Regulating the Topology of Covalent Organic Frameworks for Boosting Overall H2O2 Photogeneration.

Photocatalytic oxygen reduction reactions and water oxidation reactions are extremely promising green approaches for massive H2O2 production. Nonetheless, constructing effective photocatalysts for H2O2 generation is critical and still challenging. Since the network topology has significant impacts on the electronic properties of two dimensional (2D) polymers, herein, for the first time, we regulated the H2O2 photosynthetic activity of 2D covalent organic frameworks (COFs) by topology. Through designing the linking sites of the monomers, we synthesized a pair of novel COFs with similar chemical components on the backbones but distinct topologies. Without sacrificial agents, TBD-COF with cpt topology exhibited superior H2O2 photoproduction performance (6085 and 5448 µmol g-1 h-1 in O2 and air) than TBC-COF with hcb topology through the O2-O2⋅--H2O2, O2-O2⋅--O2 1-H2O2, and H2O-H2O2 three paths. Further experimental and theoretical investigations confirmed that during the H2O2 photosynthetic process, the charge carrier separation efficiency, O2⋅- generation and conversion, and the energy barrier of the rate determination steps in the three channels, related to the formation of *OOH, *O2 1, and *OH, can be well tuned by the topology of COFs. The current study enlightens the fabrication of high-performance photocatalysts for H2O2 production by topological structure modulation.

Design of electromagnetic metasurface using two dimensional crystal nets.

Metasurfaces are of great interest as they exhibit unique electromagnetic properties. Currently, metasurface design focuses on generating new meta-atoms and their combinations. Here a topological database, reticular chemistry structure resource (RCSR), is introduced to bring a new dimension and more possibilities for metasurface design. RCSR has over 200 two-dimensional crystal nets, among which 72 are identified as suitable for metasurface design. Using a simple metallic cross as the metaatom, 72 metasurfaces are constructed from the atom positions and lattice vectors of the crystal nets templates. The transmission curves of all the metasurfaces are calculated using the finite-difference time-domain method. The calculated transmission curves have good diversity, showing that the crystal nets approach is a new engineering dimension for metasurface design. Three clusters are found for the calculated curves using the K-means algorithm and principal component analysis. The structure-property relationship between metasurface topology and transmission curve is investigated, but no simple descriptor has been found, indicating that further work is still needed. The crystal net design approach developed in this work can be extended to three-dimensional design and other types of metamaterials like mechanical materials.

A novel seed cone of Pinus from the Miocene of coastal Southeast China indicates kinship with Southeast Asian pines.

Pinus is an economically and ecologically important genus whose members are dominant components globally in low-latitude mountainous and mid-latitude temperate forests. Pinus species richness is currently concentrated in subtropical mid-low latitudes of the Northern Hemisphere, differing from the latitudinal diversity gradient mostly recognized in woody angiosperms. How the present pattern was developing in Earth's past is still poorly studied, particularly in eastern Asia. Here, a new fossil species, Pinus shengxianica sp. nov. is described based on a fossil seed cone from the Late Miocene Shengxian Formation in Zhejiang, southeast China. A co-occurring cone is recognized as a known fossil species, Pinus speciosa Li. Extensive comparison of extant and fossil members of Pinus suggests P. shengxianica shares a striking cone similarity to Pinus merkusii and Pinus latteri (subsection Pinus) from tropical Southeast Asia in having annular bulges around the umbo on the apophysis. The morphological resemblance indicates these two extant low-latitude pines probably possess a close affinity with the present newly-discovered P. shengxianica and originated from East Asian mid-low latitude ancestors during this generic re-diversification in the Miocene. This scenario is consistent with the evolutionary trajectory reflected by the pine fossil history and molecular data, marking the Miocene as a key period for the origin and evolution of most extant pines globally. The co-occurrences of diverse conifers and broadleaved angiosperms preferring diverse niches demonstrate Late Miocene eastern Zhejiang was one of the hot spots for coniferophyte diversity and hosted a needled-broadleaved mixed forest with complex vegetation structure and an altitudinal zonation.

