Comparative and phylogenetic analysis of the complete chloroplast genomes of ten Pittosporum species from East Asia.

Pittosporum (Pittosporaceae) is famous as the ornamental and medical values, which is distributed tropical and subtropical regions of Eastern Hemisphere. The few phylogenetic studies have included samples from the Pacific Island, but the phylogenetic relationships of Asian species has not been studied. Here, the complete chloroplast (cp) genomes of ten Pittosporum species from East Asia were first sequenced and compared with those of the published species of this genus. Our results indicated that cp genomes of these species had a typical and conserved quadripartite structure. 131 genes were identical in order and orientation and no changes of inverted repeat (IR) occurred. However, the comparative analysis of cp genomes suggested that sequence divergence mainly appeared in non-coding or intergenic regions, in which several divergence hotspots were identified. By contrast, protein-coding genes showed the lowest variance under strong purifying selection. Phylogenetic analysis based on the cp genome sequences showed that the tested Pittosporum species were clustered into two major clades, in which the Asian species formed Clade I and the remaining species from Australia and New Zealand formed Clade II with high support values, which was consistent with the results of ITS data with low support values. These results suggested that cp genome is a robust phylogenetic indicator for deep nodes in the phylogeny of Pittosporum. Meanwhile, these results will provide the valuable information to better understand the phylogeny and biogeography of Pittosporum.

Phytochemistry of Red Ginseng, a Steam-Processed Panax ginseng.

Asian ginseng, the root of Panax ginseng C.A. Meyer, occupies a prominent position in the list of best-selling natural products in the world. There are two major types of ginseng roots: white ginseng and red ginseng, each with numerous preparations. White ginseng is prepared by air-drying fresh Asian ginseng roots after harvest. Red ginseng is prepared by steaming roots in controlled conditions using fresh or raw Asian ginseng. Red ginseng is commonly used in Asian countries due to its unique chemical profile, different therapeutic efficacy, and increased stability. Compared with the widespread research on white ginseng, the study of red ginseng is relatively limited. In this paper, after a botanical feature description, the structures of different types of constituents in red ginseng are systematically described, including naturally occurring compounds and those resulting from the steam processing. In red ginseng phytochemical studies, the number of published reports on ginsenosides is significantly higher than that for other constituents. Up to now, 57 ginsenosides have been isolated and characterized in red ginseng. The structural transformation pathways during steaming have been summarized. In comparison with white ginseng, red ginseng also contains other constituents, including polyacetylenes, Maillard reaction products, other types of glycosides, lignans, amino acids, fatty acids, and polysaccharides, which have also been presented. Appropriate analytical methods are necessary for differentiating between unprocessed white ginseng and processed red ginseng. Specific marker compounds and chemical profiles have been used to discriminate red ginseng from white ginseng and adulterated commercial products. Additionally, a brief phytochemical profile comparison has been made between white ginseng and black ginseng, and the latter is another type of processed ginseng prepared from white or red ginseng by steaming several times. In conclusion, to ensure the safe and effective use of red ginseng, phytochemical and analytical studies of its constituents are necessary and even crucial.

Ruthenium-dihydroartemisinin complex: a promising new compound for colon cancer prevention via G1 cell cycle arrest, apoptotic induction, and adaptive immune regulation.

BACKGROUND: Artemisinin (ART) and its derivatives are important antimalaria agents and have received increased attention due to their broad biomedical effects, such as anticancer and anti-inflammation activities. Recently, ruthenium-derived complexes have attracted considerable attention as their anticancer potentials were observed in preclinical and clinical studies. METHODS: To explore an innovative approach in colorectal cancer (CRC) management, we synthesized ruthenium-dihydroartemisinin complex (D-Ru), a novel metal-based artemisinin derivative molecule, and investigated its anticancer, anti-inflammation, and adaptive immune regulatory properties. RESULTS: Compared with its parent compound, ART, D-Ru showed stronger antiproliferative effects on the human CRC cell lines HCT-116 and HT-29. The cancer cell inhibition of D-Ru comprised G1 cell cycle arrest via the downregulation of cyclin A and the induction of apoptosis. ART and D-Ru downregulated the expressions of pro-inflammatory cytokines IL-1ß, IL-6, and IL-8. Although ART and D-Ru did not suppress Treg cell differentiation, they significantly inhibited Th1 and Th17 cell differentiation. CONCLUSIONS: Our results demonstrated that D-Ru, a novel ruthenium complexation of ART, remarkably enhanced its parent compound's anticancer action, while the anti-inflammatory potential was not compromised. The molecular mechanisms of action of D-Ru include inhibition of cancer cell growth via cell cycle arrest, induction of apoptosis, and anti-inflammation via regulation of adaptive immunity.

