Probe the Dynamic Adsorption and Phase Transition of Underpotential Deposition Processes at Electrode-Electrolyte Interfaces.

Electrochemical scanning tunneling microscopy (EC-STM) and electrochemical quartz crystal microbalance (E-QCM) techniques in combination with DFT calculations have been applied to reveal the static phase and the phase transition of copper underpotential deposition (UPD) on a gold electrode surface. EC-STM demonstrated, for the first time, the direct visualization of the disintegration of (√3 × âˆš3)R30° copper UPD adlayer with coadsorbed SO42- while changing sample potential (ES) toward the redox Pa2/Pc2 peaks, which are associated with the phase transition between the Cu UPD (√3 × âˆš3)R30° phase II and disordered randomly adsorbed phase III. DFT calculations show that SO42- binds via three oxygens to the bridge sites of the copper with sulfate being located directly above the copper vacancy in the (√3 × âˆš3)R30° adlayer, whereas the remaining oxygen of the sulfate points away from the surface. E-QCM measurement of the change of the electric charge due to Cu UPD Faradaic processes, the change of the interfacial mass due to the adsorption and desorption of Cu(II) and SO42-, and the formation and stripping of UPD copper on the gold surface provide complementary information that validates the EC-STM and DFT results. This work demonstrated the advantage of using complementary in situ experimental techniques (E-QCM and EC-STM) combined with simulations to obtain an accurate and complete picture of the dynamic interfacial adsorption and UPD processes at the electrode/electrolyte interface.

Crystalline silica particle functionalized by PEG for its collision-enhanced detection at ultramicroelectrode.

Detecting individual particulate matter is highly significant in many areas, such as mine safety, environment, and human health. The analytical method based on single entity electrochemistry (SEE) has shown great potential in detecting, counting, and measuring individual particles, especially conductive metals or carbon particles, based on their unique charge transfer reactions at an ultramicroelectrode (UME). In this study, we report an innovative SEE method for improving the sensitivity of the detection of electrochemical inert crystalline silica particles by functionalizing silica particles with polyethylene glycol (PEG) molecules. The PEG surface functionalization of the silica was characterized by Fourier-transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) techniques. The morphology of silica particles was characterized by a scanning electron microscope (SEM), and a transmission electron microscope (TEM) was employed to calibrate size distribution and determine the elemental composition of silica particles. The surface charges of silica particles were measured by dynamic light scattering techniques. The collision behaviors of crystalline silica particles with UME were investigated by cyclic voltammetric experiments, which are rarely reported in the literature. The crystalline silica particles were detected based on electrochemically blocking the flux of the redox mediator at the surface of UME, which showed significant signal amplification in the proposed method. Our method was demonstrated for detecting crystalline silica functionalized with or without PEG, acquiring the limit of quantification (LOQ) values of 0.391 µM (23.45 µg/L) and 0.824 µM (49.45 µg/L), respectively, which confirmed that a more than two times improvement in LOQ could be achieved over the PEG functionalized silica particles. We further presented a theoretical model using finite element simulations with COMSOL Multiphysics. We deduced a quantitative relation between the distribution of the current step size and the size distribution of silica particles. Therefore, the reported method here provides a paradigm for SEE-based detection of electrochemically inert crystalline silica particles, which extends the previous report substantially concerning particle detection.

Nitrogen-Doped 4H Silicon Carbide Single-Crystal Electrode for Selective Electrochemical Sensing of Dopamine.

In this work, we designed, fabricated, and characterized the first nitrogen (N)-doped single-crystalline 4H silicon carbide (4H-SiC) electrode for sensing the neurotransmitter dopamine. This N-doped 4H-SiC electrode showed good selectivity for redox reactions of dopamine in comparison with uric acid (UA), ascorbic acid (AA), and common cationic ([Ru(NH3)6]3+), anionic ([Fe(CN)6]3-), and organic (methylene blue) redox molecules. The mechanisms of this unique selectivity are rationalized by the unique negative Si valency and adsorption properties of the analytes on the N-doped 4H-SiC surface. Quantitative electrochemical detection of dopamine by the 4H-SiC electrode was achieved in the linear range from 50 nM to 10 µM with a detection limit of 0.05 µM and a sensitivity of 3.2 nA.µM-1 in a pH = 7.4 phosphate buffer solution. In addition, the N-doped 4H-SiC electrode demonstrated excellent electrochemical stability. This work forms the foundation for developing 4H-SiC as the next-generation robust and biocompatible neurointerface material for a broad range of applications such as the in vivo sensing of neurotransmitters.

