Advanced cathodes for aqueous Zn batteries beyond Zn2+ intercalation.

Aqueous zinc (Zn) batteries have attracted global attention for energy storage. Despite significant progress in advancing Zn anode materials, there has been little progress in cathodes. The predominant cathodes working with Zn2+/H+ intercalation, however, exhibit drawbacks, including a high Zn2+ diffusion energy barrier, pH fluctuation(s) and limited reproducibility. Beyond Zn2+ intercalation, alternative working principles have been reported that broaden cathode options, including conversion, hybrid, anion insertion and deposition/dissolution. In this review, we report a critical assessment of non-intercalation-type cathode materials in aqueous Zn batteries, and identify strengths and weaknesses of these cathodes in small-scale batteries, together with current strategies to boost material performance. We assess the technical gap(s) in transitioning these cathodes from laboratory-scale research to industrial-scale battery applications. We conclude that S, I2 and Br2 electrodes exhibit practically promising commercial prospects, and future research is directed to optimizing cathodes. Findings will be useful for researchers and manufacturers in advancing cathodes for aqueous Zn batteries beyond Zn2+ intercalation.

Reducing Gases Triggered Cathode Surface Reconstruction for Stable Cathode-Electrolyte Interface in Practical All-Solid-State Lithium Batteries.

The interfacial compatibility between cathodes and sulfide solid-electrolytes (SEs) is a critical limiting factor of electrochemical performance in all-solid-state lithium-ion batteries (ASSLBs). This work presents a gas-solid interface reduction reaction (GSIRR), aiming to mitigate the reactivity of surface oxygen by inducing a surface reconstruction layer (SRL) . The application of a SRL, CoO/Li2 CO3 , onto LiCoO2 (LCO) cathode results in impressive outcomes, including high capacity (149.7 mAh g-1 ), remarkable cyclability (retention of 84.63% over 400 cycles at 0.2 C), outstanding rate capability (86.1 mAh g-1 at 2 C), and exceptional stability in high-loading cathode (28.97 and 23.45 mg cm-2 ) within ASSLBs. Furthermore, the SRL CoO/Li2 CO3 enhances the interfacial stability between LCO and Li10 GeP2 S12 as well as Li3 PS4 SEs. Significantly, the experiments suggest that the GSIRR mechanism can be broadly applied, not only to LCO cathodes but also to LiNi0.8 Co0.1 Mn0.1 O2 cathodes and other reducing gases such as H2 S and CO, indicating its practical universality. This study highlights the significant influence of the surface chemistry of the oxide cathode on interfacial compatibility, and introduces a surface reconstruction strategy based on the GSIRR process as a promising avenue for designing enhanced ASSLBs.

High-Reversibility Sulfur Anode for Advanced Aqueous Battery.

Despite being extensively explored as cathodes in batteries, sulfur (S) can function as a low-potential anode by changing charge carriers in electrolytes. Here, a highly reversible S anode that fully converts from S8 0 to S2- in static aqueous S-I2 batteries by using Na+ as the charge carrier is reported. This S anode exhibits a low potential of -0.5 V (vs standard hydrogen electrode) and a near-to-theoretical capacity of 1404 mA h g-1 . Importantly, it shows significant advantages over the widely used Zn anode in aqueous media by obviating dendrite formation and H2 evolution. To suppress "shuttle effects" faced by both S and I2 electrodes, a scalable sulfonated polysulfone (SPSF) membrane is proposed, which is superior to commercial Nafion in cost (US$1.82 m-2  vs $3500 m-2 ) and environmental benignity. Because of its ultra-high selectivity in blocking polysulfides/iodides, the battery with SPSF displays excellent cycling stability. Even under 100% depth of discharge, the battery demonstrates high capacity retention of 87.6% over 500 cycles, outperforming Zn-I2 batteries with 3.1% capacity under the same conditions. These findings broaden anode options beyond metals for high-energy, low-cost, and fast-chargeable batteries.

Impact of redox fluctuations on microbe-mediated elemental sulfur disproportionation and coupled redox cycling of iron.