A Holistic Additive Protocol Steers Dendrite-Free Zn(101) Orientational Electrodeposition.

Orientation guidance has shown its cutting edges in electrodeposition modulation to promote Zn anode stability toward commercialized standards. Nevertheless, large-scale orientational deposition is handicapped by the competition between Zn-ion reduction and mass transfer. Herein, a holistic electrolyte additive protocol is put forward via incorporating bio-derived dextrin molecules into a zinc sulfate electrolyte bath. Electrochemical tests in combination with molecular dynamics simulations demonstrate the alleviation of concentration polarization throughout accelerating Zn2+ diffusion and retarding their reduction. The predominant (101) texture on inert current collectors (i.e., Cu, Ti, and stainless steel) and (101)/(002) textures on Zn foils afford homogeneous electrical field distribution, which is contributed by the work difference to form the 2D nucleus and the adsorption of dextrin molecules, respectively. Consequently, the symmetric cell harvests a longevous cycling lifespan of over 4000 h at 0.5 mA cm-2 /0.5 mAh cm-2 while the Zn@Cu electrode sustains for 240 h at a high depth of discharge of 40%.

Laboratory-adapted and wild-type black soldier flies express differential plasticity in bioconversion and nutrition when reared on urban food waste streams.

BACKGROUND: The black soldier fly (BSF) offers a potential solution to address shortages of feed and food sources; however, selecting effective rearing substrates remains a major hurdle in BSF farming. In an urban area like Singapore, current practice is based on rearing BSF on homogeneous waste streams (e.g., spent brewery grains or okara) because heterogeneous food wastes (e.g., mixed kitchen/canteen waste or surplus cooked food) present several operational challenges with respect to the standardization of development, nutritional content, and harvesting. RESULTS: In this study, we compared two genetic strains of BSF larvae (wild-type and laboratory-adapted line) in a bioconversion experiment with diverse types of food waste (homogeneous/heterogeneous; plant/meat) and we quantified the phenotypic plasticity. Our results demonstrate different plasticity in bioconversion performance, larval growth and larval nutrition between the two BSF lines. This difference may be attributed to the selective breeding the laboratory-adapted line has experienced. Notably, larval lipid content displayed little to no genetic variation for plasticity compared with larval protein and carbohydrate content. Despite variation in larval development, heterogeneous food wastes can produce better performance in bioconversion, larval growth, and larval nutrient content than homogeneous food waste. All-meat diets result in high larvae mortality but larval survival could be rescued by mixing meat with plant-based food wastes. CONCLUSION: Overall, we suggest using mixed meals for BSF larvae feeding. Targeted breeding may be a promising strategy for the BSF industry but it is important to consider the selection effects on plasticity in larval nutrition carefully. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Effects of Curcuminoids and Surfactant-Formulated Curcumin on Chemo-Resistant Colorectal Cancer.

Colorectal cancer (CRC) is a leading cause of cancer-related death in the United States, and chronic gut inflammation is a risk factor for CRC initiation and development. Curcuma longa L., or turmeric, has become one of the most studied herbal medicines in recent years due to its anticancer potentials. It is generally accepted that the major component in turmeric is curcuminoids, and the active constituent in curcuminoids is curcumin. However, unprocessed curcumin is characterized by poor water solubility, which means low bioavailability in humans. To increase the bioavailability of curcumin, in this study, we utilized a novel surfactant-formulated curcumin (CuminUP60[Formula: see text]) and evaluated its CRC chemopreventive activities. Compared with the chemo-sensitive CRC cell line HCT-116, the management of the CRC SW-480 cell line is a challenge, since the latter is chemo-resistant. In other words, these cancer cells resist the effects of the chemotherapy. Using the newly formulated CuminUP60[Formula: see text] water solution, this study demonstrated its strong antiproliferative effects on the SW-480 cells in a dose- and time-dependent manner. This new formulation induced early apoptosis and arrested the cell cycle in the G2/M phase via the upregulation of cyclin B1. We also observed that this new formulation possessed inhibitory effects on Th17 cell differentiation, which regulates the body's immune response against gut malignancies. In summary, our results exhibited a potential clinical utility of the surfactant-formulated curcumin in chemo-resistant colorectal cancer management.