METTL3-mediated macrophage exosomal NEAT1 contributes to hepatic fibrosis progression through Sp1/TGF-ß1/Smad signaling pathway.

Hepatic fibrosis (HF) is caused by chronic hepatic injury and is characterized by hepatic stellate cells (HSCs) activation. Studies focusing on the function of exosomes derived from macrophages in HF progression are limited. This study aims to identify the roles of exosomal NEAT1 derived from macrophages on HF and the underlying mechanisms. Our studies showed that METTL3 targeted and enhanced NEAT1 expression in macrophages. Exosomal NEAT1 originating from LPS-treated macrophages promoted HSCs proliferation and migration, and induced the expression of fibrotic proteins including collagen I, α-SMA, and fibronectin. Macrophage exosomal NEAT1 contributed to HSCs activation by sponging miR-342. MiR-342 directly targeted Sp1 and suppressed its downstream TGF-ß1/Smad signaling pathway, which eventually led to the inhibition of HSCs activation. Depletion of NEAT1 in the macrophage exosomes inhibited HF progression both in vitro and in vivo. Altogether, our study proved that silence of NEAT1 in the macrophage exosomes exerted protective roles against HF through the miR-342/Sp1/TGF-ß1/Smad signaling pathway, suggesting a potential therapeutic target in HF treatment.

The METTL3/MALAT1/PTBP1/USP8/TAK1 axis promotes pyroptosis and M1 polarization of macrophages and contributes to liver fibrosis.

Pro-inflammatory M1 macrophages, via activating hepatic stellate cells, contribute to liver fibrosis. In this study, we examined the mechanism and the significance of a signaling axis, METTL3/MALAT1/PTBP1/USP8/TAK1, in regulating pyroptosis and M1 polarization of hepatic macrophages. Liver fibrosis model was established in vivo by CCl4 treatment; M1 polarization was induced in vitro by treating macrophages with lipopolysaccharide or interferon γ. Expressions of METTL3, MALAT1, PTBP1, USP8, and TAK1 were measured by RT-PCR and/or Western blot in Kupffer cells (KCs) isolated from in vivo model or in vitro activated macrophages. Macrophage phenotypes including inflammation (RT-qPCR analysis of a panel of proinflammatory cytokines and ELISA on productions of interleukin (IL)-1ß and IL-18) and pyroptosis (Western blot of NLRP3, Caspase-1, and GSDMD) were investigated. The impact of METTL3 on m6A methylation of MALAT1 was examined by methylated RNA immunoprecipitation (RIP), the interaction between PTBP1 and MALAT1 or USP8 mRNA by combining RNA pull-down, RIP, and RNA stability assays, and the crosstalk between USP8 and TAK1 by co-immunoprecipitation and protein degradation assays. Functional significance of individual component of METTL3/MALAT1/PTBP1/USP8/TAK1 axis was assessed by combining gain-of-function and loss-of-function approaches. In KCs isolated from in vivo liver fibrosis model or in vitro M1-polarized macrophages, METTL3 was up-regulated, and sequentially, it increased MALAT1 level via m6A methylation, which promoted USP8 mRNA degradation through the interaction with PTBP1. Reduced USP8 expression regulated the ubiquitination and protein stability of TAK1, which promoted pyroptosis and inflammation of macrophages. The signaling cascade METTL3/MALAT1/PTBP1/USP8/TAK1, by essentially stimulating pyroptosis and inflammation of macrophages, aggravates liver fibrosis. Therefore, targeting individual components of this axis may benefit the treatment of liver fibrosis.

Elevated preoperative platelet-to-lymphocyte ratio predicts poor prognosis of patients with primary gastrointestinal stromal tumor.

