Elemental analysis of a single-wall carbon nanotube candidate reference material.

A material containing single-wall carbon nanotubes (SWCNTs) with other carbon species, catalyst residues, and trace element contaminants has been prepared by the National Institute of Standards and Technology for characterization and distribution as Standard Reference Material SRM 2483 Carbon Nanotube Soot. Neutron activation analysis (NAA) and inductively coupled plasma mass spectrometry (ICP-MS) were selected to characterize the elemental composition. Catalyst residues at percentage mass fraction level were determined with independent NAA procedures and a number of trace elements, including selected rare earth elements, were determined with NAA and ICP-MS procedures. The results of the investigated materials agreed well among the NAA and ICP-MS procedures and good agreement of measured values with certified values was found in selected SRMs included in the analyses. Based on this work mass fraction values for catalyst and trace elements were assigned to the candidate SRM.

Total selenium and selenomethionine in pharmaceutical yeast tablets: assessment of the state of the art of measurement capabilities through international intercomparison CCQM-P86.

Results of an international intercomparison study (CCQM-P86) to assess the analytical capabilities of national metrology institutes (NMIs) and selected expert laboratories worldwide to accurately quantitate the mass fraction of selenomethionine (SeMet) and total Se in pharmaceutical tablets of selenised-yeast supplements (produced by Pharma Nord, Denmark) are presented. The study, jointly coordinated by LGC Ltd., UK, and the Institute for National Measurement Standards, National Research Council of Canada (NRCC), was conducted under the auspices of the Comité Consultatif pour la Quantité de Matière (CCQM) Inorganic Analysis Working Group and involved 15 laboratories (from 12 countries), of which ten were NMIs. Apart from a protocol for determination of moisture content and the provision of the certified reference material (CRM) SELM-1 to be used as the quality control sample, no sample preparation/extraction method was prescribed. A variety of approaches was thus used, including single-step and multiple-step enzymatic hydrolysis, enzymatic probe sonication and hydrolysis with methanesulfonic acid for SeMet, as well as microwave-assisted acid digestion and enzymatic probe sonication for total Se. For total Se, detection techniques included inductively coupled plasma (ICP) mass spectrometry (MS) with external calibration, standard additions or isotope dilution MS (IDMS), inductively coupled plasma optical emission spectrometry , flame atomic absorption spectrometry and instrumental neutron activation analysis. For determination of SeMet in the tablets, five NMIs and three academic/institute laboratories (of a total of five) relied upon measurements using IDMS. For species-specific IDMS measurements, an isotopically enriched standard of SeMet (76Se-enriched SeMet) was made available. A novel aspect of this study relies on the approach used to distinguish any errors which arise during analysis of a SeMet calibration solution from those which occur during analysis of the matrix. To help those participants undertaking SeMet analysis to do this, a blind sample in the form of a standard solution of natural abundance SeMet in 0.1 M HCl (with an expected value of 956 mg kg(-1) SeMet) was provided. Both high-performance liquid chromatography (HPLC)-ICP-MS or gas chromatography (GC)-ICP-MS and GC-MS techniques were used for quantitation of SeMet. Several advances in analytical methods for determination of SeMet were identified, including the combined use of double IDMS with HPLC-ICP-MS following extraction with methanesulfonic acid and simplified two-step enzymatic hydrolysis with protease/lipase/driselase followed by HPLC-ICP-IDMS, both using a species-specific IDMS approach. Overall, satisfactory agreement amongst participants was achieved; results averaged 337.6 mg kg(-1) (n = 13, with a standard deviation of 9.7 mg kg(-1)) and 561.5 mg kg(-1) (n = 11, with a standard deviation of 44.3 mg kg(-1)) with median values of 337.6 and 575.0 mg kg(-1) for total Se and SeMet, respectively. Recovery of SeMet from SELM-1 averaged 95.0% (n = 9). The ability of NMIs and expert laboratories worldwide to deliver accurate results for total Se and SeMet in such materials (selensied-yeast tablets containing approximately 300 mg kg(-1) Se) with 10% expanded uncertainty was demonstrated. The problems addressed in achieving accurate quantitation of SeMet in this product are representative of those encountered with a wide range of organometallic species in a number of common matrices.