Single-Frequency Impedance Studies on an Ionic Liquid-Based Miniaturized Electrochemical Sensor toward Continuous Low-Temperature CO2 Monitoring.

Continuous greenhouse gas monitoring at sub-zero temperatures is needed for monitoring greenhouse gas emission in cold environments such as the Arctic tundra. This work reports a single-frequency electrochemical impedance sensing (SF-EIS) method for real-time continuous monitoring of carbon dioxide (CO2) at a wide range of temperatures (-15 to 40 °C) by using robust ionic liquid (IL) sensing materials and noninvasive, low-power, and low-cost impedance readout mechanisms since they cause minimal changes in the sensing interface, avoiding the baseline change for long-term continuous sensing. In addition, a miniaturized planar electrochemical sensor was fabricated that incorporates a hydrophobic 1-butyl-1-methylpyrrolidinium bis(trifluromethylsulfonyl)imide ([Bmpy][NTf2]) IL electrolyte and Pt black electrode materials. The high viscosity of the ILs facilitates the formation of thin, ordered, and concentrated layers of ionic charges, and the inverse relationship of IL viscosity with temperature makes them especially suited for impedance sensing at low temperatures. The unique low-temperature properties of ILs together with EIS transduction mechanisms are shown to be sensitive and selective for continuously monitoring CO2 at a -15 to 40 °C temperature range via impedance changes at a specifically selected frequency at the open circuit potential (OCP). Molecular dynamics simulations revealed insights into the structure and dynamics of the IL at varying temperatures in the presence of methane and CO2 and provided potential explanations for the observed sensing results. The miniaturized and flexible planar electrochemical sensor with the [Bmpy][NTf2] electrolyte was tested repeatedly at subzero temperatures over a 58-day period, during which good stability and repeatability were obtained. The CO2 impedance sensor was further tested for sensing CO2 from soil samples and shows promising results for their use in real-time monitoring of greenhouse gas emissions in cold temperatures such as permafrost soils.

Soil Sensors and Plant Wearables for Smart and Precision Agriculture.

Soil sensors and plant wearables play a critical role in smart and precision agriculture via monitoring real-time physical and chemical signals in the soil, such as temperature, moisture, pH, and pollutants and providing key information to optimize crop growth circumstances, fight against biotic and abiotic stresses, and enhance crop yields. Herein, the recent advances of the important soil sensors in agricultural applications, including temperature sensors, moisture sensors, organic matter compounds sensors, pH sensors, insect/pest sensors, and soil pollutant sensors are reviewed. Major sensing technologies, designs, performance, and pros and cons of each sensor category are highlighted. Emerging technologies such as plant wearables and wireless sensor networks are also discussed in terms of their applications in precision agriculture. The research directions and challenges of soil sensors and intelligent agriculture are finally presented.

4-Hydroxy-2-nonenal, a lipid peroxidation product, as a biomarker in diabetes and its complications: challenges and opportunities.

Over 30 million Americans are diagnosed with diabetes and this number is only expected to increase. There are various causes that induce complications with diabetes, including oxidative stress. In oxidative stress, lipid peroxidation-derived reactive carbonyl species such as 4-hydroxy-2-nonenal (4-HNE) is shown to cause damage in organs that leads to diabetic complications. We provided evidence to show that 4-HNE or/and 4-HNE-protein adducts are elevated in various organ systems of diabetic patients and animal models. We then discussed the advantages and disadvantages of different methodologies used for the detection of 4-HNE in diabetic tissues. We also discussed how novel approaches such as electrochemistry and nanotechnology can be used for monitoring 4-HNE levels in biological systems in real-time. Thus, this review enlightens the involvement of 4-HNE in the pathogenesis of diabetes and its complications and efficient methods to identify it. Furthermore, the article presents that 4-HNE can be developed as a biomarker for end-organ damage in diabetes such as diabetic cardiac complications.

Time-Resolved Selective Electrochemical Sensing of Carbon Particles.