Constructing electrochemical sensor using molecular-imprinted polysaccharide for rapid identification and determination of l-tryptophan in diet.

An imbalance of l-tryptophan (l-Trp), a basic component of a healthy diet, is harmful to human health. Traditional methods for detecting l-Trp have many limitations. To correct a deficiency or excess of l-Trp in human diets, it is necessary to develop a novel method that is rapid, low-cost, and high-sensitivity. Herein, a molecularly imprinted polysaccharide electrochemical sensor termed MIP/CS/MWCNTs/GCE (molecularly imprinted polymer/chitosan/multiwalled carbon nanotubes/glassy carbon electrode) targeting l-Trp was first constructed on a glassy carbon electrode, which was modified with multiwalled carbon nanotubes and chitosan using bifunctional monomers. The MIP/CS/MWCNTs/GCE obtained a wide linear range (1-300 µM) for detecting l-Trp and accurately detected the proportion of l-Trp in mixtures of Trp enantiomers. In milk samples, the spiked recoveries of l-Trp were 86.50 to 99.65%. The MIP/CS/MWCNTs/GCE electrochemical sensor possessed good recognition and detection performance for l-Trp and has promising potential for practical application.

Specific capture and determination of glycoprotein using a hybrid epitopes and monomers-mediated molecular-imprinted polymer enzyme-free electrochemical biosensor.

A novel molecular-imprinted polymer (MIP)-based enzyme-free biosensor was created for the selective detection of glycoprotein transferrin (Trf). For this purpose, MIP-based biosensor for Trf was prepared by electrochemical co-polymerization of novel hybrid monomers 3-aminophenylboronic acid (M-APBA) and pyrrole on a glassy carbon electrode (GCE) modified with carboxylated multi-walled carbon nanotubes (cMWCNTs). Hybrid epitopes of Trf (C-terminal fragment and glycan) have been selected as templates. The produced sensor exhibited great selective recognition ability toward Trf under optimal preparation conditions, offering good analytical range (0.125-1.25 µM) with a detection limit of 0.024 µM. The proposed hybrid epitope in combination with hybrid monomer-mediated imprinting strategy was successfully applied to detect Trf in spiked human serum samples, with recoveries and relative standard deviations ranging from 94.7 to 106.0% and 2.64 to 5.32%, respectively. This study provided a reliable protocol for preparing hybrid epitopes and monomers-mediated MIP for the synergistic and effective determination of glycoprotein in complicated biological samples.

Swelling of Multilayered Calcium Alginate Microspheres for Drug-Loaded Dressing Induced Rapid Lidocaine Release for Better Pain Control.

The development of effective drug-loaded dressings has been considered a hot research topic for biomedical therapeutics, including the use of botanical compounds. For wound healing, adequate dressings can provide a good microenvironment for drug release, such as lidocaine. Biological macromolecular materials such as alginate show excellent properties in wound management. This study involves the preparation and evaluation of biocompatible multilayered-structure microspheres composed of chitosan, porous gelatin, and calcium alginate microspheres. The multilayered structure microspheres were named chitosan@ porous gelatin@ calcium alginate microspheres (CPAMs) and the drugs were rapidly released by the volume expansion of the calcium alginate microspheres. The in vitro release curve revealed that the peak release of lidocaine from CPAMs was reached within 18[Formula: see text]min. After 21[Formula: see text]min, the remaining lidocaine was then slowly released, and the active drug release was converted to a passive drug release phase. The initial release effect of lidocaine was much better than that reported in the published studies. Additionally, blood coagulation experiments showed that CPAMs coagulated blood in 60[Formula: see text]s, and the blood liquidity of the CPAMs group was worse than that of the woundplast group. Therefore, the coagulation characteristics of CPAMs were superior to the commonly used woundplast containing lidocaine healing gel. These study outcomes indicated that the CPAMs acted as fast-release dressings for faster pain control and better coagulation properties.

Artificial Interphase Layer for Stabilized Zn Anodes: Progress and Prospects.

