Isolated Ni Atoms Enable Near-Unity CH4 Selectivity for Photothermal CO2 Hydrogenation.

Photothermal hydrogenation of carbon dioxide (CO2) into value-added products is an ideal solution for addressing the energy crisis and mitigating CO2 emissions. However, achieving high product selectivity remains challenging due to the simultaneous occurrence of numerous competing intermediate reactions during CO2 hydrogenation. We present a novel approach featuring isolated single-atom nickel (Ni) anchored onto indium oxide (In2O3) nanocrystals, serving as an effective photothermal catalyst for CO2 hydrogenation into methane (CH4) with a remarkable near-unity (∼99%) selectivity. Experiments and theoretical simulations have confirmed that isolated Ni sites on the In2O3 surface can effectively stabilize the intermediate products of the CO2 hydrogenation reaction and reduce the transition state energy barrier, thereby changing the reaction path to achieve ultrahigh selective methanation. This study provides comprehensive insights into the design of single-atom catalysts for the highly selective photothermal catalytic hydrogenation of CO2 to methane.

Microglia-mediated pericytes migration and fibroblast transition via S1P/S1P3/YAP signaling pathway after spinal cord injury.

Platelet-derived growth factor receptor ß positive (PDGFRß+) pericytes detach from the microvascular wall and migrate into the injury center following spinal cord injury (SCI), which has been widely regarded as the main source of fibrotic scar, but the mechanism of migration and fibroblast transition remains elusive. Here we show the associated spatiotemporal distribution between microglia and pericytes at three and seven days post-injury (dpi). The increased expression of Sphingosine kinase-1 (SPHK1) in microglia significantly raised the concentration of Sphingosine-1-phosphate (S1P) in the spinal cord, which promotes migration and fibroblast transition of pericyte. In vitro experiments, we found the elevated Sphingosine 1-phosphate receptor 3 (S1P3), the S1P/S1PR3 axis inhibited the phosphorylation of YAP and promoted its nuclear translocation, which contributed to the formation of alpha-smooth muscle actin (α-SMA) and collagen type I (COL1) protein, This process can be blocked by an S1P3 specific inhibitor TY52156 in vitro. The S1P/S1P3/YAP pathway might be a potential target for treatment in SCI.

Sephin1 enhances integrated stress response and autophagy to alleviate myocardial ischemia-reperfusion injury in mice.

OBJECTIVE: Integrated stress response (ISR) is activated to promote cell survival by maintaining the phosphorylation of eukaryotic translation initiation factor 2 (eIF2α). We investigated whether Sephin1 enhances ISR and attenuates myocardial ischemia-reperfusion (MIR) injury. METHODS: Male C57BL/6 J mice were injected with Sephin1 (2 mg/kg,i.p.) 30 min before surgery to establish a model of MIR with 45 min ischemia and 180 min reperfusion. In vitro, the H9C2 cell line with hypoxia-reoxygenation (H/R) was used to simulate MIR. Myocardial injury was evaluated by echocardiography, histologic observation after staining with TTC and H&E and electron microscopy. ISR, autophagy and apoptosis in vivo and in vitro were evaluated by immunoblotting, immunohistochemistry, immunofluorescence, and flow cytometry, respectively. Global protein synthesis was determined using a non-radioactive SUnSET Assay based on the puromycin method. Autophinib, an autophagy-specific inhibitor, was used to investigate the correlation between autophagy and apoptosis in the presence of Sephin1. RESULTS: In vivo, Sephin1 significantly reduced myocardial injury and improved the cardiac function in MIR mice. Sephin1 administration prolonged ISR, reduced cell apoptosis, and promoted autophagy. In vitro, Sephin1 increased the number of stress granules (SGs) and autophagic vesicles, enhanced ISR and related protein synthesis suppression, and reduced cell apoptosis. Autophinib partly reversed autophagosome formation and apoptosis in H9c2 cells. CONCLUSIONS: Sephin1 enhances ISR and related protein synthesis suppression, ameliorates myocardial apoptosis, and promotes autophagy during MIR stress. Sephin1 could act as a noval ISR enhancer for managing acute myocardial ischemia disease.