Collection and characterization of a bulk PM2.5 air particulate matter material for use in reference materials.

A contemporary PM2.5 (particulate matter smaller than 2.5 microns aerodynamic diameter) aerosol material from an urban site has been collected for the production of a new standard reference material that will be made available for the development of new PM2.5 air quality standards. Air particulate matter corresponding to the PM2.5 fraction was collected at an established Environmental Protection Agency monitoring site in Baltimore, Maryland. The air-sampling system that has been constructed for this collection separates fine particles with a cyclone separator and deposits them onto an array of Teflon membrane filters. The fine air particulate material is removed by ultrasonication or by mechanical means and collected for further preparation of standards. The composition of the collected PM2.5 aerosol, as well as the composition of the deposited PM2.5 aerosol, are determined by instrumental nuclear activation analysis and other techniques.

Determinations of subnanomole elemental levels by NAA and their possible impact on human health related issues.

Neutron activation analysis (NAA) is an appropriate tool for the determination of trace elements in biological systems. The virtually blank-free NAA procedures fittingly complement precautions employed in sampling and sample preparation of biological matrices. Results from instrumental NAA procedures used to establish baseline values and time trends for elements in human tissues demonstrate the advantages as well as the limits of these procedures for nanomole and, in a considerable number of instances, subnanomole elemental levels. In addition, subnanomole mass fractions have been determined with extremely low limits of detection by employing NAA with radiochemical separations isolating very low levels of radioactivity from the matrix background. The elements reviewed in this article include Cr, Se, Pt, and others that have been determined by NAA at subnanomole levels in human tissues and body fluids and in biological macromolecules.

A separation method to overcome the interference of calcium on the uranium determination by ICP-ES.

The accurate determination of uranium by Inductively Coupled Plasma Emission Spectrometry (ICP-ES) in calcium phosphate matrix suffers from a severe ionization interference due to the high calcium content of the samples. This leads to a signal depression up to 30%. For reliable determinations an extraction method based on anion exchange resin column chromatography is described which separates uranium for the needs in ICP-ES measurements. The results are comparable with results obtained by other determination methods. In addition, reference materials were measured to verify this extraction procedure.

Detection and determination of selenoproteins by nuclear techniques.

Microbeam X-ray spectrometry, energy-dispersive X-ray fluorescence analysis, and neutron activation analysis were evaluated for the detection of selenium contained in the selenoprotein glutathione peroxidase. The glutathione peroxidase had been previously separated using polyacrylamide gel electrophoresis. The use of Bragg-reflected polarized X-ray beams was employed in the X-ray fluorescence measurements to minimize the problem of scatter owing to the gel matrix. Current detection limits of selenium in a gel matrix are 2.1 ng in the bench-top microbeam X-ray system and 30-60 ng using XRF with polarized beams. Neutron activation analysis was used for quality-control measurements, with a detection limit here of < 0.08 ng. The work has in principle established the feasibility of such an approach.

Programs of the IAEA utilizing nuclear analytical techniques in the life sciences.

Nuclear analytical techniques have an important role in the IAEA in life sciences programs relating to human health. A major effort has recently been devoted to the determination of dietary intakes of trace elements, including studies in some countries affected by the Chernobyl accident. The same accident stimulated interest in using 129I (as determined by NAA and other techniques) to trace the distribution of fission products in the environment. Other research topics concern solid wastes, air pollution, exposure to mercury in selected human populations, and osteoporosis (including NAA studies of trace elements in human bone). Much of the IAEA's work is concerned with analytical quality control; new reference materials in preparation include lichen (for trace elements) and human hair (for total and methyl mercury).

Enhanced sensitivity for the determination of selenium by INAA.

