taking into consideration data from the literature, in terms of diagnosis, CBCT should be considered the first choice, since it can thoroughly affect the diagnosis and treatment plan. Regarding the procedural phases, some conclusions can be drawn: when present, coronal restoration materials such as crowns, partial prostheses, post, and core should be removed; the use of magnification devices, ultrasonic instruments, and an in-depth interpretation of radiographic images with both 2D and 3D images are strongly recommended during the orifice location; additional protocols such as irrigants activation, ultrasonic cleaning, and rotary or reciprocating instrumentation of treated canals are strongly recommended for filling materials removal and to achieve a high-quality chemo-mechanical disinfection; perforations should be treated as soon as possible, and the material of choice to treat them is the MTA or other calcium-silicate-based repair materials; the presence of ledges does not intrinsically reduce the success rate of RCRts if properly managed; in case of instrument fragments, their removal should be considered as the first treatment option, however many variables should be considered to select the proper technique or consider the option of bypassing.
RESUMO
This retrospective clinical study compared two different professional maintenance therapy (MT) approaches (with and without periodic removal and decontamination of prosthetic components) on peri-implant inflammatory clinical and biochemical parameters after 5 years of implant function. A retrospective analysis based on patient records was used to assess inflammatory clinical and biochemical parameters around dental implants placed by the same clinician in a private practice. The Plaque Index (PI), peri-implant probing depth (PPD), mucosal recession (REC), bleeding on probing (BOP), and radiographic marginal bone level were determined at baseline and at each follow-up year. Moreover, at the last follow-up visit, the peri-implant intrasulcular levels of active metalloproteinasis 8 (aMMP-8) were also assessed. All participants were under MT with a 6-month recall interval. A total of 92 patients with 132 implants were selected. At the end of the study period, 12 patients with 12 implants were classified as dropouts. The remaining 80 patients and 120 implants were classified into two groups: Group 1 (42 patients, 62 implants) received MT with periodic removal and decontamination of prosthetic components; Group 2 (38 patients, 58 implants) received MT without periodic removal and decontamination of prosthetic components. No statistical differences were found between the groups regarding PI, PPD, and REC. Group 1 presented a statistically significant higher number of sites with BOP (12.4% vs 6.2%). Marginal bone loss was statistically higher in Group 2 than in Group 1 (0.23 ± 0.6 mm vs 0.78 ± 0.3 mm). Intrasulcular levels of aMMP-8 were statistically higher in Group 1 than in Group 2. The supplemental application of periodic removal and decontamination of prosthetic components during MT had a significantly positive effect on the inflammatory status of peri-implant tissues.
Assuntos
Implantes Dentários , Humanos , Estudos Retrospectivos , Descontaminação , Índice de Placa DentáriaRESUMO
Aim: The present study was designed to assess trends in contemporary endodontic practice regarding the techniques and materials used in endodontic therapy among dental practitioners from various regions of India. Methods: A cross-sectional questionnaire-based study was conducted amongst dentists who were pursuing postgraduates in endodontics (PG Endo) and other branches (PG-OB), specialists from other branches (MDS-OB) and specialists in endodontics (MDS-Endo) in various dental colleges representing East, West, North, South, and Central zones through an e-survey using Google forms. State-wise postgraduate dental college lists were obtained from the Dental Council of India (DCI) website. Using a multistage cluster random sampling method and considering the unanticipated response rate, emails were sent to 2100. A 29-item close-ended questionnaire, framed according to different aspects of endodontic treatment, was used to record the responses. Results: When the distribution of the groups of dentists was compared, the central zone had the highest number of PG-OB (44.2%) and the lowest number of MDS-Endo (8.4%). The electronic apex locator (EAL) method of working length determination has been reported less among MDS-Endo than MDS-OB. The difference between the usage of various methods for working length determination was significant among the different groups in all the zones. (p < 0.0001) Most MDS-Endo preferred the rotary method of instrumentation over the combination method for different zones. The majority of dental practitioners preferred a combination method of instrumentation. Conclusion: Zone-wise comparisons among dentists showed the majority of general dental practitioners preferred the combination method (radiographs and electronic apex locator) for working length determination. Most MDS-Endo preferred the rotary method of instrumentation over the combination method for different zones. All dental practitioners did not so commonly use magnification in all the zones. The single cone technique was the most opted by dental practitioners of all the zones.