Intrathecal Anesthesia Prevents Ventricular Arrhythmias in Rats with Myocardial Ischemia/Reperfusion.

INTRODUCTION: Ventricular arrhythmia is commonly provoked by acute cardiac ischemia through sympathetic exaggeration and is often resistant to anti-arrhythmic therapies. Thoracic epidural anesthesia has been reported to terminate fatal ventricular arrhythmia; however, its underlying mechanism is unknown. METHODS: Rats were randomly divided into four groups: sham, sham plus bupivacaine, ischemia/reperfusion (IR), and IR plus bupivacaine groups. Bupivacaine (1 mg/mL, 0.05 mL/100 g body weight) was injected intrathecally into the L5-L6 intervertebral space prior to establishing a myocardial IR rat model. Thereafter, cardiac arrhythmia, cardiac function, myocardial injury, and electrical activities of the heart and spinal cord were evaluated. RESULTS: Intrathecal bupivacaine inhibited spinal neural activity, improved heart rate variability, reduced ventricular arrhythmia score, and ameliorated cardiac dysfunction in IR rats. Furthermore, intrathecal bupivacaine attenuated cardiac injury and myocardial apoptosis and regulated cardiomyocyte autophagy and connexin-43 distribution during myocardial IR. CONCLUSION: Our results indicate that intrathecal bupivacaine blunts spinal neural activity to prevent cardiac arrhythmia and dysfunction induced by IR and that this anti-arrhythmic activity may be associated with regulation of autonomic balance, myocardial apoptosis and autophagy, and cardiac gap junction function.

Strategies for high-temperature methyl iodide capture in azolate-based metal-organic frameworks.

Efficiently capturing radioactive methyl iodide (CH3I), present at low concentrations in the high-temperature off-gas of nuclear facilities, poses a significant challenge. Here we present two strategies for CH3I adsorption at elevated temperatures using a unified azolate-based metal-organic framework, MFU-4l. The primary strategy leverages counter anions in MFU-4l as nucleophiles, engaging in metathesis reactions with CH3I. The results uncover a direct positive correlation between CH3I breakthrough uptakes and the nucleophilicity of the counter anions. Notably, the optimal variant featuring SCN- as the counter anion achieves a CH3I capacity of 0.41 g g-1 at 150 °C under 0.01 bar, surpassing all previously reported adsorbents evaluated under identical conditions. Moreover, this capacity can be easily restored through ion exchange. The secondary strategy incorporates coordinatively unsaturated Cu(I) sites into MFU-4l, enabling non-dissociative chemisorption for CH3I at 150 °C. This modified adsorbent outperforms traditional materials and can be regenerated with polar organic solvents. Beyond achieving a high CH3I adsorption capacity, our study offers profound insights into CH3I capture strategies viable for practically relevant high-temperature scenarios.

Glutathione S-transferase activity facilitates rice tolerance to the barnyard grass root exudate DIMBOA.

BACKGROUND: In paddy fields, the noxious weed barnyard grass secretes 2,4-dihydroxy-7-methoxy-2H-1,4-benzoxazin-3(4H)-one (DIMBOA) to interfere with rice growth. Rice is unable to synthesize DIMBOA. Rice cultivars with high or low levels of allelopathy may respond differently to DIMBOA. RESULTS: In this study, we found that low concentrations of DIMBOA (≤ 0.06 mM) promoted seedling growth in allelopathic rice PI312777, while DIMBOA (≤ 0.08 mM) had no significant influence on the nonallelopathic rice Lemont. DIMBOA treatment caused changes in the expression of a large number of glutathione S-transferase (GST) proteins, which resulting in enrichment of the glutathione metabolic pathway. This pathway facilitates plant detoxification of heterologous substances. The basal levels of GST activity in Lemont were significantly higher than those in PI312777, while GST activity in PI312777 was slightly induced by increasing DIMBOA concentrations. Overexpression of GST genes (Os09g0367700 and Os01g0949800) in these two cultivars enhanced rice resistance to DIMBOA. CONCLUSIONS: Taken together, our results indicated that different rice accessions with different levels of allelopathy have variable tolerance to DIMBOA. Lemont had higher GST activity, which helped it tolerate DIMBOA, while PI312777 had lower GST activity that was more inducible. The enhancement of GST expression facilitates rice tolerance to DIMBOA toxins from barnyard grass root exudates.

