Ionic Liquids with More than One Metal: Optical and Electrochemical Properties versus d-Block Metal Combinations.

Thirteen N-butylpyridinium salts, including three monometallic [C4 Py]2 [MCl4 ], nine bimetallic [C4 Py]2 [M1-x a Mx b Cl4 ] and one trimetallic compound [C4 Py]2 [M1-y-z a My b Mz c Cl4 ] (M=Co, Cu, Mn; x=0.25, 0.50 or 0.75 and y=z=0.33), were synthesized and their structure and thermal and electrochemical properties were studied. All compounds are ionic liquids (ILs) with melting points between 69 and 93 °C. X-ray diffraction proves that all ILs are isostructural. The conductivity at room temperature is between 10-4 and 10-8  S cm-1 . Some Cu-based ILs reach conductivities of 10-2  S cm-1 , which is, however, probably due to IL dec. This correlates with the optical bandgap measurements indicating the formation of large bandgap semiconductors. At elevated temperatures approaching the melting points, the conductivities reach up to 1.47×10-1  S cm-1 at 70 °C. The electrochemical stability windows of the ILs are between 2.5 and 3.0 V.

Ionic Liquid-Assisted Synthesis of Mesoporous Silk Fibroin/Silica Hybrids for Biomedical Applications.

New mesoporous silk fibroin (SF)/silica hybrids were processed via a one-pot soft and energy-efficient sol-gel chemistry and self-assembly from a silica precursor, an acidic or basic catalyst, and the ionic liquid 1-butyl-3-methylimidazolium chloride, acting as both solvent and mesoporosity-inducer. The as-prepared materials were obtained as slightly transparent-opaque, amorphous monoliths, easily transformed into powders, and stable up to ca. 300 °C. Structural data suggest the formation of a hexagonal mesostructure with low range order and apparent surface areas, pore volumes, and pore radii of 205-263 m2 g-1, 0.16-0.19 cm3 g-1, and 1.2-1.6 nm, respectively. In all samples, the dominating conformation of the SF chains is the ß-sheet. Cytotoxicity/bioactivity resazurin assays and fluorescence microscopy demonstrate the high viability of MC3T3 pre-osteoblasts to indirect (≥99 ± 9%) and direct (78 ± 2 to 99 ± 13%) contact with the SF/silica materials. Considering their properties and further improvements, these systems are promising candidates to be explored in bone tissue engineering. They also offer excellent prospects as electrolytes for solid-state electrochemical devices, in particular for fuel cells.

Strontium doped poly-ε-caprolactone composite scaffolds made by reactive foaming.

In the reconstruction and regeneration of bone tissue, a primary goal is to initiate bone growth and to stabilize the surrounding bone. In this regard, a potentially useful component in biomaterials for bone tissue engineering is strontium, which acts as cationic active agent, triggering certain intracellular pathways and acting as so called dual action bone agent which inhibits bone resorption while stimulating bone regeneration. In this study we established a novel processing for the foaming of a polymer (poly-ε-caprolactone) and simultaneous chemical reaction of a mixture of calcium and strontium hydroxides to the respective carbonates using supercritical carbon dioxide. The resultant porous composite scaffold was optimized in composition and strontium content and was characterized via different spectroscopic (infrared and Raman spectroscopy, energy dispersive X-ray spectroscopy), imaging (SEM, µCT), mechanical testing and in vitro methods (fluorescence vital staining, MTT-assay). As a result, the composite scaffold showed good in vitro biocompatibility with partly open pore structure and the expected chemistry. First mechanical testing results indicate sufficient mechanical stability to support future in vivo applications.

Ionogels Based on Poly(methyl methacrylate) and Metal-Containing Ionic Liquids: Correlation between Structure and Mechanical and Electrical Properties.

Ionogels (IGs) based on poly(methyl methacrylate) (PMMA) and the metal-containing ionic liquids (ILs) bis-1-butyl-3-methlimidazolium tetrachloridocuprate(II), tetrachloride cobaltate(II), and tetrachlorido manganate(II) have been synthesized and their mechanical and electrical properties have been correlated with their microstructure. Unlike many previous examples, the current IGs show a decreasing stability in stress-strain experiments on increasing IL fractions. The conductivities of the current IGs are lower than those observed in similar examples in the literature. Both effects are caused by a two-phase structure with micrometer-sized IL-rich domains homogeneously dispersed an IL-deficient continuous PMMA phase. This study demonstrates that the IL-polymer miscibility and the morphology of the IGs are key parameters to control the (macroscopic) properties of IGs.

Biocompatible hollow-strut, silica enriched zirconia foams.

BACKGROUND: Porous ceramic biomaterials structures are accepted components in applied research in the field of tissue engineering due to their mechanical properties being closer to structural tissue like bone or other properties related to improved biocompatibility. OBJECTIVE: Hollow-strut, silica enriched zirconia foams were made by replication of polyurethane via impregnation with a suspension of zirconia-particles in polysiloxane. METHODS: Two-step heat treatment allowed conversion of the precursor structures into hollow-strut ceramic foams which were tested for their biocompatibility using an osteoblast cell line. Further, the material was characterized via different spectroscopic (Raman-spectroscopy, EDX) and imaging (SEM, µCT) methods. RESULTS: The material shows open cell porosity with hollow struts and sufficient structural integrity for handling and an expected chemistry as investigated by Raman and EDX spectroscopy. The material further supported cell growth and overall good biocompatibility. CONCLUSIONS: The investigated composite foam shows promising properties and is potentially interesting as candidate material for future bone tissue engineering applications.