The burgeoning Li-ion battery is regarded as a powerful energy storage system by virtue of its high energy density. However, inescapable issues concerning safety and cost aspects retard its prospect in certain application scenarios. Accordingly, strenuous efforts have been devoted to the development of the emerging aqueous Zn-ion battery (AZIB) as an alternative to inflammable organic batteries. In particular, the instability from the anode side severely impedes the commercialization of AZIB. Constructing an artificial interphase layer (AIL) has been widely employed as an effective strategy to stabilize the Zn anode. This review specializes in the state-of-the-art of AIL design for Zn anode protection, encompassing the preparation methods, mechanism investigations, and device performances based on the classification of functional materials. To begin with, the origins of Zn instability are interpreted from the perspective of electrical field, mass transfer, and nucleation process, followed by a comprehensive summary with respect to functions of AIL and its designing criteria. In the end, current challenges and future outlooks based upon theoretical and experimental considerations are included.

Submillimeter-scale multimaterial terrestrial robots.

Robots with submillimeter dimensions are of interest for applications that range from tools for minimally invasive surgical procedures in clinical medicine to vehicles for manipulating cells/tissues in biology research. The limited classes of structures and materials that can be used in such robots, however, create challenges in achieving desired performance parameters and modes of operation. Here, we introduce approaches in manufacturing and actuation that address these constraints to enable untethered, terrestrial robots with complex, three-dimensional (3D) geometries and heterogeneous material construction. The manufacturing procedure exploits controlled mechanical buckling to create 3D multimaterial structures in layouts that range from arrays of filaments and origami constructs to biomimetic configurations and others. A balance of forces associated with a one-way shape memory alloy and the elastic resilience of an encapsulating shell provides the basis for reversible deformations of these structures. Modes of locomotion and manipulation span from bending, twisting, and expansion upon global heating to linear/curvilinear crawling, walking, turning, and jumping upon laser-induced local thermal actuation. Photonic structures such as retroreflectors and colorimetric sensing materials support simple forms of wireless monitoring and localization. These collective advances in materials, manufacturing, actuation, and sensing add to a growing body of capabilities in this emerging field of technology.

Anti-hepatoma Effect of DC2.4 Cells Transfected with Tumor-Associated Antigen Cdc25C In Vitro.

OBJECTIVE: Cell division cyclin 25 homolog C (Cdc25C) is a tumor-associated antigen candidate gene, and this may be used as an effective target in cancer treatment. The present study aims to evaluate the lysis effect of cytotoxic T lymphocytes (CTLs) induced by dendritic cell line DC2.4 overexpressing Cdc25C, and the feasibility of Cdc25C as a component in hepatoma immunotherapy. METHODS: The mouse Cdc25C gene was ligated into a lentiviral vector, and transfected into DC2.4 cells. The DC2.4 cell phenotype and cytokine secretion were determined by flow cytometry and ELISA, respectively. CD8+ T cells were sorted from the spleens of C57BL/6 mice using a magnetic bead sorting kit obtained from Miltenyi Biotech, Germany, and co-cultured with DC2.4 cells for one week as effector cells. Then, IL-2, granzyme B and perforin were detected in the CTL culture medium by ELISA. Next, time-resolved fluorescence immunoassay was used to detect the immune killing effect of Cdc25C-specific CTLs on target cells. Meanwhile, the effect of blocking MHC-I sites on target cells with a monoclonal anti-MHC-I antibody was evaluated. RESULTS: The results revealed that Cdc25C could be stably overexpressed in DC2.4 cells by LV-Cdc25C infection. DC2.4 cells transfected with LV-Cdc25C secreted more IL-6, IL-12, TNF-α and IFN-γ, and had higher expression levels of CD40, CD86, CCR7 and MHC-II than unaltered DC2.4 cells. The elevated Cdc25C in dendritic cells also further increased the secretion of IL-2, granzyme B and perforin to elicit Cdc25C-specific CTLs, and induced the higher cytotoxicity in Hepa1-6 cell lines (P<0.05), but this had no effect on the target cells when MHC-I monoclonal antibodies were blocked. CONCLUSION: DC2.4 cells transfected with LV-Cdc25C can induce specific CTLs, and result in a strong cellular immune response. The dendritic cells that overexpress Cdc25C may be useful for hepatoma immunotherapy.