Exploring Preclinical Experiments with Different Fat Types for Autologous Fat Grafting.

BACKGROUND: Autologous fat transplantation has been a cornerstone of tissue regeneration for decades. However, there is no standardized selection system or criteria for fat graft selection, often relying heavily on the surgeon's experience. OBJECTIVES: This study aimed to investigate various types of fat derivatives, both in vitro and in vivo at the same condition. METHODS: We collected traditional fat granules of different sizes and SVF-gel, evaluating the viability of ADSCs isolated from them and their performance after grafting into mice. RESULTS: Large fat granules exhibited more complete adipocyte structures, and the isolated ADSCs demonstrated superior differentiation, proliferation, and secretion capacities. They also showed excellent volume retention after 12 weeks. In contrast, ADSCs isolated from SVF-gel displayed lower vitality. However, grafts from SVF-gel exhibited the highest volume maintenance rate among the four groups after 12 weeks, closely resembling normal adipose tissue and displaying significant vascularization. Compared to large fat granule and SVF-gel group, medium and small fat granule grafts exhibited lower volume retention and less angiogenesis. CONCLUSIONS: Through preclinical studies, the flexible clinical use of different fat grafts can be tailored to their unique characteristics. LEVEL OF EVIDENCE I: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Oxygen-Activated Boron Nitride for Selective Photocatalytic Coupling of Methanol to Ethylene Glycol.

The controllable photocatalytic C-C coupling of methanol to produce ethylene glycol (EG) is a highly desirable but challenging objective for replacing the current energy-intensive thermocatalytic process. Here, we develop a metal-free porous boron nitride catalyst that demonstrates exceptional selectivity in the photocatalytic production of EG from methanol under mild conditions. Comprehensive experiments and calculations are conducted to thoroughly investigate the reaction mechanism, revealing that the OB3 unit in the porous BN plays a critical role in the preferential activation of C-H bond in methanol to form ⋅CH2OH via a concerted proton-electron transfer mechanism. More prominent energy barriers are observed for the further dehydrogenation of the ⋅CH2OH intermediate on the OB3 unit, inhibiting the formation of some other by-products during the catalytic process. Additionally, a small downhill energy barrier for the coupling of ⋅CH2OH in the OB3 unit promotes the selective generation of EG. This study provides valuable insights into the underlying mechanisms and can serve as a guide for the design and optimization of photocatalysts for efficient and selective EG production under mild conditions.

Boosted hydrogen evolution kinetics of heteroatom-doped carbons with isolated Zn as an accelerant.

Carbon-based single-atom catalysts, a promising candidate in electrocatalysis, offer insights into electron-donating effects of metal center on adjacent atoms. Herein, we present a practical strategy to rationally design a model catalyst with a single zinc (Zn) atom coordinated with nitrogen and sulfur atoms in a multilevel carbon matrix. The Zn site exhibits an atomic interface configuration of ZnN4S1, where Zn's electron injection effect enables thermal-neutral hydrogen adsorption on neighboring atoms, pushing the activity boundaries of carbon electrocatalysts toward electrochemical hydrogen evolution to an unprecedented level. Experimental and theoretical analyses confirm the low-barrier Volmer-Tafel mechanism of proton reduction, while the multishell hollow structures facilitate the hydrogen evolution even at high current intensities. This work provides insights for understanding the actual active species during hydrogen evolution reaction and paves the way for designing high-performance electrocatalysts.

Electronic Perturbation of Isolated Fe Coordination Structure for Enhanced Nitrogen Fixation.