BACKGROUND: The neutrophil-to-lymphocyte ratio (NLR) and platelet-to-lymphocyte ratio (PLR) are considered to reflect the systemic inflammatory response and clinical prognosis. However, the independent prognostic values of the NLR and PLR for patients with gastrointestinal stromal tumor (GIST) remain debatable. This study aims to evaluate the prognostic value of preoperative NLR and PLR in GIST patients. METHODS: We retrospectively reviewed all GIST patients diagnosed and surgically treated at Union Hospital between 2005 and 2018. The preoperative NLR and PLR were calculated to evaluate recurrence-free survival (RFS) and overall survival (OS) by Kaplan-Meier analysis. Univariate and multivariate Cox regression analyses were performed to estimate the independent prognostic values. RESULTS: The median follow-up time was 49 months (interquartile range, 22-74 months). The preoperative PLR was significantly increased in the GIST patients with intermediate and high tumor risks. Increases in the NLR (≥2.34) and PLR (≥185.04) were associated with shorter RFS and OS (P < 0.01). Moreover, the multivariate analysis revealed that elevated PLR was an independent factor for shorter RFS (hazard ratio [HR]: 3.041; 95% confidence interval [CI]: 2.001-4.622; P < 0.001) and OS (HR: 1.899; 95% CI: 1.136-3.173; P = 0.014). CONCLUSIONS: The preoperative PLR is a potential biomarker of GIST and is related to the clinical outcome. An elevated preoperative PLR predicts poor prognosis of patients with primary GIST after complete surgical resection.

Alteration in formation behaviors of chloroaromatic precursors of PCDD/Fs: An experimental study on the effect of extrinsic and intrinsic oxygen on chlorination.

Due to the promotion on Cl radical generation by enhanced oxidation, chlorination of hydrocarbon intermediates becomes a potential formation path for chloroaromatic precursors of PCDD/Fs (polychlorinated dibenzo-p-dioxins and dibenzofurans) in both MSW (municipal solid waste) incineration and gasification-combustion processes, in which intrinsic oxygen might have a significant effect on the competition between oxidation and chlorination. Thus, chlorination of benzene and phenol was experimentally studied on a homogeneous flow reaction system. Effects of temperature and ER (equivalence ratio) were assessed, and comparison was carried out to clarify the alteration in formation behaviors of chloroaromatics by extrinsic and intrinsic oxygen. At 600 °C, chlorobenzenes were already largely formed in benzene chlorination, and the addition of extrinsic oxygen barely affected it. On the contrary, with intrinsic oxygen, phenol tended to decompose to light compounds. With rising temperature, oxidation was promoted and extrinsic oxygen strongly inhibited the formation of chloroaromatics in benzene chlorination at 900 °C and higher temperature. For phenol chlorination, chlorobenzenes were still rarely generated. However, high proportions of octachloronaphthalene and octachlorodibenzofuran were observed, due to the enhancement in polymerization by high temperature. When increasing ER, oxidative decomposition was also promoted in both the chlorination of benzene and phenol. Extra extrinsic oxygen led to a further reduction of chloroaromatics during benzene chlorination, and till ER = 1.0 at 1000 °C, comparable performance to intrinsic oxygen could be achieved in the control of chloroaromatics. Based on these results, formation pathways of the major chloroaromatics from chlorination, oxidation and polymerization were summarized, and the roles of extrinsic and intrinsic oxygen in altering their formation behaviors were revealed.

Experimental study on dioxin formation in an MSW gasification-combustion process: An attempt for the simultaneous control of dioxins and nitrogen oxides.