An edible molecularly imprinted material prepared by a new environmentally friendly deep eutectic solvent for removing oxalic acid from vegetables and human blood.

A novel deep eutectic solvent-magnetic molecularly imprinted polymer (DES-MMIP) for the specific removal of oxalic acid (OA) was prepared by an environmentally friendly deep eutectic solvent, consisting of betaine, citric acid, and glycerol, which acted as the functional monomer for polymerization. The structure and morphology of DES-MMIPs were studied by X-ray diffraction, scanning and transmission electron microscopy, thermal gravimetric analysis, Fourier transform infrared spectroscopy, and vibrating sample magnetometer. DES-MMIPs had a core-shell structure, with magnetic iron oxide as the core, and showed good thermal stability and high adsorption capacity (18.73 mg/g) for OA. The adsorption process of OA by DES-MMIPs followed the pseudo-second-order kinetic model and Langmuir isotherm model. DES-MMIPs had significant selectivity for OA and their imprinting factor was 3.26. When applied to real samples, high performance liquid chromatography analysis showed that DES-MMIPs could remove OA from both spinach and blood serum. These findings provide potential methods for removal of OA from vegetables and for specific removal of OA in renal dialysis.

Effects of dihydroartemisinin, a metabolite of artemisinin, on colon cancer chemoprevention and adaptive immune regulation.

BACKGROUND: Artemisinin (ART) is an anti-malaria natural compound with a moderate anticancer action. As a metabolite of ART, dihydroartemisinin (DHA) may have stronger anti-colorectal cancer (CRC) bioactivities. However, the effects of DHA and ART on CRC chemoprevention, including adaptive immune regulation, have not been systematically evaluated and compared. METHODS: Coupled with a newly-established HPLC analytical method, enteric microbiome biotransformation was conducted to identify if the DHA is a gut microbial metabolite of ART. The anti-CRC potential of these compounds was compared using two different human CRC cell lines for cell cycle arrest, apoptotic induction, and anti-inflammation activities. Naive CD4+ T cells were also obtained for testing the compounds on the differentiation of Treg, Th1 and Th17. RESULTS: Using compound extraction and analytical methods, we observed for the first time that ART completely converted into its metabolites by gut microbiome within 24 h, but no DHA was detected. Although ART did not obviously influence cancer cell growth in the concentration tested, DHA very significantly inhibited the cancer cell growth at relatively low concentrations. DHA included G2/M cell cycle arrest via upregulation of cyclin A and apoptosis. Both ART and DHA downregulated the pro-inflammatory cytokine expression. The DHA significantly promoted Treg cell proliferation, while both ART and DHA inhibited Th1 and Th17 cell differentiation. CONCLUSIONS: As a metabolite of ART, DHA possessed stronger anti-CRC activities. The DHA significantly inhibited cell growth via cell cycle arrest, apoptosis induction and anti-inflammation actions. The adaptive immune regulation is a related mechanism of actions for the observed effects.

Synergistic recognition of transferrin by using performance dual epitope imprinted polymers.

Transferrin (Trf) is a new type of active drug targeting carrier and disease biomarker that regulates the balance of iron ions in human body. The recognition and isolation of Trf is of great significance for disease diagnosis and treatment. Thus, a new type of magnetic dual affinity epitope molecularly imprinted polymer coated on Fe3O4 nanoparticles (Fe3O4@DEMIP) was successfully prepared for specific recognition of Trf. C-terminal nonapeptide and Trf glycan were selected as bi-epitope templates for metal chelation and boron affinity immobilization, respectively. 4-vinylphenylboric acid (4-VP), N-isopropyl acrylamide (NIPAM) and zinc acrylic were used as functional monomers. Results showed that Fe3O4@DEMIP exhibited excellent specific recognition ability adsorption capacity toward Trf, with an adsorption of 43.96 mg g-1 (RSD = 3.28%) and a more satisfactory imprinting factor (about 6.60) than that of other reported imprinting methods. In addition, Fe3O4@DEMIP displayed pH, temperature and magnetic sensitivity properties to realize temperature and pH-controlled recognition and release of target proteins and magnetic rapid separation. Furthermore, the Fe3O4@DEMIP coupled with high-performance liquid chromatography (HPLC) analysis was successfully used for specific recognition of Trf in biosamples. This study provides a reliable protocol for preparing metal chelation and boron affinity dual affinity bi-epitope molecularly imprinted polymers for synergistic and efficient recognition of biomacromolecules in the complex biological systems.