Modulation of the local electronic structure of isolated coordination structures plays a critical role in electrocatalysis yet remains a grand challenge. Herein, we have achieved electron perturbation for the isolated iron coordination structure via tuning the iron spin state from a high spin state (FeN4) to a medium state (FeN2B2). The transition of spin polarization facilitates electron penetration into the antibonding π orbitals of nitrogen and effectively activates nitrogen molecules, thereby achieving an ammonia yield of 115 µg h-1 mg-1cat. and a Faradaic efficiency of 24.8%. In situ spectroscopic studies and theoretical calculations indicate that boron coordinate sites, as electron acceptors, can regulate the adsorption energy of NxHy intermediates on the Fe center. FeN2B2 sites favor the NNH* intermediate formation and reduce the energy barrier of rate-determining steps, thus accounting for excellent nitrogen fixation performance. Our strategy provides an effective approach for designing efficient electrocatalysts via precise electronic perturbation.

Modulating Charge Separation of Oxygen-Doped Boron Nitride with Isolated Co Atoms for Enhancing CO2 -to-CO Photoreduction.

To alleviate the greenhouse effect and address the related energy crisis, solar-driven reduction of carbon dioxide (CO2 ) to value-added products is considered as a sustainable strategy. However, the insufficient separation and rapid recombination of photogenerated charge carriers during photocatalysis greatly limit their reduction efficiency and practical application potential. Here, isolated Cobalt (Co) atoms are successfully decorated into oxygen-doped boron nitride (BN) via an in situ pyrolysis method, achieving greatly improved catalytic activity and selectivity to the carbon monoxide (CO) product. X-ray absorption fine spectroscopy demonstrates that the isolated Co atoms are stabilized by the O and N atoms with an unsaturated CoO2 N1 configuration. Further experimental investigation and theoretical simulations confirm that the decorated Co atoms not only work as the real active center during the CO2 reduction process, but also perform as the electron pump to promote the electron/hole separation and transfer, resulting in greatly accelerated reaction kinetics and improved activity. In addition, the CoO2 N1 coordination geometry is favorable to the conversion from *CO2 to *COOH, which shall be considered as a selectivity-determining step for the evolution of the CO products. The surface modulation strategy at the atomic level opens a new avenue for regulating the reaction kinetics for photocatalytic CO2 reduction.

Correlating Structural Disorder in Metal (Oxy)hydroxides and Catalytic Activity in Electrocatalytic Oxygen Evolution.

Understanding the correlation between the structural evolution of electrocatalysts and their catalytic activity is both essential and challenging. In this study, we investigate this correlation in the context of the oxygen evolution reaction (OER) by examining the influence of structural disorder during and after dynamic structural evolution on the OER activity of Fe-Ni (oxy)hydroxide catalysts using operando X-ray absorption spectroscopy, alongside other experiments and theoretical calculations. The Debye-Waller factors obtained from extended X-ray absorption fine structure analyses reflect the degree of structural disorder and exhibit a robust correlation with the intrinsic OER activities of the electrocatalysts. The enhanced OER activity of in situ-generated metal (oxy)hydroxides derived from different pre-catalysts is linked to increased structural disorder, offering a promising approach for designing efficient OER electrocatalysts. This strategy may inspire similar investigations in related electrocatalytic energy-conversion systems.

Chinese Ultrasound Doctors Association Guideline on Operational Standards for 2-D Shear Wave Elastography Examination of Musculoskeletal Tissues.

The Ultrasound Physician Branch of the Chinese Medical Doctor Association sought to develop evidence-based recommendations on the operational standards for 2-D shear wave elastography examination of musculoskeletal tissues. A consensus panel of 22 Chinese musculoskeletal ultrasound experts reviewed current scientific evidence and proposed a set of 12 recommendations for 13 key issues, including instruments, operating methods, influencing factors and image interpretation. A final consensus was reached through discussion and voting. On the basis of research evidence and expert opinions, the strength of recommendation for each proposition was assessed using a visual analog scale, while further emphasizing the best available evidence during the question-and-answer session. These expert consensus guidelines encourage facilitation of the standardization of clinical practices for collecting and reporting shear wave elastography data.

Stabilizing electron-rich Ni single-atoms on black phosphorus nanosheets boosts photocatalytic carbon dioxide reduction.