A working analytical procedure for selenium determinations by INAA, using gamma spectrometry with a germanium well-type detector, is presented. The spectral line at 400.7 keV is employed, enhanced with the effect of energy summing in true coincidence of cascade photons. The main advantage of the method is high efficiency and reliable, interference-free results; potential drawbacks are increases in input count rate and pile-up losses, decrease in resolution, and sensitivity to errors in sample-to-detector geometry. The procedure is applied to certification analysis of reference materials, large-area biomonitoring by oak leave samples, and determination of separated proteins.

Current activities within the National Biomonitoring Specimen Bank.

The National Institute of Standards and Technology (NIST) has been involved in biological environmental specimen banking activities since 1979. These activities, which are known collectively as the National Biomonitoring Specimen Bank (NBSB), include the banking of a variety of specimens (human liver, sediment, mussels/oysters, fish tissue and marine mammal tissues) from several different projects supported by different government agencies. The two most recent projects, the Alaska Marine Mammal Tissue Archival Project (AMMTAP) and the National Marine Mammal Tissue Bank (NMMTB), focus on the collection, banking and analysis of marine mammal tissues and they are part of a comprehensive plan to address marine mammal monitoring, specimen banking and quality assurance of analytical measurements associated with contaminant analyses in marine mammals.

Determination of inorganic constituents in marine mammal tissues.

Analyses of selected tissues from the Alaska Marine Mammal Tissue Archival Project (AMMTAP) have provided comprehensive information related to levels of 36 trace elements and methyl-mercury in marine mammal tissues. Liver, kidney and muscle tissues from two northern fur seals, four ringed seals and six belukha whales were analyzed. The bulk of the investigated tissues and additional tissues from a total of 65 marine mammals are banked in the AMMTAP. The results are compared to literature values for trace element concentrations in marine mammal tissues and their relevance to environmental studies is discussed.

Effective tools for the trace element characterization of tissues: neutron activation analysis and voltammetry.

The National Biomonitoring Specimen Bank at the National Institute of Standards and Technology applies a variety of techniques for extensive characterization of banked samples. To determine a large number of trace elements in small samples at low levels, instrumental neutron activation analysis has been combined with voltammetry. The two methods produce high quality data for thirty pollutant and biological trace elements. Results on archived specimens of human livers and intercomparisons of the two methods are reported.

Biological specimen banking in Arctic research: an Alaska perspective.

The cryogenic archival of biological specimens for retrospective analysis is of significant value for present and future research on population genetics, pathology, systematics, toxicology and environmental monitoring. This realization is emphasized by the increasing support of this activity by various government agencies, institutions and international groups. The international Arctic community is no exception. Canada has been conducting such activities in association with environmental monitoring programs for many years. Similar efforts appear to be underway in other polar nations. From the perspective of the United States Arctic, the Alaska Marine Mammal Tissue Archival Project (AMMTAP) was the earliest organized effort to develop an environmental specimen bank specifically designed for longterm archival of biological specimens under cryogenic conditions. The AMMTAP emphasizes use of standardized rigorous sampling and archival protocols, procedures that minimize contamination of samples during collection and maintaining a detailed record of sample history. The development of this specimen bank, recent activities of this project and other cryogenic specimen banks being developed in Alaska are described.

Neutron activation analysis of biological samples with a preirradiation chemical separation.

A preirradiation separation procedure has been developed to separate Al, Cu, Mn, and V from biological materials. Chelex-100 resin is used as the separation medium, and the resin is irradiated directly. Three NIST biological Standard Reference Materials and five samples of human blood serum, obtained under carefully controlled conditions, have been analyzed by NAA following this separation.

Alaskan marine mammal tissue archival project.