Elemental sulfur (S0) plays a vital role in the coupled cycling of sulfur and iron, which in turn affects the transformation of carbon and various pollutants. These processes have been well characterized under static anoxic or oxic conditions, however, how the natural redox fluctuations affect the bio-mediated sulfur cycling and coupled iron cycling remain enigmatic. The present work examined S0 disproportionation as driven by natural microbial communities under fluctuating redox conditions and the contribution of S0 disproportionation to ferrihydrite transformation. Samples were incubated at either neutral or alkaline pH values, applying sequential anaerobic, aerobic and anaerobic conditions over 60 days. Under anaerobic conditions, S0 was found to undergo disproportionation to sulfate and sulfide, which subsequently reduced ferrihydrite at both pH 7.4 and 9.5. Ferrihydrite promoted S0 disproportionation by scavenging biogenic sulfide and maintaining a suitable degree of sulfate formation. After an oxic period, during the subsequent anoxic incubation, bioreduction of sulfate occurred and the biogenic sulfide reduced iron (hydr)oxides at a rate approximately 25 % lower than that observed during the former anoxic period. A 16S rDNA-based microbial community analysis revealed changes in the microbial community in response to the redox fluctuations, implying an intimate association with the coupled cycling of sulfur and iron. Microscopic and spectroscopic analyses confirmed the S0-mediated transformation of ferrihydrite to crystalline iron (hydr)oxide minerals such as lepidocrocite and magnetite and the formation of iron sulfides precipitated under fluctuating redox conditions. Finally, a reaction mechanism based on mass balance was proposed, demonstrating that bio-mediated sulfur transformation maintained a sustainable redox reaction with iron (hydr)oxides under fluctuating anaerobic-aerobic-anaerobic conditions tested in this study. Altogether, the finding of our study is critical for obtaining a more complete understanding of the dynamics of iron redox reactions and pollutant transformation in sulfur-rich aquatic environments.

LiMgPO4 -Coating-Induced Phosphate Shell and Bulk Mg-Doping Enables Stable Ultra-High-Voltage Cycling of LiCoO2 Cathode.

Stable cycling of LiCoO2 (LCO) cathode at high voltage is extremely challenging due to the notable structural instability in deeply delithiated states. Here, using the sol-gel coating method, LCO materials (LMP-LCO) are obtained with bulk Mg-doping and surface LiMgPO4 /Li3 PO4 (LMP/LPO) coating. The experimental results suggest that the simultaneous modification in the bulk and at the surface is demonstrated to be highly effective in improving the high-voltage performance of LCO. LMP-LCO cathodes deliver 149.8 mAh g-1 @4.60 V and 146.1 mAh g-1 @4.65 V after 200 cycles at 1 C. For higher cut-off voltages, 4.70 and 4.80 V, LMP-LCO cathodes still achieve 144.9 mAh g-1 after 150 cycles and 136.8 mAh g-1 after 100 cycles at 1 C, respectively. Bulk Mg-dopants enhance the ionicity of CoO bond by tailoring the band centers of Co 3d and O 2p, promoting stable redox on O2- , and thus enhancing stable cycling at high cut-off voltages. Meanwhile, LMP/LPO surface coating suppresses detrimental surface side reactions while allowing facile Li-ion diffusion. The mechanism of high-voltage cycling stability is investigated by combining experimental characterizations and theoretical calculations. This study proposes a strategy of surface-to-bulk simultaneous modification to achieve superior structural stability at high voltages.

pH-Triggered Molecular Switch Toward Texture-Regulated Zn Anode.

Zn electrodes in aqueous media exhibit an unstable Zn/electrolyte interface due to severe parasitic reactions and dendrite formation. Here, a dynamic Zn interface modulation based on the molecular switch strategy is reported by hiring γ-butyrolactone (GBL) in ZnCl2 /H2 O electrolyte. During Zn plating, the increased interfacial alkalinity triggers molecular switch from GBL to γ-hydroxybutyrate (GHB). GHB strongly anchors on Zn surface via triple Zn-O bonding, leading to suppressive hydrogen evolution and texture-regulated Zn morphology. Upon Zn stripping, the fluctuant pH turns the molecular switch reaction off through the cyclization of GHB to GBL. This dynamic molecular switch strategy enables high Zn reversibility with Coulombic efficiency of 99.8 % and Zn||iodine batteries with high-cyclability under high Zn depth of discharge (50 %). This study demonstrates the importance of dynamic modulation for Zn electrode and realizes the reversible molecular switch strategy to enhance its reversibility.