The development of unique single-atom catalysts with electron-rich feature is essential to promoting the photocatalytic CO2 reduction, yet remains a big challenge. Here, a conceptionally new single-atom catalyst constructed from atomically dispersed Ni-P3 species on black phosphorus (BP) nanosheets (BP-Ni) is synthesized for realizing highly efficient visible-light-driven CO2 reduction when trapping photogenerated electrons from homogeneous light absorbers in the presence of triethanolamine as the sacrificial agent. Both the experimental and theoretical calculation data reveal that the Ni-P3 species on BP nanosheets own the electron-rich feature that can improve the photogenerated charge separation efficiency and lower the activation barrier of CO2 conversion. This unique feature makes BP-Ni exhibit the much higher activity as cocatalyst in the photocatalytic CO2 reduction than BP nanosheets. The BP-Ni can also be applied as a cocatalyst for enhanced photocatalytic CO2 reduction after combining with CdSe/S colloidal crystal photocatalyst. The present study offers valuable inspirations for the design and construction of effective catalytic sites toward photocatalytic CO2 reduction reactions.

Hydroxyl-Bonded Ru on Metallic TiN Surface Catalyzing CO2 Reduction with H2O by Infrared Light.

Synchronized conversion of CO2 and H2O into hydrocarbons and oxygen via infrared-ignited photocatalysis remains a challenge. Herein, the hydroxyl-coordinated single-site Ru is anchored precisely on the metallic TiN surface by a NaBH4/NaOH reforming method to construct an infrared-responsive HO-Ru/TiN photocatalyst. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (ac-HAADF-STEM) and X-ray absorption spectroscopy (XAS) confirm the atomic distribution of the Ru species. XAS and density functional theory (DFT) calculations unveil the formation of surface HO-RuN5-Ti Lewis pair sites, which achieves efficient CO2 polarization/activation via dual coordination with the C and O atoms of CO2 on HO-Ru/TiN. Also, implanting the Ru species on the TiN surface powerfully boosts the separation and transfer of photoinduced charges. Under infrared irradiation, the HO-Ru/TiN catalyst shows a superior CO2-to-CO transformation activity coupled with H2O oxidation to release O2, and the CO2 reduction rate can further be promoted by about 3-fold under simulated sunlight. With the key reaction intermediates determined by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and predicted by DFT simulations, a possible photoredox mechanism of the CO2 reduction system is proposed.

Bioinspired Polyoxo-titanium Cluster for Greatly Enhanced Solar-Driven CO2 Reduction.

Developing artificial enzymes with excellent catalytic activities and uncovering the structural and chemical determinants remain a grand challenge. Discrete titanium-oxo clusters with well-defined coordination environments at the atomic level can mimic the pivotal catalytic center of natural enzymes and optimize the charge-transfer kinetics. Herein, we report the precise structural tailoring of a self-assembled tetrahedral Ti4Mn3-cluster for photocatalytic CO2 reduction and realize the selective evolution of CO over specific sites. Experiments and theoretical simulation demonstrate that the high catalytic performance of the Ti4Mn3-cluster should be related to the synergy between active Mn sites and the surrounding functional microenvironment. The reduced energy barrier of the CO2 photoreduction reaction and moderate adsorption strength of CO* are beneficial for the high selective evolution of CO. This work provides a molecular scale accurate structural model to give insight into artificial enzyme for CO2 photoreduction.

Complete mitochondrial genome of Parasa sinica: New insights into the phylogeny of Limacodidae.

In this study, the whole mitochondrial genome (mitogenome) of Parasa sinica was sequenced. It contains 15,306 base pairs (bp), 13 protein-coding genes (PCGs), two ribosomal RNAs (rRNAs), 22 transfer RNAs (tRNAs), and one non-coding regulatory area (CR), all of which are shared by other lepidopterans. It follows the same gene order as ordinary lepidopterans. Further, out of these 37 genes, 23 are present on the heavy strand whereas the remaining 14 are located on the light strand. The A + T composition of the mitogenome is relatively high. Although P. sinica has a negative AT-skew and GC-skew, the GC-skew value is significantly lower than the AT-skew value. All PCGs, with the exception of CO1, carry the same start codon (ATN). All tRNAs exhibit the usual cloverleaf secondary structure. We identified the conserved motif "ATAGA + poly-T″ found in other lepidopteran insects at the beginning of the CR. We collected the concatenated PCGs sequences in the mitochondrial genome of 15 species of Zygaenoidea, with the sequences of Geometridae as outgroups, including P. sinica, and constructed phylogenetic trees using Bayesian inference (BI) and maximum likelihood (ML) methods. The monolineage of each superfamily is usually well supported. Based on phylogenetic analysis, P. sinica is a member of family Limacodidae, strongly supporting the monophyly of the Zygaenoidea groups.

