Automated source of squeezed vacuum states driven by finite state machine based software.

In the last few decades, much effort has been made for the production of squeezed vacuum states in order to reduce quantum noise in the audio-frequency band. This technique has been implemented in all running gravitational-wave interferometric detectors and helped to improve their sensitivity. While the detectors are acquiring data for astrophysical observations, they must be kept in the operating condition, also called "science mode," that is, a state that requires the highest possible duty-cycle for all the instrumental parts and controls. We report the development of a highly automated setup for the generation of optical squeezed states, where all the required control loops are supervised by a software based on finite state machines; we took special care to grant ease of use, stability of operation, and possibility of auto-recovery. Moreover, the setup has been designed to be compatible with the existing software and hardware infrastructure of the Virgo detector. In this paper, we discuss the optical properties of this squeezing setup, the locking techniques, and the automation algorithms.

Nonequilibrium steady-state fluctuations in actively cooled resonators.

We analyze heat and work fluctuations in the gravitational wave detector AURIGA, modeled as a macroscopic electromechanical oscillator in contact with a thermostat and cooled by an active feedback system. The oscillator is driven to a steady state by the feedback cooling, equivalent to a viscous force. The experimentally measured fluctuations are in agreement with our theoretical analysis based on a stochastically driven Langevin system. The asymmetry of the fluctuations of the absorbed heat characterizes the oscillator's nonequilibrium steady state and reveals the extent to which a feedback cooled system departs from equilibrium in a statistical mechanics perspective.

Feedback cooling of the normal modes of a massive electromechanical system to submillikelvin temperature.

We apply a feedback cooling technique to simultaneously cool the three electromechanical normal modes of the ton-scale resonant-bar gravitational wave detector AURIGA. The measuring system is based on a dc superconducting quantum interference device (SQUID) amplifier, and the feedback cooling is applied electronically to the input circuit of the SQUID. Starting from a bath temperature of 4.2 K, we achieve a minimum temperature of 0.17 mK for the coolest normal mode. The same technique, implemented in a dedicated experiment at subkelvin bath temperature and with a quantum limited SQUID, could allow to approach the quantum ground state of a kilogram-scale mechanical resonator.

Loss budget of a setup for measuring mechanical dissipations of silicon wafers between 300 and 4 K.

A setup for measuring mechanical losses of silicon wafers has been fully characterized from room temperature to 4 K in the frequency range between 300 Hz and 4 kHz: it consists of silicon wafers with nodal suspension and capacitive and optical vibration sensors. Major contributions to mechanical losses are investigated and compared with experimental data scanning the full temperature range; in particular, losses due to the thermoelastic effect and to the wafer clamp are modeled via finite element method analysis; surface losses and gas damping are also estimated. The reproducibility of the measurements of total losses is also discussed and the setup capabilities for measuring additive losses contributed by thin films deposited on the wafers or bonding layers. For instance, assuming that additive losses are due to an 80-nm-thick wafer bond layer with Young modulus about ten times smaller than that of silicon, we achieve a sensitivity to bond losses at the level of 5x10(-3) at 4 K and at about 2 kHz.

Upper limits on gravitational-wave emission in association with the 27 Dec 2004 giant flare of SGR1806-20.

At the time when the giant flare of SGR1806-20 occurred, the AURIGA "bar" gravitational-wave (GW) detector was on the air with a noise performance close to stationary Gaussian. This allows us to set relevant upper limits, at a number of frequencies in the vicinities of 900 Hz, on the amplitude of the damped GW wave trains, which, according to current models, could have been emitted, due to the excitation of normal modes of the star associated with the peak in x-ray luminosity.

Wideband dual sphere detector of gravitational waves.

We present the concept of a sensitive and broadband resonant mass gravitational wave detector. A massive sphere is suspended inside a second hollow one. Short, high-finesse Fabry-Perot optical cavities read out the differential displacements of the two spheres as their quadrupole modes are excited. At cryogenic temperatures, one approaches the standard quantum limit for broadband operation with reasonable choices for the cavity finesses and the intracavity light power. A molybdenum detector, of overall size of 2 m, would reach spectral strain sensitivities of 2x10(-23) Hz(-1/2) between 1000 and 3000 Hz.