Cyclohexanedodecol-Assisted Interfacial Engineering for Robust and High-Performance Zinc Metal Anode.

Aqueous zinc-ion batteries (AZIBs) can be one of the most promising electrochemical energy storage devices for being non-flammable, low-cost, and sustainable. However, the challenges of AZIBs, including dendrite growth, hydrogen evolution, corrosion, and passivation of zinc anode during charging and discharging processes, must be overcome to achieve high cycling performance and stability in practical applications. In this work, we utilize a dual-functional organic additive cyclohexanedodecol (CHD) to firstly establish [Zn(H2O)5(CHD)]2+ complex ion in an aqueous Zn electrolyte and secondly build a robust protection layer on the Zn surface to overcome these dilemmas. Systematic experiments and theoretical calculations are carried out to interpret the working mechanism of CHD. At a very low concentration of 0.1 mg mL-1 CHD, long-term reversible Zn plating/stripping could be achieved up to 2200 h at 2 mA cm-2, 1000 h at 5 mA cm-2, and 650 h at 10 mA cm-2 at the fixed capacity of 1 mAh cm-2. When matched with V2O5 cathode, the resultant AZIBs full cell with the CHD-modified electrolyte presents a high capacity of 175 mAh g-1 with the capacity retention of 92% after 2000 cycles under 2 A g-1. Such a performance could enable the commercialization of AZIBs for applications in grid energy storage and industrial energy storage.

Polyiodide Confinement by Starch Enables Shuttle-Free Zn-Iodine Batteries.

Aqueous Zn-iodine (Zn-I2 ) batteries have been regarded as a promising energy-storage system owing to their high energy/power density, safety, and cost-effectiveness. However, the polyiodide shuttling results in serious active mass loss and Zn corrosion, which limits the cycling life of Zn-I2 batteries. Inspired by the chromogenic reaction between starch and iodine, a structure confinement strategy is proposed to suppress polyiodide shuttling in Zn-I2 batteries by hiring starch, due to its unique double-helix structure. In situ Raman spectroscopy demonstrates an I5 - -dominated I- /I2 conversion mechanism when using starch. The I5 - presents a much stronger bonding with starch than I3 - , inhibiting the polyiodide shuttling in Zn-I2 batteries, which is confirmed by in situ ultraviolet-visible spectra. Consequently, a highly reversible Zn-I2 battery with high Coulombic efficiency (≈100% at 0.2 A g-1 ) and ultralong cycling stability (>50 000 cycles) is realized. Simultaneously, the Zn corrosion triggered by polyiodide is effectively inhibited owing to the desirable shuttling-suppression by the starch, as evidenced by X-ray photoelectron spectroscopy analysis. This work provides a new understanding of the failure mechanism of Zn-I2 batteries and proposes a cheap but effective strategy to realize high-cyclability Zn-I2 batteries.

Sulfidation of ferric (hydr)oxides and its implication on contaminants transformation: a review.

Rapid industrialization and urbanization have resulted in elevated concentrations of contaminants in the groundwaters and subsurface soils, posing a growing hazard to humans and ecosystems. The transformation of most contaminants is closely linked to the mineralogy of ferric (hydr)oxides. Sulfidation of ferric (hydr)oxides is one of the most significant biogeochemical reactions in the anoxic environments, causing reductive dissolution and recrystallization of ferric (hydr)oxides and further affecting the transformation of iron-associated contaminants. This paper provides a comprehensive review on the sulfidation process of ferric (hydr)oxides and the transformation of relevant contaminants. This review presents detailed reaction mechanisms between ferric (hydr)oxides and dissolved sulfide, and elucidates the factors (e.g. crystallinity of ferric (hydr)oxides, the ratio of sulfide concentration to the surface area concentration of ferric (hydr)oxides) that control the formation of surface associated Fe(II), iron sulfide minerals, as well as transformation of secondary minerals. Then, we summarized the transformation mechanisms of a variety of typical environmentally relevant contaminants existing in groundwater and subsurface soils, including heavy metals, metal(loid) oxyanions (arsenic, antimony, chromium), radionuclides (uranium, technetium), organic contaminants and phosphate/nitrate species. The general mechanisms of contaminant transformation involve a combination of release, reduction and re-adsorption/incorporation processes, the specific pathway of which is highly dependent on the properties of the contaminant itself and the extent of sulfidation. Moreover, the challenge of extending our knowledge towards in situ remediation, as well as further research needs are identified.