This work demonstrated a new method for electrochemical detection of carbon black particles based on impact electrochemistry that was capable of selective detection of carbon black from the insulating oxide particles. We systematically studied the electrochemical collision events with carbon black particle suspension solution (pH 7.0 phosphate buffer) at varying carbon black concentrations using a convective condition and a gold microelectrode. We evaluated the effect of bias potential on the number and magnitude of collision spikes by changing the applied potential in chronoamperometry experiments. Our results showed that the biased potential of +0.4 V was the most suitable potential among the tested potential biases. Current blips were observed in the amperometric i-t response, and the spike numbers scaled linearly with the concentration of carbon black particles in the range of 2.5-20 µM (i.e., mass/volume concentration of 0.03 to 0.24 mg L-1) with the lowest detection limit of 0.396 µM (i.e., mass/volume concentration of 0.00475 mg L-1). The selective detection of carbon particles in the presence of representative poorly conductive oxide particles in our experimental conditions was achieved. The sensing mechanism of the sensitive and selective detection of carbon black particles is proposed. This work provides the basis for the development of powerful electroanalytical methods and technologies for the detection and classification of carbon particles in varying environmental conditions such as coalmines, engineered carbon particle factories, and coal power plants.

Electrochemistry at Bimetallic Pd/Au Thin Film Surfaces for Selective Detection of Reactive Oxygen Species and Reactive Nitrogen Species.

In this work, we designed and fabricated Pd/Au bimetallic thin film electrodes with isolated Pd nanoparticles via underpotential deposition of copper on a gold substrate followed by in situ redox replace reaction in a Pd salt solution. The Pd/Au electrode was characterized by AFM and XPS as well as multiple electrochemical techniques including CV and electrochemical quartz crystal microbalance (EQCM) in sulfuric acid and phosphate buffer electrolytes. Results show that the reduction reactions of the analytes (i.e., H2O2 and 3-nitrotyrosine (3-NT)) at the Pd/Au thin film surfaces affect the nature and reactivity of Pd/Au surface electrochemistry including the adsorbed/absorbed hydrogen and/or the premonolayer palladium oxide redox processes at Pd. The EQCM experiment supports the arrangement of small size Pd nanoparticles in the Pd thin film in the presence of gold exhibits unusual properties, acting as a new physicochemical dimension between the electrode and target H2O2 and 3-NT molecules. The Pd/Au thin film was demonstrated as an extremely sensitive and selective probe for detection of common ROS and RNS (i.e., H2O2 and 3-NT). The integration of two different metallic species, Pd and Au, into a surface structure on nanoscale by exploiting their unique surface electrochemistry establishes an innovative analytical method for highly sensitive and selective detection of H2O2 and 3-NT simultaneously. This method has a general scope for detecting a broad range of redox active and nonredox active species simultaneously, which opens up new opportunities to develop new electrocatalytic materials and innovative sensing approaches.

Adsorption and Electrochemistry of Carbon Monoxide at the Ionic Liquid-Pt Interface.

In this work, CO adsorption and oxidation processes were studied with cyclic voltammetry and anodic adsorptive stripping chronoamperometry in two structural different ionic liquids (ILs) (i.e., 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide [Bmpy][NTf2] and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Bmim][NTf2]). Multiple redox processes were observed in the ILs. During the anodic oxidation processes, the NTf2- anion is oxidized to form NTf2• radical and CO is oxidized to CO2 and produces a proton in these ILs when a trace amount of water is present. The products of oxidation processes (NTf2• radical and proton) can be reduced at cathodic processes. Results show that the cation in these ILs can facilitate the formation of an electrolyte-electrode interface structure that influences the amount of CO adsorbed as well as the subsequent CO oxidation current and charge. By selecting the anodic and cathodic potentials, we developed an innovative electroanalytical method for CO sensing based on a simple double-potential adsorptive stripping chronoamperometry. The method allows calibration of the concurrent NTf2- anion and CO redox processes as well as the double-layer charging and discharging processes in the IL with the presence of a trace amount of water providing quantitative analysis of CO concentration with high accuracy and sensitivity. The reported method is the first work to show that quantitative CO detection can be achieved in the presence of complex dynamic interfacial processes in the ILs. The trace water present in the ILs is beneficial for CO oxidation, but a large amount of water is detrimental for the CO oxidation in ambient condition.

Labeled and non-label electrochemical peptide inhibitor-based biosensing platform for determination of hemopexin domain of matrix metalloproteinase-14.