A gasification-combustion conversion process has been proposed for MSW disposal, and the positive effect of "homogeneous conversion" and "staged combustion" on the stabilization of Cl atoms and the rupture of CCl has been proved previously in fundamental experiments. To verify and evaluate their inhibition effect on dioxin generation, a bench-scale experimental system of the proposed process was established in the present work and an experimental study on the formation of dioxins in the process was carried out. Since both dioxins and nitrogen oxides should be strictly controlled while applied in industry, the simultaneous control of nitrogen oxides was also considered. Results indicated that "homogeneous conversion" has a clear inhibition effect on dioxins in both the syngas from gasification and the flue gas from combustion, which is a very important process in the stabilization of Cl atoms and the control of dioxins. During the "staged combustion" of the syngas, the increase of SR1, the rise of temperature and the extension of residence time all have a clear inhibition effect on dioxins in the flue gas. The extension of residence time seems to be more efficient, and while increasing SR1 and temperature, the regeneration of active chlorine species and the increase of NO need to be concerned. By the combination of "homogeneous conversion" with a temperature of 700 °C and "staged combustion" with a SR1/SR2 ratio of 0.7/0.4, a temperature of 900 °C, a residence time of 241 ms, a satisfactory simultaneous control of both dioxins and nitrogen oxides was obtained in the experiments of the present work.

Machine learning material properties from the periodic table using convolutional neural networks.

In recent years, convolutional neural networks (CNNs) have achieved great success in image recognition and shown powerful feature extraction ability. Here we show that CNNs can learn the inner structure and chemical information in the periodic table. Using the periodic table as representation, and full-Heusler compounds in the Open Quantum Materials Database (OQMD) as training and test samples, a multi-task CNN was trained to output the lattice parameter and enthalpy of formation simultaneously. The mean prediction errors were within DFT precision, and the results were much better than those obtained using only Mendeleev numbers or a random-element-positioning table, indicating that the two-dimensional inner structure of the periodic table was learned by the CNN as useful chemical information. Transfer learning was then utilized by fine-tuning the weights previously initialized on the OQMD training set. Using compounds with formula X2YZ in the Inorganic Crystal Structure Database (ICSD) as a second training set, the stability of full-Heusler compounds was predicted by using the fine-tuned CNN, and tungsten containing compounds were identified as rarely reported but potentially stable compounds.

Data-Driven Design of Ecofriendly Thermoelectric High-Entropy Sulfides.

High-entropy compounds with compositional complexity can be designed as new thermoelectric materials. Here a data-driven model was developed, which chose suitable elements to reduce the enthalpy of formation and hence to increase the chance of single phase formation. Using this model, two high-entropy sulfides were designed, metallic Cu5SnMgGeZnS9 and semiconducting Cu3SnMgInZnS7. They were then successfully fabricated as single-phase dense ceramics with homogeneously distributed cations, and their phase stability and atomic local structures were investigated using density functional theory calculations. Finally, a zT value of 0.58 at 773 K was obtained for Cu5Sn1.2MgGeZnS9, where additional Sn was used to tune the carrier concentration. This work provides a simple approach to find new high-entropy functional materials in the largely unexplored multielement chemical space.

Inhibition of CCl formation during the combustion of MSW gasification syngas: An experimental study on the synergism and competition between oxidation and chlorination.

For the safe disposal of MSW, a four-step gasification-combustion conversion process is proposed in this work, consisting of material gasification, ash melting, syngas conversion and combustion. Based on the control method of dioxin in gasification process which has been studied previously, experiments of tar chlorination process under oxidative atmospheres were carried out in a homogeneous flow reaction system, using benzene as the tar model compound, to find a way for the inhibition of CCl formation during the syngas combustion process. Results indicated that Cl2 reacts with benzene more easily than O2 under low temperatures, and has a positive effect on both oxidative cracking and polymerization. For chlorination reactions, high temperature enhances the chlorination degree and leads to the formation of perchlorinated hydrocarbons, but also promotes the rupture of the weak CCl bonds. With the rise of temperature, hexachlorobenzene became the major product, the amounts of all chlorinated hydrocarbons decreased rapidly, and the conversion direction depended on the amount of O2. O2 generally promotes the formation of hydrogen chloride, and inhibits the chlorination of hydrocarbons. At a temperature above 900 °C, the total amount of chlorinated hydrocarbons was very low under oxidative atmospheres, even only with a equivalence ratio of 0.2. However, during the oxidation process under low temperatures, CCl can also be formed on cyclopentadienyl and 1,3-butadienyl radicals, whose chlorination products were observed. The synergistic and competitive effects between oxidation and chlorination are concluded and the major benzene conversion pathways are summarized according to the products detected.