Mechanisms of Upconversion Luminescence of Er3+-Doped NaYF4 via 980 and 1530 nm Excitation.

To date, the mechanisms of Er3+ upconversion luminescence via 980 and 1530 nm excitation have been extensively investigated; however, based on discussions, they either suffer from the lack of convincing evidence or require elaborated and time-consuming numerical simulations. In this work, the steady-state and time-resolved upconversion luminescence data of Er3+-doped NaYF4 were measured; we therefore investigated the upconversion mechanisms of Er3+ on the basis of the spectroscopic observations and the simplified rate equation modeling. This work provides a relatively simple strategy to reveal the UCL mechanisms of Er3+ upon excitation with various wavelengths, which may also be used in other lanthanide ion-doped systems.

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries.

Stable solid electrolyte interface (SEI) is highly sought after for lithium metal batteries (LMB) owing to its efficient electrolyte consumption suppression and Li dendrite growth inhibition. However, current design strategies can hardly endow a multifunctional SEI formation due to the non-uniform, low flexible film formation and limited capability to alter Li nucleation/growth orientation, which results in unconstrained dendrite growth and short cycling stability. Herein, we present a novel strategy to employ electrolyte additives containing catechol and acrylic groups to construct a stable multifunctional SEI by in-situ anionic polymerization. This self-smoothing and robust SEI offers multiple sites for Li adsorption and steric repulsion to constrain nucleation/growth process, leading to homogenized Li nanosphere formation. This isotropic nanosphere offers non-preferred Li growth orientation, rendering uniform Li deposition to achieve a dendrite-free anode. Attributed to these superiorities, a remarkable cycling performance can be obtained, i.e., high current density up to 10 mA cm-2, ultra-long cycle life over 8500 hrs operation, high cumulative capacity over 4.25 Ah cm-2 and stable cycling under 60 °C. A prolonged lifespan can also be achieved in Li-S and Li-LiFePO4 cells under lean electrolyte content, low N/P ratio or high temperature conditions. This facile strategy also promotes the practical application of LMB and enlightens the SEI design in related fields.

Cubic MnS-FeS2 Composites Derived from a Prussian Blue Analogue as Anode Materials for Sodium-Ion Batteries with Long-Term Cycle Stability.

Cubic N,S codoped carbon coating MnS-FeS2 composites (MnS-FeS2@NSC) with a hollow structure were prepared and used as anode materials for sodium-ion batteries. MnS-FeS2@NSC exhibits excellent cycle performance and high rate capability and delivered a reversible capacity of 501.0 mAh g-1 after 800 cycles at a current density of 0.1 A g-1 with a capacity retention of 81%. More importantly, the MnS-FeS2@NSC anode holds long-term cycle stability; the capacity can remain 134.0 mAh g-1 after 14 500 cycles at 4 A g-1. Kinetic analysis demonstrated that Na+ storage follows a pseudocapacitive dominating process, which is ascribed to the origin of the outstanding rate performance of the MnS-FeS2@NSC material. The enhancement of electrochemical performance is attributed to the hollow structure and the N,S codoped carbon coating structure, which can reduce the diffusion distance for sodium ions and electrons, alleviate volume expansion during sodium-ion insertion/extraction, and retain the structural integrity effectively. Furthermore, a two-step sodiation processes with FeS2 sodiation prior to MnS was demonstrated by X-ray diffraction (XRD), and the electrochemical impedance spectroscopy (EIS) spectra might indicate that the accumulation of the metallic elements in the preconversion reaction can accelerate the transfer of electrons and ions in the further conversion process.

Dynamic electrocatalyst with current-driven oxyhydroxide shell for rechargeable zinc-air battery.

Recent fruitful studies on rechargeable zinc-air battery have led to emergence of various bifunctional oxygen electrocatalysts, especially metal-based materials. However, their electrocatalytic configuration and evolution pathway during battery operation are rarely spotlighted. Herein, to depict the underlying behaviors, a concept named dynamic electrocatalyst is proposed. By selecting a bimetal nitride as representation, a current-driven "shell-bulk" configuration is visualized via time-resolved X-ray and electron spectroscopy analyses. A dynamic picture sketching the generation and maturation of nanoscale oxyhydroxide shell is presented, and periodic valence swings of performance-dominant element are observed. Upon maturation, zinc-air battery experiences a near two-fold enlargement in power density to 234 mW cm-2, a gradual narrowing of voltage gap to 0.85 V at 30 mA cm-2, followed by stable cycling for hundreds of hours. The revealed configuration can serve as the basis to construct future blueprints for metal-based electrocatalysts, and push zinc-air battery toward practical application.