Two labeled and non-label electrochemical peptide-based biosensors for highly sensitive and selective determination of hemopexin domain of matrix metalloproteinase-14 (PEX-14) were reported for the first time. Herein, the thiolated PEX-14 binding peptide inhibitor (ISC) or the ISC-tagged with ferrocene carboxylic acid (CIS-Fc) was self-assembled on the surface of gold electrode tested for binding with PEX-14 by non-label electrochemical impedance spectroscopy or labeled electrochemical (L-EC) transducers. The two biosensors were compared for the analytical performance of the detection of PEX-14 with detection limit of 0.3 pg mL-1 (for L-EC biosensor) and 0.03 ng mL-1 (for EIS biosensor). This work demonstrates that probing the PEX of MMPs represents a novel approach to assess MMPs-mediated cancer dissemination and provide a platform for screening the inhibitors of Matrix metalloproteinases.

Monoclonal Antibody Capture and Analysis Using Porous Membranes Containing Immobilized Peptide Mimotopes.

Rapid, convenient methods for monoclonal antibody (mAb) isolation are critical for determining the concentrations of therapeutic mAbs in human serum. This work uses porous nylon membranes modified with a HER2 peptide mimotope, KGSGSGSQLGPYELWELSH (KH19), for rapid affinity capture of Herceptin, a mAb used to treat breast cancer. Covalent linking of KH19 to poly(acrylic acid)-containing films in porous nylon leads to a Herceptin-binding capacity of 10 mg per mL of membrane and allows selective Herceptin capture from diluted (1:3) human serum in 5 min. Liquid chromatography-mass spectrometry demonstrates the high purity of eluted Herceptin. Moreover, the fluorescence intensity of the protein eluted from membranes increases linearly with the amount of Herceptin spiked in loading solutions containing diluted (1:3) human serum. These results demonstrate the promise of mimotope-modified membranes for Herceptin analysis that does not require secondary antibodies or derivatization with fluorescent labels. Thus, mimotope-containing membranes may form part of a simple benchtop analysis system for assessing the concentrations of therapeutic mAbs.

Continuous amperometric hydrogen gas sensing in ionic liquids.

We report an innovative amperometric hydrogen sensor that addresses current primary issues (i.e. signal drift, low selectivity and speed) in continuous and real-time gas sensing. Utilizing the unique properties and redox reactions of hydrogen in the ionic liquids (ILs), 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide [Bmpy][NTf2] and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Bmim][NTf2], we demonstrate the real-time and continuous sensing of hydrogen with high sensitivity, selectivity and repeatability in both anaerobic and aerobic conditions using simple constant potential amperometry. The varying adsorption of hydrogen at the IL-electrode interface in different ILs is shown to allow tuning of the sensitivity of the sensor. Taking advantage of oxygen in ambient conditions, we demonstrate that the unique chemical reaction of the analyte with the oxygen enables selective quantification of hydrogen in an ambient environment. A sensor calibration based on a kinetics analysis (i.e. the change of the rate of current signal (ΔI/Δt1/2)) rather than an equilibrium analysis was demonstrated to allow fast and quantitative analysis of hydrogen concentration. The ionic liquid hydrogen sensor exhibits high sensitivity, selectivity, speed, accuracy, repeatability and stability. Together with the miniaturization and affordability of amperometric sensor readout electronics, the IL-based electrochemical gas sensor is expected to enable area-wide sensing instead of point measurements for environmental, health and occupational safety applications.

Toward continuous amperometric gas sensing in ionic liquids: rationalization of signal drift nature and calibration methods.

Sensor signal drift is the key issue for the reliability of continuous gas sensors. In this paper, we characterized the sensing signal drift of an amperometric ionic liquid (IL)-based oxygen sensor to identify the key chemical parameters that contribute to the signal drift. The signal drifts due to the sensing reactions of the analyte oxygen at the electrode/electrolyte interface at a fixed potential and the mass transport of the reactant and product at the electrode/electrolyte interface were systematically studied. Results show that the analyte concentration variation and the platinum electrode surface activity are major factors contributing to sensing signal drift. An amperometric method with a double potential step incorporating a conditioning step was tested and demonstrated to be useful in reducing the sensing signal drift and extending the sensor operation lifetime. Also, a mathematic method was tested to calibrate the baseline drift and sensing signal sensitivity change for continuous sensing. This study provides the understanding of the chemical processes that contribute to the IL electrochemical gas (IL-EG) sensor signal stability and demonstrates some effective strategies for signal drift calibration that can increase the reliability of the continuous amperometric sensing. Graphical Abstract ᅟ.