RESUMO
BACKGROUND: Mandibular first molars appear to be the most commonly tooth subjected to a root canal treatment, therefore a better understanding of the anatomy critical zones for resistance of this teeth may decrease the treatment's failure rate. So, this study was conducted to evaluate the dentin thickness of the danger zone in mesial roots of mandibular first molars using cone beam computed tomography in an Iranian population. METHODS: In this cross-sectional study, 210 Cone Beam Computed Tomography acquisition of the mandibular first molars were collected from a radiology center in Qazvin. The dentin thickness of the mesial roots (mesiobuccal and mesiolingual canals) was measured from the furcation to 5 mm below. The relationship between the dentin thickness in the danger zone and parameters, like age, gender, placement side, root length, the curvature of the canal, canal type, presence of middle mesial canal, and distance between the orifices of the mesial canals was investigated. Frequency, mean and standard deviation for variables were calculated, and data analysis was done by SPSS using simple and multiple linear regression and Pearson correlation coefficient. Also, two-sample t-test was used to compare mesiobuccal and mesiolingual on two sides. The significant level was also considered at (p < 0.05). RESULTS: The average minimum thickness of danger zone dentin was found to be 0.885 ± 0.259 mm in the mesiobuccal canal and 0.906 ± 0.206 mm in the mesiolingualcanal. Also, the minimum thickness of dentin in the mesiobuccal and mesiolingual canals in the range of 0 to 1 mm from the furcation was more than in other areas. There was no significant relationship between the minimum dentin thickness of the danger zone with gender, placement side, root length, canal type, and mesial canal entrance distance. But with increasing age, the thickness of dentin in the danger zone in the mesiolingualcanal increased significantly (p = 0.008). It was also observed that with the increase in the curvature of the canal, the thickness of the dentin in the danger zone in the mesiobuccal canal decreased (moderately curved (p = 0.008), severely curved (p = 0.046)). In addition, the thickness of the dentin in the mesiobuccal and mesiolingual canal was less in the samples with the middle mesial canal (p = 0.047, 0.044). CONCLUSIONS: Less dentin thickness in the danger zone in the mesial roots of mesiolingual mandibular first molars was seen in younger patients in mesiolingual canal, with a greater degree of canal curvature in the mesiobuccal canal and teeth with a middle mesial canal. Therefore, it is suggested that large taper instruments should be used with more precision to prevent complications.
Assuntos
Dentina , Mandíbula , Humanos , Estudos Transversais , Irã (Geográfico) , Dentina/diagnóstico por imagem , Dentina/anatomia & histologia , Mandíbula/diagnóstico por imagem , Tomografia Computadorizada de Feixe CônicoRESUMO
Background and Objectives. To differentiate the intensity of postoperative pain after primary molar pulpectomy employing manual instrumentation versus two single-file systems with different kinetics (the XP-Endo shaper file with adaptive instrumentation vs. the Kedo-SG blue file with continuous rotation instrumentation). Materials and Methods. This three-arm, single-blind, randomized clinical trial included assessing 75 healthy children between 4 to 9 years who required pulpectomy for primary molars (mandibular first and second). The three groups each had an equal number of children. Children in Group 1 had their teeth instrumented with the XP-endo Shaper, children in Group 2 had their teeth instrumented with the Kedo-SG Blue file, and children in Group 3 had their teeth instrumented manually using K-files. The degree of postoperative pain was measured using a four-point pain scale at 6-, 12-, 24-, 48-, and 72-h following therapy. Each participant's parent received five flashcards with four faces and a word characterizing each face. The data were analyzed using Kruskal-Wallis and chi-square tests. The level of significance was set to 5%. Results. During the follow-up period, there was a significant difference in postoperative pain intensity between the three groups. The XP-endo shaper was associated with considerably decreased post operative at the 6- and 12-h interval followed by Kedo-SG. The highest post-operative discomfort across the groups was related to the patients who underwent manual instrumentation. Conclusion. In comparison to rotary and manual instrumentation, postoperative pain severity was reduced with adaptive instrumentation.