Evaluating [68Ga]Ga-p14-032 as a Novel PET Tracer for Diagnosis Cerebral Amyloid Angiopathy.

Objective: We aimed to investigate the distribution of [68Ga]Ga-p14-032, a novel PET ligand that binds to vascular amyloid, in patients diagnosed clinically with probable cerebral amyloid angiopathy (CAA) compared with patients with Alzheimer's disease (AD) and normal controls (NC). Methods: This longitudinal cohort study was composed of 10 subjects (three probable CAA patients, two AD patients, five NC subjects), recruited from a clinic in China. CAA patients had a history of lobar intracerebral hemorrhage (ICH) and met modified Boston criteria for probable CAA. All participants were aged at least 55 years and underwent [68Ga] Ga-p14-032 PET/CT or/and PET/MRI, and the Montreal Cognitive Assessment on initial assessment. Demographics were measured at baseline (diabetes, hypertension, hypercholesterolemia, ischemic stroke, and ICH). Two PET imaging experts reviewed the PET images with cortical standardized uptake value ratio (SUVr) displayed on a color scale and visually classified the images as positive or negative. The mean of SUVr was calculated using the pons as reference. Results: In CAA patients, PET scans were positive in regions with higher numbers of CMBs. No significant signal was seen in AD subjects or controls. The relative [68Ga]Ga-p14-032 retention in the cortex was stronger in patients with CAA than AD and NC (median SUVr 2.68 ± 1.53 vs. 1.77 ± 0.08 and 0.83 ± 0.24). Conclusions: Our results provide early evidence that the [68Ga] Ga-p14-032 PET probe binds preferentially to vascular amyloid and may be a useful tracer for diagnosing CAA.

Baseline or 90-day fibrinogen levels and long-term outcomes after ischemic stroke or TIA: Results from the China national stroke registry â ¢.

BACKGROUND AND AIMS: Elevated fibrinogen levels have been observed in patients with acute ischemic stroke, but the association of fibrinogen with stroke outcomes is still undefined. We aimed to assess the association between baseline or 90-day fibrinogen levels and long-term outcomes in patients with ischemic stroke or transient ischemic attack (TIA). METHODS: Using data from the China National Stroke Registry Ⅲ, this substudy included 10 518 patients within 7 days (baseline) of onset and 6268 patients at 90 days of recovery. Multivariate Cox regression and logistic regression analyses were used to assess the associations of fibrinogen with poor functional outcome (modified Rankin Scale score 3-6), dependence (modified Rankin Scale score 3-5), all-cause death, and stroke recurrence at 1 year. RESULTS: Fibrinogen levels at 90 days were higher than those at baseline (443.5 mg/dl versus 393.7 mg/dl; p < 0.001). A high baseline fibrinogen level was associated with poor functional outcome (odds ratio [OR], 1.63; 95% confidence interval [CI], 1.35-1.97) and dependence (OR, 1.68; 95% CI, 1.36-2.09) after adjusting for all confounding risk factors. In contrast, further adjustment for high-sensitivity C-reactive protein attenuated the association between baseline fibrinogen level and all-cause death or stroke recurrence. Furthermore, a high 90-day fibrinogen level was also associated with poor functional outcome (OR, 1.46; 95% CI, 1.07-2.00) and dependence (OR, 1.43; 95% CI, 1.03-1.98) after adjusting for all confounding risk factors. CONCLUSIONS: High baseline and 90-day fibrinogen levels were associated with outcomes in patients with ischemic stroke or TIA.

Complex 3D microfluidic architectures formed by mechanically guided compressive buckling.

Microfluidic technologies have wide-ranging applications in chemical analysis systems, drug delivery platforms, and artificial vascular networks. This latter area is particularly relevant to 3D cell cultures, engineered tissues, and artificial organs, where volumetric capabilities in fluid distribution are essential. Existing schemes for fabricating 3D microfluidic structures are constrained in realizing desired layout designs, producing physiologically relevant microvascular structures, and/or integrating active electronic/optoelectronic/microelectromechanical components for sensing and actuation. This paper presents a guided assembly approach that bypasses these limitations to yield complex 3D microvascular structures from 2D precursors that exploit the full sophistication of 2D fabrication methods. The capabilities extend to feature sizes <5 µm, in extended arrays and with various embedded sensors and actuators, across wide ranges of overall dimensions, in a parallel, high-throughput process. Examples include 3D microvascular networks with sophisticated layouts, deterministically designed and constructed to expand the geometries and operating features of artificial vascular networks.