The analyses of the complete mitochondrial genomes of three crabs revealed novel gene rearrangements and phylogenetic relationships of Brachyura.

BACKGROUND: Brachyura crab is the largest branch of Decapoda crustacean. Phylogenetic relationships within Brachyura remain controversial to be investigated. The mitochondrial genome (mitogenome) is an important molecular marker for studying the phylogenetic relationships of Brachyura. METHODS AND RESULTS: To understand the phylogeny of Brachyura, the three complete mitogenomes from Charybdis annulata, Leptodius exaratus, and Spider crab were sequenced and annotated. Their full length was 15,747, 15,716, and 16,608 bp long, respectively. The first two crabs both contained 13 protein-coding genes (PCGs), two rRNA genes, 22 tRNA genes and a control region. However, Spider crab contained 13 PCGs, two rRNA genes, 25 tRNA genes and a control region. The mitogenomes of each of the three crabs exhibited high AT content (67.8%, 69.1%, and 70.8%), with negative AT skews (-0.014, - 0.028, and - 0.017) and GC skews (-0.269, - 0.286, and - 0.341). The gene order of C. annulata was identical to the ancestor of Brachyura. Compared with the ancestor of Brachyura, L. exaratus exhibited the gene rearrangements of Val (V)-rrnS-control region, and Spider crab had the four copies of Lys (K). Phylogenetic analyses indicated that C. annulata belonged to Portunidae family, Portunoidea superfamilies, L. exaratus belonged to Xanthidae family, Xanthoidea superfamilies, and Spider crab belonged to Mithracidae family, Majoidea superfamilies. Phylogenetic analyses showed that the two species (Somanniathelphusa boyangensis and Huananpotamon lichuanense) belonging to the Potamoidea were sister groups to the Thoracotremata, thus supporting the conclusion that Heterotremata is polyphyletic. CONCLUSION: The results of this study enriched the crab mitogenome database and enabled us to better understand the phylogenetic relationships of Brachyura.

Sensitivity analysis of operation parameters of the salt cavern under long-term gas injection-production.

Injection-production operation parameters, the minimum injection gas pressure (IGP: operation pressure), IGP interval, minimum IGP residence time, and injection-production cycle of the underground salt rock gas storage under long-term operation, affect not only the capacity and working ability of a salt cavern but also be crucial to the safety and stability of the surrounding rock. A 3D geo-mechanical model of the salt cavern is established to study the stability of the storage in the operation period. The deformation, expansion safety factor, volume shrinkage, and plastic zone are comprehensively considered for predicting the feasibility and stability of the salt cavern. The stability of the surrounding rock of the cavern with different injection-production parameters and the impact of each parameter on the stability of the cavern during operating are systematically investigated. The results indicate that the displacement, the expansion coefficient of the surrounding rock, and the volume shrinkage rate of the salt cavern reduces significantly with the increment of IGP interval and minimum IGP, while they increases with raising the minimum IGP residence time and injection-production cycle. With the continuous operation of the cavity, the displacement and the volume shrinkage rate enhances significantly year by year with the augment of operation parameters, moreover, their value show a fluctuating upward trend with the alternation of the gas injection and the production. The volume of the plastic zone is enlarged with the increment of the IGP interval, minimum IGP, and injection-production cycle, while it reduces with the extension of the minimum IGP residence time. The variation becomes remarkably with the augment of parameters. The sensitivity coefficients of each injection-production operation parameter are ranked, from large to small, as follows: IGP interval, minimum IGP, minimum IGP residence time, injection-production cycle. The results can offer beneficial reference for effectively optimize the injection-production parameters, so as to provide technical guidance for ensuring the stability of the storage and meeting requirements for the storage capacity.