Assuntos
Pulpectomia , Preparo de Canal Radicular , Criança , Humanos , Incidência , Método Simples-Cego , Dor Pós-OperatóriaRESUMO
The pushout bond strength of root fillings at radicular dentin was investigated employing NaOCl, CHX, and homoeopathic mother tincture (Arnica montana) as an irrigant. Sixty human permanent single-rooted extracted teeth were decoronated. The root canals were instrumented using Pro taper universal rotary system (Dentsply Tulsa Dental; Tulsa, Oklahoma) and were prepared up to F3 apical size. The roots were then randomly divided into three groups according to irrigation solution (n = 20) according to the final irrigation regimen: Group I: 3 mL 5.25% NaOCl followed by 3 mL Saline (control); Group II: 3 mL Arnica montana (10%, w/v) followed by 3 mL Saline; Group III: 3 mL CHX followed by 3 mL Saline. The canals were dried using paper points. The canals were coated with AH Plus sealer (Dentsply DeTey, Konstaz, Germany) with the aid of a Lentulo spiral (Dentsply DeTey, Konstaz, Germany) and obturated with #F3 gutta-percha. Each root was then horizontally sliced into three slices, labelled coronal, middle, and apical, each measuring 2 mm thick. Furthermore, at a crosshead speed of 2 mm/min, the test was carried out using the universal testing apparatus. The 5.25% NaOCl significantly decreased the bond strength of AH Plus to dentin. Both CHX and Arnica montana were capable of reversing the compromised pushout of AH Plus to NaOCl-treated dentin. After using NaOCl as an irrigant, the danger of diminished binding capacity of AH Plus to root canal walls arises. Final irrigation with Arnica montana and CHX reduces this risk.
RESUMO
(1) The possibility of knowing information about the anatomy in advance, in particular the arrangement of the endodontic system, is crucial for successful treatment and for avoiding complications during endodontic therapy; the aim was to find a correlation between a minimally invasive and less stressful endodontic access on Ni-Ti rotary instruments, but which allows correct vision and identification of anatomical reference points, simplifying the typologies based on the shape of the pulp chamber in coronal three-dimensional exam views. (2) Based on the inclusion criteria, 104 maxillary molars (52 maxillary first molars and 52 maxillary second molars) were included in the study after 26 Cone Beam Computed Tomography (CBCT) acquisitions (from 15 males and 11 females). And linear measurements were taken with the CBCT-dedicated software for subsequent analysis. (3) The results of the present study show data similar to those already published about this topic. Pawar and Singh's simplified classification actually seems to offer a schematic way of classification that includes almost all of the cases that have been analyzed. (4) The use of a diagnostic examination with a wide Field of View (FOV) and low radiation dose represents an exam capable of obtaining a lot of clinical information for endodontic treatment. Nevertheless, the endodontic anatomy of the upper second molar represents a major challenge for the clinician due to its complexity both in canal shape and in ramification.
RESUMO
This investigation aimed to examine the post-operative pain experienced following single-visit root canal treatment using the XP-endo shaper sequence (XPS), full-sequence self-adjusting file (SAF), and manual K-files (HKF). A randomized equivalence parallel design, double-blinded clinical study was conducted on 120 patients with symptomatic irreversible pulpitis, with or without clinical signs of apical periodontitis. Only teeth with fully formed roots and no periapical lesions were incorporated in the study. Patients were apportioned to one of three groups (n = 40) randomly: Group 1-XPS, Group 2-SAF, and Group 3-HKF. Pre- and post-instrumentation pain was rated utilizing Visual Analog Scale (VAS) with a spectrum of 0-100 mm. The descriptive statistics and one-way ANOVA with 95% confidence intervals were used for statistical analysis. The mean VAS scores before instrumentation were consistent in all three groups. At 6, 24, 48, and 72 h, patients with root canals instrumented by SAF had the lowest post-instrumentation mean VAS score, followed by XPS. For all time intervals, the patients in the HKF group had the highest VAS score. The full-sequence SAF instrumentation resulted in less post-operative pain than the XP-endo plus protocol, while manual instrumentation with K-files resulted in the highest post-operative pain.
RESUMO
This study aimed to evaluate and compare two different fiber-reinforced composite materials in class I post-endodontic restoration in molars. A total of 50 patients were randomly assigned into two groups (n = 25 for each group); group A: everX Posterior (packable composite) with a top layer of solareX (nano-hybrid composite) and group B: everX Flow (flowable composite) with a top layer of G-aenial universal injectable (flowable composite). Patients were evaluated immediately after the procedure (baseline), at 6 months, and at 1 year time intervals based on the modified USPHS criteria. The statistical analysis using a chi-square test showed no statistically significant difference in the clinical performance of group A and group B. Clinical performance of the combination of everX Flow with overlying G-aenial universal injectable composite proved to be comparable with everX Posterior with overlying solareX composite as post-endodontic restorations in class I lesions in permanent molars.