Characterization of the Ionic Liquid/Electrode Interfacial Relaxation Processes Under Potential Polarization for Ionic Liquid Amperometric Gas Sensor Method Development.

Electrochemical amperometric sensors require a constant or varying potential at the working electrode that drives redox reactions of the analyte for detection. The interfacial redox reaction(s) can result in the formation of new chemical products that could change the initial condition of the electrode/electrolyte interface. If the products are not inert and/or cannot be removed from the system such that the initial condition of the electrode/electrolyte interface cannot be restored, the sensor signal baseline would consequently drift, which is problematic for the continuous and real-time sensors. By setting the electrode potential with the periodical ON-OFF mode, electrolysis can be forestalled during the off mode which can minimize the sensor signal baseline drift and reduce the power consumption of the sensor. However, it is known that the relaxation of the structure in the electrical double layer at the ionic liquid/electrode interface to the steps of the electrode potential is slow. This work characterized the electrode/electrolyte interfacial relaxation process of an ionic liquid based electrochemical gas (IL-EG) sensor by performing multiple potential step experiments in which the potential is stepped from an open circuit potential (OCP) to the amperometric sensing potential at various frequencies with different time periods. Our results showed that by shortening the sensing period as well as extending the idle period (i.e., enlarge the ratio of idle period versus sensing period) of the potential step experiments, the electrode/electrolyte interface is prone to relax to its original state, and thus reduces the baseline drift. Additionally, the high viscosity of the ionic liquids is beneficial for electrochemical regeneration via the implementation of a conditioning step at zero volts at the electrode/electrolyte. By setting the working electrode at zero volts instead of OCP, our results showed that it could further minimize the baseline drift, enhance the sensing signal stability, and extend the functioning lifetime of a continuous IL-EG oxygen sensor.

A Redox Conjugated Polymer-Based All-Solid-State Reference Electrode.

This work reports the design, synthesis, and characterization of a novel redox-active conjugated polyaniline containing quinone moiety as a solid state reference electrode. The union of electro-active quinone with π-conjugated polyaniline was created by the first chemical synthesis of para-dimethoxybenzene-functionalized aniline as a monomer using a palladium-mediated coupling. The successful polymerization of the as-prepared monomer was accomplished without acid additives. Its post-polymerization modification with strong Lewis acid boron tribromide furnished unique poly (aniline quinone/hydroquinone) with desired properties for all-solid-state reference electrode (RE) applications. The electrochemical responses from the conjugated polyaniline backbone in this unique polymer have been "suppressed" by the quinone pendant. The resulting poly (aniline quinone) showed a quasi-reversible redox process from the redox behavior of the pendant quinone. The stable electrode potential of this poly (aniline quinone/hydroquinone) suggested that it was a single phase in which the amounts of totally reduced and totally oxidized species could be maintained at a constant in various solvents and electrolytes. Its electrochemical stability was excellent with 95% peak current retention after continuous cyclic voltammetric testing. The aniline and quinone moieties in poly (aniline quinone/hydroquinone) render it to have both hydrophilic and hydrophobic compatibility. It showed excellent behavior as a reference electrode in aqueous and non-aqueous media and can be used in both non-zero current and zero-current conditions, providing a stable potential with a maximum potential drift of ~4.7 mV over ten consecutive days.

Miniaturized Planar Room Temperature Ionic Liquid Electrochemical Gas Sensor for Rapid Multiple Gas Pollutants Monitoring.

The growing impact of airborne pollutants and explosive gases on human health and occupational safety has escalated the demand of sensors to monitor hazardous gases. This paper presents a new miniaturized planar electrochemical gas sensor for rapid measurement of multiple gaseous hazards. The gas sensor features a porous polytetrafluoroethylene substrate that enables fast gas diffusion and room temperature ionic liquid as the electrolyte. Metal sputtering was utilized for platinum electrodes fabrication to enhance adhesion between the electrodes and the substrate. Together with carefully selected electrochemical methods, the miniaturized gas sensor is capable of measuring multiple gases including oxygen, methane, ozone and sulfur dioxide that are important to human health and safety. Compared to its manually-assembled Clark-cell predecessor, this sensor provides better sensitivity, linearity and repeatability, as validated for oxygen monitoring. With solid performance, fast response and miniaturized size, this sensor is promising for deployment in wearable devices for real-time point-of-exposure gas pollutant monitoring.