A project to establish an archive of Alaskan marine mammal tissues was conceived in 1987 to be a part of the National Biomonitoring Specimen Bank (NBSB). Protocols and field collection of marine mammals, long-term storage, and analysis are summarized in this paper. Instrumental neutron activation analysis has been used for an initial evaluation of trace element content in samples of northern fur seal (Callorhinus ursinus) from the Pribilof Islands. The findings agree with previously observed trace element levels in northern fur seals. The archived specimens can be used in future studies when comparison of past and present pollution levels are needed.

Instrumental neutron activation analysis of Standard Reference Material 1941, Organics in Marine Sediment. Element content and homogeneity.

The National Institute of Standards and Technology has developed a new Standard Reference Material 1941, "Organics in Marine Sediment." In addition to the organic constituents, over 30 elements have been determined by instrumental neutron activation analysis and prompt-gamma activation analysis. The homogeneity of the material was investigated and relative standard deviations of single-element concentrations in 250-mg samples were found to be 1% or less with regard to major inorganic constituents and rare earth elements. A slightly higher relative SD was found for elements that may stem from biological or anthropogenic input. The element concentrations determined in this work are discussed in comparison to concentrations in other similar reference materials. Concentrations for 31 elements will be included for information on the certificate.

The use of Compton suppression spectrometers for trace element studies in biological materials.

A straightforward method for demonstrating the powerful background reduction of Compton suppression spectrometers for neutron activation purposes is presented. The shorter acquisition time needed in Anti-Compton mode (A/C on) for peaks of appropriate counting statistics, compared to normal gamma counting (A/C off), allows a much higher sample throughput, thus compensating for the higher cost of the instrument. Two examples of artificial mixtures of radionuclides demonstrate the drastic time saving for measurement of monoenergetic decaying isotopes. The comparison of results from three different instruments proves the general usefulness of Compton suppression spectrometers for Neutron Activation Analysis of biological samples.

Application of polyacrylamide gel electrophoresis/neutron activation analysis for protein quantification.

A combination of two methods, polyacrylamide gel electrophoresis (PAGE) and neutron activation analysis (NAA), has been applied to solutions containing phosphoproteins for the purpose of protein quantification. The proteins were separated by molecular weight using PAGE, and then the whole gel was activated by neutron bombardment. Densitometric measurements of the developed bands from 32P, taken from autoradiographs of the activated gels, resulted in quantification of the phosphorus, and then the related protein. This PAGE/NAA method was applied to several phosphoprotein-containing materials, including commercial milk products and reference materials, i.e., IAEA A-11, milk powder, and SRM 1845, Cholesterol in Egg Powder.

Preparation of a mixed human diet material for the determination of nutrient elements, selected toxic elements and organic nutrients: a preliminary report.

Using 201 foods from the United States Food and Drug Administration's Total Diet Study (FDA TDS), a mixed diet composite (USDIET-I) was prepared to represent the intake of 25-30-year-old males in the United States. Proximate analyses, phytate determination, and assays for nutrient elements and selected toxic elements, as well as organic nutrients were carried out on this composite. As part of a quality control exercise for a coordinated research program, atomic absorption spectrophotometry, inductively coupled atomic emission spectrometry, colorimetry and neutron activation analysis were used to determine up to 30 elements in this diet material. A comparison of the daily intakes of As, Ca, Cd, Cu, Fe, Hg, K, Mg, Mn, Na, P, Se and Zn from the composite USDIET-I shows excellent to good agreement with FDA TDS values calculated from results of single food analyses. These USDIET-I results demonstrate the feasibility of the mixed diet concept as a viable approach for a reliable assessment of daily intakes, especially for a number of elements such as Cd, Cr, Hg and Mo that occur at low concentrations in individual food products. Simultaneously, stability of some organic nutrients during storage was also investigated. Initial findings suggest that this program may also be useful in the development of reference materials for organic nutrients, for which there is a great need. These aspects are discussed.

Chronic cadmium intoxication: tissue response in an occupationally exposed patient.

This case report describes the natural history of chronic cadmium intoxication in a woman who was exposed to excessive cadmium in her occupation. We document the clinical, laboratory, and tissue response to the toxicant.