RESUMO
The aim of this retrospective study was to investigate the relationship between the amount of early bone remodeling, the marginal bone loss (MBL) progression, and the peri-implant sulcular fluid concentration of active metalloproteinase-8 (a-MMP-8) and the incidence of peri-implantitis (P) over 5 years of implant function. It has been documented that dental implants with a high degree of early marginal bone loss (MBL) are likely to achieve additional increased MBL during function. Moreover, it has been speculated that early increased MBL might be a predictive factor for the subsequent onset of peri-implant inflammatory diseases. Clinical and radiographic data at implant placement (T0) and restoration delivery (TR) at 6 months (T1), 2 years (T2), and 5 years (T5) post-loading were retrospectively collected. MBL levels/rates (MBLr) and peri-implant sulcular fluid levels/rates of a-MMP-8 were assessed at TR, T1, T2, and T5. Implants were divided into two groups: group 1 with peri-implantitis (P+) and group 2 without peri-implantitis (P−). A multi-level simple binary logistic regression, using generalized estimation equations (GEEs), was implemented to assess the association between each independent variable and P+. A receiver operating characteristics (ROC) curve was used to evaluate an optimal cutoff point for T1 MBL degree and a-MMP-8 level to discriminate between P+ and P− implants. A total of 80 patients who had received 80 implants between them (39 implants with a laser-microtextured collar surface (LMS) and 41 implants with a machined collar surface (MS)) were included. Periapical radiographs and a software package were used to measure MBL rates. Peri-implant sulcular implant fluid samples were analyzed by a chairside mouth-rinse test (ImplantSafe®) in combination with a digital reader (ORALyzer®). Twenty-four implants (six with an LMS and eighteen with an MS) were classified as P+. No statistically significant association was found between the amount of early bone remodeling, MBL progression, and MBLr and the incidence of peri-implantitis. Implants with a-MMP-8 levels >15.3 ng/mL at T1 presented a significantly higher probability of P+. The amount of early marginal bone remodeling cannot be considered as an indicator of the subsequent onset of P, whereas high a-MMP-8 levels 6 months after loading could have a distinct ability to predict P.
RESUMO
The pattern of expansion of endodontic lesions in the jaws has been less commonly addressed in the literature. For this reason, the aim of this study is to assess the pattern of endodontic lesions of maxillary and mandibular posterior teeth using cone-beam computed tomography (CBCT). This cross-sectional study was conducted on 317 endodontic lesions of posterior teeth on CBCT scans retrieved from a radiology center in Qazvin, Iran, from 2020 to 2022. Endodontic lesions were assessed on sagittal, coronal, and axial sections by an endodontist and dental student using the Romexis software. The largest lesion diameter was measured occluso-apically, mesiodistally, and buccolingually. Lesion size was analyzed based on age, gender, jaw, tooth type, and presence/absence of root filling by independent samples t-tests and a one-way Analysis Of Variannce (ANOVA). The largest diameter of lesions in the maxilla and mandible was recorded in the occluso-apical dimension followed by buccolingual and mesiodistal dimensions (p > 0.05). The pattern of lesions was the same in teeth with and without endodontic treatment, but it was significantly different in maxillary and mandibular endodontically treated teeth in the occluso-apical and buccolingual dimensions (p < 0.05). No significant correlation was noted with tooth type or jaw except for maxillary and mandibular first molar lesions, which were significantly different in the occluso-apical dimension (p < 0.05). Lesion size in all three dimensions was significantly greater in males than females (p < 0.05), and was the highest in the occluso-apical dimension in both genders. In the maxilla, the mean lesion size significantly decreased in the mesiodistal dimension with age (p < 0.05). In conclusion, the largest lesion diameter in the maxilla and mandible was found in the occluso-apical dimension, indicating the role of bone density in the pattern of lesions.
RESUMO
Recent improvements in imaging techniques have profoundly facilitated the diagnosis of pathologies of the maxillofacial district and provided all the information necessary to plan an adequate treatment plan. Three-dimensional (3D) radiographic diagnostic exams, reworked by specific software that allow easy viewing of images and various graphic reworkings, are frequently applied to maxillofacial district for the diagnosis of various pathologies, which, until a few years ago, required several radiographic examinations.1,2.