Photocurable bioresorbable adhesives as functional interfaces between flexible bioelectronic devices and soft biological tissues.

Flexible electronic/optoelectronic systems that can intimately integrate onto the surfaces of vital organ systems have the potential to offer revolutionary diagnostic and therapeutic capabilities relevant to a wide spectrum of diseases and disorders. The critical interfaces between such technologies and living tissues must provide soft mechanical coupling and efficient optical/electrical/chemical exchange. Here, we introduce a functional adhesive bioelectronic-tissue interface material, in the forms of mechanically compliant, electrically conductive, and optically transparent encapsulating coatings, interfacial layers or supporting matrices. These materials strongly bond both to the surfaces of the devices and to those of different internal organs, with stable adhesion for several days to months, in chemistries that can be tailored to bioresorb at controlled rates. Experimental demonstrations in live animal models include device applications that range from battery-free optoelectronic systems for deep-brain optogenetics and subdermal phototherapy to wireless millimetre-scale pacemakers and flexible multielectrode epicardial arrays. These advances have immediate applicability across nearly all types of bioelectronic/optoelectronic system currently used in animal model studies, and they also have the potential for future treatment of life-threatening diseases and disorders in humans.

Vascular Risk Factors, Imaging, and Outcomes in Transient Ischemic Attack/Ischemic Stroke Patients with Neuroimaging Evidence of Probable/Possible Cerebral Amyloid Angiopathy.

BACKGROUND: In TIA/ischemic stroke patients, the clinical significance of lobar microbleeds potentially indicating cerebral amyloid angiopathy (CAA) is unknown. We assessed vascular risk factors and outcomes, including cognition, in TIA/ischemic stroke patients with neuroimaging evidence of probable/possible CAA. METHODS: This prospective cohort was conducted from August 2015 and January 2018 at 40 centers. 2625 participants were collected. Eligible participants were aged at least 55 years. Montreal Cognitive Assessment (MoCA) score is less than or equal to 26. A total of 1620 patients were included. 1604 (99.0%) and 1582 (97.7%) participants are followed up at 3 and 12 months. The primary outcomes were death or disability (mRS score, 3-6) and Montreal Cognitive Assessment (MoCA) at 3 months and 12 months. Demographic and vascular risk factors were measured at baseline (smoking, alcohol, diabetes, atrial fibrillation, hypertension, hypercholesterolemia, coronary artery disease, ischemic stroke, and transient ischemic attack). Blood samples were collected within 24 hours of admission. MRI was recommended for all patients. MoCA score was evaluated at baseline and follow-up. RESULTS: In total, 291/1620 patients with ischemic stroke/TIA (32.7% female and mean age, 67.8 years) had neuroimaging evidence of probable/possible CAA. Higher age, history of hypertension, atrial fibrillation, ischemic stroke, alcohol, and high glucose at the admission were more common in the patients. Mean MoCA changed from 21.4 at 3 months (SD 5.2) to 22.3 at 12 months (SD 4.7), difference 0.3 (SD 3.8). At the 3-month and 12-month follow-up, there were significant differences in age, education level, and sex among different cognitive groups. Higher age, lower education (less than high school), and female sex were the predictors of changing in MoCA score from 3 months to 12 months. Moreover, age (more than 66 years) and education (less than high school) are strongly associated with MoCA at 3- and 12-month follow-up. 30 of 286 (10.5%) and 37 of 281 (13.2%) patients had poor outcome of death or disability (modified Rankin Scale score, 3-6) at follow-up 3 and 12 months. Cortical superficial siderosis (cSS) was associated with higher mRS at follow-up. cSS status, cSS count 1-2, cSS strictly lobar, and strictly deep might be the risks of outcomes in adjusted analyses. CONCLUSION: This study suggested that an increasing number of vascular risk factors and imaging markers were significantly associated with outcomes of TIA/ischemic stroke patients with CAA pattern. Male, young patients with high education should get better cognitive recovery.