Evaluation of Four Different Restorative Materials for Restoration of the Periodontal Condition of Wedge-Shaped Defect: A Comparative Study.

BACKGROUND This study aimed to conduct a clinical evaluation of four restorative materials for restoration of dental wedge-shaped defect (WSD) and their impacts on periodontal tissues. MATERIAL AND METHODS A total of 280 maxillary premolars with dental WSD were selected from 106 patients; the patient cases were divided into eight groups according to different combinations of restorative materials (flowable resin composites, Dyract compomers, glass ionomer cement (GIC), light-curing composite resin), and WSD positions (approaching gingival and subgingival positions). Gingival crevicular fluid (GCF) volume, levels of aspartate aminotransferase (AST), alkaline phosphatase (ALP), and interleukin-1ß (IL-1ß) in GCF were analyzed, while probing depth (PD), plaque index (PLI), and sulcus bleeding index (SBI) were also measured. The periodontal conditions of all patients were followed prior to restoration, as well as six months and 12 months after restoration. RESULTS After six months of restoration, the overall clinical success rates of flowable resin composites, Dyract compomers, and light-curing composite resin were greater than those of GIC. GCF volume, GCF-AST, IL-1ß levels, PD, PLI, and SBI of cases restored by GIC were higher than those restored by the other three materials. After 12 months of restoration, the overall clinical success rates of flowable resin composites and Dyract compomers were greater than those of light-curing composite resin and GIC. GCF volume, GCF-AST, GCF-ALP, IL-1ß levels, PD, PLI, and SBI of cases restored by GIC were higher than those restored by the other three materials. CONCLUSIONS Our study provided evidence that the clinical efficacy of flowable resin composites, Dyract compomers, and light-curing composite resin was greater than that of GIC for restoration of dental WSD.

Titanium sulphene: two-dimensional confinement of electrons and phonons giving rise to improved thermoelectric performance.

We investigated the thermoelectric properties of titanium sulphene, namely, few-layered TiS(2) nanosheets, by using density functional theory and the Boltzmann transport equations. The Seebeck coefficient of titanium sulphene was found to increase if the thickness fell below 14 triple layers (~8 nm) and for the monolayer becomes 40% larger than that of the bulk TiS(2). This behavior is attributed to an enhancement in the density of states near the conduction band minimum in the monolayer. Moreover, the acoustic phonon band of the monolayer is more flat than that of the bulk, which results in a 37% reduction of the acoustic phonon group velocity and was beneficial for a low lattice thermal conductivity. Therefore, the combined effects from quantum confinement of both electrons and phonons could lead to a significant enhancement in thermoelectric performance in the two-dimensional titanium sulphene.

[Experimental study on the reconstruction of mandibular symphyseal defects by internal tri-focal distractor].

OBJECTIVE: To introduce the internal tri-focal distractor developed by the authors and evaluate its primary application and feasibility in animal experiment. METHODS: Four hybrid dogs were selected and segmental resection at the mandibular symphysis was performed. Two transfer disks, 10 mm in width, were respectively fixed at the two ends of bone defect and the internal tri-focal distractor was installed. The force was applied one week after the operation, with a tractive speed of 0.5 mm/12 h. After 13 - 16 days, the traction was completed when the two transfer disks were combined. The occlusal films were taken at the 1st day, 4th, 8th and 12th week after traction. The animals were killed at the 12th week, samples of the traction area taken and histological examination performed. Finally, the new bone formation was observed. RESULTS: All the animals survived in the experiment, abruption and rust-eaten was not found in distractor. In the 12th week after installation, new bones in traction gap were mature and bony union between the two transfer dishes was accomplished. CONCLUSIONS: The internal tri-focal distractor used in this study may become a potential device in reconstruction of mandibular symphyseal defects.