Assuntos
Imageamento Tridimensional , SoftwareRESUMO
The aim of this study was to explain the mechanical differences between EdgeTaper Platinum (ETP) and ProTaper Gold (PTG) determining the transition temperatures and the composition of the alloy of ETP, since no data are present in literature. A total of 130 instruments were selected: 65 ETP F2 and 65 PTG F2. 20 instruments per type were submitted to each mechanical tests. The cyclic fatigue and torsional tests were performed at a pre-set temperature of 35 °C ± 1 °C. During the cyclic fatigue test, Time to fracture, number of cycles to fracture (NCF) and the fragment length (FL) were recorded. During the static torsional, Torque to Fracture (TtF) and FL were recorded. The fracture surface of 5 randomly selected fragments from each test was examined through a Scanning Electron Microscopy (SEM) and an EDX analysis was performed. 20 instruments per type were submitted to a bending test The force generated (grams) to bend each was recorded. Recorded data of mechanical and metallurgical tests were statistically analyzed using a one-way analysis of variance (ANOVA) test with significance set to a 95% confidence level. ETP F2 showed a higher cyclic fatigue resistance and bending ability than PTG F2, with a statistically significant difference (p < 0.05). PTG showed a higher torsional resistance with a statistically significant difference (p < 0.05). DSC analysis of 5 samples for each instrument type pointed out that the austenite finish temperature of PTG was higher than the ETP, respectively of 49.99 ± 3.31 (°C) and 38.92 ± 1.75 (°C). EDX analysis confirmed the near-equiatomic composition of the Ni-Ti alloys, with a presence of a third component recognized as rubidium in the ETP samples. ETP showed higher flexibility in comparison with PTG, despite the latter is characterized by a more martensitic characterization. since its Af temperature is higher than the ETP.
Assuntos
Endodontia , Temperatura Alta , Metalurgia , Ligas , Endodontia/instrumentaçãoRESUMO
INTRODUCTION: Because there are no data regarding an instrument recently introduced on the market (OneRECI; Coltene MicroMega, Besançon, France), the aim of this study was to assess its mechanical and metallurgical properties comparing them with the following widespread reciprocating instruments: Reciproc (VDW, Munich, Germany), Reciproc Blue (VDW), EdgeOne Fire (EdgeEndo, Albuquerque, NM), and WaveOne Gold (Dentsply Maillefer, Ballaigues, Switzerland). METHODS: A total of 65 nickel-titanium files from 5 different reciprocating systems (OneRECI, Reciproc, Reciproc Blue, EdgeOne Fire, and WaveOne Gold) were evaluated throughout a combined mechanical and metallurgical method. Mechanical performances of the selected file were examined by subjecting each specimen to cyclic fatigue and torsional and bending resistance tests, whereas their metallurgical properties were assessed by analyzing the nickel-titanium alloy composition and the phase transformation temperatures through energy-dispersive X-ray spectroscopy and differential scanning calorimetry, respectively. One-way analysis of variance and the post hoc Tukey test were performed with the significance level set to a 95% confidence level. RESULTS: Energy-dispersive X-ray spectroscopy showed a similar alloy composition for all of the tested files, with a nickel percentage of about 52%-53% and a corresponding percentage of titanium of 47%-48%, whereas the differential scanning calorimetry analysis, although it indicated martensitic characteristics for all files, showed differences in terms of phase transformation temperatures. Overall, OneRECI showed the best mechanical performances in terms of cyclic fatigue and torsional resistance (32.95 ± 2.33 seconds and 0.76 ± 0.03 Ncm, respectively) and flexibility (48.4 ± 4.1 g), with statistically significant differences for all tests (P < .05). The Reciproc files showed the worst flexibility and cyclic fatigue resistance (157.2 ± 8.3 g and 9.27 ± 1.18 seconds, respectively), whereas the EdgeOne Fire showed the lowest torsional resistance (0.39 ± 0.12 Ncm), with statistically significant differences (P < .05). CONCLUSIONS: Within the limitations of this study, the recently introduced OneRECI file showed the best mechanical performance in comparison to the tested instruments, with an equiatomic composition of the nickel-titanium alloy and a martensitic behavior.