Aluminum-Based Metal-Organic Frameworks Derived Al2O3-Loading Mesoporous Carbon as a Host Matrix for Lithium-Metal Anodes.

Li-metal anode attracts great focus owing to its ultra-high specific capacity and the lowest redox potential. However, the uncontrolled growth of Li dendrite leads to severe security issues and limited cycle life. Herein, Al2O3 loading mesoporous carbon (Al2O3@MOF-C) derived from Al-based metal-organic frameworks (Al-MOFs) was investigated as the stable host matrix for Li metal, in which, Al2O3 was served as nano seeds for the Li deposition and decrease the Li nucleation overpotential. Except that, the high specific surface area and wide pore distribution can also buffer the volume changes of Li and fasten electron transfer, hence a dendrite-free morphology was observed even after 50 cycles at 2 mA cm-2. High Li coulombic efficiency of 97.9% after 100 cycles at 1 mA cm-2, 1 mAh cm-2, and 97.6% after 50 cycles at 1 mA cm-2 and 6 mAh cm-2 were performed by Al2O3@MOF-C electrodes. Good performances were also obtained for Li-sulfur and LiFePO4 batteries. The performances of Al2O3@MOF-C@Li were compared with Li foil and Cu@Li in full cell configurations. The electrochemical tests of full cells based on Al2O3@MOF-C@Li indicated that this Al-based functional host matrix can enhance the Li-utilization and lead to significant enhancement of the cycling performance of Li anodes.

Flexible fabrication of micro-optics arrays with high-aspect-ratio by an offset-tool-servo diamond machining system.

Micro-optics arrays (MOAs) with high aspect ratio (AR) have unique advantages in realizing the minimization of optical systems by reducing the focal distance. Fast or slow tool servo (F/STS) is widely regarded as an outperforming technique for the fabrication of MOAs featuring high form accuracy. However, in the machining of MOAs with high AR, the non-smooth cutting trajectory of F/STS inevitably leads to intensive tool vibrations and the interference between the tool flank face and the finished surface, thereby deteriorating surface roughness. In this study, a novel offset-tool-servo (OTS) diamond machining technology and the corresponding toolpath generation algorithm are proposed to achieve the flexible fabrication of micro-freeform lens arrays with high AR. In OTS, with the assistance of four-axis servo motions, a spiral toolpath is generated for each single lenslet, which effectively avoids the tool interference induced by the steep descending movement of the tool in F/STS. Besides, the proposed machining strategy well ensures the smoothness of the generated toolpath for each lenslet, thereby effectively avoiding the destruction of the surface quality induced by the tool vibrations. In practice, this method is validated by fabricating different MOAs with aspheric and freeform structures. Compared with F/STS, the OTS method is demonstrated to be able to achieve two times larger AR values, and smoother and more uniform surface quality are simultaneously achieved.

Enabling Lithium-Metal Anode Encapsulated in a 3D Carbon Skeleton with a Superior Rate Performance and Capacity Retention in Full Cells.

Suppressing the formation of lithium (Li) dendrites is central to implementing Li-metal anode, which has gained growing attention due to its ultrahigh specific capacity and low redox potential. Here, a novel approach is adopted to deposit Li-metal within a rigid three-dimensional (3D) carbon paper (3DCP) network, which consists of a cross-link framework of carbon fibers and graphene nanosheets (GNs). This unique structure yields a uniform distribution of Li-nuclei during the preliminary stage of Li-plating and the formation of a stable solid-electrolyte interface. The as-obtained anode can deliver a high areal capacity of 10 mAh cm-2 without the dendritic formation after 1000 cycles in a Li@3DCP/LiFePO4 full cell at 4 C. In addition, the Li@3DCP anode displays low voltage platform (<20 mV at 1 mA cm-2), high plating/stripping efficiency (99.0%), and long lifespan (>1000 h). When coupled with LiNi0.8Co0.15Al0.05O2 cathode, the Li@3DCP electrode exhibits a superior rate capability up to 10 C and high temperature performance (60 °C). The unprecedented performance is attributed to the desirable combination of micro/nanostructures in 3DCP, in which carbon fiber framework provides the mechanical stability for volume change, whereas numerous lithiophilicity sites on GNs enable the suppression of Li-dendrite growth.