Hydrogen Electrooxidation in Ionic Liquids Catalyzed by the NTf2 Radical.

Hydrogen electrooxidation via a "hydrogen abstraction" mechanism in an aprotic ionic liquid 1-butyl-1-methylpyrrolidinium bis-(trifluoromethylsulfonyl) [Bmpy][NTf2] under anaerobic conditions was investigated using cyclic voltammetry and density functional theory (DFT). It is found that a platinum bound NTf2 radical (NTf2•) formed by the oxidation of NTf2- at anodic potential can catalyze the oxidation of hydrogen and enhance its reaction rate. Both experimental and theoretical studies (DFT) have supported a mechanism involving a NTf2• radical intermediate that catalyzes the hydrogen redox processes.

Investigation into the ring-substituted polyanilines and their application for the detection and adsorption of sulfur dioxide.

It has been demonstrated in this study that the substituents on the monomer aniline benzene ring are able to introduce the significant differences to the resulting polyaniline's collective properties. We systematically evaluated the structural perturbation effects of two substituents (methyl and methoxy) of aniline monomer through the electrochemical method. Our results showed that the methoxy group induces the less structural perturbation than the methyl counterpart, because of its partial double bond restriction. The morphologies are different for the polyaniline and the ring-substituted polyanilines, in which substituted polyanilines feature the larger porosities with the addition of these side groups. The influential effects of the methoxy side group have been further illustrated and amplified by its superior sensing performance towards the environmentally-significant sulfur dioxide gas, evaluated through the construction of the quartz crystal microbalance (QCM)-based gas sensor with these polyaniline materials. The as-constructed gas sensor's sensitivity, selectivity and stability in terms of its SO2 responses have been evaluated in details. The methoxy-substituted polyaniline was tested to show the unique gas sensing properties for the sulfur dioxide at the low concentrations (50-250 ppm) and function as the adsorbing material at the high concentrations (500-1250 ppm). Thus it can be used both as sensing material as well as a novel filter and/or storage reservoir for the removal of sulfur dioxide pollutant from the environments.

Acoustofluidic bacteria separation.

Bacterial separation from human blood samples can help with the identification of pathogenic bacteria for sepsis diagnosis. In this work, we report an acoustofluidic device for label-free bacterial separation from human blood samples. In particular, we exploit the acoustic radiation force generated from a tilted-angle standing surface acoustic wave (taSSAW) field to separate E. coli from human blood cells based on their size difference. Flow cytometry analysis of the E. coli separated from red blood cells (RBCs) shows a purity of more than 96%. Moreover, the label-free electrochemical detection of the separated E. coli displays reduced non-specific signals due to the removal of blood cells. Our acoustofluidic bacterial separation platform has advantages such as label-free separation, high biocompatibility, flexibility, low cost, miniaturization, automation, and ease of in-line integration. The platform can be incorporated with an on-chip sensor to realize a point-of-care (POC) sepsis diagnostic device.

Monitoring the Cellular Binding Events with Quartz Crystal Microbalance (QCM) Biosensors.

Quartz crystal microbalance (QCM) biosensors have been demonstrated as noninvasive and label-free tools for cell based measurements. However, the complexity of biofilms composed of cells with the associated liquid environments is preventive towards forming explicit relationship between the added mass and the change in the frequency output signal. Therefore, the protocols of interface design (surface chemistry, interaction mechanism, and data acquisition), data interpretation, and device fabrication, all need to be finely refined in order to make these biosensors prevail in real life. Especially in the sense of deriving correct inferences from binding events, the fluidic effects (mostly visible in the form of damping resistance of QCM) should be quantitatively excluded from binding measurements. Such strategies can then track even the cellular interactions which are the basis of many physiological functions of life and can be built into smart functional devices for point of care diagnostics. This chapter provides technical details regarding these strategies with a focus on experimental details and procedures of the measurements of anti CD-20 antibody (Rituximab) interactions with B-Lymphoma cancer cells using the QCM method. In addition to a detailed description of specific interactions, we provide mechanisms of data interpretation and device development having potential application to other techniques.