Assuntos
Níquel , Titânio , Instrumentos Odontológicos , Desenho de Equipamento , Ouro , Teste de Materiais , Níquel/química , Preparo de Canal Radicular , Estresse Mecânico , Titânio/químicaRESUMO
AIM: To compare the clinical and radiographic conditions and the expression of pro-inflammatory cytokines in peri-implant crevicular fluid (PICF) at two-piece/bone level (TP/BL) versus one-piece/tissue level (OP/TL) single implants with a laser-microgrooved collar after at least 5 years of loading. MATERIALS AND METHODS: In total, 20 single TP/BL implants and 20 contralateral OP/TL implants, both with a laser-microgrooved collar surface, in 20 systemically and periodontally healthy subjects (12 males and 8 females, between the age of 36 and 64 [mean age of 49.7 ± 12.3 years]), were examined. Levels of IL-1ß, IL-1RA, IL-6, IL-8, IL-17, b-FGF, G-CSF, GM-CSF, IFN, MIP-1ß, TNF-α, and VEGF were assessed in PICF using the Bio-Plex 200 Suspension Array System. Plaque index (PI), probing depth (PD), bleeding on probing (BOP), and gingival recession (REC) were recorded. Radiographic crestal bone levels (CBL) were assessed at the mesial and distal aspects of the implant sites. RESULTS: The mean PI, PD, BOP, and REC values had no significant differences in either group. A higher mean value of CBL with statistical difference was detected for TP/BL compared with OP/TL implants. The levels of IL-1ß, IL-6, IL-8, GM-CSF, and MIP-1ß and TNF-α were higher at TP/BL implants than at OP/TL implants. However, only IL-1ß, IL-6, and TNF-α values presented significant differences between the groups. CONCLUSIONS: Although after 5 years of loading single TP/BL and OP/TL implants with a laser-microgrooved collar surface presented similar good clinical conditions, a higher proinflammatory state and higher crestal bone loss were detected for TP/BL implants.
Assuntos
Implantes Dentários , Adulto , Quimiocina CCL4 , Feminino , Fator Estimulador de Colônias de Granulócitos , Fator Estimulador de Colônias de Granulócitos e Macrófagos , Humanos , Proteína Antagonista do Receptor de Interleucina 1 , Interleucina-17 , Interleucina-6 , Interleucina-8 , Lasers , Masculino , Pessoa de Meia-Idade , Fator de Necrose Tumoral alfa , Fator A de Crescimento do Endotélio VascularRESUMO
BACKGROUND: The thorough knowledge of the anatomy of mandibular premolars is an essential factor for a correct approach to endodontic treatment, concerning both non-surgical and surgical treatment. OBJECTIVES: Since there is no data on the Italian population in this context, the aim of this study was to evaluate, from a surgical perspective, the anatomy of mandibular premolars among the Italian population through a cone-beam computed tomography (CBCT) analysis, considering the morphology of their root canals according to Vertucci's classification and the prospect of their apices with regard to the vestibular bone plate and the proximity to the inferior alveolar nerve and the mental foramen as well as to evaluate the most appropriate distance from the apex in the radicular resection (3 mm or 5 mm). MATERIAL AND METHODS: At total of 492 CBCT acquisitions (from 246 males and 246 females) were included retrospectively, evaluating 720 mandibular premolars. Age, gender, the tooth position in relation to the vestibular plate, the number of roots, the tooth length and the root length, the number of canals, the configuration of the root canal system according to Vertucci's criteria, C-shaped canals, the distance from the cementoenamel junction (CEJ) to the canal bifurcation, the number of apical foramina, and the distance from the apex to the inferior alveolar nerve or the mental foramen were evaluated. RESULTS: The study highlighted the frequent anatomic variability of the root canal system. It found the presence of 1 root for first and second premolars in 97% and 99% of cases, of 2 roots in 2.7% and 0.7% of cases, and of 3 roots in 0.3% and 0.3% cases, respectively. In 92% of cases, the mental foramen was located below a second premolar, or between a first premolar and a second premolar; only in 8% of cases, it was located close to a first premolar, but never as close as to a second premolar. CONCLUSIONS: Mandibular premolars show a truly surprising anatomical variability, especially for mandibular first premolars, which therefore requires adequate radiographic planning before providing any endodontic treatment, or especially endodontic retreatment or endodontic surgery. Taking into account proximity to the inferior alveolar nerve and the mental foramen, any surgical approach must be carefully planned. Frequently, a two-dimensional (2D) radiographic examination is not sufficient to fully understand the anatomical variability of these teeth.
Assuntos
Tomografia Computadorizada de Feixe Cônico Espiral , Raiz Dentária , Dente Pré-Molar/diagnóstico por imagem , Feminino , Humanos , Masculino , Mandíbula/diagnóstico por imagem , Estudos Retrospectivos , Raiz Dentária/diagnóstico por imagemRESUMO
In recent years, CBCT has proved to be extremely widely used and widespread in dentistry [...].