A Natural Biopolymer Film as a Robust Protective Layer to Effectively Stabilize Lithium-Metal Anodes.

Li metal is considered as an ideal anode for Li-based batteries. Unfortunately, the growth of Li dendrites during cycling leads to an unstable interface, a low coulombic efficiency, and a limited cycling life. Here, a novel approach is proposed to protect the Li-metal anode by using a uniform agarose film. This natural biopolymer film exhibits a high ionic conductivity, high elasticity, and chemical stability. These properties enable a fast Li-ion transfer and feasiblity to accomodate the volume change of Li metal, resulting in a dendrite-free anode and a stable interface. Morphology characterization shows that Li ions migrate through the agarose film and then deposit underneath it. A full cell with the cathode of LiFPO4 and an anode contaning the agarose film exhibits a capacity retention of 87.1% after 500 cycles, much better than that with Li foil anode (70.9%) and Li-deposited Cu anode (5%). This study provides a promising strategy to eliminate dendrites and enhance the cycling ability of lithium-metal batteries through coating a robust artificial film of natural biopolymer on lithium-metal anode.

Novel Sulfur Host Composed of Cobalt and Porous Graphitic Carbon Derived from MOFs for the High-Performance Li-S Battery.

A composite consisting of cobalt and graphitic porous carbon (Co@GC-PC) is synthesized from bimetallic metal-organic frameworks and employed as the sulfur host for high-performance Li-S batteries. Because of the presence of a large surface area (724 m2 g-1) and an abundance of macro-/mesopores, the Co@GC-PC electrode is able to alleviate the debilitating effect originating from the volume expansion/contraction of sulfur species during the cycling process. Our in situ UV/vis analysis indicates that the existence of Co@GC-PC promotes the adsorption of polysulfides during the discharge process. Density functional theory calculations show a strong interaction between Co and Li2S and a low decomposition barrier of Li2S on Co(111), which is beneficial to the following Li2S oxidation in the charge process. As a result, at 0.2C, the discharge capacity of the S/Co@GC-PC cathode is stabilized at 790 mAh g-1 after 220 cycles, much higher than that of a carbon-based cathode, which delivers a discharge capacity of 188 mAh g-1.

Layered/Spinel Heterostructured and Hierarchical Micro/Nanostructured Li-Rich Cathode Materials with Enhanced Electrochemical Properties for Li-Ion Batteries.

Although holding a high capacity, Li-rich materials are far from the demand of practical market because of their inherent drawbacks, such as poor initial efficiency and rate capability. Herein, Li-rich materials of Li1.16Mn0.6Ni0.12Co0.12O2 have been prepared via a one-step solvothermal strategy. The detail characterizations demonstrate that the as-prepared materials present morphology of nanoparticle-aggregated hierarchical microspheres and a heterostructure of layered and Li4Mn5O12-type spinel components. Compared to materials of pure-layered structure, layered/spinel heterostructured materials exhibit simultaneously great reversible capacity (302 mAh g-1 at 0.2 C), high initial Coulombic efficiency (94% at 0.2 C) and remarkable rate capability (193 mAh g-1 at 10 C).

A promising structure for fabricating high strength and high electrical conductivity copper alloys.

To address the trade-off between strength and electrical conductivity, we propose a strategy: introducing precipitated particles into a structure composed of deformation twins. A Cu-0.3%Zr alloy was designed to verify our strategy. Zirconium was dissolved into a copper matrix by solution treatment prior to cryorolling and precipitated in the form of Cu5Zr from copper matrix via a subsequent aging treatment. The microstructure evolutions of the processed samples were investigated by transmission electron microscopy and X-ray diffraction analysis, and the mechanical and physical behaviours were evaluated through tensile and electrical conductivity tests. The results demonstrated that superior tensile strength (602.04 MPa) and electrical conductivity (81.4% IACS) was achieved. This strategy provides a new route for balancing the strength and electrical conductivity of copper alloys, which can be developed for large-scale industrial application.